Features:
www.lineagepower.com/oem
Lineage Power Lineage Power Lineage Power (China)
3000 Skyline Dr. 2841 Dow Avenue 1353 Chenqiao Road, Shanghai Sengpu Industrial Park
Mesquite, TX 75149 Tustin, CA 92780 USA Shanghai, 201401 China
Phone: (972) 284-2000 Phone: (714) 544-6665 Phone: 021 6710 8910
CAR2512FP Series
2500 Watt +12V Front End Power Supply
rev 100506
∎ Leading Edge Power Density, 27W/in3 in 1U Form Factor
∎ Works in Parallel with DC Input Models (CAR2412DC)
∎ I2C Serial Bus and PMBus Interface
∎ Up to 91.5% Eciency (90% at 20% Load)
∎ Active Current Sharing (Single Wire)
∎ Remote On/O, Remote Sense, Voltage Program Circuits
∎ Microprocessor Based Design Allows for Automatic Fan Speed Control
∎ Front Panel AC Access via IEC-320 Inlet
KEY MARKET SEGMENTS & APPLICATIONS
∎ Distributed Power
∎ Storage Equipment
∎ Mid-High End Servers
∎ High-End Routers & Switchgear
SPECIFICATIONS 2500 Watt 12V Front End Power Supply
Input Voltage Range 180-264 VAC, 47-63 Hz, derate for 140-180 VAC Operation
Input Current Maximum 16A @ 180VAC, Full Load (max)
Inrush Current 40A max. cold start (per ETS 300 132-1 and Bellcore specications)
Input Protection One fuse (line) - 20A & 250Vac Type 3AB Axial
Power Factor 0.99 typical complies with IEC555, EN60555-2, EN61000-3-2
Eciency Up to 91.5% (90% e. @ 20% load, 91.5% e @ 30% load, 90.5% e @ 50%, 88% @ 100% Load), Operating under 12V
output @ 230 VAC (including ORing MOSFETS)
Output Power 2500W at High Line Operation (180-264 VAC)
Output Voltage Range 10.8V to 13.2Vdc via analog and I2C / PMBus
Output Current 208 Amps @ 12 VDC
Standby Bias Voltage 3.3VSB @ 1A, reference to Vout Return (optional 5VSB)
Voltage Regulation ±2% of Vnom for any combination of line, load and temperature
Ouput Ripple & Noise ±1% (pk-pk) @ 20MHz with 0.1μF ceramic and 10μF electrolytic caps at the output
Transient Response 5% max deviation, recovery time 300μs @ 50% load step and di/dt < 1A/μs
Switching Frequency 400khz typical or optimized for eciency gains
Hold-Up Time 12ms at full load measured down to 10.8V (with 230Vac). An early warning signal is provided 2ms prior to loss of output
power. Ride thru is 8.3ms typically
Remote On/O TTL Compatible input, ON if >3V or open, OFF if <1V”
Current Limit Protection 110-130% of Iout nominal
Short Circuit Protection Self protected with auto recovery
Over Voltage Protection Trip level: ≥14.8Vdc ± 1V, Reset condition by recycling the input or applying Remote On/O
Operating Temperature -10°C to +70°C
Over Temperature Protection Non latching; protection active at 110°C internal temperature, restart at 95°C (typical)
EMI FCC-B & EN55022-B with specied lter or at rack-level, GR-1089-CORE
LED Indicators Two LED’s, 1st Led (Green = AC OK), 2nd LED (Green = DC OK / Red = Fault)
Analog Status & Control Voltage Programming (V Prog), Load sharing (I Share), Remote ON/OFF, Current Monitor (I Monitor), Over temperature
(Temp Warning), Fault, PS Present, Module Enable, AC OK, DC OK
Digital Status & Control I2C and PMBus
Shock & Vibration Telcordia NEBS GR-63-CORE Level III
Dimensions 14.88” x 4.00” x 1.65” / 378mm x 102mm x 41.9mm
Weight 4.73lbs / 2.15kg
Safety Approvals IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV
Options 5VSB Output
FEATURES BENEFITS
High Power Density 27W/in3More system space for application circuits and hardware
Load Sharing & Fault Tolerant Excellent reliability in N+1 operation with AC or DC Input Versions
Automatic Fan Speed Control Reduces audible noise and increases reliability
High Eciency under light Loads Supports Demands for Latest Server Farm Trends