9007 SERIES/SPARTAN SIP REED RELAYS 9007 Series Economy SIP Reed Relays The SIP relay is the industry choice for a wide variety of designs where economy, performance and a compact package are needed. The 9007 Spartan Series is a general purpose economy version of the 9001 for applications with less stringent requirements. These relays are well suited for applications in Security, Instrumentation and Modems. The specification tables allow you to select the appropriate relay for your application. 9007 Series Features u Hermetically sealed contacts for long life u High dielectric strength available, consult factory u High speed switching compared to electromechanical relays u Molded thermoset body on integral lead frame design u Optional Coil Suppression Diode - protects coil drive circuits u UL File #E67117, CSA File #028537 - Contact factory for details u RoHS compliant Model 9007 DIMENSIONS in Inches (Millimeters) .020 (0.51) Model 9007 Alternate Package .012 (0.30) LEAD DETAIL (TYP.) Ordering Information Part Number Model Number 9007 9007-XX-XX General Options 0=No Diode 1=Diode2 Coil Voltage 05=5 volts 12=12 volts 24 = 24 volts Magnetic Shield Option 0= No Shield 1= Shield (External) 4= High-Sensitivity Coil w/Mag. Shield (5V & 12V only) 5 =High-Sensitivity Coil w/o Mag. Shield (12V only) 34 | page tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters 90072 Test Conditions Units .2 -.2 -.2 COIL SPECS. Nom. Coil Voltage VDC 5 12 24 Max. Coil Voltage VDC 6.5 15.0 32.0 +/- 10%, 25 C 500 1000 2000 1000 2000 ---- Operate Voltage Must Operate by VDC - Max. 3.75 9.0 18.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 2.0 Switching Voltage Max DC/Peak AC Resist. Volts 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.0 Contact Rating Max DC/Peak AC Resist. Watts 10 Signal Level 1.0V, 10mA x 10 Ops. 100 Static Contact Resistance (max. init.) 50mV, 10mA 0.200 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec N/A Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25C, 40% RH 1010 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.7 - Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.4 - Contacts Open, Shield Floating pF - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 250 1500 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.50 msec. 0.20 Coil Resistance Coil Resistance (hi-sensitivity) CONTACT RATINGS Life Expectancy-Typical 1 6 RELAY SPECIFICATIONS Contact to Shield Release Time - Typical Top View: Grid = .1"x.1" (2.54mm x 2.54mm) 1 2 3 Notes: 1 2 Consult factory for life expectancy at other switching loads. Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed. 4 Environmental Ratings: Storage Temp: -35C to +100C; Operating Temp: -20C to +85C; Solder Temp: 270C max; 10 sec. max All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 G's to 2000 Hz; Shock: 50 G's For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 35