TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors FEATURES * Conductive polymer electrode, multianode design * Benign failure mode under recommended use conditions LEAD-FREE COMPATIBLE COMPONENT * Extremely Low ESR SnPb termination option is not RoHS compliant. * 3x reflow 260C compatible * Volumetric efficiency Elektra Award 2010 * High frequency capacitance retention APPLICATIONS * Telecommunication routers * Basestations with high power DC/DCs CASE DIMENSIONS: millimeters (inches) MARKING E, V CASE Code AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 337 = 330F 337 A XXXXX EIA Code EIA Metric L0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H+0.20 (0.008) -0.10 (0.004) W1 0.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. Rated Voltage A = 10V ID Code HOW TO ORDER TCM E 108 M 004 R 0010 E Type Case Size See table above Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = 20% Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc 100 = 100Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel H = Tin Lead 7" Reel K = Tin Lead 13" Reel ESR in m Additional Character E = Black resin TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Reliability: Termination Finish: All technical data relate to an ambient temperature of +25C 10F to1000F 20% 0.1CV -55C to +125C 1% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level Sn Plating (standard) and SnPb Plating NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042920 211 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 477 680 687 1000 108 2.5V (e) 4V (G) E(10,12) E(10,12) E(6,10,12) 6.3V (J) E(10,12) E(10,12) E(6,8,10,12) E(10,15) E(7,10,12) E(12) 10V (A) Rated Voltage DC (VR) to 85C 16V (C) 20V (D) E(25) E(25,40) E(25,40) E(15, 25) E(25) E(10,15) E(15, 25) E(25) E(25) 25V (E) E(60) E(60) E(50) 35V (V) 50V (T) E(100) E(75) E(25) E(60) E(45,60) 100V (A) V(50) Released ratings, (ESR ratings in mOhms in parentheses) Engineering samples - please contact AVX Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE 212 AVX Part No. Case Size Capacitance (F) Rated Voltage (V) TCME477M002#0010E TCME477M002#0012E TCME687M002#0010E TCME687M002#0012E TCME108M002#0006E TCME108M002#0010E TCME108M002#0012E E E E E E E E 470 470 680 680 1000 1000 1000 2.5 2.5 2.5 2.5 2.5 2.5 2.5 TCME477M004#0010E TCME477M004#0012E TCME687M004#0010E TCME687M004#0012E TCME108M004#0006E TCME108M004#0008E TCME108M004#0010E TCME108M004#0012E E E E E E E E E 470 470 680 680 1000 1000 1000 1000 4 4 4 4 4 4 4 4 TCME337M006#0010E TCME337M006#0015E TCME477M006#0007E TCME477M006#0010E TCME477M006#0012E TCME687M006#0012E E E E E E E 330 330 470 470 470 680 6.3 6.3 6.3 6.3 6.3 6.3 TCME227M010#0025E TCME337M010#0010E TCME337M010#0015E TCME477M010#0015E TCME477M010#0025E E E E E E 220 330 330 470 470 10 10 10 10 10 TCME107M016#0025E TCME157M016#0025E TCME157M016#0040E TCME227M016#0025E TCME227M016#0040E TCME337M016#0015E TCME337M016#0025E E E E E E E E 100 150 150 220 220 330 330 16 16 16 16 16 16 16 TCME686M020#0025E TCME107M020#0025E E E 68 100 20 20 Maximum Operating Temperature (C) DCL Max. (A) 2.5 Volt @ 105C 125 117.5 125 117.5 125 170 125 170 125 250 125 250 125 250 4 Volt @ 105C 125 188 125 188 125 272 125 272 125 400 125 400 125 400 125 400 6.3 Volt @ 105C 125 198 125 198 125 282 125 282 125 282 125 408 10 Volt @ 105C 125 220 125 330 125 330 125 470 125 470 16 Volt @ 105C 125 160 125 240 125 240 125 352 125 352 125 528 125 528 20 Volt @ 105C 125 136 125 200 DF Max. (%) ESR Max. @ 100kHz (m) 10 10 10 10 10 10 10 100kHz RMS Current (mA) 85C 125C 10 12 10 12 6 10 12 6400 5800 6400 5800 8300 6400 5800 4500 4100 4500 4100 5800 4500 4100 1600 1500 1600 1500 2100 1600 1500 3 3 3 3 3 3 3 8 8 8 8 8 8 8 8 10 12 10 12 6 8 10 12 6400 5800 6400 5800 8300 7200 6400 5800 4500 4100 4500 4100 5800 5000 4500 4100 1600 1500 1600 1500 2100 1800 1600 1500 3 3 3 3 3 3 3 3 8 8 10 10 10 8 10 15 7 10 12 12 6400 5200 7700 6400 5800 5800 4500 3600 5400 4500 4100 4100 1600 1300 1900 1600 1500 1500 3 3 3 3 3 3 8 8 8 10 10 25 10 15 15 25 4000 6400 5200 5200 4000 2800 4500 3600 3600 2800 1000 1600 1300 1300 1000 3 3 3 3 3 8 8 8 8 8 8 8 25 25 40 25 40 15 25 4000 4000 3200 4000 3200 5200 4000 2800 2800 2200 2800 2200 3600 2800 1000 1000 800 1000 800 1300 1000 3 3 3 3 3 3 3 8 8 25 25 4000 4000 2800 2800 1000 1000 3 3 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042920 MSL 45C TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors AVX Part No. Case Size Rated Voltage (V) Capacitance (F) Maximum Operating Temperature (C) DCL Max. (A) DF Max. (%) ESR Max. @ 100kHz (m) 100kHz RMS Current (mA) 45C 85C 125C MSL 25 Volt @ 105C 125 82.5 8 60 2600 1800 700 3 125 117.5 8 60 2600 1800 700 3 125 170 8 50 2900 2000 700 3 35 Volt @ 105C TCME226M035#0025E E 22 35 125 77 8 25 4000 2800 1000 3 TCME336M035#0060E E 33 35 125 115.5 8 60 2600 1800 700 3 TCME476M035#0045E E 47 35 125 164.5 8 45 3000 2100 800 3 TCME476M035#0060E E 47 35 125 164.5 8 60 2600 1800 700 3 50 Volt @ 105C TCME156M050#0100E E 15 50 125 75 10 100 2000 1400 500 3 TCME226M050#0075E E 22 50 125 110 10 75 2300 1600 600 3 100 Volt @ 105C TCMV106M100#0050E V 10 100 125 100 8 50 2900 2000 700 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 276. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. TCME336M025#0060E TCME476M025#0060E TCME686M025#0050E E E E 33 47 68 25 25 25 RECOMMENDED DERATING FACTOR For Vr 10V Voltage and temperature derating as percentage of Vr. 100% 95% For Vr 16V 100% Rated Voltage 95% 90% Rated voltage 10V 16V Operating Temperature 85C 105C 125C 90% 90% 60% 80% 80% 54% 85% 80% Rated Voltage 90% Recommended Application Voltage 85% 80% 75% 75% 70% 67% 65% 60% 60% 70% 60% 55% 50% 50% 85C 105C 67% 65% 55% -55% Recommended Application Voltage 125C 54% -55% 85C 105C 125C QUALIFICATION TABLE TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Condition TCM series (Temperature range -55C to +125C) Characteristics Apply rated voltage (Ur) at 105C and category voltage (Uc) at 125C for 2000 hours through a circuit impedance of 0.1/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 125C, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65C and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 TemperatureC +20 -55 +20 +85 +125 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x category voltage (Uc) at 125C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge/ discharge resistance of 1000 Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR no visible damage 1.25 x initial limit within 20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 2 x initial limit within 20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 3 x initial limit within +30/-20% of initial value 1.5 x initial limit 2 x initial limit +20C -55C +20C DCL IL* n/a IL* C/C n/a +0/-20% 10% +20/-0% +30/-0% 10% DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* Visual examination DCL C/C DF +85C +125C 10 x IL* 12.5 x IL* +20C IL* no visible damage initial limit within +20/-30% of initial value 1.25 x initial limit *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85C for 24 hours. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042920 213 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors SOLID ELECTROLYTIC CAPACITOR ROADMAP CONDUCTIVE POLYMER CONVENTIONAL TANTALUM NIOBIUM OXIDE TC Series T Cx T Series T xx N Series N xx F Series F38 F Series F xx CATHODE - DIELECTRIC ANODE - conductive polymer Ta2O5 + - MnO2 MnO2 Ta2O5 + Tantalum Nb2O5 Niobium Oxide + Tantalum FIVE CAPACITOR CONSTRUCTION STYLES J-lead Undertab TACmicrochip(R) Conformal Hermetic SERIES LINE UP : Conductive Polymer High Rel. & Special Industrial & Automotive TCH TCB hermetics COTS+ Hermetically sealed TCO TCQ high temp AEC-Q200 Standard Standard Low Profile High Energy 214 TCJ F38 TCN miniature undertab low profile undertab TCS COTS+ multianode TCM multianode Lowest ESR J-CAPTM low profile undertab The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042920