http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.7.7
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM03PG Series (0201 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 15000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM03PG220SN1p22ohm ±25% - 900mA 0.065ohm max. -55 to +125°C
BLM03PG330SN1p33ohm ±25% - 750mA 0.090ohm max. -55 to +125°C
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
40
60
20
80
BLM03PG330SN1
BLM03PG220SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
40
60
20
80
Number of Circuits: 1
■ Impedance-Frequency Characteristics (Main Items) ■ Impedance-Frequency Characteristics
BLM03PG220SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.7.7
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
40
60
20
80
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM03PG330SN1
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
EMIFILr (Inductor type) Chip Ferrite Bead
BLM03PX Series (0201 Size)
c Dimensions
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
c Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 15000
J330mm Paper Tape 50000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM03PX220SN1p22ohm ±25% - 1800mA 0.040ohm max. -55 to +125°C
BLM03PX330SN1p33ohm ±25% - 1500mA 0.055ohm max. -55 to +125°C
BLM03PX800SN1p80ohm ±25% - 1000mA 0.130ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Derating of Rated Current
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM03PX_SN1 series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (A)
850 125 145
0.60
2.00
1.80
1.50
1.45
1.20
1.00
0.80
BLM03PX220SN1
BLM03PX330SN1
BLM03PX800SN1
c Impedance-Frequency Characteristics (Main Items)
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
40
80
120
160
BLM03PX800SN1
BLM03PX220SN1
BLM03PX330SN1
c Impedance-Frequency Characteristics
BLM03PX220SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
10
20
30
40
Continued on the following page.
3
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
3
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency Characteristics
BLM03PX330SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
15
30
45
60
c Impedance-Frequency Characteristics
BLM03PX800SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
40
80
120
160
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
EMIFILr (Inductor type) Chip Ferrite Bead
BLM15PG/BLM15PD Series (0402 Size)
c Dimensions
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
c Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 10000
J330mm Paper Tape 50000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM15PG100SN1p10ohm (Typ.) - 1000mA 0.05ohm max. -55 to +125°C
BLM15PD300SN1p30ohm ±25% - 2200mA 0.035ohm max. -55 to +125°C
BLM15PD600SN1p60ohm ±25% - 1700mA 0.06ohm max. -55 to +125°C
BLM15PD800SN1p80ohm ±25% - 1500mA 0.07ohm max. -55 to +125°C
BLM15PD121SN1p120ohm ±25% - 1300mA 0.09ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Derating of Rated Current
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM15PD series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating of Rated Current
Rated Current (mA)
Operating Temperature (°C)
125850
1300
1700
2200
1400
1100
900
2000
1500
1000
0
c Impedance-Frequency Characteristics (Main Items)
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
50
100
150
200
250
BLM15PG100SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
BLM15PD300SN1
c Impedance-Frequency Characteristics
BLM15PG100SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
5
10
15
20
Z
R
X
c Impedance-Frequency Characteristics
BLM15PD300SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
15
30
45
60
Z
R
X
c Impedance-Frequency Characteristics
BLM15PD600SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
30
60
90
120
Z
R
X
Continued on the following page.
3
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
3
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency Characteristics
BLM15PD800SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
40
80
120
160
Z
R
X
c Impedance-Frequency Characteristics
BLM15PD121SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
60
120
180
240
Z
R
X
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
EMIFILr (Inductor type) Chip Ferrite Bead
BLM18P Series (0603 Size)
c Dimensions
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
c Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
J330mm Paper Tape 10000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM18PG300SN1p30ohm (Typ.) - 1000mA 0.05ohm max. -55 to +125°C
BLM18PG330SN1p33ohm ±25% - 3000mA 0.025ohm max. -55 to +125°C
BLM18PG600SN1p60ohm (Typ.) - 500mA 0.10ohm max. -55 to +125°C
BLM18PG121SN1p120ohm ±25% - 2000mA 0.05ohm max. -55 to +125°C
BLM18PG181SN1p180ohm ±25% - 1500mA 0.09ohm max. -55 to +125°C
BLM18PG221SN1p220ohm ±25% - 1400mA 0.10ohm max. -55 to +125°C
BLM18PG331SN1p330ohm ±25% - 1200mA 0.15ohm max. -55 to +125°C
BLM18PG471SN1p470ohm ±25% - 1000mA 0.20ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Derating of Rated Current
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM18PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating of Rated Current
Operating Temperature (°C)
Rated Current (mA)
850 125
0
1000
500
1200
1400
2000
3000
1500
c Impedance-Frequency Characteristics (Main Items)
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
600
450
300
150
0
BLM18PG471SN1
BLM18PG331SN1
BLM18PG221SN1
BLM18PG181SN1
BLM18PG121SN1
BLM18PG600SN1
BLM18PG330SN1
BLM18PG300SN1
c Impedance-Frequency Characteristics
BLM18PG300SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
00
10
20
30
40
Z
R
X
c Impedance-Frequency Characteristics
BLM18PG330SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
10
20
30
40
50
c Impedance-Frequency Characteristics
BLM18PG600SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
25
50
75
100
Continued on the following page.
3
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
3
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency Characteristics
BLM18PG121SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
200
150
100
50
0
Z
R
X
c Impedance-Frequency Characteristics
BLM18PG181SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
c Impedance-Frequency Characteristics
BLM18PG221SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
100
200
300
Z
c Impedance-Frequency Characteristics
BLM18PG331SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
X
0
150
300
450
ZR
c Impedance-Frequency Characteristics
BLM18PG471SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
X
0
150
300
450
600
ZR
Continued on the following page.
4
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
4
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
2012.1.10
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM03AX Series (0201 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 15000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM03AX100SN1p10ohm (Typ.) - 1000mA 0.05ohm max. -55 to +125°C
BLM03AX800SN1p80ohm ±25% - 500mA 0.18ohm max. -55 to +125°C
BLM03AX121SN1p120ohm ±25% - 450mA 0.23ohm max. -55 to +125°C
BLM03AX241SN1p240ohm ±25% - 350mA 0.38ohm max. -55 to +125°C
BLM03AX601SN1p600ohm ±25% - 250mA 0.85ohm max. -55 to +125°C
BLM03AX102SN1p1000ohm ±25% - 200mA 1.25ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
1500
1250
1000
750
500
250
0
BLM03AX241SN1
BLM03AX100SN1
BLM03AX800SN1
BLM03AX121SN1
BLM03AX102SN1
BLM03AX601SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
4
8
12
16
X
R
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
50
100
150
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
60
120
240
180 Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
80
160
400
320
240
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
300
600
900
1200
Z
R
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics (Main Items) ■ Impedance-Frequency Characteristics
BLM03AX100SN1
■ Impedance-Frequency Characteristics
BLM03AX800SN1
■ Impedance-Frequency Characteristics
BLM03AX121SN1
■ Impedance-Frequency Characteristics
BLM03AX241SN1
■ Impedance-Frequency Characteristics
BLM03AX601SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
Z
R
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM03AX102SN1
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM15AX_SN Series (0402 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 10000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM15AX100SN1p10ohm (Typ.) - 1740mA 0.015ohm max. -55 to +125°C
BLM15AX300SN1p30ohm ±25% - 1100mA 0.06ohm max. -55 to +125°C
BLM15AX700SN1p70ohm ±25% - 780mA 0.1ohm max. -55 to +125°C
BLM15AX121SN1p120ohm ±25% - 680mA 0.13ohm max. -55 to +125°C
BLM15AX221SN1p220ohm ±25% - 580mA 0.18ohm max. -55 to +125°C
BLM15AX601SN1p600ohm ±25% - 420mA 0.34ohm max. -55 to +125°C
BLM15AX102SN1p1000ohm ±25% - 350mA 0.49ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
300
600
900
1200
1500
BLM15AX102SN1
BLM15AX601SN1
BLM15AX221SN1
BLM15AX121SN1
BLM15AX700SN1
BLM15AX300SN1
BLM15AX100SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
4
8
12
16
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
15
30
45
60
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
20
40
60
80
100
120
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
40
80
120
160
200
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics (Main Items) ■ Impedance-Frequency Characteristics
BLM15AX100SN1
■ Impedance-Frequency Characteristics
BLM15AX300SN1
■ Impedance-Frequency Characteristics
BLM15AX700SN1
■ Impedance-Frequency Characteristics
BLM15AX121SN1
■ Impedance-Frequency Characteristics
BLM15AX221SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
300
600
900
1200
1500
R
X
Z
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM15AX601SN1
■ Impedance-Frequency Characteristics
BLM15AX102SN1
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM18PS Series (0603 Size)
c Dimensions
1.6±0.1
0.4±0.1
0.6±0.1
0.8
0.8±0.1
(2)
(1)
(3)
(2)
0.15+0.2
–0.1
0.15+0.2
–0.1
+0.2
–0.1
0.2 min.
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
NFM18PS474R0J3
NFM18PS105R0J3
0
20
40
60
80
100
0.1 1 10 100 1000 3000
c Equivalent Circuit
Input (Output)
(1)
Output (Input)
(3)
(2)
GND
No polarity.
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 500
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFM18PS474R0J3p0.47µF ±20% 2A 6.3Vdc 1000M ohm -55 to +125°C
NFM18PS105R0J3p1.0µF ±20% 2A 6.3Vdc 500M ohm -55 to +105°C
Number of Circuit: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM18PC Series (0603 Size)
c Dimensions
NFM18PC (0.1 to 0.47µF, 2.2µF - 6.3V)
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
0.4±0.1 0.8±0.1
0.25±0.1
0.2±0.1
(1) (3)
(2)
(2)
(in mm)
: Electrode
c Dimensions
NFM18PC (1µF, 2.2µF - 10V)
0.2 min.
0.25±0.1 0.25±0.1
0.8±0.1
0.8±0.1
0.4±0.1
1.6±0.1
0.2 min.
(1) (3)
(2)
(2)
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
20
40
60
80
100
0.1 1 10 100 1000 3000
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3 (6.3V)
NFM18PC225B1A3 (10V)
c Equivalent Circuit
Input (Output)
(1)
Output (Input)
(3)
(2)
GND
No polarity.
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 500
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFM18PC104R1C3p0.1µF ±20% 2A 16Vdc 1000M ohm -55 to +125°C
NFM18PC224R0J3p0.22µF ±20% 2A 6.3Vdc 1000M ohm -55 to +125°C
NFM18PC474R0J3p0.47µF ±20% 2A 6.3Vdc 1000M ohm -55 to +125°C
NFM18PC105R0J3p1.0µF ±20% 4A 6.3Vdc 500M ohm -55 to +105°C
NFM18PC225B0J3p2.2µF ±20% 2A 6.3Vdc 200M ohm -40 to +85°C
NFM18PC225B1A3p2.2µF ±20% 4A 10Vdc 200M ohm -40 to +85°C
Number of Circuit: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
