ZLH
SERIES
ZLH
♦SPECIFICATIONS
♦MULTIPLIER FOR RIPPLE CURRENT
(1)Frequency coefficient
Category Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current(MAX)
Dissipation Factor(MAX)
Endurance
Low Temperature Stability
Impedance Ratio(MAX)
Items Characteristics
-40~+105°C
6.3~35V.DC
±20%(20°C,120Hz)
I=0.01CV or 3µA whichever is greater. (After 2 minutes)
I=Leakage Current(µA) C=Rated Capacitance(µF) V=Rated Voltage(V)
Rated Voltage
(V)
tanδ 0.22
6.3
0.19
10
0.16
16
0.14
25
0.12
35
Leakage Current
Dissipation Factor
Capacitance Change Within ±25% of the initial value. (6.3v,10v : ±30%)
Not more than 200% of the specified value.
Not more than the specified value.
After life test with rated ripple current at conditions stated in the table below, the capacitors shall meet the following requirements.
When rated capacitance is over 1000
µ
F,
tanδ
shall be added 0.02 to the listed value with increase of every 1000
µ
F.
(2)Temperature coefficient
Ambient Temperature
(°C)
Coefficient
105 85 65>
=
1.0 1.7 2.1
(20°C,120Hz)
(120Hz)
105°C Miniaturized, Long Life, Low impedance.
♦FEATURES
• Achieved endurance improvement and miniaturization of ZL series, as well as high
frequency impedance reduction.
• Load Life : 105°C 5000~6000hours.
Case sizeLife Time
(hrs)
φD 6.3 5000
φD>
= 8 6000
Rated Voltage
(V)
Z(-40°C)/Z(20°C)
Z(-25°C)/Z(20°C) 3
6.3
3
10
3
16
3
25
3
35
22222
♦PART NUMBER
Rated Voltage ZLH
Series Option
Lead Forming
DxL
Case Size
Rated Capacitance Capacitance Tolerance
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
<
=
Frequency
(Hz) 120 1k 10k
100k
<
=
Coefficient
0.50 0.73 0.92 1.0047~270µF0.55 0.77 0.94 1.00330~680µF0.60 0.80 0.96 1.00820~1800µF 0.70 0.85 0.98 1.00
2200~8200
µF
NEW
30 Nov. 2001