A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - KT Reed Relays KT Series Reed Relays Features: High Voltage Through-Hole or SMD Relay, High Dielectric Strength, AEC-Q200 Certified Applications: Inverters in Photovoltaic Collectors, Automotive, Battery Management Systems & Others Markets: E-Cars, Solar & Others, Test & Measurement & Others KT 00-1A-40L-XXX Part Description: Coil Voltage Contact QTY Contact Form Pin Out Version 05, 12, 24 1 A 40L THT, SMD Customer Options Contact Data Switch Model Rated Power (max.) 100 W 1,000 V 1.0 A 2.5 A 150 mOhm 3.0 kVDC 1.1 ms 0.1 ms 1010 Ohm 0.5 pF 85 Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA Breakdown Voltage (min.) According to EN60255-5 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Unit Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - KT Reed Relays Coil Data Contact Switch Form Model Unit 1A Coil Voltage (nom.) Coil Resistance (typ.) Pull-In Voltage (max.) Drop-Out Voltage (min.) Nominal Coil Power (typ.) VDC 05 12 24 Ohm 80 475 1,800 VDC 3.5 8.4 16 VDC 0.6 1.4 2.9 mW 313 303 320 85 The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per C. Relay Data Unit Dielectric Strength Coil/Contact (min.) 7 kVDC 1013 Ohm 1.2 pF 30 g 20 g Operating Temperature -40 to 100 C Storage Temperature Soldering Temperature (max.) -40 to 125 C 260 C according to EN60255-5 Insulation Resistance Coil/Contact (typ.) Rh<45%, 200V Test Voltage Capacitance Coil/Contact (typ.) @ 10 kHz Shock Resistance (max.) 1/2 sine wave duration 11ms Vibration Resistance (max.) 5 sec. max. Washability Fully Sealed KT Reed Relay Handling & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays' electrical characteristics. Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. Life Test Data *Load increase reduces life expectancy of Reed Switches Glossary Contact Form Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Changeover SPDT = Single Pole Double Throw USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - KT Reed Relays Layout Top View Pad-Layout THT Pad-Layout SMD USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015