Tippette
Full Sized Rocker Switches
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: sales@carlingtech.com • www.carlingtech.com
The Tippette Series is a traditionally styled rocker switch, available in sealed or
unsealed versions. These switches are appropriate for use in general purpose
applications which may or may not require a modicum of environmental protection.
The Tippette Series is available in both illuminated and non-illuminated versions and
features a wide variety of circuits, actuator styles and bracket options. This versatile
offering includes international agency certifications and ratings to 26 amps for
select circuits.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
2 |
*Angled corners are suggested for optimum fit.
Standard rectangular cutout is acceptable.
4 plcs
*
.680[17.27]
1.190[30.22]
1.450[36.83]
55
.830[21.08]
MOUNTING HOLE
(Nylon Snap-in Brackets)
Panel Thickness:
.040 min. - .250 max.
Tippette Switches (TIG,TIH,TII & LTIL,LTIG) - General Specications
Physical
Agency Certifications
Mounting
Electrical
Mechanical
Contact Rating 15 amps, 125 VAC
10 amps, 250 VAC
3/4 HP 125-250 VAC
15 amps, 12-30 VDC
Life 25,000 cycles circuit dependent
50,000 cycles circuit dependent
consult factory for applicable
circuits.
Contacts Fine silver, silver cad-oxide
Terminals Brass or copper/silver plate
1/4” (6.3mm) Quick Connect
terminations standard.
Solder lug - Brass Tin Plated
Wire Lead 16 gauge standard 105°C
600VAC
Screw Terminals - Brass
Endurance 100,000 cycles minimum
Lighted Incandescent - rated 10,000 hours
Neon - rated 25,000 hours
Seals Bracket - Actuator WBL/MBL
optional external gasket panel seal
Base Phenolic (150°C)
Rocker/Bracket Nylon 66 (105°C)
Select circuits and constructions with IEC approvals are
available. Consult factory
*Manufacturer reserves the right to change product specification without prior notice.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 3
1
Base Part Number
1
Base Part Number
2
Actuator Style
2
Actuator Style
3
Actuator Color
3
Actuator Color
4
Lens Color
4
Bracket
5
Bracket
6
Lamp Voltage
TIGA51
LTILA51
6M
6M
BL
BL RC
MBL
MBL 12V
1 BASE PART NUMBER: SERIES/POLES/CIRCUITRY8,11,13/RATING7/TERMINATION10
10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 6-28VDC7
Single Pole in Double Pole base2 Double Pole
solder .250 screw wire solder .250 screw wire
lug tab term. leads lug tab term. leads
TIGA50 TIGA51 TIGA54 TIGA55 On-None-Off TIGK50 TIGK51 TIGK54 TIGK55
TIGA5A TIGA5B TIGA5E TIGA5F (On)-None-Off TIGK5A TIGK5B TIGK5E TIGK5F
TIGA5L TIGA5M TIGA5S TIGA5T On-None-(Off) TIGK5L TIGK5M TIGK5S TIGK5T
TIGB50 TIGB51 TIGB54 TIGB55 On-None-On TIGL50 TIGL51 TIGL54 TIGL55
TIGB5A TIGB5B TIGB5E TIGB5F On-None-(On) TIGL5A TIGL5B TIGL5E TIGL5F
TIGC50 TIGC51 TIGC54 TIGC54 On-Off-On TIGM50 TIGM51 TIGM54 TIGM55
TIGC5A TIGC5B TIGC5E TIGC5F On-Off-(On) TIGM5A TIGM5B TIGM5E TIGM5F
TIGC5L TIGC5M TIGC5S TIGC5T (On)-Off-(On) TIGM5L TIGM5M TIGM5S TIGM5T
Three Pole Four Pole
solder .250 screw wire solder .250 screw wire
lug tab term. leads lug tab term. leads
TIHK50 TIHK51 TIHK54 TIHK55 On-None-Off TIIK50 TIIK51 TIIK54 TIIK55
TIHK5A TIHK5B TIHK5E TIHK5F (On)-None-Off TIIK5A TIIK5B TIIK5E TIIK5F
TIHK5L TIHK5M TIHK5S TIHK5T On-None-(Off) TIIK5L TIIK5M TIIK5S TIIK5T
TIHL50 TIHL51 TIHL54 TIHL55 On-None-On TIIL50 TIIL51 TIIL54 TIIL55
TIHL5A TIHL5B TIHL5E TIHL5F On-None-(On) TIIL5A TIIL5B TIIL5E TIIL5F
TIHM50 TIHM51 TIHM54 TIHM54 On-Off-On TIIM50 TIIM51 TIIM54 TIIM55
TIHM5A TIHM5B TIHM5E TIHM5F On-Off-(On) TIIM5A TIIM5B TIIM5E TIIM5F
TIHM5L TIHM5M TIHM5S TIHM5T (On)-Off-(On) TIIM5L TIIM5M TIIM5S TIIM5T
VDE APPROVED
10A 250VAC, 15A 125VAC, 12(6)A 250VAC T85
Single Pole in Double Pole base2 Double Pole
solder .250 wire solder .250 wire
lug tab lead lug tab lead
TIGA90 TIGA91 TIGA95 On-None-Off TIGK90 TIGK91 TIGK95
TIGB90 TIGB91 TIGB95 On-None-On TIGL90 TIGL91 TIGL95
TIGC90 TIGC91 TIGC95 On-Off-On TIGM90 TIGM91 TIGM95
1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/CIRCUITRY12/RATING10/TERMINATION14
10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC
illuminated Single Pole in Double Pole base illuminated Double Pole
solder .250 screw wire solder .250 screw wire
lug tab term. leads lug tab term leads
LTILA50 LTILA51 LTILA54 LTILA55 On-None-Off LTIGK50 LTIGK51 LTIGK54 LTIGK55
LTILA5A LTILA5B LTILA5E LTILA5F (On)-None-Off LTIGK5A LTIGK5B LTIGK5E LTIGK5F
LTILA5L LTILA5M LTILA5S LTILA5T On-None-(Off) LTIGK5L LTIGK5M LTIGK5S LTIGK5T
LTILB50 LTILB51 LTILB54 LTILB55 On-None-On LTIGL50 LTIGL51 LTIGL54 LTIGL55
LTILB5A LTILB5B LTILB5E LTILB5F On-None-(On) LTIGL5A LTIGL5B LTIGL5E LTIGL5F
LTILC50 LTILC51 LTILC54 LTILC55 On-Off-On LTIGM50 LTIGM51 LTIGM54 LTIGM55
LTILC5A LTILC5B LTILC5E LTILC5F On-Off-(On) LTIGM5A LTIGM5B LTIGM5E TIGM5F
LTILC5L LTILC5M LTILC5S LTILC5T (On)-Off-(On) LTIGM5L LTIGM5M LTIGM5S LTIGM5T
2 ACTUATOR STYLE
1S Angular/Smooth Face Gloss12
1C Angular/Cross Serations Gloss12
1F Flatted/Smooth Face Gloss12
1L Angular/Longline Serrations Gloss1,12
2L Long Smooth/Narrow15
6M Curved/Smooth Face Matte3
6S Curved/Smooth Face Gloss3
7S Rounded Paddle/Smooth Face Gloss1
7N Witch’sHat/Narrow15
7P Witch’sHat/Wide15
3 ACTUATOR COLOR9
BL black WH white RD red
3 ACTUATOR COLOR11
BL black WH white RD red
4 LENS COLOR13
AM amber RC red GN green7
LU blue7 CL clear WH white
2 ACTUATOR STYLE4
1S Angular/Smooth Face Gloss1
1C Angular/Cross Serations Gloss1
1L Angular/Longline Serrations Gloss1
6M Curved/Smooth Face Matte3
6S Curved/Smooth Face Gloss3
7S Rounded Paddle/Smooth Face Gloss2
5 BRACKET STYLE11
NBL Nylon Black
WBL Watershedding Black5
MBL Marine Style Black5,8
FN Metal Snap-In4,6
FN BLK Black Metal Snap-In4,6
FN SS Stainless Steel Snap-In4,6
6 LAMP VOLTAGE
neon9
125N 125 volt 250N 250 volt
incandescent
6V 6 volt 12V 12 volt 18V 18 volt
24V 24 volt 28V 28 volt
4 BRACKET STYLE9
A Screw Mount5
B Screw Mount5,12
C Screw Mount5
H Screw Mount5
NBL Nylon Black
WBL Watershedding Black4
MBL Marine Style Black4,6
FN Metal Snap-In5
FN BLK Black Metal Snap-In5
FN SS Stainless Steel Snap-In5
FW Wide Stainless Steel Snap-In5
Notes:
1 NBL, FN, & FW brackets only.
2 For single pole switch in a single pole base, specify TIL
with single pole circuitry/rating/termination.
3 NBL, WBL, & MBL brackets only. With 6M actuator,
bracketsalsowillbemattenish.
4 6M & 6S actuators only
5 Not available with 6M & 6S actuators.
6 Consists of WBL bracket, neoprene seal, and dummy
rivets at open holes. Consult factory for agency approval
status.
7 All ratings are appropriate for usage in low voltage
applications.
8 For additional special circuits, see page 21......?!?!?!
9 Custom colors are available, consult factory.
10 .187 tab and PC terminations are also available. Consult
factory for catalog number callout.
11 ( ) momentary
12 Not available with WBL or MBL style brackets.
13 Additional circuits available. See page 21.
14 AvailablewithbracketA,CorHonly.
15 NotavailablewithMBL,WBLorHbrackets.Canbe
supplied as a double rocker to control separate poles of
aTIG,TIHorTIIswitch.Consultfactoryfordetails.
Notes:
1 NBL, FN, & FW brackets only. Double pole circuits provided with 3 pole base.
2 LTIL-Series with NBL, FN, & FW brackets only.
3 NBL,WBL,&MBLbracketsonly.With6Mactuator,bracketwillalsobemattenish.
4 1S, 1C, 1L & 7S with NBL bracket only available with LTIL-Series.
5 6M, 6S actuators only.
6 Not available with 6M and 6S actuators.
7 Not recommended with neon lamps.
8 Consists of WBL bracket, neoprene seal, dummy rivets at open holes. Consult factory for agency approval status.
9 Not recommended with blue or green lenses.
10 All ratings are appropriate for usage in low voltage applications.
11 Custom colors and additional bracket styles are available, consult factory.
12 ( ) - momentary
13 Alldoublethrowcircuitssuppliedwithtwolenses.Tospecifytwodifferentlenscolors,specifysecondcolor,afterrstcolor.
(ex. LTIGM51-6S-BL-RC/GN-WBL-12V)
14 .187 tab and PC terminations are also available. Consult factory for catalog number callout.
TIG/TIH/TII & LTIL/LTIG-Series Rocker & Paddle Switches
Additionalratingsupto20A125-277VAC,11/2HP125VAC,2HP250VACareavailable.
Consultfactoryforspecics.
Additionalratingsupto12A250VAC,17A125VAC,3/4HP125VAC,1HP250VACareavailable.
Consultfactoryforspecics.
Threepoleswitchisalsoavailable:SubstituteHforfourthdigitofpartnumber.ex.LTIHK51
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
4 |Tippette Rocker & Bracket Styles
.960[24.38]
1.069[27.15]
.422[10.72]
.900[22.86]
1.080[27.43]
.060[1.52]
.650[16.51].960[24.38]
1.069[27.15]
.312[7.92]
±.020
.422[10.72]
1.069[27.15]
.418[10.62]
.960[24.38]
.650[16.51]
1.080[27.43]
.060[1.52]
.900[22.86]
.356[9.04]
1L
LONG-LINE W/ONE LENS
1.440[36.58]
WITH SOLDER LUG
TERMINAL
AND NBL BRACKET
1.700[43.18]
1.700[43.18]
WITH SOLDER LUG
TERMINALS
AND NBL BRACKET
.422[10.72] 1.440[36.58]
1C
CROSS-LINE W/ONE LENS
WITH.250 TAB
TERMINALS
AND NBL BRACKET
.312[7.92]
.418[10.62]
1.440[36.58]
1.700[43.18]
WITH.250 TAB
TERMINALS
AND FN BRACKET
1F
FLATTED STYLE NO LENS 6M, 6S
CURVED W/ONE LENS
1.570[39.88]
WITH.250 TAB
TERMINALS
AND FN BRACKET
1.700[43.18]
.828[21.03]
1.570[39.88]
WITH.250 TAB
TERMINALS
AND NBL BRACKET
7S
TOGGLE-STYLE W/ONE LENS
1S
SMOOTH W/ONE LENS
±.020
±.020
.422[10.72]
±.020
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 5
SPECIAL CIRCUITS FOR TIPPETTE ROCKER SWITCHES
Circuit Position 1 Position 2 Position 3
Progressive Two Circuit
GG BOTHCIRCUITSON ONECIRCUITON OFF
GG BOTHCIRCUITS(ON) ONECIRCUITON OFF
Single Pole Triple Throw
GE ON ON ON
Two Circuit
GH CIRCUIT1ON BOTHCIRCUITSON CIRCUIT2ON
GP CIRCUIT2ON CIRCUIT1ON OFF
Reversing Double Pole Double Throw
GO ON OFF ON
GX ON NONE ON
( ) Indicates momentary function.
Tippette Actuator Styles
.187[4.75]
.187[4.75]
.350[8.89]
.187[4.74]
.187 TAB (Q.C.)
.141[3.58]
.286[7.26]
.370[9.39]
.187[4.74] .250[6.35]
.500[12.70]
.250 TAB (Q.C.) SOLDER LUG
#6-32NC-2
THREAD
MOUNTING HOLE
(Nylon Snap-in Brackets)
Panel Thickness:
.030 min. - .250 max.
Switch should be mounted at 90˚
for maximum water shedding
(45˚ to 90˚ acceptable)
.392[9.95]
.830[21.08]
55˚
1.450[36.83]
1.190[30.22]
4 plcs*
.394[10.00]
.055[1.40] DIA
.372[9.45]
.125[3.18] DIA
.330[8.38]
.075[1.91] DIA
.437[11.09]
SCREW
(ASSEMBLED) PRINTED
CIRCUIT
IEC APPROVED CONSTRUCTION
(TIG ONLY)
1.069[27.15]
.650[16.51]
.820[20.82]
1.069[27.15]
WIRE LEAD
* Angled corners are
suggested for optimum fit.
Standard rectangular
cutout is acceptable.
6.000[152.40]
TERMINAL TYPE
.075[1.905]
.490[22.86]
.680[17.27]
.650[16.51].650[16.51]
1C
TIL,TIG,TIH,TII
1.224[31.08]
2L
TIL,TIG,TIH,TII
.312[7.92]
.957[24.30]1.224[31.08]
7N
TIG
1L
TIL,TIG,TIH,TII
1F
TIG, TII
7S
TIG
.957[24.30]
.300[7.62]
1.224[31.08]
.650[16.51]
.430[10.90]
.880[22.40]
.250[6.35]
1.224[31.08]
.996[25.30]1.035[26.28]
.957[24.30]
1.024[26.00]
.630[16.00]
.880[22.4]
.650[16.51]
.957[24.30]
.650[16.51]
7P
TIG
1S
TIL,TIG,TIH,TII
6S
TIG
1.224[31.08].957[24.30]1.224[31.08] 1.224[31.08]
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
6 |Tippette Mounting Bracket Styles
Dimensional Specifications: in. [mm]
1.625[41.27]
A
TIH
55˚
.680[17.27]
MOUNTING HOLE
(Nylon Snap-in Brackets)
Panel Thickness:
.030 min. - .250 max.
* Angled corners are suggested for
optimum fit. Standard rectangular
cutout is acceptable.
4 plcs*
.426[10.82]
C
TIG
.426[10.82]
.156[3.96]
A
TIL
.156[3.96]
A
TIG
1.625[41.27]
A
TII
.070[1.77]
6-32NC-2 TAP
#
.156[3.96] DIA.156[3.96] DIA
1.700[43.18]
.960[24.38]
.430[10.92]
MBL, NBL, WBL
TIG
BLACK NYLON, SNAP-IN
HOLE PLUG
FOR TIL, TIG, TIH & TII
.078[1.98]
1.625[41.27]
1.750[44.45]
FW
TIL, TIG, TIH, TII
METAL, SNAP-IN
1.625[41.27]
1.940[49.27]
1.625[41.27]
2.090[53.08]
1.625[41.27]
CLEARANCE HOLE
Standard with
C Bracket
GCP GMP
GLOSS FINISH MATTE FINISH
.900[22.86]
.437[11.09]
CX
TIL
1.126[28.60]
H
TIG
WIDE
1.625[41.27]
1.875[47.62]
1.570[39.87]
NARROW
FN
TIL, TIG, TIH, TII
METAL, SNAP-IN
.158[4.01] DIA
1.940[49.27]
2.093[53.16]
1.625[41.27]
1.625[41.27]
TAPPED HOLE
Standard with
A & B Brackets
1.350[34.29]
1.950[49.53]
.960[24.38]
.078[1.98]
1.940[49.27]
.078[1.98] .078[1.98]
1.960[49.78]
B
TIL
B
TII, TIG
MARINE / STD / WATERSHEDDING
1.450[36.83]
1.892[48.06]
1.625[41.27]
.830[21.08]
1.570[39.88]
1.700[43.18]
2.062[52.37]
1.190[30.22]
C
TIH, TII
TIL TIG TII TIH
REV_SW_Tippette_0712