MMBF4391L, MMBF4392L, MMBF4393L JFET Switching Transistors N-Channel www.onsemi.com Features * S Prefix for Automotive and Other Applications Requiring Unique * 3 Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant 1 2 SOT-23 CASE 318 STYLE 10 MAXIMUM RATINGS Rating Symbol Value Unit Drain-Source Voltage VDS 30 Vdc Drain-Gate Voltage VDG 30 Vdc Gate-Source Voltage VGS 30 Vdc Forward Gate Current IG(f) 50 mAdc 2 SOURCE 3 GATE 1 DRAIN THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) TA = 25C Derate above 25C Symbol PD Max Unit 225 1.8 mW mW/C Thermal Resistance, Junction-to-Ambient RqJA 556 C/W Junction and Storage Temperature Range TJ, Tstg -55 to +150 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR- 5 = 1.0 0.75 0.062 in. MARKING DIAGRAM XXX M G G 1 XXX = Specific Device Code M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. MARKING & ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 1994 October, 2016 - Rev. 12 1 Publication Order Number: MMBF4391LT1/D MMBF4391L, MMBF4392L, MMBF4393L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR)GSS 30 - Vdc - - 1.0 0.20 nAdc mAdc OFF CHARACTERISTICS Gate-Source Breakdown Voltage (IG = 1.0 mAdc, VDS = 0) Gate Reverse Current (VGS = 15 Vdc, VDS = 0, TA = 25C) (VGS = 15 Vdc, VDS = 0, TA = 100C) IGSS Gate-Source Cutoff Voltage (VDS = 15 Vdc, ID = 10 nAdc) MMBF4391LT1 MMBF4392LT1 MMBF4393LT1 VGS(off) Off-State Drain Current (VDS = 15 Vdc, VGS = -12 Vdc) (VDS = 15 Vdc, VGS = -12 Vdc, TA = 100C) ID(off) Vdc -4.0 -2.0 -0.5 -10 -5.0 -3.0 - - 1.0 1.0 nAdc mAdc ON CHARACTERISTICS Zero-Gate-Voltage Drain Current (VDS = 15 Vdc, VGS = 0) MMBF4391LT1 MMBF4392LT1 MMBF4393LT1 IDSS mAdc 50 25 5.0 Drain-Source On-Voltage (ID = 12 mAdc, VGS = 0) MMBF4391LT1 (ID = 6.0 mAdc, VGS = 0) MMBF4392LT1 (ID = 3.0 mAdc, VGS = 0) MMBF4393LT1 VDS(on) Static Drain-Source On-Resistance (ID = 1.0 mAdc, VGS = 0) MMBF4391LT1 MMBF4392LT1 MMBF4393LT1 rDS(on) 150 75 30 Vdc - 0.4 - 0.4 - 0.4 W - - - 30 60 100 - 14 - 3.5 SMALL- SIGNAL CHARACTERISTICS Input Capacitance (VDS = 0 Vdc, VGS = -15 Vdc, f = 1.0 MHz) Ciss Reverse Transfer Capacitance (VDS = 0 Vdc, VGS = -12 Vdc, f = 1.0 MHz) Crss pF pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. ORDERING INFORMATION Device Marking MMBF4391LT1G 6J SMMBF4391LT1G* 6J MMBF4392LT1G 6K MMBF4393LT1G M6G SMMBF4393LT1G* M6G Package Shipping SOT-23 (Pb-Free) 3,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 MMBF4391L, MMBF4392L, MMBF4393L TYPICAL CHARACTERISTICS 1000 TJ = 25C 500 MMBF4391 MMBF4392 MMBF4393 RK = RD' 200 100 500 VGS(off) = 12 V = 7.0 V = 5.0 V 50 20 10 RK = 0 5.0 2.0 1.0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 ID, DRAIN CURRENT (mA) 20 30 TJ = 25C RK = RD' 200 t r , RISE TIME (ns) t d(on) , TURN-ON DELAY TIME (ns) 1000 50 20 10 5.0 RK = 0 2.0 3.0 5.0 7.0 10 ID, DRAIN CURRENT (mA) Figure 1. Turn-On Delay Time 1000 500 TJ = 25C MMBF4391 MMBF4392 MMBF4393 200 100 VGS(off) = 12 V = 7.0 V = 5.0 V RK = RD' 50 20 10 5.0 RK = 0 2.0 1.0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 ID, DRAIN CURRENT (mA) 20 20 30 50 Figure 2. Rise Time t f , FALL TIME (ns) t d(off) , TURN-OFF DELAY TIME (ns) 1000 500 VGS(off) = 12 V = 7.0 V = 5.0 V 100 2.0 1.0 0.5 0.7 1.0 50 MMBF4391 MMBF4392 MMBF4393 30 200 100 TJ = 25C MMBF4391 MMBF4392 MMBF4393 20 RK = 0 10 5.0 Figure 3. Turn-Off Delay Time 2.0 3.0 5.0 7.0 10 20 ID, DRAIN CURRENT (mA) Figure 4. Fall Time www.onsemi.com 3 VGS(off) = 12 V = 7.0 V = 5.0 V 50 2.0 1.0 0.5 0.7 1.0 50 RK = RD' 30 50 MMBF4391L, MMBF4392L, MMBF4393L NOTE 1 VDD RD SET VDS(off) = 10 V INPUT RK RT OUTPUT RGEN 50 W RGG 50 W VGEN INPUT PULSE tr 0.25 ns tf 0.5 ns PULSE WIDTH = 2.0 ms DUTY CYCLE 2.0% 50 W VGG RGG > RK RD' = RD(RT + 50) RD + RT + 50 V fs , FORWARD TRANSFER ADMITTANCE (mmhos) Figure 5. Switching Time Test Circuit The switching characteristics shown above were measured using a test circuit similar to Figure 5. At the beginning of the switching interval, the gate voltage is at Gate Supply Voltage (-VGG). The Drain-Source Voltage (VDS) is slightly lower than Drain Supply Voltage (VDD) due to the voltage divider. Thus Reverse Transfer Capacitance (Crss) of Gate-Drain Capacitance (Cgd) is charged to VGG + VDS. During the turn-on interval, Gate-Source Capacitance (Cgs) discharges through the series combination of RGen and RK. Cgd must discharge to VDS(on) through RG and RK in series with the parallel combination of effective load impedance (R'D) and Drain-Source Resistance (rDS). During the turn-off, this charge flow is reversed. Predicting turn-on time is somewhat difficult as the channel resistance rDS is a function of the gate-source voltage. While Cgs discharges, VGS approaches zero and rDS decreases. Since Cgd discharges through rDS, turn-on time is non-linear. During turn-off, the situation is reversed with rDS increasing as Cgd charges. The above switching curves show two impedance conditions; 1) RK is equal to RD' which simulates the switching behavior of cascaded stages where the driving source impedance is normally the load impedance of the previous stage, and 2) RK = 0 (low impedance) the driving source impedance is that of the generator. 15 20 MMBF4392 10 C, CAPACITANCE (pF) MMBF4391 10 MMBF4393 7.0 Tchannel = 25C 5.0 VDS = 15 V 3.0 2.0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 Cgs 7.0 Cgd 5.0 3.0 2.0 1.5 Tchannel = 25C (Cds is negligible 1.0 0.03 0.05 0.1 50 ID, DRAIN CURRENT (mA) 50 mA 75 mA 100 mA 125 mA r DS(on), DRAIN-SOURCE ON-STATE RESISTANCE (NORMALIZED) r DS(on), DRAIN-SOURCE ON-STATE RESISTANCE (OHMS) IDSS 25 mA = 10 160 mA 120 80 40 Tchannel = 25C 0 0 1.0 2.0 3.0 5.0 4.0 6.0 7.0 VGS, GATE-SOURCE VOLTAGE (VOLTS) 1.0 3.0 5.0 10 30 Figure 7. Typical Capacitance Figure 6. Typical Forward Transfer Admittance 200 0.3 0.5 VR, REVERSE VOLTAGE (VOLTS) 8.0 2.0 1.8 ID = 1.0 mA VGS = 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -70 -40 -10 20 50 80 110 140 170 Tchannel, CHANNEL TEMPERATURE (C) Figure 8. Effect of Gate-Source Voltage on Drain-Source Resistance Figure 9. Effect of Temperature on Drain-Source On-State Resistance www.onsemi.com 4 MMBF4391L, MMBF4392L, MMBF4393L 100 90 80 70 60 50 40 30 20 10 0 10 Tchannel = 25C 9.0 8.0 7.0 rDS(on) @ VGS = 0 6.0 VGS(off) 5.0 4.0 3.0 2.0 1.0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 V GS , GATE-SOURCE VOLTAGE (VOLTS) r DS(on) , DRAIN-SOURCE ON-STATE RESISTANCE (OHMS) NOTE 2 IDSS, ZERO-GATE VOLTAGE DRAIN CURRENT (mA) Figure 10. Effect of IDSS on Drain-Source Resistance and Gate-Source Voltage The Zero-Gate-Voltage Drain Current (IDSS) is the principle determinant of other J-FET characteristics. Figure 10 shows the relationship of Gate-Source Off Voltage (VGS(off)) and Drain-Source On Resistance (rDS(on)) to IDSS. Most of the devices will be within 10% of the values shown in Figure 10. This data will be useful in predicting the characteristic variations for a given part number. For example: Unknown rDS(on) and VGS range for an MMBF4392 The electrical characteristics table indicates that an MMBF4392 has an IDSS range of 25 to 75 mA. Figure 10 shows rDS(on) = 52 W for IDSS = 25 mA and 30 W for IDSS = 75 mA. The corresponding VGS values are 2.2 V and 4.8 V. www.onsemi.com 5 MMBF4391L, MMBF4392L, MMBF4393L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AR D 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0_ MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 --- 10 _ MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0_ INCHES NOM MAX 0.039 0.044 0.002 0.004 0.017 0.020 0.006 0.008 0.114 0.120 0.051 0.055 0.075 0.080 0.017 0.022 0.021 0.027 0.094 0.104 --- 10 _ STYLE 10: PIN 1. DRAIN 2. SOURCE 3. GATE END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBF4391LT1/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: SMMBF4393LT1G