T4-LDS-0245, Rev. 1 (120179) ©2012 Microsemi Corporation Page 1 of 5
1N4614UR-1 thru 1N4627UR-1e3,
1N4099UR-1 thru 1N4135UR-1e3
Available on
commercial
versions
METALL URGICALLY BO NDED GLASS
SURFACE MOUNT 0.5 WATT ZENERS
Qualified per MIL-PRF-19500/435
Quali f i ed Levels:
JAN, JAN TX,
JANTX V a n d JANS
DESCRIPTION
The 1N4099UR-1 thru 1N 4 13 5U R -1 an d 1N 4 614UR -1 t hr u 1N46 27U R -1 ser ies of 0.5 watt
glass surface moun t D O-213AA Zener voltage regulat or s pr ovides a selection from 1.8 to 100
vol ts in standard 5% t ol er anc e. 1% and 2% t ol er anc e versi ons ar e also available (see part
nomenclature). These also h ave an internal met al lur gical bond.
This type of internally bonded
Zener package con str uction i s also mi litar y qu alified up to a JANS level for hig her reliability
applications. Mic r osemi also offers numerous oth er Zener products to meet higher and lower
power applications.
DO-213AA
Package
Also available in:
DO-35 package
(axial-leaded)
1N4099 – 1N4135 and
1N4614 – 1N4627
DO-216 package
(tabbed sur face mount)
1PMT4100 – 1PMT4135 an d
1PMT4621 – 1PMT4627
Important: For the latest information, visit our web site http://www.microsemi.com.
FEATURES
• Surface mount equivalent to JEDEC registered 1N4099 thru 1N4135 and 1N4614 thru 1N4627
series.
• I nter nal meta llurgi cal bond.
• JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435.
• RoHS compliant versions available (commercial grade only).
APPLICAT IONS / BENE FITS
• Regulates voltage over a broad operating current and temperature range.
• Extensive selection from 1.8 to 100 volts.
• Standard voltage tolerance is plus or minu s 5% with tighter tolerances available at p lus or mi nus
2% or 1%.
• Herm etically sealed surface mount package.
• Non-sensitive to ESD per MIL-STD-750 method 1020.
• Minimal capacitance (see Figure 3).
• Inherently radiation hard as described in Microsemi MicroNote 050.
MAXI MUM RATINGS @ TC = +25 ºC unless otherwise specified
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: + 353 (0) 65 6822298
Website:
www.microsemi.com
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-65 to +175
oC
Thermal Resistance Junction-to-Ambient (1)
RӨJA
300
oC/W
Thermal Resistance Junction-to-End Cap
RӨJEC
100
oC/W
Steady-State Power Dissipation (2)
PD
0.5
W
Forward Voltage @ 200 mA
VF
1.1
V
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. When mounted on F R4 PC board (1 oz Cu ) with recommended footprint (see last page).
2. At end cap temperature TEC < 125 oC or at ambient TA < 50 ºC when mounted on FR4 PC board as
described for thermal resistance above ( see F igure 2 for derating).
T4-LDS-0245, Rev. 1 (120179) ©2012 Microsemi Corporation Page 2 of 5
1N4614UR-1 thru 1N4627UR-1e3,
1N4099UR-1 thru 1N4135UR-1e3
M ECHANICAL and PACK AGING
• CASE: Hermetically sealed glass DO-213AA (SOD80 or CDLL34) MELF style package.
• TERMINALS: End caps tin-lead (Sn/Pb) or RoHS co mp lia nt annea led matte-tin (on commercial grade onl y) plating solderable per
MIL-STD-750, method 2026.
• POLARITY: Cathode i ndicated by banded end. Diode is to be operated with the banded end pos itive with respect to the opposite
end for Zener regulation.
• MARKING: Cathode band only.
• TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: 0.04 grams.
• See Package Dimensions on last page.
PART NOME NCL ATURE
JAN 1N4099 C UR -1 (e3)
Reliability Level
JAN = JAN lev el
JANTX = JANTX level
JANTXV = JANTXV level
JANS = JANS level
Blank = Commercial
JEDEC type number
(See Electrical Characteristics
table)
Zener V oltage Toler anc e
Blank = 5%
C = 2%
D = 1%
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Metallurgically Bonded
Surface Mount Package
SYMBOL S & DEFI NITIONS
Symbol
Definition
IR
Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
IZ, IZT, IZK
Regulator Current: The dc regulator current (IZ), at a specified test point (I ZT), near breakdown knee (I ZK ).
IZM
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
ND
Noise Density: The nois e generated over a specified frequency bandwidth usually specified in terms of mV/ √Hz.
VR
Reverse Voltage: The reverse voltage dc value, no al ternating component.
VZ
Zener Voltage: The Zener voltage the device will exhibit at a specified current (IZ) in i ts breakdown region.
ZZT or ZZK
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
specified rms current modulation (typically 10% of IZT or IZK) and superimposed on IZT o r I ZK respectively.
T4-LDS-0245, Rev. 1 (120179) ©2012 Microsemi Corporation Page 3 of 5
1N4614UR-1 thru 1N4627UR-1e3,
1N4099UR-1 thru 1N4135UR-1e3
ELECTRICAL CHARACTERISTICS
@ 25 °C unless otherwis e stated
INDUSTRY
PAR T NUMBER
(Note 1)
MICROSEMI
PAR T NUMBER
(Note 1)
NOMINAL
ZENER
VOLTAGE
VZ @ I ZT
(Note 2)
ZENER
TEST
CURRENT
IZT
MAXIMUM
ZENER
IMPEDANCE
ZZT
(N ote 3)
MAXIMUM
REVERSE
CURRENT
IR @ VR
MAXIMUM
NOISE
DENSITY
ND @ I ZT
MAXIMUM
ZENER
CURRENT
IZM
TYPICAL
TEMP.COEFF.
OF ZENER
VOLTAGE
αVZ
Volts
µA
Ohms
µA
Volts
µV/√Hz
mA
%/oC
1N4614UR-1
1N4615UR-1
1N4616UR-1
CDLL4614-1
CDLL4615-1
CDLL4616-1
1.8
2.0
2.2
250
250
250
1200
1250
1300
3.5
2.5
2.0
1
1
1
1
1
1
120
110
100
-0.075
-0.075
-0.075
1N4617UR-1
1N4618UR-1
1N4619UR-1
1N4620UR-1
CDLL4617-1
CDLL4618-1
CDLL4619-1
CDLL4620-1
2.4
2.7
3.0
3.3
250
250
250
250
1400
1500
1600
1650
1.0
0.5
0.4
3.5
1
1
1
1
1
1
1
1
95
90
87
85
-0.075
-0.075
-0.075
-0.075
1N4621UR-1
1N4622UR-1
1N4623UR-1
1N4624UR-1
CDLL4621-1
CDLL4622-1
CDLL4623-1
CDLL4624-1
3.6
3.9
4.3
4.7
250
250
250
250
1700
1650
1600
1550
3.5
2.5
2.0
5.0
2
2
2
3
1
1
1
1
83
80
77
75
-0.065
-0.060
-0.050
-0.040,+0.020
1N4625UR-1
1N4626UR-1
1N4627UR-1
1N4099UR-1
CDLL4625-1
CDLL4626-1
CDLL4627-1
CDLL4099-1
5.1
5.6
6.2
6.8
250
250
250
250
1500
1400
1200
200
5.0
5.0
5.0
1.0
3
4
5
5.17
2
4
5
40
70
65
61
56
-0.045,+0.030
-0.020,+0.040
-0.010,+0.050
0.040
1N4100UR-1
1N4101UR-1
1N4102UR-1
1N4103UR-1
CDLL4100-1
CDLL4101-1
CDLL4102-1
CDLL4103-1
7.5
8.2
8.7
9.1
250
250
250
250
200
200
200
200
1.0
0.5
0.5
0.5
5.70
6.24
6.61
6.92
40
40
40
40
51
46
44
42
0.045
0.048
0.049
0.050
1N4104UR-1
1N4105UR-1
1N4106UR-1
1N4107UR-1
CDLL4104-1
CDLL4105-1
CDLL4106-1
CDLL4107-1
10
11
12
13
250
250
250
250
200
200
200
200
0.5
0.05
0.05
0.05
7.60
8.44
9.12
9.87
40
40
40
40
38
35
32
29
0.055
0.060
0.065
0.065
1N4108UR-1
1N4109UR-1
1N4110UR-1
1N4111UR-1
CDLL4108-1
CDLL4109-1
CDLL4110-1
CDLL4111-1
14
15
16
17
250
250
250
250
200
100
100
100
0.05
0.05
0.05
0.05
10.65
11.40
12.15
12.92
40
40
40
40
27
25
24
22
0.070
0.070
0.070
0.075
1N4112UR-1
1N4113UR-1
1N4114UR-1
1N4115UR-1
CDLL4112-1
CDLL4113-1
CDLL4114-1
CDLL4115-1
18
19
20
22
250
250
250
250
100
150
150
150
0.05
0.05
0.01
0.01
13.67
14.44
15.20
16.72
40
40
40
40
21
20
19
17
0.075
0.075
0.075
0.080
1N4116UR-1
1N4117UR-1
1N4118UR-1
1N4119UR-1
CDLL4116-1
CDLL4117-1
CDLL4118-1
CDLL4119-1
24
25
27
28
250
250
250
250
150
150
150
200
0.01
0.01
0.01
0.01
18.25
19.00
20.45
21.28
40
40
40
40
16
15
14
14
0.080
0.080
0.085
0.085
1N4120UR-1
1N4121UR-1
1N4122UR-1
1N4123UR-1
CDLL4120-1
CDLL4121-1
CDLL4122-1
CDLL4123-1
30
33
36
39
250
250
250
250
200
200
200
200
0.01
0.01
0.01
0.01
22.80
25.08
27.38
29.65
40
40
40
40
13
12
11
9.8
0.085
0.085
0.090
0.090
1N4124UR-1
1N4125UR-1
1N4126UR-1
1N4127UR-1
CDLL4124-1
CDLL4125-1
CDLL4126-1
CDLL4127-1
43
47
51
56
250
250
250
250
250
250
300
300
0.01
0.01
0.01
0.01
32.65
35.75
38.76
42.60
40
40
40
40
8.9
8.1
7.5
6.7
0.090
0.090
0.090
0.090
1N4128UR-1
1N4129UR-1
1N4130UR-1
1N4131UR-1
CDLL4128-1
CDLL4129-1
CDLL4130-1
CDLL4131-1
60
62
68
75
250
250
250
250
400
500
700
700
0.01
0.01
0.01
0.01
45.60
47.10
51.68
57.00
40
40
40
40
6.4
6.1
5.6
5.1
0.090
0.090
0.095
0.095
1N4132UR-1
1N4133UR-1
1N4134UR-1
1N4135UR-1
CDLL4132-1
CDLL4133-1
CDLL4134-1
CDLL4135-1
82
87
91
100
250
250
250
250
800
1000
1200
1500
0.01
0.01
0.01
0.01
62.32
66.12
69.16
76.00
40
40
40
40
4.6
4.4
4.2
3.8
0.095
0.095
0.095
0.095
SEE NOTES ON NEXT PAGE.
T4-LDS-0245, Rev. 1 (120179) ©2012 Microsemi Corporation Page 4 of 5
1N4614UR-1 thru 1N4627UR-1e3,
1N4099UR-1 thru 1N4135UR-1e3
NOTE 1: These may be ordered as either 1N4614UR-1 thru 1N4627UR-1 and 1N4099UR-1 thru 1N4135UR-1 or CDLL4614-1 thru CDLL4627-1 and
CDLL4099-1 thru CDLL4135-1. For military types, add the JAN, JANTX, JANTXV prefix for required screening to the industr y part number.
NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% on the nominal Zener voltage. Tighter tolerances are also
available with C or D suffix for 2% or 1% to l era nce resp ec tiv el y, e.g. 1N41 05C UR-1 for 2%. VZ is measured with the diode in
thermal equilibrium (still air) at 25 oC for end-cap terminations.
NOTE 3: Zener impedance is derived by superimposing on IZT a 60 Hz rms ac curren t at 10% of IZT . See MicroNote 202 for ZZT variation wit h I Z.
GRAPHS
FIGURE 1 – Noise Density Measurem en t Circuit
Noise density, (ND) is specified in microvolt-rms per square-root-hertz.
Actual measurement is performed using a 1 KHz to 3 KHz frequency
bandpass filter at a constant Z ener test current (IZT ) at 25 oC ambient
temperature. ND is calculated fr om the formula.
Zener Voltage VZ
FIGURE 3 – Capacit anc e vs . Zener Volt age (Typical )
TEC, End Cap Temperature (oC) or TA
Ambient Temperature on FR4 PC board
FIGURE 2 – Power Der ating Curve
P
d
Rated Power Dissipation (mW)
Typical Capacitance in Picofarads (pF)
T4-LDS-0245, Rev. 1 (120179) ©2012 Microsemi Corporation Page 5 of 5
1N4614UR-1 thru 1N4627UR-1e3,
1N4099UR-1 thru 1N4135UR-1e3
PACKAGE DIM ENSIONS
PAD LAYOUT
DIM
INCH
MILLIMETERS
MIN
MAX
MIN
MAX
BD
0.063
0.067
1.60
1.70
BL
0.130
0.146
3.30
3.71
ECT
0.016
0.022
0.41
0.56
S
.001 mi n
0.03 mi n
INCH
mm
A
.200
5.08
B
.055
1.40
C
.080
2.03
