SPEC NO: DSAD0327 REV NO: V.9 DATE: APR/21/2010 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.ZHou ERP: 1203000037
1.6X0.8mm PHOTOTRANSISTOR
Part Number: KP-1608P1C
Features
z1.6mmX0.8mm SMT LED, 1.1mm thickness.
zMechanically and spectrally matched to infrared emitting
LED lamp.
zWater clear lens.
zPackage: 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
Made with silicon phototransistor chips.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.1(0.004") unless otherwise noted
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0327 REV NO: V.9 DATE: APR/21/2010 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.ZHou ERP: 1203000037
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25° C
Symbol Parameter Min. Typ. Max. Units Test Conditions
VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100uA
Ee=0mW/c ㎡
VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100uA
Ee=0mW/c ㎡
VCE (SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA
Ee=20mW/c ㎡
I CEO Collector Dark Current 100 nA VCE=10V
Ee=0mW/c ㎡
TR Rise Time (10％ to 90％ ) 15 us
VCE = 5V
IC=1mA
RL=1000Ω
TF Fall Time (90％ to 10％ ) 15 us
I (ON) On State Collector Current 0.1 0.3 mA
VCE = 5V
Ee=1mW/c ㎡
λ=940nm
2θ1/2 Viewing Angle 120 deg
Parameter Max.Ratings
Collector-to-Emitter Voltage 30V
Emitter-to-Collector Voltage 5V
Power Dissipation at (or below) 25°C Free Air Temperature 100mW
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD0327 REV NO: V.9 DATE: APR/21/2010 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.ZHou ERP: 1203000037
KP-1608P1C
Recommended Soldering Pattern
(Units : mm; Toleranc e: ± 0.1)
Tape Specifications
(Units : mm)
Reflow soldering is recommended and the sold ering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
SPEC NO: DSAD0327 REV NO: V.9 DATE: APR/21/2010 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.ZHou ERP: 1203000037
PACKING & LABEL SPECIFICATIONS KP-1608P1C
