CPH3442 Ordering number : ENA0094 N-Channel Silicon MOSFET CPH3442 General-Purpose Switching Device Applications Features * * * Low ON-resistance. Ultrahigh-speed switching. 2.5V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 30 Gate-to-Source Voltage VGSS 10 V ID 6.5 A Drain Current (DC) Drain Current (Pulse) IDP PD Allowable Power Dissipation V PW10s, duty cycle1% 26 A Mounted on a ceramic board (900mm20.8mm) 1.2 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS VGS=8V, VDS=0V VDS=10V, ID=1mA VDS=10V, ID=3A RDS(on)1 RDS(on)2 ID=3A, VGS=4V ID=1.5A, VGS=2.5V Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) tr Turn-OFF Delay Time Fall Time ID=1mA, VGS=0V VDS=30V, VGS=0V VGS(off) yfs Input Capacitance Rise Time Conditions td(off) tf Ratings min typ Unit max 30 V 1 10 0.4 6 VDS=10V, f=1MHz VDS=10V, f=1MHz 1.4 10 A A V S 17 24 m 22 31 m 1295 pF 239 pF VDS=10V, f=1MHz See specified Test Circuit. 183 pF 21 ns See specified Test Circuit. 85 ns See specified Test Circuit. 156 ns See specified Test Circuit. 125 ns Marking : ZR Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92005PE MS IM TB-00001598 No. A0094-1/4 CPH3442 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Total Gate Charge Qg VDS=10V, VGS=4V, ID=6.5A 16.1 nC Gate-to-Source Charge Qgs VDS=10V, VGS=4V, ID=6.5A 2.8 nC Gate-to-Drain "Miller" Charge Qgd VDS=10V, VGS=4V, ID=6.5A Diode Forward Voltage VSD IS=6.5A, VGS=0V Package Dimensions unit : mm 7015-004 5.7 0.15 0.4 ID=3A RL=5 VIN 0.6 0.2 D 1.6 2.8 0.05 VOUT PW=10s D.C.1% 0.6 G 2 1.9 CPH3442 2.9 P.G 0.7 0.9 0.2 1 : Gate 2 : Source 3 : Drain 2.5V 2.0V 9 8 4.5 4.0V 4.0 3.5 3.0 2.5 2.0 1.5 7 6 5 4 3 Ta= 7 2 1.0 25 1 0.5 C --25C 3.0V 5.0 =1.5V VGS VDS=10V 5C 5.5 S ID -- VGS 10 Drain Current, ID -- A 8.0V 6.0V 6.0 50 SANYO : CPH3 ID -- VDS 6.5 Drain Current, ID -- A V VDD=15V 4V 0V 3 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Drain-to-Source Voltage, VDS -- V 0 0.7 Static Drain-to-Source On-State Resistance, RDS(on) -- m 3.0A 35 30 25 20 15 10 5 0 2 4 6 Gate-to-Source Voltage, VGS -- V 0.6 8 IT10182 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IT10181 RDS(on) -- Ta 45 45 40 0.4 Gate-to-Source Voltage, VGS -- V Ta=25C ID=1.5A 0.2 IT10180 RDS(on) -- VGS 50 Static Drain-to-Source On-State Resistance, RDS(on) -- m 1.2 Switching Time Test Circuit VIN 1 nC 0.82 40 35 30 5V 2. S= 25 VG A, 5 1. I D= 4.0V S= , VG 3.0A I D= 20 15 10 5 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- C 120 140 160 IT10256 No. A0094-2/4 CPH3442 5 25 C 3 = Ta 2 -- C 75 1.0 C 25 7 5 3 1.0 7 5 3 2 0.1 7 5 3 2 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 0.01 0.2 5 7 10 IT10184 Drain Current, ID -- A Ciss, Coss, Crss -- pF tf 100 7 tr 5 3 td(on) 0.8 1.0 1.2 IT10185 f=1MHz 3 td(off) 2 0.6 Ciss, Coss, Crss -- VDS 5 VDD=15V VGS=4V 3 0.4 Diode Forward Voltage, VSD -- V SW Time -- ID 5 Switching Time, SW Time -- ns 3 2 C 7 VGS=0V Ta= 75C 25C 10 Source Current, IS -- A Forward Transfer Admittance, yfs -- S 2 IS -- VSD 10 7 5 VDS=10V --25 yfs -- ID 3 2 Ciss 1000 7 5 3 Coss 2 2 Crss 100 10 0.1 2 3 5 7 2 1.0 3 5 7 Drain Current, ID -- A 3 2 3.0 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 5 VDS=10V ID=6.5A 3.5 2.5 2.0 1.5 1.0 10 7 5 0 2 4 6 8 10 12 14 16 Total Gate Charge, Qg -- nC 18 IT10310 PD -- Ta 1.4 10 15 20 25 30 IT10309 ASO <10s IDP=26A 1m s ID=6.5A DC 1.0 7 5 0 s ms 0m s op er 3 2 10 10 10 3 2 Operation in this area is limited by RDS(on). ati on 0.1 7 5 3 2 0.5 0 5 Drain-to-Source Voltage, VDS -- V VGS -- Qg 4.0 Allowable Power Dissipation, PD -- W 0 10 IT10308 Ta=25C Single pulse Mounted on a ceramic board (900mm20.8mm) 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 5 IT10189 1.2 M ou 1.0 nt ed on 0.8 ac er am ic 0.6 bo ar d (9 00 m 0.4 m2 0. 8m 0.2 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT10146 No. A0094-3/4 CPH3442 Note on usage : Since the CPH3442 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2005. Specifications and information herein are subject to change without notice. PS No. A0094-4/4