Never stop thinking.
Product Brief
The SDFE-4/2/1 are the latest members of Infineon’s 2nd generation
SOCRATES® family of SHDSL transceivers designed for pure TDM
applications.
The SDFE-4/2/1 features full compliance with the ETSI TS 101524
and the ITU G.991.2 (G.SHDSL/G.SHDSL.bis) standards. Advanced
system functionality and cost saving features continue to provide
significant low BOM advantages in the SOCRATES tradition.
These features, in combination with an unprecedented power
consumption of approximately 500 mW per channel, and a very
small footprint, make the SDFE-4/2 excellent solutions for remote
powered repeater designs.
Applications
■ISDN primary rate access replacement
■SHDSL repeater/regenerator
■Digital Loop Carrier (DLC) Systems
■Extended range full and fractional E1/T1
■RITL and WLL systems
■Wireless infrastructure
■SDH and SONET termination
■TU-12 transport
■Leased line services
■PBX trunk lines
Features
■Fully integrated 4/2/1 channel transceiver solution, including DSP,
microcontroller, analog front end (AFE), line driver and memory,
in a single integrated chip
■Support of payload data rates from 144 kbit/s up to 6.392 kbit/s
with 8 kbit/s granularity (exceeding G.SHDSL.bis)
■M-pair functionality integrated
■Tunable hybrid for optimal loop adaptation and reach
■Only a few external passive components required
www.infineon.com/products
SDFE-4/2/1
Symmetric DSL Front End, 4/2/1
Channel
SDFE-4, PEF 24624 E
SDFE-2, PEF 22624 E
SDFE-1, PEF 21624 E
Wireline Communications
Loop Interface
■Line probing according ITU-T G.991.2
(2004)
■Flexible setting of PSD shaping
■Highly sophisticated TC-PAM line coding
■Programmable framer
■Supported TDM clocks: 1.544 MHz,
2.048 MHz, 2.312 MHz, 4.096 MHz,
8.192 MHz, 16.384 MHz
EOC
■4/2/1 integrated HDLC controllers for EOC
handling (one per channel)
■128-byte FIFO for transmit and receive
direction per channel
Customer Interface
■Universal TDM interface
■Bit-serial interface
Modes
■Line termination unit LTU (STU-C)
■Network termination unit NTU (STU-R)
■Regenerator unit COT/RT (SRU-C/R)
Physical Characteristics
■Only two power supplies: 3.3 V, 1.8 V
■Power consumption approximately 500 mW
per channel
■Temperature range -40°C to +85°C
■Package P-LBGA-324 (19 mm x 19 mm)
■SDFE-4/2/1 are pin and software compatible