Gap Filler 1500 (Two-Part) Thermally Conductive Liquid Gap Filling Material Features and Benefits TYPICAL PROPERTIES OF GAP FILLER 1500 * Thermal conductivity: 1.8 W/mK PROPERTY Color / Part A IMPERIAL VALUE Yellow METRIC VALUE Yellow * Optimized shear thinning characteristics for ease of dispensing Color / Part B White White Visual Viscosity, High Shear (Pa-s)(1) 25 25 ASTM D5099 * Excellent slump resistance (stays in place) Density (g/cc) 2.7 2.7 ASTM D792 Mix Ratio 1:1 1:1 -- * Ultra-conforming with excellent wet-out for low stress interface applications Shelf Life @ 25C (months) 6 6 -- PROPERTY AS CURED Color Yellow Yellow Visual Hardness (Shore 00)(2) 50 50 ASTM D2240 * 100% solids - no cure by-products * Excellent low and high temperature mechanical and chemical stability Heat Capacity (J/g-K) 1.0 1.0 ASTM D1269 -76 to 392 -60 to 200 -- ELECTRICAL AS CURED Dielectric Strength (V/mil) 400 400 ASTM D149 Dielectric Constant (1000 Hz) 6.4 6.4 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 Continuous Use Temp (F) / (C) THERMAL AS CURED Thermal Conductivity (W/m-K) 1.8 1.8 ASTM D5470 SCHEDULE 1 60 min SCHEDULE 2 480 min (8 hr) - Cure @ 25C (4) 5 hours 3 days - Cure @ 100C (4) 10 min 30 min - CURE SCHEDULE Pot Life @ 25C (3) 1) Capillary viscosity, initial, 3000 sec-1. Part A and B measured separately 2) Thirty second delay value Shore 00 hardness scale. 3) Parallel Plate Rheometer - Working life as liquid. 4) Parallel Plate Rheometer - Estimated time to read 90% cure. Typical Applications Include: * Automotive electronics * Telecommunications * Computer and peripherals * Between any heat generating semiconductor and a heat sink Configurations Available: * Supplied in cartridge or kit form * With or without glass beads Building a Part Number - 10G - Standard Options NA Section E - 60 Section D 00 Section C - Section B GF1500 Section A Gap Filler 1500 is a two-part, high performance, thermally conductive liquid gap filling material, which features superior slump resistance and high shear thinning characteristics for optimized consistency and control during dispensing.The mixed system will cure at room temperature and can be accelerated with the addition of heat. Unlike cured thermal pad materials, a liquid approach offers infinite thickness variations with little or no stress to the sensitive components during assembly. Gap Filler 1500 exhibits low level natural tack characteristics and is intended for use in applications where a strong structural bond is not required.As cured, Gap Filler 1500 provides a soft, thermally conductive, form-inplace elastomer that is ideal for fragile assemblies and filling unique and intricate air voids and gaps. TEST METHOD Visual NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. Cartridges: 50cc = 50.0cc, 400cc = 400.0cc Kits: 1200cc = 1200.00cc, 10G = 10 gallon Pot Life: 60 = 60 min, 480 = 480 min 00 = No spacer beads, 07 = 0.007" spacer beads, 10 = 0.010" spacer beads GF1500 = Gap Filler 1500 (Two-Part) Material Note: To build a part number, visit our website at www.bergquistcompany.com. www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-4156 The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asian Headquarters Hong Kong Ph: 852-2690-9296 Fax: 852-2690-0782 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GF1500_0312 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: GF1500-00-60-50cc