REV. Status REVISION 07/23/96 TS REVISION A REFORMATTED 08/14/96 TS REVISION B REFORMATTED 07/15/97 TS REVISION C CHANGED A.7. 08/20/99 TS THREE FLANGE SINGLE PRIMARY 12.0VA PC BOARD POWER TRANSFORMER A. Electrical Specifications (@ 25C) Secondary AaB AN > Maximum Power: Input Voltage Voltage Regulation: 12.0 VA and Frequency: 115V 50/60 Hz oltage: See Table A 19% TYP @ full load to no load Temperature Rise: 45C TYP (50C MAX allowed) Insulation Resistance: 100 MQ MIN @ 500VDC, Pri to Sec, Pri to Core 100 MQ MIN @ 500VDC, Sec to Core N HiPot: 2500 Vrms 1 minute @ Pri to Sec 1500 Vrms 1 minute @ Pri to Core 1500 Vrms 1 minute @ Sec to Core 500 Vrms 1 minute @ Sec to Sec B. Marking: TAMURA, Tamura part number (see sheet 2), MICROTRAN, Microtran part number (see sheet 2), date code, country of origin, safety logos and input and output ratings C. Safety: Insulation Class B (130C) File No. 92957 CSA 22.2 Nos. 0 and 66, File No. LR69808 UL 1585, Class Il and Ill, F ile No. E95844 UL 506, General Purpose, File No. E91239 D. Mechanical Specifications: (___._) GB A MODEL NUMBER | 3FS-5XX & PSS5-XX | -| 41.52(1.635) MAX -e QUALITY CONTROL: D. Kelley CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 43352 909 699-1270 FAX 9096769482 TAMURA CORPORATION OF AMERICA USINESS PARK DRIVE, TEMECULA, CA. 92590-6624 38.0(1.5) MAX 1 2 3 4 | PL 4.8+0.8(0.19+0.03) 0.5(0.018) 6 PLACES 1.04(0.041) 6 PLACES SMW (ies \ fe _ a a 48.5 +1.02(1.91 +0.04) F B otoa18) 3) i 2 PLACES ) a N ) L iy lh a a iy PREPARED BY: | 32.0 +0.3(1.26 +0.012)1 D. Rund ENGINEER: DRAWING CONTROL NO.] REV MODEL_ DESCRIPTION MODEL SPECIFICATION PA111648 SIZE 5 3FS & PSS FAMILY T.. Shiozawa ACAD\ 3F\A1116481.DWG C POWER TRANSFORMER SFS-SXX & PSSS-XX DIM: mm(In} SCL: NONE | SH: 1 0F 2 APPROVED: D. Kelley PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA ETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN R AND SALE. CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. REV. Status REVISION 07/23/96 TS REVISION A REFORMATTED 08/22/96 TS REVISION B REFORMATTED 07/15/97 TS REVISION C CHANGED A.7. 08/20/99 TS E. Mounting Footprint: F. Schematic Diagram: PRI 1 J 4 |/- L414 PARALLEL CONNECTION SEC 5 e 6 c. 35.82(1.41) | Bo & 6 10.16(0.40) 1 7,62(0.30) 2 PLACES SERIES CONNECTION MODEL NUMBER | 3FS-5XX & PSS5-XX | SERIES CONNECTION WITH CENTERTAP -O _-Q AC AC AC ys OUTPUT ___| ouTPUT te OUTPUT _-O -O G. Table A: (NOTE: All parts are dual marked with both part numbers) C ACAD\ 3F\A1116482.DWG T. Shiozawa QUALITY CONTROL D. Kelley *] CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 43352 909 TAMURA |MICROTRAN| PARALLEL CONNECTION | SERIES CONNECTION | SERIES CONNECTION WITH CT PART NO.| PART NO. | Ac VOLTS | RMS AMPS |AC VOLTS |RMS AMPS} AC VOLTS =|RMS AMPS 3FS510 | PSS510 5.0 2.4 10.0 1.2 5.0CT5.0 1.2 3FS512 | PSS5-12 6.3 2.0 12.6 1.0 6.3-CT-6.3 1.0 3FS516 | PSS5-16 8.0 1.6 16.0 0.8 8.0CT-8.0 0.8 3FS520 |PSS520 | 10.0 1.2 20.0 0.6 10.0-CT-10.0 | 0.6 3FS524 |PSS5-24 | 12.0 1.0 24.0 0.5 12.0-CT-12.0 | 0.5 3FS528 |PSS5-28 | 14.0 0.84 28.0 0.42 | 14.0-CT-14.0 | 0.42 3FS536 |PSS5-36 | 18.0 0.7 36.0 0.35 | 18.0-CT-18.0 | 0.35 3FS548 |PSS5-48 | 24.0 0.5 48.0 0.25 | 24.0-CT-24.0 | 0.25 PREPARED By: |3FS556 |PSS5-56 | 28.0 0.44 56.0 0.22 | 28.0-CT-28.0 | 0.22 D. Rund 3FS5120| PSS5120] 60.0 0.2 120.0 0.1 60.0CT60.0 | 0.1 ENGINEER: OR T848 REV sMPDEL, PE SELPTION MODEL SPECIFICATION POWER TRANSFORMER TAMURA CORPORATION OF AMERICA USINESS PARK DRIVE, TEMECULA, CA. 92590-6624 699-1270 FAX 9096769482 SFS-SXX & PSSS-XX DIM: mm(In} SCL: NONE | SH: 2 0F 2 APPROVED: D. Kelley PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. TH CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. IS_DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN