TEN 6-2412WIN - TRACOPOWER - Product.Network

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TEN 6WIN Series, 6 Watt

UL 60950-1

pending

Scheme

IEC 60950-1

Order code Input voltage Output voltage Output current Efﬁciency typ.

1‘500 VDC isolation 3‘000 VDC isolation range max.

TEN 6-2410WIN TEN 6-2410WIN-HI 3.3 VDC 1200 mA 77 %

TEN 6-2411WIN TEN 6-2411WIN-HI 5 VDC 1200 mA 80 %

TEN 6-2412WIN TEN 6-2412WIN-HI 12 VDC 500 mA 84 %

TEN 6-2413WIN TEN 6-2413WIN-HI 9 – 36 VDC 15 VDC 400 mA 84 %

TEN 6-2415WIN TEN 6-2415WIN-HI (24 VDC nominal) 24 VDC 250 mA 84 %

TEN 6-2421WIN TEN 6-2421WIN-HI ±5 VDC ±500 mA 80 %

TEN 6-2422WIN TEN 6-2422WIN-HI ±12 VDC ±250 mA 84 %

TEN 6-2423WIN TEN 6-2423WIN-HI ±15 VDC ±200 mA 84 %

TEN 6-4810WIN TEN 6-4810WIN-HI 3.3 VDC 1200 mA 77 %

TEN 6-4811WIN TEN 6-4811WIN-HI 5 VDC 1200 mA 80 %

TEN 6-4812WIN TEN 6-4812WIN-HI 12 VDC 500 mA 84 %

TEN 6-4813WIN TEN 6-4813WIN-HI 18 – 75 VDC 15 VDC 400 mA 84 %

TEN 6-4815WIN TEN 6-4815WIN-HI (48 VDC nominal) 24 VDC 250 mA 84 %

TEN 6-4821WIN TEN 6-4821WIN-HI ± 5 VDC ±500 mA 80 %

TEN 6-4822WIN TEN 6-4822WIN-HI ±12 VDC ±250 mA 84 %

TEN 6-4823WIN TEN 6-4823WIN-HI ±15 VDC ±200 mA 84 %

Models

Features

◆ Wide 4:1 input voltage range

◆ High efﬁciency

◆ Operating temperature range

–40°C to +85°C

◆ No minimum load required

◆ Models with 1’500 VDC and 3’000 VDC

I/O isolation (functional insulation)

◆ Input ﬁlter meets EN 55022, class A

◆ Overload protection

◆ DIP-24 plastic package

◆ Industry standard pinout

◆ 3-year product warranty

The TEN-6WIN series is designed for an optimized cost/performance ratio of

DC/DC converters with output power of 6 Watt.

General features like no minimum load requirement, overload protection, internal

ﬁlter for EN55022 class A and high efﬁciency make these converters easy to design

in. With the popular DIP-24 standard package they are also a drop in replacement

for many cost critical applications.

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TEN 6WIN Series 6 Watt

Input Specifications

Input current at no load 24 Vin models: 20 mA typ.

48 Vin models: 10 mA typ.

Input current at full load 24 Vin, 3.3VDC models: 215 mA typ.

24 Vin other models: 300 mA typ.

48 Vin, 3.3VDC models: 110 mA typ.

48 Vin other models: 150 mA typ.

Recommended input fuse (slow blow) 24 Vin models: 1500 mA

48 Vin models: 800 mA

Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC (or lower)

48 Vin models: 18 VDC / 16 VDC (or lower)

Surge voltage (1 sec. max.) 24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise EN 55022 class A

Output Specifications

Voltage set accuracy ±2 %

Regulation – Input variation Vin min. to Vin max. 0.5 % max.

– Load variation 0 – 100 % single output models: 1.2 % max.

dual output models balanced load: 1.2 % max.

dual output models 50%/100% unbalanced load: 3.0 % max.

Minimum load not required

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz Bandwidth) 80 mVp-p max.

Dynamic load response (change from 75 % to 100 % load) ±3 % peak variation typ.

300 μS response time typ.

Current limitation 150 % of Iout max. typ., constant power

Short circuit protection continuous, automatic recovery

Capacitive load 3.3 & 5.0 VDC models: 470 μF max.

12 & 15 VDC models: 100 μF max.

24 VDC models: 47 μF max.

dual output models: 100 μF max. (each output)

General Specifications

Temperature ranges – Operating –40°C to +85°C

– Case temperature +100°C max.

– Storage –50°C to +125°C

Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60°C

other models: 3.3 %/K above +70°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800‘000 h

Isolation voltage (input/output, 60 sec., functional insulation) standard models: 1’500 VDC

models with suffix -H: 3‘000 VDC

Isolation capacitance (input/output, 100 KHz, 1 V) 1000 pF typ.

Isolation resistance (input/output, 500 VDC) >1‘000 M Ohm

Switching frequency 330 kHz typ.

Page 3 of 3

Jenatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com

DC/DC Converters

TEN 6WIN Series 6 Watt

Outline Dimensions

Pin Single Dual

2–Vin (GND) –Vin (GND)

3–Vin (GND) –Vin (GND)

9No pin Common

11 No function –Vout

14 +Vout +Vout

16 –Vout Common

22 +Vin (Vcc) +Vin (Vcc)

23 +Vin (Vcc) +Vin (Vcc)

Pin-Out

Rev. 07/12.1

Speciﬁcations can be changed any time without notice.

General Specifications

Safety standards UL/cUL 60950-1, IEC/EN 60950-1

Safety approvals – CSA certificate according UL 60950-1 www.tracopower.com/products/ten6win-csa.pdf

– CB test certificate according IEC 60950-1 www.tracopower.com/products/ten6win-cb.pdf

Environmental compliance – Reach www.tracopower.com/products/ten6win-reach.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material non conductive plastic (UL 94V-0-rated)

Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated)

Weight 4.8 g ( 0.16 oz )

Soldering temperature (1.5mm from case for 10 sec.) max. 260°C

pending

911

2223

16 14

Bottom view

15.24

2.54

20.3

(0.10)

(0.60)

(0.80)

10.2 (0.40)4.1

(0.16)

2.54 15.245.08

4.5

31.8

(0.10)

(0.60)

(0.20)

(0.18)

(1.25)

Dimensions in [mm], () = Inch

Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)

Tolerances ±0.25 (±0.01)

Pin pich tolerances ±0.13 (±0.0005)

Application note: www.tracopower.com/products/ten6win-application.pdf