R Specification Control Drawing Identification, colors & marks EPD-RWC-23377 4 conductor cable Issue A - 5/21/2014 Cross section A 9 A 5 A 0 A 2 Components ID Quantity Part number Description A 4 55A0114-26 Primary wire Cable Outer Description Thickness Inches mm Core Shield Jacket Round silver copper 38 awg regular Thermorad HTF black 0.009 0.021 0.22 0.53 Cable OD tolerance Specification Raychem WCD 51/367 Weight 15.66 lb/kft OD Inches 0.077 0.094 0.136 mm 1.96 2.39 3.46 + 0.018 + 0.46 23.35 Kg/Km (c) 2014 TE Connectivity Ltd. All rights reserved. Page 1 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95 R Specification Control Drawing EPD-RWC-23377 4 conductor cable Issue A - 5/21/2014 Continued Physical properties Component Sequence The placing of the components in the cross sectional view of the cable is for reference only and is not a requirement Notes Colors Dimensions Export License Note Identification, Colors & Marks Minimum length Part Number Note Specification Information Trademarks Jacket identification Color code designators shall be in accordance with MIL-STD-681. Dimensions are in inches, and unless otherwise designated, are nominal. The information contained on this drawing may be subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR) controls and may not be disclosed to any foreign person or firm, including foreign persons employed by or associated with your firm, without first complying with all requirements for obtaining an export license if applicable. The following is the key to the descriptions in the left hand view of the cable on Page 1. Line 1: Identifies the component per the components' ID list. Line 2: Color codes. Line 3: Mark on component "-" mark on component jacket. Cable will be supplied in 50 ft. minimum lengths unless otherwise specified. Other codes and suffixes may be added to the Part Number as necessary, to capture any additional requirements imposed by the purchase order This drawing is the property of Tyco Electronics Corporation and may not be used for any purpose other than for that which it is supplied without the express written authority of Tyco Electronics Corporation. Raychem, Thermorad , TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Mark: KULITE. Page 2 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95