NICKEL METAL HYDRIDE BATTERIES: INDIVIDUAL DATA SHEET H H R1 60AA/B Cylindrical AA size (HR 15/51) Typical Charge Characteristics Dimensions (with Tube) (mm) 2.0 1.9 1.8 17 S 16 & 1.5 214.528; 5 14 ? 1.3 1.2 o- i a 0.9 airs 10 20 30.040 50 60 70 80 90 6100 Discharge Time (minutes) 50.5125 Typical Discharge Characteristics 8 Charge: 1500mA(1 It)<1.2hrs,20C 1.7 DischargeTemperature: 20C 1.6 1.5 = 1.4 - x 3 1.3 (-) S12 44 Specifications "0 09 310mA(0.2 It) mm inch 08 Diameter 14.5 +0/-0.7 0.57 +0 /-0.03 0 ' a 3 4 5 . Height 50.0 +0/ 1.0 1.97 +0 /-0.04 Discharge Time (hours) Approximate Grams Ounces Weight 31 1.09 Nominal Voltage 1.2V - Charge: 1500mA(1 It)x<1.2hrs,20C ak DischargeT emperature: 20C Discharge Average 1600mAh Capacity Rated (Min.) 1550mAh j g Approx. Internal impedance 2amo 8 at 1000Hz at charged state. Standard 155mA (0.18) x 16hrs. Charge Rapid 1500mA (tit) x 1.2hrs. c F Qo Charge Standard OC to 45C | 32F to 113F 5 3 Rapid 0C to 40C | 32F to 104F z 2 Discharge -10C to 65C | 14F to 149F zt 5 <1 years -20C to 35C | -4F to 95F F | Storage | <3 months | -20C to 45C | -4F to 113F <1 month -20C to 55C | -4F to 131F * After charging at 0.1It for 16 hours, discharging at 0.2It. For reference only. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge / discharge specs, warning label contents and unit design. Note: [It] was previously expressed as [C]. [It] is an IEC standard expression for the amount of charge or discharge current and is expressed as: It(A) = Cn (Ah)/th. [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours. n= the time base [hours] for which the rated capacity is declared Panasonic : 0 10 20 30 40 50 60 70 80 Discharge Time (minutes) NICKEL METAL HYDRIDE HANDBOOK