4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040MGS Mega Green Features Description z Single color. The Mega Green source color devices are made with Al- z Suitable for all SMT assembly and solder process. GaInP on GaAs substrate Light Emitting Diode. z Available on tape and reel. z Ideal for backlighting. z Package : 500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 1 OF 6 ERP: 1201006660 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 2 OF 6 ERP: 1201006660 Selection Guide Part No. Dice AA4040MGS Lens Type Mega Green (AlGaInP) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 55 120 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Mega Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Mega Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 3 OF 6 ERP: 1201006660 Mega Green AA4040MGS SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 4 OF 6 ERP: 1201006660 AA4040MGS Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 5 OF 6 ERP: 1201006660 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAL0878 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu AA4040MGS DATE: SEP/01/2010 DRAWN: Y.H.Wu PAGE: 6 OF 6 ERP: 1201006660