12 11 10 9 8 7 5 4 3 2 1 COLOR = BLACK COLOR = NATURAL NOTES: TIN PLATING GOLD PLATING TIN PLATING 1. MATERIAL: HOUSING - LIQUID CRYSTAL POLYMER (LCP), COLOR: SEE CHART. TRAY PACK | TAPE & REEL TRAY PACK TAPE & REEL TRAY PACK wan npN TERMINAL - BRASS CKT | MATERIAL MATERIAL DIM "A DIM "B SIZE} NUMBER | NUMBER NUMBER NUMBER NUMBER 2. TERMINAL PLATING: TIN = .000100/0.00254 MATTE TIN OVER 4 46991-1004] | 46991-4004 | x] 46991-2004 46991-3004 38/9.6 165/4.20 0000507 0.00127 NICKEL OVERALL 6 46991-1006] x| 46991-4006 | x| 46991-2006 | x| 46991-3006 54/13.8 | .331/8.40 GOLD= .000030/0.00076 MIN. SELECT GOLD OVER 8 46991-1008] | 46991-4008 46991-2008 46991-3008 71/18.0 | .496/12.60 000100/0.00254 MIN. SELECT MATTE TIN OVER 10 | | 46991-1010] | 46991-4010 | x| 46991-2010 | x| 46991-3010| x| 46991-1110 87/22.2_ | .661/16.80 -000050/0.00127 MIN NICKEL OVERALL 12 | | 46991-1012] X| 46991-4012 46991-2012 | X| 46991-3012 1.04/26.4 | .827/21.00 3. PRODUCT SPECIFICATION: PS-5556-001 OR PS-45750-001. 14 |X| 46991-1014] x| 46991-4014 | X| 46991-2014] x| 46991-3014 1.21/30.6 | .992/25.20 4, PACKAGING SPECIFICATION: TRAY PACKED PER PK-5569-003 OR 16 |X| 46991-1016] X| 46991-4016 | X| 46991-2016 | X| 46991-3016 1.37/34.8 | 1.160/29.40 TAPE AND REEL PACKAGED PER PK-46991-001. 18 |x| 46991-1018] x| 46991-4018 | x| 46991-2018] x| 46991-3018 1.54/39.0 | 1.323/33.60 5. PART MATES WITH MINIFIT JR RECEPTACLE SERIES 5557 20 | X| 46991-1020] X | 46991-4020 | X| 46991-2020 | X| 46991-3020 1.70/43.2 | 1.488/37.80 6. DISCOLORIZATION IN THE BANDOLIER CARRIER AREA OF THE PIN IS 22 |X| 46991-1022! X| 46991-4022 | X| 46991-2022 | X| 46991-3022 1.87/47.4 | 1.654/42.00 INHERENT TO THE PLATING PROCESS AND IS DUE TO THE MASKING EFFECT 24 46991-1024 46991-4024 | X| 46991-2024 | X} 46991-3024 2.03/51.6 1.819/46.20 OF THE CARRIER. THIS DISCOLORIZTION IS A NON-FUNCTIONAL AREA OF THE PIN AND WILL NOT AFFECT THE PERFORMANCE OF THE HEADER ASSEMBLY. SEE SHEET 2 FOR PART June oe NOD MBS 7. CONNECTORS ARE NOT TO BE MATED OR UNMATED WHILE CIRCUITS ARE LIVE. LAST CKT 8. PARTS ARE NOT DESIGNED FOR CURRENT SHARING. DIM "A" 9. PART IS INTENDED FOR PIN IN PASTE REFLOW SOLDER ONLY. 098 won 935 10.TO AVOID INTERFERENCE BETWEEN THE RECEPTACLE AND PCB. HEADER MUST 350 DIM "B'REF 13.60 BE PLACED AT THE EDGE OF PCB AS SHOWN. SEE 11.PIN RETENTION IN HOUSING IS 2.2 LBS/1 KG MIN. BOTH \ ro NOTE 13 DIRECTIONS FOR TIN PLATING. ( N PIN RETENTION IN HOUSING IS 1.0 LBS/0.45 KG MIN. BOTH DIRECTIONS FOR GOLD PLATING. J d J 378 12. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC 7 NF \==/ 9.60 SPECIFICATION PS-45499-002. 13.FORMING MARKS ON PINS ARE ACCEPTABLE. Ne NV LAN LSA | } AXCIRCUITS SHOWN PROVIDE THE MATE-FIRST/BREAK-LAST FEATURE. . \ SEE CHART ON SHEET 2 FOR SPECIFIC CIRCUIT LOCATIONS. 165 PITCH REF l l l | ! l l l 15.TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON 4.20 Y PART NUMBER AND/OR TOOL. CKT 2 .130+.030 TYP @D.071+.002 165 PITCH REF __ __| |. .042 sa. TYP. 3.300.76 DIM "Bi*.004 1.8020.05 4.20 1.07 579+.015 | _-217+.015 LAST CKT TYP. 14.70+0.38 5.50+0.38 NH aA A A CKT 1 INDICATOR YT WW VW eo .217+.004TYP. a CKT1 5.50+0.10 5; MD OF MW Ha vA ' YOY YY YY VY .1654+.004TYP. NON-ACCUM. _ 4.200+0.10 |! q SEE NOTE 10 RECOMMENDED PCB HOLE LAYOUT FOR .070/1.78 MAX THICK P.C. BOARD VIEWED FROM COMPONENT SIDE DIM "B"REF SYMBOLS [1H!S DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION WV DIMENSION UNITS SCALE CURRENT REV DESC: REMOVE 8CKT X MARK = IN/MM 4:1 i \/ = 0 GENERAL TOLERANCES mo ex (UNLESS SPECIFIED) /= 0 wm] INCH |EC NO: 609247 MINIFIT RTC RIGHT ANGLE WV = Q |4PLACES |: t DRWN: SALHAMY 2018/12/17 HEADER ASSEMBLY W/O MOUNTING PEGS ___ [spuaces | : 001 |CHK'D: DSTEIER 2018/12/21 Vv = 0 2PLACES |: 0.25 |: 0.015|]APPR: FSMITH 2018/12/22 PRODUCT CUSTOMER DRAWING W/ = O|1PLACE |: 0.38 |: INITIAL REVISION: DOCUMENT NUMBER DOC TYPE] DOC PART] REVISION = 9 |O PLACES [: ! DRWN: JKLOSTERMEIE 2008/12/19 KX ANGULARTOL : 05 |APPR: FSMITH 2008/12/15 SD-46991-001 PSD} 000/010 M-o DRAFT WHERE APPLICABLE THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER DOCUMENT STATUS| P1 | RELEASE DATE | 2018/12/22 21:22:14 y= 0 WITHIN DIMENSIONS 4 |c-size| 46991 | seeECHART | GENERALMARKET| 10F2 49 11 10 9 8 7 6 5 4 3 2 1 12 11 10 9 8 7 6 5 4 3 2 1 MATERIAL NO PKG PLATING PIN IDENTIFICATION CODE 7 CIRCUIT LOCATION (SEE CHART BELOW) V=VOID OF NUMBER | ayy SEENOTE | cKT | CKT| CKT| CKT| CKT | CKT | CKT | CKT | CKT] CKT| CKT) CKT] CKT| CKT) CKT| CKT| CKT] CKT] CKT | CKT | CKT | CKT | CKT | CKT #2 | 2 3 4 5 6 f 8 9 IO | | I2 i) I4 I5 I6 l7 I8 I9 20 2 | 22 23 24 46991-5001 06 | TRAY TIN 2 V 2 2 V 2 46991-5002 | 04 |TRAY TIN | 2 | | PIN MATING ID CONFIGURATION 06 | MATE FIRST/BREAK LAST LAST CIRCUIT 45 (LONGER) MFBL CIRCUIT 4)\ Td 2 STANDARD MATING | tT Ci] 7 ~ wN C \ 0 qq WY NY NSF L Trae A _____] Y, T Y, , Y, SDE DIM "A" DIM "B" CIRCUIT 1 4 .38/9.6 .165/4.20 CIRCUIT 2 6 54/13.8 | .331/8.40 8 71/18.0 | .496/12.60 10 .87/22.2 | .661/16.80 12 1.04/26.4 | .827/21.00 14 1.21/30.6 | .992/25.20 16 1.37/34.8 | 1.160/29.40 18 1.54/39.0 | 1.323/33.60 20 | 1.70/43.2 | 1.488/37.80 22 | 1.87/47.4 | 1.654/42.00 24 | 2.03/51.6 | 1.819/46.20 SYMBOLS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION W DIMENSION UNITS SCALE CURRENT REV DESC: REMOVE 8CKT X MARK = O/INMM| 4:1 i \/= 0 GENERAL TOLERANCES mo ex (UNLESS SPECIFIED) /= 0 MM] INCH] EC NO: 609247 MINIFIT RTC RIGHT ANGLE W = 0 [Apuaces ! DRWN: SALHAMY 2018/12/17 HEADER ASSEMBLY W/O MOUNTING PEGS ___ [spuaces |: : 0.01 |CHK'D: DSTEIER 2018/12/21 V~ leptaces |: 025 |: 0016 | APPR: FSMITH 2018/12/22 PRODUCT CUSTOMER DRAWING W = 0 |1PLACE |: 0.38 | INITIAL REVISION: DOCUMENT NUMBER DOC TYPE] DOC PART] REVISION = g [oPLaces |: : DRWN: JKLOSTERMEIE 2008/12/19 es ANGULARTOL + 05 |APPR: FSMITH 2008/12/15 SD-46991-001 PSD} 000 | C10 M-o DRAFT WHERE APPLICABLE THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER DOCUMENT STATUS| P1 | RELEASE DATE | 2018/12/22 21:22:14 y= 0 WITHIN DIMENSIONS 4 |c-size| 46991 | seeECHART | GENERALMARKET| 20F2 ORMAT: Eng-lega-master-to-prod-C REVISION: D 1 2 DATE: 2018/01/18 11 10 9 8 7 6 5 4 3 2 1