MITSUBISHI INTELLIGENT POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE PM20CTM060-3 600V, 20A Current-sense 6kHz IGBT type inverter Built in IGBT gate drive circuit Built in Faule OC, SC, OT & UV protection Fault output 1.5kW class inverter application UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICATION Air conditioner, mortor control OUTLINE DRAWING Dimensions in mm A * B: TERMINAL NAME 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. B 94.51 76 3.56 x 17 = 60.52 0.8 (11.99) 3.56 0.3 10 11 12 13 14 15 2 - 0.8 640.8 16 2 - 4.5 P (14.25) VN1 UN VN WN FO P N U V W 17 18 19 20 N U V W 14 0.3 8.3 4.5 8.3 7 8 9 29.6 0.8 4 5 6 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 7.12 19 1 2 3 7.12 40 1 7.12 VUPC UP VUP1 VVPC VP VVP1 VWPC WP VWP1 VNC 2 - R5 56 0.8 3.5 0.5 84.5 0.5 6.35 1.65 0.8 0.1 7.95 19.4 1 LABEL 16 1 B 8 0.5 3.5 A (1) 8 Tab #250. t = 0.8 (t = 0.4) (t = 0.8) A: DETAIL B: DETAIL Aug.1999 http://store.iiic.cc/ MITSUBISHI INTELLIGNET POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE EQUIVALENT CIRCUIT DIAGRAM VNC 10 VN1 11 FO 15 WN 14 VN 13 UN 12 GND VCC FO WN VN UN VWPC WP VWP1 VVPC 7 8 9 4 Tc VP 5 VVP1 VUPC 6 1 UP 2 VUP1 3 GND In VCC GND In VCC GND In VCC GND GND GND Tb SWN OWN SVN OVN SUN OUN 17 N GND 20 W Out 19 V Out 18 U Out 16 P MAXIMUM RATINGS (Tj = 25C, unless otherwise noted) INVERTER PART Symbol VCES IC ICP PC Tj Parameter Collector-emitter voltage Collector current Collector current (peak) Collector dissipation Junction temperature Conditions VD = 15V, ICIN = 10mA TC = 25C TC = 25C TC = 25C Ratings 600 20 40 56 -20 ~ +125* Unit V A A W C Ratings Unit 20 V 20 mA 20 20 V mA * maximum instantaneous Tj 150C CONTROL PART Symbol Parameter VD Supply voltage ICIN Input current VFO IFO Fault output supply voltage Fault output current Conditions Applied between : VUP1-VUPC , VVP1-VVPC VWP1-VWPC, VN1-VNC Applied between : UP-VUPC, VP-VVPC, WP-VWPC, UN * VN * WN-VNC Applied between : FO -VNC Sink current of FO terminal Aug.1999 http://store.iiic.cc/ MITSUBISHI INTELLIGNET POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE TOTAL SYSTEM Symbol Parameter Supply voltage protected VCC(PROT) by OC & SC VCC Supply voltage VCC(surge) Supply voltage (surge) TC Module case operating temperature T stg Storage temperature Viso Isolation voltage Conditions VD = 13.5 ~ 16.5V, Inverter part, Tj = 125C start Applied between : P-N, operating time Applied between : P-N, surge and non-operating time (Note 1) 60Hz, sinusoidal, AC * 1 min Ratings Unit 400 V 450 500 -20 ~ +100 -40 ~ +125 2500 V V C C Vrms Note 1 : T C measuring point is as shown below. Tc ELECTRICAL CHARACTERISTICS INVERTER PART Symbol VCE(sat) VEC ton trr tc(on) toff tc(off) ICES (Tj = 25C, unless otherwise noted) Parameter Test conditions Collector-emitter saturation voltage FWDi forward voltage I C = 20A, Tj = 25C I C = 20A, Tj = 125C -IC = 20A, VD = 15V, I CIN = 0mA Switching time VD = 15V, ICIN = 0mA10mA VCC = 300V, IC = 20A Tj = 125C (Per 1 arm) Inductive Load Collector-emitter cutoff current VCE = VCES, ICIN = 0mA VD = 15V, ICIN = 10mA Tj = 25C Tj = 125C Min. -- -- -- 0.5 -- -- -- -- -- -- Limits Typ. 1.8 2.0 2.0 2.5 0.1 0.2 2.5 0.9 -- -- Max. 2.6 3.0 3.0 3.5 -- 0.8 3.5 2.0 1 10 Min. -- -- 1 1 28 -- -- 100 -- 11.5 -- -- -- Limits Typ. 25 5 3 3 34 51 10 110 90 12.0 12.5 -- 10 Max. 35 10 5 5 -- -- -- 120 -- 12.5 -- 0.01 15 1.0 1.8 Unit V V s s s s s mA CONTROL PART Symbol Parameter Test conditions Circuit current Ith(ON) Ith(OFF) OC SC toff(OC) OT OTr UV UVr IFO(H) IFO(L) Input on threshold current Input off threshold current Over current trip level Short circuit trip level Over current delay time tFO Over temperature protection Supply circuit under voltage protection Fault output current VN1 -VNC VXP1-VXPC Applied between : UP-VUPC, VP -VVPC, WP-VWPC UN * V N * WN -VNC -20C Tj 125C, VD = 15V (only N side) -20C Tj 125C, VD = 15V (only N side) VD = 15V Base-plate Trip level Temperature detection, VD = 15V Reset level Trip level -20C Tj 125C (only N side) Reset level VD = 15V, ICIN = 0mA ID (Note 2) VD = 15V, VFO = 15V Minimum fault output pulse width (Note 2) VD = 15V -- Unit mA mA mA A A s C C V V mA mA ms Note 2 : Fault output is given only when the internal OC, SC, OT & UV protection. (only N side) Fault output of OC, SC protection given pulse. Fault output of OT, UV protection given pulse while over level. (OT is only N side) Aug.1999 http://store.iiic.cc/ MITSUBISHI INTELLIGNET POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE THERMAL RESISTANCES Parameter Symbol Rth(j-c)Q Rth(j-c)F Rth(c-f) Junction to case thermal resistances Contact thermal resistance Test conditions Inverter IGBT part, per 1/6 module Inverter FWDi part, per 1/6 module Case to fin, thermal grease applied, per 1/6 module Min. -- -- -- Limits Tye. -- -- -- Max. 2.0 4.5 0.4 C / W C / W C / W Min. 0.98 10 -- Limits Tye. 1.18 12 60 Max. 1.47 15 -- N*m kg*cm g Unit MECHANICAL RATINGS AND CHARACTERISTICS Symbol Parameter -- Mounting torque -- Weight Test conditions Mounting screw : M4 Unit RECOMMENDED CONDITIONS FOR USE Symbol VCC Parameter Supply voltage VD ICIN(ON) ICIN(OFF) fPWM tdead Input on current Input off current PWM input frequency Arm shoot-through blocking time Test conditions Applied between : P-N Applied between : VUP1-VUPC, VVP1-VVPC VWP1-VWPC, VN1-V NC Ratings (Note 3) Applied between : UP, VP, WP, UN, VN, WN Using application circuit Opto-coupler's input signal Using application circuit Opto-coupler's input signal 400 Unit V 15 1.5 V 5 1 8 3 mA mA kHz s Note 3 : Permissible ripple value : dv/dt 5V/s, Vripple 2V P-P Aug.1999 http://store.iiic.cc/ MITSUBISHI INTELLIGNET POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE PERFORMANCE CURVES COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 20 10 0 1 2 3 4 VD = 15V ICIN = 10mA 2.0 1.5 1.0 0.5 Tj = 25C Tj = 125C 0 5 10 0 20 40 30 COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE (TYPICAL) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) 2.2 101 1.8 7 5 4 3 SWITCHING TIMES (s) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) IC (A) VD = 17V 15V 13V 30 2.5 IC = 20A ICIN = 10mA 1.4 1.0 Tj = 25C Tj = 125C 0.6 0.2 12 13 14 15 16 tc(on) 2 3 4 5 7 101 2 3 4 5 7 102 COLLECTOR CURRENT IC (A) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS OF FREE-WHEEL DIODE (TYPICAL) 102 100 Tj = 125C 7 7 VCC = 300V 5 5 D = 15V V 4 4 INDUCTIVE LOAD 3 3 VD = 15V ICIN = 0mA Tj = 125C 101 7 5 4 3 Tj = 25C 2 0 7 5 Tj = 125C 4 VCC = 300V 3 VD = 15V SUPPLY VOLTAGE VD (V) 2 100 ton tc(off) 100 10-1 0 10 102 7 5 4 3 toff 2 2 INDUCTIVE LOAD 17 50 0.5 1.0 1.5 2.0 2.5 EMITTER-COLLECTOR VOLTAGE VEC (V) 2 Irr 10-1 trr 7 5 4 3 101 7 5 4 3 2 2 10-2 0 10 2 2 3 4 5 7 101 100 2 3 4 5 7 102 COLLECTOR REVERSE CURRENT REVERSE RECOVERY CURRENT Irr (A) 40 0 COLLECTOR REVERSE CURRENT Tj = 25C ICIN = 10mA REVERSE RECOVERY TIME trr (s) COLLECTOR CURRENT IC (A) 50 COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) OUTPUT CHARACTERISTICS (TYPICAL) IC (A) Aug.1999 http://store.iiic.cc/ MITSUBISHI INTELLIGNET POWER MODULES PM20CTM060-3 FLAT-BASE TYPE INSULATED PACKAGE TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi per 1 element) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT per 1 element) 101 7 Single Pulse 5 3 Rth(j - c)Q = 2.0C/ W 2 NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j - c) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j - c) 101 100 7 5 3 2 10-1 7 5 3 2 10-2 7 5 3 2 10-3 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7100 2 3 5 7101 TIME (s) 7 Single Pulse 5 3 Rth(j - c)F = 4.5C/ W 2 100 7 5 3 2 10-1 7 5 3 2 10-2 7 5 3 2 10-3 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7100 2 3 5 7101 TIME (s) Aug.1999 http://store.iiic.cc/