CUSTOMER DRAWING Part Name Component Dimensions ST63-1-55-GA-CL Ident. Code ST631R ST63-2-55-GA-CL ST632R ST63-3-55-GA-CL ST633R ST63-4-55-GA-CL ST634R ST63-5-55-GA-CL ST635R L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) B min 1.9 (0.075) 2.65 (0.105) 4.3 (0.170) 5.95 (0.235) 7.0 (0.275) C min 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) Shall Accommodate Cable With Dimensions E F H max min max 2.65 0.90 1.9 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.145) (0.055) (0.105) 5.08 2.15 4.3 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.6 4.30 7.0 (0.300) (0.170) (0.275) D min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL0 per ANSI J-STD-004. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: RAYCHEM 55A0111 in accordance with MIL-W-22759/32. Stranded tin plated copper. Color: (see note). APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. Temperature range: -55C to +150C. 3. When installed in accordance with Raychem Process Standard RCPS-100-70 assemblies will meet performance requirements of Raychem Specification RT-1404. Complete part number is defined as shown: ST63-X 55 GA CL AWG Size Lead type Lead Lead color designation per MIL-STD-681. 1 to 5 M22759/32 20 22 Colors available: 24 26 20AWG-black, green, white For best results, prepare the cable as shown: 22AWG-black, green, white 24AWG-black, blue, white 26AWG-black, white All gauges: White with a single black stripe. TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks Raychem Devices UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DRAWN DATE: CAD FILE: R. MAPALO 08/12/1998 ST63-X-55-GA-CL (c) 2020 TE Connectivity Corporation. All rights reserved. CAGE CODE: 06090 If this document is printed it becomes uncontrolled. Check for the latest revision. TITLE: SOLDERSLEEVE* DEVICE TERMINATION WITH LEADS DOCUMENT NO.: ST63-X-55-GA-CL Revision: Issue Date: July 2020 F ECO: ECO-20-009992 SCALE: NONE SIZE: A SHEET: 1 of 1