Memory Module Specifications KVR800D2N6/2G 2GB 2Rx8 256M x 64-Bit DDR2-800 CL6 240-Pin DIMM DESCRIPTION SPECIFICATIONS This document describes ValueRAM's 256M x 64-bit Clock Cycle Time (tCK) 2.5ns (min.) / 8ns (max.) (2GB) DDR2-800 CL6 SDRAM (Synchronous DRAM) 2Rx8 memory module, based on sixteen 128M x 8-bit Row Cycle Time (tRCmin) 60ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 127.5ns (min.) Row Active Time (tRASmin) 45ns (min.) / 70,000 (max.) Single Power Supply of +1.8V (+/- .1V) Power Operating 2.016 W (Approx.*) UL Rating 94 V - 0 FBGA components. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows: *Power will vary depending on the SDRAM used. Note: The module described in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. Figure 1: KVR800D2N6/2G 240-Pin DIMM (Units= millimeters) Document No. VALUERAM0598-001.B00 10/20/11