LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING
( Ta = 25°C )
PARAMETER SYMBOL RATING UNIT
Forward Current IF 60 mA
Reverse Voltage VR 6 V
INPUT
Power Dissipation P 100 mW
Collector - Emitter Voltage VCEO 30 V
Emitter - Collector Voltage VECO 7 V
Collector - Base Voltage VCBO 70 V
Collector Current IC 100 mA
OUTPUT
Collector P ower Dissipation PC 300 mW
T otal Power Dissipation Ptot 350 mW
4N35-V series 3,550
*1 Isolation Voltage 4N37-V series Viso 1,500 Vrms
Operating Temperature Topr -55 ~ +100 °C
Storage Temperature Tstg -55 ~ +150 °C
*2 Soldering Temperature Tsol 260 °C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector,
emitter and base on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. : 4N35 / 4N37 ( M, S, STA1 )-V DATA SHEET Page : 6 of 10
BNS-OD-C131/A4