DC/DC Converters TEN 6WIN Series, 6 Watt C Bending p Scheme IEC 60950-1 Features Wide 4:1 input voltage range High efficiency Operating temperature range UL 60950-1 -40C to +85C No minimum load required Models with 1'500 VDC and 3'000 VDC I/O isolation (functional insulation) Input filter meets EN 55022, class A Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty The TEN-6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage Output voltage Output current Efficiency typ. 1`500 VDC isolation 3`000 VDC isolation TEN 6-2410WIN TEN 6-2410WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-2411WIN TEN 6-2411WIN-HI 5 VDC 1200 mA 80 % TEN 6-2412WIN TEN 6-2412WIN-HI 12 VDC 500 mA 84 % TEN 6-2413WIN TEN 6-2413WIN-HI 9 - 36 VDC 15 VDC 400 mA 84 % TEN 6-2415WIN TEN 6-2415WIN-HI (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421WIN TEN 6-2421WIN-HI 5 VDC 500 mA 80 % TEN 6-2422WIN TEN 6-2422WIN-HI 12 VDC 250 mA 84 % TEN 6-2423WIN TEN 6-2423WIN-HI 15 VDC 200 mA 84 % TEN 6-4810WIN TEN 6-4810WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-4811WIN TEN 6-4811WIN-HI 5 VDC 1200 mA 80 % TEN 6-4812WIN TEN 6-4812WIN-HI 12 VDC 500 mA 84 % TEN 6-4813WIN TEN 6-4813WIN-HI 18 - 75 VDC 15 VDC 400 mA 84 % TEN 6-4815WIN TEN 6-4815WIN-HI (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821WIN TEN 6-4821WIN-HI 5 VDC 500 mA 80 % TEN 6-4822WIN TEN 6-4822WIN-HI 12 VDC 250 mA 84 % TEN 6-4823WIN TEN 6-4823WIN-HI 15 VDC 200 mA 84 % http://www.tracopower.com range max. Page 1 of 3 DC/DC Converters TEN 6WIN Series 6 Watt Input Specifications Input current at no load Input current at full load 24 48 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Vin, 3.3VDC 24 Vin other Vin, 3.3VDC 48 Vin other models: models: models: models: 215 mA typ. 300 mA typ. 110 mA typ. 150 mA typ. Recommended input fuse (slow blow) 24 Vin models: 1500 mA 48 Vin models: 800 mA Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC (or lower) 48 Vin models: 18 VDC / 16 VDC (or lower) Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 class A Output Specifications Voltage set accuracy 2 % Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100 % single output models: dual output models balanced load: dual output models 50%/100% unbalanced load: 0.5 % max. 1.2 % max. 1.2 % max. 3.0 % max. Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 80 mVp-p max. Dynamic load response (change from 75 % to 100 % load) 3 % peak variation typ. 300 S response time typ. Current limitation 150 % of Iout max. typ., constant power Short circuit protection continuous, automatic recovery Capacitive load 3.3 & 5.0 VDC 12 & 15 VDC 24 VDC dual output models: models: models: models: 470 F max. 100 F max. 47 F max. 100 F max. (each output) General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -50C to +125C Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60C other models: 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >800`000 h Isolation voltage (input/output, 60 sec., functional insulation) standard models: 1'500 VDC models with suffix -H: 3`000 VDC Isolation capacitance (input/output, 100 KHz, 1 V) 1000 pF typ. Isolation resistance (input/output, 500 VDC) >1`000 M Ohm Switching frequency 330 kHz typ. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 6WIN Series 6 Watt General Specifications Safety standards UL/cUL 60950-1, IEC/EN 60950-1 g - CSA certificate according UL 60950-1 www.tracopower.com/products/ten6win-csa.pdf din n - CB test certificate according IEC 60950-1 www.tracopower.com/products/ten6win-cb.pdf pe Safety approvals Environmental compliance - Reach www.tracopower.com/products/ten6win-reach.pdf - RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non conductive plastic (UL 94V-0-rated) Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated) Weight 4.8 g (0.16 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260C Application note: www.tracopower.com/products/ten6win-application.pdf Outline Dimensions (0.60) (0.80) Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No pin Common 11 No function -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (1.25) 4.1 4.5 (0.18) 2.54 (0.10) 15.24 (0.60) 5.08 (0.20) (0.16) 10.2 (0.40) 31.8 14 2.54 16 15.24 Bottom view 23 22 Pin-Out 11 20.3 9 (0.10) 2 3 Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.25 (0.01) Pin pich tolerances 0.13 (0.0005) Specifications can be changed any time without notice. Rev. 07/12.1 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3