Amphenol ACA-B
Reverse Bayonet Coupling
Connectors
12-027-1
Am
p
henol
®
The Industrial Connector for Factory Automation, Robotics,
Process Control and Test & Measurement Equipment.
Table of Contents Page No.
Amphenol® ACA-B Reverse Bayonet Coupling Connectors
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Insert alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Contact arrangements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24
ACA-B Connector Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ACA 3100F-B wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . 26
ACA 3100E-B wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . 27
ACA 3100G-B wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . 28
ACA 3100R-B wall mount receptacle for front panel mounting . . . . . . . . . . . . . . . . 29
ACA 3101F-B cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 30
ACA 3101E-B cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 31
ACA 3101G-B cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 32
ACA 3101R-B cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 33
ACA 3102E-B box mount receptacle for front panel mounting . . . . . . . . . . . . . . . . 34
ACA 3103F-B wall mount receptacle for rear panel mounting . . . . . . . . . . . . . . . . 3 5
ACA 3103E-B wall mount receptacle for rear panel mounting . . . . . . . . . . . . . . . . 3 6
ACA 3103G-B wall mount receptacle for rear panel mounting . . . . . . . . . . . . . . . . 37
ACA 3103R-B wall mount receptacle for rear panel mounting . . . . . . . . . . . . . . . . 3 8
ACA 3106F-B straight plug . . . . . . . . . . . . . . . . . . . . . . . . . 3 9
ACA 3106E-B straight plug . . . . . . . . . . . . . . . . . . . . . . . . . 40
ACA 3106G-B straight plug . . . . . . . . . . . . . . . . . . . . . . . . . 41
ACA 3106R-B straight plug . . . . . . . . . . . . . . . . . . . . . . . . . 42
ACA 3107A-B jam nut receptacle. . . . . . . . . . . . . . . . . . . . . . . . 4 3
ACA 3108F-B 90 degree angle plug . . . . . . . . . . . . . . . . . . . . . . . 44
ACA 3108E-B 90 degree angle plug . . . . . . . . . . . . . . . . . . . . . . . 45
Connector Accessories - sealing gaskets . . . . . . . . . . . . . . . . . . . . . . 46
Connector Accessories - receptacle protection caps . . . . . . . . . . . . . . . . . . . 47
Accessories - plug protection caps . . . . . . . . . . . . . . . . . . . . . . . . 48
Accessories - rear mounting data - receptacles, sealing plugs, sealing ranges. . . . . . . . . . . . . 4 9
Accessories - crimp and solder contact information. . . . . . . . . . . . . . . . . . . 50-52
ACA-B Connectors How to Order, connector intermateability. . . . . . . . . . . . . . . . . . . . . 53
Sales office listing
For further information on your individual application requirements, contact:
Amphenol Corporation
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 607-563-5011 Fax: 607-563-5351
View and download or print Amphenol catalogs on-line at: www.amphenol-industrial.com
Amphenol Aerospace is a Certified ISO 9001 Manufacturer
1
Amphenol ACA-B Connectors
with reverse bayonet coupling
The ACA- B is des igned for commercial and Industrial
envir onment s requi ring a rugged ba yonet style conne c-
tor for heav y duty power and sig nal ap plications .
A comp rehensive selection of insert arr angements and acces-
sory hardware configurations are featured to accommodate
heavy-duty, commercial wire and cable.
ACA-B is manufactured in accordance with MIL-DTL-5015 and
VG95234. The insulators are made of high quality polychloro-
prene material and can withstand temperatures of –55 to +125
degree s C. T he rug ged she ll i s made fr om alum in um al lo y and
plated with a variety of finishes to meet any application. Con-
tacts are machined from copper alloy or brass and can be
plated with gold or silver.
Common applications include automation, machine tool, robot-
ics, instrumentation, process control, material handling, and
test and measurement.
Features of the Amphenol ® ACA-B Reverse
Bayonet Coupling Connectors with MIL-DTL-
5015 insert patterns:
• Quick positive coupling
• Audible and tactile indication of full coupling
• Waterproof - IP67 rated
• No lockwiring required
• High shock and vibration capabilites
• Inserts available in Neoprene
• Available in both crimp and solder terminations
• Contacts available in gold and silver plating
• Numerous finishes available
• Zinc alloy plating (cadmium free) available
• Rugged construction
• Intermateable with existing VG95234 connectors
• 500 couplings minimum
• Up to 50% more ampacity with the use of RADSOK®
socket contacts. Consult Amphenol Industrial Opera-
tions for more information or see Amphenol® Amphe-
Power Connectors with RADSOK® Technology, SL-
391 (online at www.amphenol-industrial.com).
• Operating temperature range: -55°c to 125°c
RoHS Compliant Product
Available – Cons ult
Amphenol Industrial Operations.
®
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
2
ACA-B
insert availability
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax
04812
10SL-3 A 3 3
10SL-4† A 2 2
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14S-A7 A 7 7
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
16-59 A 4 4
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
18-30 A 5 5
18-31 A 5 5 †10SL-4 arrangement available only with pin contacts in receptacle and socket
contacts in plug
**Coaxial cable data can be found on insert arrangement drawings, pages 6-24.
For further information on coaxial contacts and cable see catalog 12-130.
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-26 A 19 19
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax
04812
*Cri mp c ont acts acco mmo dat e wir e th e sa me s ize as t he co nta ct as we ll as wir e of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 6-24 for application wire size.
3
ACA-B
insert availability, cont.
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
22-33 D/A 7 7
22-34 D 5 3 2
22-63 A 12 4 8
22-65 D/A 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 133
24-17 D 5 2 3
24-19 A 12 12
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 337
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
24-96 Inst. 28 28
24-AJ A 25 25
28-1 D/A 9 3 6
28-2 D 14 2 12
28-3 E 3 3
28-4 E/D 9 2 7
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 6 6
28-10 D/A 7 223
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/
Inst. 12 12
28-19 B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
28-AY A 9 4 5
32-1 E/D 5 2 3
32-2 E 5 3 2
32-3 D 9 12 24
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 E/B/D/A 7 2 2 3
32-12 A/D 15 5 10
32-13 D 23 5 18
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
*Cri mp con tact s ac comm oda te w ire t he s ame siz e as t he c onta ct a s wel l as wir e of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 6-24 for application wire size.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-24.
For further information on coaxial contacts and cable see catalog 12-130.
4
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-22 A 54 54
32-25 A 25 25
32-31 A 31 31
32-48 Inst. 48 48
32-52 D 8 2 6
32-53 E/Inst. 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-59 A 42 40 2
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
32-82 A 16 4 12
32-AF A 55 55
32-AM A 1 1 size 4/0
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
ACA-B
insert availability, cont.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-24.
For further information on coaxial contacts and cable see catalog 12-130.
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 556
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-22 D 22 22
36-51 D 4 2 2
36-52 A 52 52
36-54 A 39 8 31
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
36-97 C 1 1 size 4/0
36-99 D 12 3333
36-AF A 48 48
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0 4 8 12 16 Coax**
04812
*Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identified with an asterisk (*)
are exceptions. See insert arrangement drawings on pages 6-24 for applica-
tion wire size.
5
AB
AB
A
B
A
B
ACA-B
insert alternate positioning
To avoid cross-plugging problems in applications requir-
ing the use of mor e than one co nne ctor of th e same siz e
and arrangement, alternate rotations are available as
indicated in the accompanying charts.
As sh own in the diagram b elow, the fr ont face o f the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the normal shell key.
Position W Position X Position Y Position Z
View loo king into fron t face of pin inser t or rear of socket insert.
The following insert arrangements have the same alter-
nate insert rotations for W, X, Y and Z, which are:
Degrees
WX YZ
80 110 250 280
16-7 20-16 22-18 24-4 24-28 28-16 32-10
18-5 20-20 22-19 24-5 24-AJ 28-17 32-12
18-9 20-22 22-21 24-6 28-1 28-19 32-13
18-13 22-3 22-24 24-7 28-4 28-20 32-22
18-14 22-6 22-25 24-12 28-8 28-21 32-AF
20-7 22-12 22-29 24-14 28-9 32-1 36-1
20-8 22-14 22-33 24-16 28-10 32-3 36-7
20-9 22-15 22-34 24-17 28-11 32-4 36-8
20-12 22-16 24-1 24-20 28-14 32-6 36-13
20-14 22-17 24-3 24-21 28-15 32-9
Insert
Arrangement Degrees
WXYZ
10SL-4 63 – – –
14S-2 – 120 240 –
14S-5 – 110 – –
14S-7 90 180 270 –
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270 –
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 – – 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270 –
16S-8 – 170 265 –
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 – – 290
18-10 – 120 240 –
18-11 – 170 265 –
18-12 80 – – 280
18-15 – 120 240 –
18-20 90 180 270 –
18-22 70 145 215 290
18-29 90 180 270 –
20-3 70 145 215 290
20-4 45 110 250 –
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 – – 280
20-17 90 180 270 –
20-18 35 110 250 325
20-19 90 180 270 –
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 – – 280
20-33 –––280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 – 110 250 –
22-23 35 – 250 –
22-27 80 – 250 280
22-28 80 – – 280
24-2 80 – – 280
24-9 35 110 250 325
24-10 80 – – 280
24-11 35 110 250 325
24-22 45 110 250 –
24-27 80 – – 280
24-96 65–––
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
28-7 35 110 250 325
Insert
Arrangement Degrees
WXYZ
*Additional rotations available; consult Amphenol for
information.
28-12 90 180 270 –
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250 –
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250 –
32-25 60 120 – –
32-64* 80 100 110 250
32-68 30–––
32-82 30–––
36-3 70 145 215 290
36-4 70 145 215 290
36-5 – 120 240 –
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270 –
36-15 60 125 245 305
36-AF 65–––
Insert
Arrangement Degrees
WXYZ
6
AB
C
A
B
C
D
A
B
CD
E
F
GAB
100° Rotation
of 14S-2 100° Rotation
of 14S-7
100˚ A
BC
D
100˚
A
B
C
A
F
E
D
C
B
G
FA
B
C
D
EA
B
C
AB
A
BC
D
A
B
C
D
E
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 10SL-3 10SL-4 14S- 2 14S- 4 14S-5
Service Rating A A Inst. D Inst.
Number of Contacts 3 2 4 1 5
Contact Size 16 16 16 16 16
Insert Arran gement 14S-6 14S-7 14S-9 14S-10 14S-12 14S-A7
Service Rating Inst. A A Inst. A A
Number of Contacts 6324 37
Contact Size 16 16 16 16 16 16
Insert Arrangement 16S-1 16S-3 16S-4 16S-5 16S- 6 16S-8
Service Rating ABDA AA
Number of Contacts 7123 35
Contact Size 16 16 16 16 16 16
Insert Arrang ement 16-2 16-7 16-9
Service Rating E A A
Number of Contacts 1 1 2 2 2
Contact Size 12 8 16 12 16
CONTACT LEGEND 16 12 8 4 0
Front of
Socket Insert Front of
Socket Insert
ABC
AB
A
BC
A
B
CA
B
C
DE
7
100° Rotation
of 18-9
100˚
A
B
C
D
E
F
G
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 16-10 16- 11 16-12 16-13 16-59
Service Rating A A A A A
Number of Contacts 3 2 1 2* 4
Contact Size 12 12 4 12 12
Insert Arrang ement 18-1 18-3 18-4 18-5 18-6 18-7
Service Rating B, C, F, G = A; Bal. = Inst. D D D D B
Number of Contacts 10 2 4 2 1 1 1
Contact Size 16 12 16 12 16 4 8
Insert Arran g ement 18-8 18-9 18-10 18-11 18-12 18-13
Service Rating A Inst. A A A A
Number of Contacts 1 7 2 5 4 5 6 1 3
Contact Size 12 16 12 16 12 12 16 8 12
Insert Arran g ement 18-14 18- 15 18-17 18-19 18-20
Service Rating A A Inst. A A
Number of Contacts 1 1 4** 2 5 10 5
Contact Size 4 1 6 12 12 16 16 16
CONTACT LEGEND 16 12 8 4 0
* A = Iron; B = Constantan
**A, C = Iron; B, D = Constantan
B
CA
A
B
AB
A
B
C
D
E
F
GH
I
J
AB
AB
CD
A
BC
D
A
BC
A
B
C
D
E
FG
H
A
B
C
D
E
F
G
A
BC
DA
BC
D
E
A
B
C
D
EF
A
B
C
D
A
B
A
B
C
D
A
BC
DEF G
H
K
J
AB
C
D
E
8
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 18-22 18-24 18-29 18-30 18-31 20-2
Ser vice Rating D B, C, F, G = A; Ba l. = Ins t. A A A D
Number of Contacts 3 10 5 5 5 1
Contact Size 16 16 16 16 16 0
Insert Arrang ement 20-3 20-4 20-6 20-7 20-8 20-9
Service Rating D D D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A
Number of Contacts 3 4 3 8 2 4 1 7
Contact Size 12 12 16 16 8 16 12 16
Insert Arran gement 20-11 20-12 20-14 20-15 20-16 20-17
Service Rating Inst. A A A A A
Number of Contacts 13 1 1 2 3 7 2 7 5 1
Contact Size 16 4 1 6 8 12 12 12 16 12 16
CONTACT LEGEND 16 12 8 4 0
110° Rota tion
of 18-20
250° Rotation
of 18-1 260° Rotation
of 18-20
AB
G
250˚
A
B
C
D
E
F
GH
I
J
A
B
C
D
E
110˚
AB
C
D
E
260˚
AB
C
D
E
A
BC
A
B
D
C
A
BC A
B
C
D
EF
A
B
C
DE
F
GH
A
B
C
DE
F
GH
A
BC
D
E
F
GH
J
K
L
M
N
A
B
A
B
C
D
EA
B
CD
EG
F
A
B
C
D
EFG
H
IA
BC
D
E
F
9
ABC
D
E
F
G
HSR
JTVP
KLM
UN
A
B
CD
EG
F
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran gement 20-18 20-19 20-20 20-21 20-22 20-23
Service Rating AA AAAA
Number of Contacts 3 6 3 1 3 1 8 3 3 2
Contact Size 12 16 8 4 12 12 16 8 16 8
Insert Arran gement 20-24 20-25 20-26 20-27 20-29 20-30
Service Rating A Inst. A A A Inst.
Number of Contacts 2 2 13 19 14 17 13
Contact Size 816161616 16 16
Insert Arran gement 20-33 20-51 20-57 20-58 20-59 20-66
Service Rating A A A A A A
Number of Contacts 11 3* 7* 5 5 3* 1 5
Contact Size 16 8 12 for #14 or 16 wire 12 16 8 for #10 or 12 wir e 16 12 for #10 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
250° Rotation
of 20-11
100° Rotation
of 20-11
AB
C
D
E
FGH
I
A
BC
A
B
C
D
AB
C
D
E
F
G
HI
A
B
C
D
E
F
A
B
A
B
C
D
100˚
A
BC
D
E
F
GH
J
K
L
M
N
AB
C
D
EF
G
H
IJ
K
L
M
N
ABC
D
E
F
G
H
J
K
L
MN
PT
SR
250˚
A
BC
D
E
F
GH
J
K
L
M
N
AB
C
D
E
F
K
H
JM
L
A
B
CA
B
C
A
BC
DE
F
H
J
K
L
A
BC
D
E
F
10
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrang ement 20-79 22-1 22-2 22-4 22-5
Service Rating H=D; Bal. = A D D A D
Number of Contacts 7* 1* 2 3 2 2 2 4
Contact Si ze 16 12 for #16 wire 8 8 8 12 12 16
Insert Arrangement 22-6 22-7 22-8 22-9 22-10
Service Rating D E E E E
Number of Contacts 2 1 1 2 3 4
Contact Size 8 16 0 12 12 16
Insert Arran g ement 22-11 22-12 22-13 22-14 22-15
Service Rating B D E = D; A, B, C, D = A A D = E; A, B, C, E, F = A
Number of Contacts 2 23 41 19 51
Contact Size 16 8 16 12 16 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
AB
A
B
C
A
B
C
D
A
B
CD
E
F
A
B
C
AB
A
BC
A
BC
D
AB
A
B
CD
E
A
B
C
DE
ABC
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
E
F
C
D
11
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 22-16 22-17 22-18 22-19 22-20
Service Rating A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A A A
Number of Contacts 3 6 1 8 8 14 9
Contact Size 12 16 12 16 16 16 16
Insert Arran g ement 22-21 22-22 22-23 22-24 22-27
Service Rating A A H = D; Bal. = A C , D, E = D; A, B, F = A J = D; Bal. = A
Number of Contacts 1 2 4 8 2 4 1 8
Contact Size 0 16 8 12 12 16 8 16
Insert Arran g ement 22-28 22-33 22-34 22-63 22-65
Service Rating A A, B, C, D = D; E. F. G = A D A H = D; Bal. = A
Number of Contacts 7 7 3 2 4 8 8*
Contact Si ze 12 16 12 16 12 16 12 for #14 or 16 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
FGH
J
AB
C
D
E
F
GH
J
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
KLM
N
P
A
B
CDE
F
GH
J
A
B
C
A
BC
DA
B
C
D
E
FG
H
A
B
C
D
E
F
AB
C
D
E
F
G
H
J
A
B
C
E
F
G
D
A
BC E
FG
D
A
BC
DE
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
D
E
F
G
H
12
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 22-70 22-80 24-2 24-3 24-5
Service Rating A A D D A
Number of Contacts 8 5 3* 7 2 5 16
Contact Size 12 16 8 for #10 or 12 wire 12 12 16 16
Insert Arran g ement 24-6 24-7 24-9 24-10 24-11
Service Rating A, G, H = D; Bal. = A A A A A
Number of Contacts 8 2 14 2 7 3 6
Contact Size 12 12 16 4 8 8 12
Insert Arran g ement 24-12 24-16 24-17 24-19 24-20
Service Rating A A, B, F, G = D; C, D, E = A D A D
Number of Contacts 23 133 23 12 29
Contact Size 4 12 8 12 16 12 16 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
A
B
C
D
E
F
G
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
PSR
AB
C
D
E
FG
H
ABC
D
E
F
G
H
J
KLMN
P
IO
A
B
C
D
E
A
B
C
D
E
FG
AB
C
D
E
AB A
B
CD
E
FG
ABC
DEF
G
H
I
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
FH
J
K
L
M
N
13
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 24-21 24-22 24-27 24-28 24-51
Service Rating D D E Inst. A
Number of Contacts 1 9 4 7 24 5*
Contact Size 8 16 8 16 16 B, E for AN #10 or 12 wire
A, C, D for AN #8 wire
Insert Arran g ement 24-52 24-53 24-58 24-59 24-60
Service Rating Hi-Volt A A A A
Number of Contacts 1 5* 3 3 7 7 7 7*
Contact Size 12 8 8 12 16 12 16 8 for #10 or 12 wire
Insert Arran g ement 24-65 24-66 24-67 24-71 24-75
Service Rating A D Inst. A A
Number of Contacts 11 4 7 19 2* 5* 5 2
Contact Si ze 12 16 12 12 8 8 for #10 or 12 wire 8 8 for #16 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
AB
C
D
E
F
G
H
JK
A
BC
DAB
C
D
E
F
G
ABCD
EFGHJ
KL
M
NPQ
RST
U
V
WXYZ
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
H
J
K
LM
N
P
RA
B
CD
E
F
G
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
A
B
CD
E
F
G
A
B
CD
E
F
G
14
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 24-79 24-80 24-84 24-96 24-AJ
Service Rating A Inst. A Inst. A
Number of Contacts 5 23 1 18 28 25
Contact Size 8 16 12 12 (Coax) RG-188/U 16 16
or RG-174/U
Insert Arrang ement 28-1 28-2 28-3 28-4
Service Rating A, J, E = D; Bal. = A D E G, P, S = E; Bal. = D
Number of Contacts 3 6 2 12 3 2 7
Contact Size 8 1 2 12 16 8 12 16
Insert Arrang ement 28-5 28-6 28-7 28-8
Service Rating D D D L, M = E; B = D; Bal. = A
Number of Contacts 2 1 2 3 2 2 10
Contact Size 4 1216 4 4 1216
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
ABCD
EFGHJ
KLMNPQ
RSTU
V
WX Z
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
ABCD
EFGHJ
KLMNPQ
RS
T
UV
WXZ
Y
a
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
AB
CD
P
S
EFG
A
B
CD
E
A
BC
AB
A
B
C
D
E
F
G
H
J
K
L
M
15
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 28-9 28-10 28-11 28-12
Service Rating D G = D; Bal. = A A A
Number of Contacts 6 6 2 2 3 4 18 26
Contact Size 12 16 4 8 12 12 16 16
Insert Arran g ement 28-13 28-15 28 -16 28-17
Service Rating A A A R = B; M, N, P = D; A to L = A
Number of Contacts 26 35 20 15
Contact Size 16 16 16 16
Insert Arrangement 28-18 28-19 28-20
Service Rating M = C; G, H, J, K,L = D; A, B = A; Bal. = Inst. H, M = B; A, B, = D; Bal. = A A
Number of Contacts 12 4 6 10 4
Contact Size 16 12 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
100° Rota tion
of 32-6
A
B
C
DE
F
G
HJ
K
LM
A
B
CD
E
F
GA
B
C
D
E
F
G
H
J
K
L
MI
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
ST
U
V
W
X
Y
Z
ab
d
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
ST
U
V
W
X
Y
Z
ab
d
AB
CDEFG
HJKLM
PRST
N
W
XYZ
UV
abc
de
f
gh
jk
m
l
ABC
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VNA
BCD
EF
G
HJK
L
M
N
P
R
AB
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
A
B
C
D
E
F
G
H
J
K
L
M
NP
16
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 28-21 28-22 28 -51 28-59
Service Rating A D A A
Number of Contacts 37 3 3 12 7 10
Contact Size 16 4 16 12 12 16
Insert Arran g ement 28-66 28-72 28 -74 28-75
Service Rating A – A A
Number of Contacts 2 14 3 9* 4* 3* 9* 7*
Contact Size 8 12 4 (Coax) RG-59A/U 16 8 8 for #10 wire 16 8 for #10 wire
or RG-62A/U (S, T, R)
Insert Arrang ement 28-79 28-82 28-84 28-AY
Service Rating A D A A
Number of Contacts 7 9 2 4 9 4 5
Contact Size 8 1 6 8 12 8 4 16
* Solderless CONTACT LEGEND 16 12 8 4 0
ABCD
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
A
B
C
DE
F
A
B
C
D
E
F
H
J
K
L
M
NAB C D
EFH
JK
LMN
PR S TU
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T12
3
45
6
A
B
C
DE
F
G
H
I
A
BC
DE F
GH
J
17
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrang ement 32-1 32-2 32-3 32-4
Service Rating A = E; B, C, D, E = D E D F, J, K, N = A:, Bal. = D
Number of Contacts 2 3 3 2 1 2 2 4 2 12
Contact Size 0 12 4 16 0 4 12 16 12 16
Insert Arrang ement 32-5 32-6 32-7
Service Rating D A A, B, h, j = Inst.; Bal. = A
Number of Contacts 2 2 3 2 16 7 28
Contact Size 0 4 8 12 16 12 16
Insert Arrangement 32-8 32-9 32-10
Service Rating A D A, F = E; G = B; B, E = D; C, D = A
Number of Contacts 6 24 2 12 2 2 3
Contact Size 12 16 4 16 4 8 16
A
B
CD
E
ABC
DEF
G
H
J
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
C
D
E
A
B
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
AB
CD E F G
HI J K
LMN
A
B
CD
E
F
G
18
ACA-B
contact arrangements
100° Rotation
of 32-6
Insert Arran gement 32-12 32-13 32-15 32-16
Se r vice Rating C, D, E, F, G = A; Bal. = D D D A
Number of Contacts 5 10 5 18 2 6 2 3 2 16
Contact Size 12 16 12 16 0 12 4 8 12 16
Insert Arran gement 32-17 32-22 32-25 32-31
Service RatingDAAA
Number of Contacts 4 54 25 31
Contact Size 4 1 6 12 16
Insert Arran gement 32-48 32-52 32-53 32-56
Service Rating Inst. D t, u = E; Bal. = Inst. A
Number of Contacts 48 2 6 5 37 24 6
Contact Siz e 16 0 12 12 16 16 12 for #10 wire
90° CW Rotation
of 32-15
CONTACT LEGEND 16 12 8 4 0
front face of pin insert or rear face of socket insert illustrated
AB
CD EFG
HJK
LM
OP
N
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
A
BC
DE
F
G
H
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
A
BC
D
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
AB
CDEFH
JKLMNP
RSTUVWX
YZ
abcd f g
hi jkmn p
qrstuv
wxyzAA
BB CC
90˚ A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
19
ACA-B
contact arrangements
CONTACT LEGEND 16 12 8 4 0
** Consult Amphenol, Sidney, NY for service rating of power contacts.
front face of pin insert or rear face of socket insert illustrated
Insert Arran g ement 32-57 32-58 32-59 32-60
Service Rating ** – A A
Number of Contacts 6 2 4 40 2 15 8
Contact Size 12 0 (Coax) RG-71/U 4 (Coax) RG-161/ U 16 8 (Coax) RG-161/U 16 8 (Coax) RG-124/U
or RG-179/U
Insert Arrangement 32-62 32-64 32-68
Service Rating ** Inst. A
Number of Contacts 2 1 2 16 2 54 12 4
Contact Size 4 8 12 16 8 (Coax) RG-124/U 16 16 4 (Coax) RG-58C/U
Insert Arran g ement 32-73 32-75 32-76 32-79
Service Rating A 8, 9 = D A D
Number of Contacts 46 2 7 19 4 1
Contact Size 16 12 8 (Coax) RG-180B/U 1 2 4 8
A
BC
DE
F
G
H
A
BC
D
ABC
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
WXY
T
U
Z
ab
c
d
f
g
h
i
j
k
m
npq
w
vst
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcdef
ghjk
mnpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
KLM
NP
QR
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
1
2
3
4
5
67
89
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
A
BC
D
E
20
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrang ement 32-82 32-AF 32-AM 36-1
Service Rating A A A D
Number of Contacts 4 12 55 1 4 18
Contact Si ze 4 16 16 4/0 12 16
Insert Arrang ement 36-3 36-4 36-5
Service Rating D A = D; B, C = A A
Number of Contacts 3 3 3 4
Contact Size 0 12 0 0
Insert Arrang ement 36-6 36-7 36-8
Service Rating A A A
Number of Contacts 2 4 7 40 1 46
Contact Size 0 4 12 16 12 16
CONTACT LEGEND 16 12 8 4 0 4/0
.
ABC
DE F G H
IJK LMN
OP R S T
UVW
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
mpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AH
AB
CDE
FG H
J
KLM
NP
QR
A
B
C
D
E
F
A
BC
A
B
C
D
A
B
C
D
E
F
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STUV
WXYZa
bcde
fg hj
k
mnpr
t
u
vw
s
xy
z
21
ACA-B
contact arrangements
Insert Arrangement 36-9 36-10 36-11
Service Rating A A A
Number of Contacts 1 2 14 14 48 48
Contact Size 4 8 12 16 16 16
Insert Arrangement 36-12 36-13 36-14
Service Rating A N, P, Q = E; Bal. = A D
Number of Contacts 48 2 15 5 5 6
Contact Size 16 12 16 8 12 16
Insert Arrangement 36-15 36-16 36- 17
Service Rating M = D; Bal. = A A A
Number of Contacts 35 7 40 7 40
Contact Size 16 12 16 12 16
110° Rotation
of 36-7
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 36-7
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD E FG
HJK LMN
OPQR STU
VWXY Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
100˚
AB
CD EFG
HJK LMN
OPQ RSTU
VWXY Z a b c
defghj k
mnpr
tuv w
s
x
yz
q
100° Rotation
of 36-10
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWX Y Zabc
defg hjk
mnp r
tu vw
s
x
yz
q
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
110° Rota tion
of 36-10
AB
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
TU
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
ws
xy
z
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
ws
xy
z
22
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 36-18 36-20 36- 22
Service Rating A A D
Number of Contacts 1 2 14 14 2 2 30 22
Contact Size 4 8 12 16 8 12 16 12
Insert Arrangement 36-51 36-52 36- 54
Service Rating D A A
Number of Contacts 2 2 52 8 31
Contact Size 0 4 16 8 16
Insert Arrangement 36-55 36-59 36- 60
Service Rating A A A
Number of Contacts 31 8 50 3 40 7
Contact Siz e 16 8 for #6 wir e 16 12 for #10 wire 16 12 for #10 wire
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 36-9
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD EFG
HJK LMN
PRSTUVW
XYZ abc
defg
hj
km
ABC
D
EFHJK
LM N P RS
TUV WXY Z
abcdfghi
jkmn p r
tuvw
sx
yz
q
AA AB AC
AD AE AF AH
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
20
21
22
19
18
A
B
CD
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
23
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 36-64 36-65 36- 71
Service Rating – – A
Number of Contacts 4 4 3 50
Contact Size 0 (Coax) RG-11/U 0 (Coax) RG-59/U, RG-62/U 12 16
RG-12/U, or RG-13/U or RG-71/U
Insert Arrangement 36-73 36-74 36- 75
Service Rating – A A
Number of Contacts 7 43 1 48
Contact Size 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/B 16 for #14 wire
Insert Arrangement 36-76 36-77 36- 78
Service Rating A D A
Number of Contacts 47 7 2 12
Contact Size 16 4 16 8
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
A
B
C
D
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
A
B
C
D
E
F
G
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
12
3
45
67 8
910 1112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
24
ACA-B
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 36-79 36-80 36- 83
Service Rating A A –
Number of Contacts 20 20 7
Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U
Insert Arrangement 36-85 36-97 36- 99
Service Rating M = D; Bal. = A C D
Number of Contacts 35 1 3333
Contact Si ze 16 for #12 wire 4/0 4 8 12 16
Insert Arrangement 36-AF
Service Rating A
Number of Contacts 48
Contact Size 16
CONTACT LEGEND 16 12 8 4 0 4/0
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
1
2
3
4
5
6
7
8
9
10
11
12
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
25
ACA-B
Connector
Classes
26
ACA 3100F-B
wall mount receptacle for front panel mounting
• R eceptacle w ith sol i d backshell and rear accessory threads
• Four through mounting holes or optional metric thre ade d holes
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
–.000
N
+.000
–.006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2 M4
14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 M4
16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2 M4
16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4
18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4
20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 M4
22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2 M4
24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7 M4
28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7 M5
32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3 M5
36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3 M5
R
RS
S
T
THRU HOLE
N
MP
K
F
B
L
T
THREAD
1
27
ACA 3100E-B
wall mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+.016
–.000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 Z
Max. KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .256 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .354 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .433 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .433 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .559 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .622 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .622 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .843 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .843 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 1.051 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.248 2.283 5.315
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread Z
Max. KK
Max. LL
Max.
10SL 60 18.2 18.2 2.8 18.2 25.4 3.2 M4 6.5 22.7 120
14S 62 18.2 24.6 3.2 23.0 30.0 3.2 M4 9.0 27.5 120
16S 70 18.2 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 120
16 70 21.5 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 125
18 77 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.2 33.0 125
20 77 23.0 34.2 4.0 29.4 38.0 3.2 M4 15.8 37.5 125
22 77 23.0 37.4 4.0 31.8 41.0 3.2 M4 15.8 37.5 125
24 85 23.0 40.9 4.0 34.9 44.5 3.7 M4 21.4 43.3 125
28 85 24.1 46.7 4.0 39.7 50.8 3.7 M5 21.4 43.3 125
32 85 24.1 53.4 4.0 44.5 57.0 4.3 M5 26.7 51.7 125
36 105 24.1 59.6 4.0 49.2 63.5 4.3 M5 31.7 58.0 135
• R eceptacle w ith cable clamp an d te le scopic bushing
• In clude s gr om m et and gr om m et sleeve
• Four through mounting holes or optional metric thre ade d holes
R
RS
S
T
A
LL
L
MP
T1
THREAD
THRU HOLE
ZK
K
28
ACA 3100G-B
wall mount receptacle for front panel mounting
• Receptacle with endbell for heat shrink termin ation
• D oe s not include gr ommet and gro mmet sleeve
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 18.2 25.4 3.2 M4 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 3.2 M4 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 29.4 38.0 3.2 M4 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 31.8 41.0 3.2 M4 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 34.9 44.5 3.7 M4 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 39.7 50.8 3.7 M5 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 44.5 57.0 4.3 M5 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 49.2 63.5 4.3 M5 38.5 43.6 47.8 54.8
R
RS
S
T
THRU HOLE
N
L
MP
KKJJBBZ
J
K
T
THREAD
1
29
ACA 3100R-B
wall mount receptacle for front panel mounting
• R eceptacle w ith short endbel l for ind iv id ual w ire se al i ng
• In clude s gr om m et and gr om m et sleeve
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread KK
Max.
10SL 48.0 18.2 18.2 2.8 18.2 25.4 3.2 M4 20.0
14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 M4 24.0
16S 48.0 18.2 27.4 3.2 24.6 32.5 3.2 M4 26.0
16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 M4 26.0
18 57.0 23.0 30.8 4.0 27.0 35.0 3.2 M4 29.5
20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 M4 33.0
22 57.0 23.0 37.4 4.0 31.8 41.0 3.2 M4 36.0
24 57.0 23.0 40.9 4.0 34.9 44.5 3.7 M4 40.0
28 57.0 24.1 46.7 4.0 39.7 50.8 3.7 M5 46.0
32 60.0 24.1 53.4 4.0 44.5 57.0 4.3 M5 51.5
36 60.0 24.1 59.6 4.0 49.2 63.5 4.3 M5 58.0
R
RS
S
N
MP
L
K
K
T
1
THREAD
T
THRU HOLE
30
ACA 3101F-B
inline receptacle
• R eceptacle w ith sol i d backshell and rear accessory threads
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 . 846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
N
MP
L
F
K
B
Q
S
31
ACA 3101E-B
inline receptacle
All dimensions for reference only.
Inches
Shell
Size B
Max. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
Max. S
Max. KK
Max. LL
Max.
10SL .256 2.362 .717 .717 .110 .886 .992 .894 4.720
14S .354 2.440 .717 .969 .126 1.161 1.173 1.083 4.720
16S .433 2.756 .717 1.079 .126 1.240 1.272 1.181 4.720
16 .433 2.756 .846 1.079 .126 1.240 1.272 1.181 4.921
18 .559 3.031 .907 1.213 .157 1.358 1.370 1.300 4.921
20 .622 3.031 .907 1.346 .157 1.476 1.488 1.476 4.921
22 .622 3.031 .907 1.472 .157 1.594 1.618 1.476 4.921
24 .843 3.346 .907 1.610 .157 1.752 1.756 1.705 4.921
28 .843 3.346 .947 1.839 .157 1.969 2.004 1.705 4.921
32 1.051 3.346 .947 2.102 .157 2.224 2.248 2.035 4.921
36 1.248 4.134 .947 2.346 .157 2.480 2.504 2.283 5.315
Millimeters
Shell
Size B
Max. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
Max. S
Max. KK
Max. LL
Max.
10SL 6.5 60 18.2 18.2 2.8 22.5 25.2 22.7 120
14S 9.0 62 18.2 24.6 3.2 29.5 29.8 27.5 120
16S 11.0 70 18.2 27.4 3.2 31.5 32.3 30.0 120
16 11.0 70 21.5 27.4 3.2 31.5 32.3 30.0 125
18 14.2 77 23.0 30.8 4.0 34.5 34.8 33.0 125
20 15.8 77 23.0 34.2 4.0 37.5 37.8 37.5 125
22 15.8 77 23.0 37.4 4.0 40.5 41.1 37.5 125
24 21.4 85 23.0 40.9 4.0 44.5 44.6 43.3 125
28 21.4 85 24.1 46.7 4.0 50.0 50.9 43.3 125
32 26.7 85 24.1 53.4 4.0 56.5 57.1 51.7 125
36 31.7 105 24.1 59.6 4.0 63.0 63.6 58.0 135
• R eceptacle w ith cable clamp an d te le scopic bushing
• In clude s gr om m et and gr om m et sleeve
N
MP
Q
SLL
L
BK
K
32
ACA 3101G-B
inline receptacle
• Receptacle with backshell for heat shrink termination
• D oe s not include gr ommet and gro mmet sleeve
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
Max. S
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .886 .992 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 1.161 1.173 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 1.240 1.272 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 1.240 1.272 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.358 1.370 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.476 1.488 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.594 1.618 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.752 1.756 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.969 2.004 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 2.224 2.248 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 2.480 2.504 1.516 1.717 1.882 2.157
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
Max. S
Max. Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 22.5 25.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 29.5 29.8 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 31.5 32.3 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 31.5 32.3 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 34.5 34.8 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 37.5 37.8 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 40.5 41.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 44.5 44.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 50.0 50.9 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 56.5 57.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 63.0 63.6 38.5 43.6 47.8 54.8
N
MP
Q
SL
K
K
K
BBZJJ
J
33
ACA 3101R-B
inline receptacle
• R eceptacle w ith short endbel l for ind iv id ual w ire se al i ng
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
Max. S
Max. KK
Max.
10SL 1.890 .717 .717 .110 .886 .992 .787
14S 1.890 .717 .969 .126 1.161 1.173 .945
16S 1.890 .717 1.079 .126 1.240 1.272 1.024
16 2.205 .846 1.079 .126 1.240 1.272 1.024
18 2.244 .907 1.213 .157 1.358 1.370 1.161
20 2.244 .907 1.346 .157 1.476 1.488 1.299
22 2.244 .907 1.472 .157 1.594 1.618 1.417
24 2.244 .907 1.610 .157 1.752 1.756 1.575
28 2.244 .947 1.839 .157 1.969 2.004 1.811
32 2.362 .947 2.102 .157 2.224 2.248 2.028
36 2.362 .947 2.346 .157 2.480 2.504 2.283
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
Max. S
Max. KK
Max.
10SL 48.0 18.2 18.2 2.8 22.5 25.2 20.0
14S 48.0 18.2 24.6 3.2 29.5 29.8 24.0
16S 48.0 18.2 27.4 3.2 31.5 32.3 26.0
16 56.0 21.5 27.4 3.2 31.5 32.3 26.0
18 57.0 23.0 30.8 4.0 34.5 34.8 29.5
20 57.0 23.0 34.2 4.0 37.5 37.8 33.0
22 57.0 23.0 37.4 4.0 40.5 41.1 36.0
24 57.0 23.0 40.9 4.0 44.5 44.6 40.0
28 57.0 24.1 46.7 4.0 50.0 50.9 46.0
32 60.0 24.1 53.4 4.0 56.5 57.1 51.5
36 60.0 24.1 59.6 4.0 63.0 63.6 58.0
N
MP
Q
S
KK
L
34
ACA 3102E-B
box mount receptacle for front panel mounting
• Receptacle witho ut thr ead s fo r pan el mounting
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size L
±.012
M
+.016
–.000
N
+.000
–.006 P
±.008 R
±.004 S
±.012
T
Thru Hole
+.004
–.000 KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
Thru Hole
+0.1
–0.0
T1
Metric
Thread KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 M4 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 M4 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 M4 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 M4 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 M4 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 M4 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 M4 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 M4 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 M5 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 M5 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 M5 52.4
R
RS
S
N
MP
KK
L
82º
T
T1
THREAD
T
THRU HOLE
35
ACA 3103F-B
wall mounting receptacle for rear panel mounting
• Recep t acle with backshell and rea r accessory t hreads
• In cl udes wire seali ng gr om m et and gromme t sleeve for indiv id ual wi res
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
–.000
N
+ .000
–.006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2 M4
14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 M4
16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2 M4
16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4
18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4
20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 M4
22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2 M4
24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7 M4
28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7 M5
32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3 M5
36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3 M5
R
RS
S
T
THRU HOLE
N
MP
K
F
B
L
T
THREAD
1
36
ACA 3103E-B
wall mount receptacle f or rear panel mounting
• R eceptacle w ith cable clamp an d te le scopic bushing
• In clude s gr om m et and gr om m et sleeve
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+.016
–.000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 Z
Max. KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .256 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .354 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .433 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .433 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .559 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .622 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .622 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .843 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .843 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 1.051 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.248 2.283 5.315
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread Z
Max. KK
Max. LL
Max.
10SL 60 18.2 18.2 2.8 18.2 25.4 3.2 M4 6.5 22.7 120
14S 62 18.2 24.6 3.2 23.0 30.0 3.2 M4 9.0 27.5 120
16S 70 18.2 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 120
16 70 21.5 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 125
18 77 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.2 33.0 125
20 77 23.0 34.2 4.0 29.4 38.0 3.2 M4 15.8 37.5 125
22 77 23.0 37.4 4.0 31.8 41.0 3.2 M4 15.8 37.5 125
24 85 23.0 40.9 4.0 34.9 44.5 3.7 M4 21.4 43.3 125
28 85 24.1 46.7 4.0 39.7 50.8 3.7 M5 21.4 43.3 125
32 85 24.1 53.4 4.0 44.5 57.0 4.3 M5 26.7 51.7 125
36 105 24.1 59.6 4.0 49.2 63.5 4.3 M5 31.7 58.0 135
R
RS
S
T
A
LL
L
MP
T1
THREAD
THRU HOLE
ZK
K
37
ACA 3103G-B
wall mount receptacle f or rear panel mounting
• Receptacle with endbell for heat shrink termin ation
• D oe s not include gr ommet and gro mmet sleeve
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 18.2 25.4 3.2 M4 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 3.2 M4 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 29.4 38.0 3.2 M4 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 31.8 41.0 3.2 M4 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 34.9 44.5 3.7 M4 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 39.7 50.8 3.7 M5 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 44.5 57.0 4.3 M5 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 49.2 63.5 4.3 M5 38.5 43.6 47.8 54.8
R
RS
S
T
THRU HOLE
N
L
MP
KKJJBBZ
J
K
T
THREAD
1
38
ACA 3103R-B
wall mount receptacle f or rear panel mounting
• R eceptacle w ith short endbel l for ind iv id ual w ire se al i ng
• In clude s gr om m et and gr om m et sleeve
• Four through mounting holes or optional metric thre ade d holes
All dimensions for reference only.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
Thru Hole
+ .004
– .000 KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread KK
Max.
10SL 48.0 18.2 18.2 2.8 18.2 25.4 3.2 M4 20.0
14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 M4 24.0
16S 48.0 18.2 27.4 3.2 24.6 32.5 3.2 M4 26.0
16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 M4 26.0
18 57.0 23.0 30.8 4.0 27.0 35.0 3.2 M4 29.5
20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 M4 33.0
22 57.0 23.0 37.4 4.0 31.8 41.0 3.2 M4 36.0
24 57.0 23.0 40.9 4.0 34.9 44.5 3.7 M4 40.0
28 57.0 24.1 46.7 4.0 39.7 50.8 3.7 M5 46.0
32 60.0 24.1 53.4 4.0 44.5 57.0 4.3 M5 51.5
36 60.0 24.1 59.6 4.0 49.2 63.5 4.3 M5 58.0
R
RS
S
N
MP
L
K
K
T
1
THREAD
T
THRU HOLE
39
ACA 3106F-B
straight plug
• P l ug wi th backshe ll and rear accessory thr eads
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max. Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
Millimeters
Shell
Size F
Min. K
Min. L
Max. Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
Q
B
F
K
L
40
ACA 3106E-B
straight plug
• Plug with cable clam p and teles copic bushing
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 2.165 .898 .256 .894 4.528
14S 2.362 1.150 .354 1.083 4.528
16S 2.362 1.260 .433 1.181 4.528
16 2.756 1.260 .433 1.181 4.724
18 2.756 1.437 .559 1.268 4.724
20 2.953 1.571 .622 1.476 4.724
22 2.953 1.697 .622 1.476 4.724
24 3.543 1.835 .843 1.705 4.724
28 3.543 2.102 .843 1.705 4.724
32 3.543 2.366 1.051 2.035 4.724
36 3.937 2.610 1.248 2.283 5.118
Millimeters
Shell
Size L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 55 22.8 6.5 22.7 115
14S 60 29.2 9.0 27.5 115
16S 60 32.0 11.0 30.0 115
16 70 32.0 11.0 30.0 120
18 70 36.5 14.2 32.2 120
20 75 39.9 15.8 37.5 120
22 75 43.1 15.8 37.5 120
24 90 46.6 21.4 43.3 120
28 90 53.4 21.4 43.3 120
32 90 60.1 26.7 51.7 120
36 100 66.3 31.7 58.0 130
L
LL
ZK
K
Q
41
ACA 3106G-B
straight plug
• Plug with back shell for heat shrink terminati on
• D oe s not include gr ommet and gro mmet sleeve
All dimensions for reference only.
Inches
Shell
Size J
± .008 K
± .020 L
Max. Q
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .898 .303 .524 .610 .669
14S .138 .461 1.969 1.150 .417 .669 .752 .791
16S .138 .461 1.969 1.260 .531 .862 .941 .925
16 .138 .453 2.362 1.260 .531 .862 .941 .925
18 .138 .453 2.362 1.437 .575 .862 .941 1.043
20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189
22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323
24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421
28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630
32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913
36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max. Q
Max. Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 32.0 13.5 21.9 23.9 23.5
16 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5
18 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5
20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2
22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4
32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8
Q
BB JJ KKZ
J
K
L
42
ACA 3106R-B
straight plug
• Plug with short en dbe ll for individual wire sealing
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size L
Max. Q
Max. KK
Max.
10SL 1.417 .898 .787
14S 1.437 1.150 .945
16S 1.437 1.260 1.024
16 1.929 1.260 1.024
18 1.929 1.437 1.161
20 1.969 1.571 1.299
22 1.969 1.697 1.417
24 2.008 1.835 1.543
28 2.008 2.102 1.811
32 2.087 2.366 2.028
36 2.106 2.610 2.283
Millimeters
Shell
Size L
Max. Q
Max. KK
Max.
10SL 36.0 22.8 20.0
14S 36.5 29.2 24.0
16S 36.5 32.0 26.0
16 49.0 32.0 26.0
18 49.0 36.5 29.5
20 50.0 39.9 33.0
22 50.0 43.1 36.0
24 51.0 46.6 40.0
28 51.0 53.4 46.0
32 53.0 60.1 51.5
36 53.5 66.3 58.0
K
K
QL
43
ACA 3107A-B
jam nut receptacle
• For rear pa nel single hole mo unt ing
• P anel seal O- ri ng in cl uded
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A G
± .012
J
Wall Thickness M
± .012
N
+ .000
– .006 P
± .007 R
± .016 S
± .012Min. Max.
10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 1.252
14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626
16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748
16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748
18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.875
20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000
22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.134
24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252
28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500
32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748
36 2.5000-16 UN 1.059 .094 .32 7 1.386 2.346 .220 2.812 3.000
Millimeters
Shell
Size G
± 0.3
J
Wall Thickness M
± 0.3
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.4 S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2
G
S
S
G
R
N
M
P
BO-Ring
J
44
ACA 3108F-B
90° angle plug
• 90° plug for an gle d at ta chment to pa nel s w i th rea r ac cessory threads
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
Millimeters
Shell
Size F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
Q
K
J
L
F
B
45
ACA 3108E-B
90° angle plug
• 90 ° plug for an gled at tachm ent to panels with cable clamp and t eles copic bushing
• In clude s gr om m et and gr om m et sleeve
All dimensions for reference only.
Inches
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 1.654 1.772 .898 .220 .894 3.937
14S 1.654 1.850 1.150 .312 1.083 3.937
16S 1.772 1.890 1.299 .437 1.181 3.937
16 1.772 2.244 1.299 .437 1.181 3.937
18 2.087 2.283 1.437 .562 1.299 3.937
20 2.087 2.402 1.571 .625 1.476 3.937
22 2.087 2.402 1.697 .625 1.476 3.937
24 2.283 2.598 1.835 .750 1.705 3.937
28 2.283 2.598 2.102 .750 1.705 3.937
32 2.598 2.835 2.366 .937 2.061 4.331
36 2.717 2.953 2.610 1.250 2.283 4.331
Millimeters
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 42 45 22.8 5.58 22.7 100
14S 42 47 29.2 7.92 27.5 100
16S 45 48 33.0 11.09 30.0 100
16 45 57 33.0 11.09 30.0 100
18 53 58 36.5 14.27 33.0 100
20 53 61 39.9 15.87 37.5 100
22 53 61 43.1 15.87 37.5 100
24 58 66 46.6 19.05 43.3 100
28 58 66 53.4 19.05 43.3 100
32 66 72 60.1 23.79 51.7 110
36 69 75 66.3 31.75 58.0 110
Q
L
ZKK
K
LL
46
ACA-B Connectors – accessories
10-40450, 10-36675, 10-580649 sealing gaskets
PLAIN FLAT GASKET
The Amphenol® plain flat gasket of synthetic rubber material
is provided to take complete advantage of waterproof and
pressure sealing features. It is for use with the flange
mounted receptacle.
SHIELD IN G GASKET
This flat gasket is provided to give the maximum in connector
performance. Its s pecial feature is in providing the m aximum
radio shielding under difficult conditions of high receiver sen-
sitivity and low signal strength while retaining the sealing
characteristics of the plain gas ket . This gas ket is for use w ith
the flange mounting receptacle.
LOW TEMPERATURE GASKET
This gasket is provided for applications where the major
requirement is resistance to the injurious effects of extremely
low temperature. Even at temperatures as low as –67°F this
gasket retains its resiliency and will seal a pressure differen-
tial of 30 psi.
Additional versions of gaskets are available including low
smoke zero halogen, and also high tem perature and conduc -
tive types. Consult Amphenol lndustrial Operations, Sidney
NY, for further information.
Installa tio n Dimen sions
MS
Shell
Size A
±.010
Front Panel
Versions
B
+.016
– .000
Rear Panel
Version
B
+.016
– .000
C
+.016
– .000 D
±.010
10SL .719 .625 .724 1.000 .172
14S .906 .875 .976 1.188 .172
16S .969 1.000 1.087 1.281 .172
16 .969 1.000 1.087 1.281 .172
18 1.063 1.125 1.220 1.375 .203
20 1.156 1.250 1.354 1.500 .203
22 1.250 1.375 1.480 1.625 .203
24 1.375 1.500 1.618 1.750 .203
28 1.563 1.750 1.846 2.000 .203
32 1.750 2.000 2.110 2.250 .219
36 1.938 2.188 2.354 2.500 .219
Installa tio n Dimen sions
MS
Shell
Size A
±0.2
Front Panel
Versions
B
+0.4
–0.0
Rear Panel
Version
B
+0.4
–0.0
C
+0.4
–0.0 D
±0.2
10SL 18.2 15.9 18.4 25.4 4.36
14S 23.0 22.2 24.8 30.2 4.36
16S 24.6 25.4 27.6 32.5 4.36
16 24.6 25.4 27.6 32.5 4.36
18 27.0 28.57 31.0 35.0 5.15
20 29.4 31.75 34.4 38.1 5.15
22 31.8 34.9 37.6 41.2 5.15
24 34.9 38.1 41.1 44.5 5.15
28 39.7 44.45 46.9 50.8 5.15
32 44.5 50.8 53.6 57.2 5.56
36 49.2 55.57 59.8 63.5 5.56
Order Data for
Front Panel Mount Gaskets
Front P anel
Plain Version Front P ane l
Shielding Version
Front Panel
Low Temperatur e
Version
Front Panel
Low Smoke ZH
Version
10-40450-10 10-40450-10S 10-36675-10 LS-40450-10
10-40450-14 10-40450-14S 10-36675-14 LS-40450-14
10-40450-16 10-40450-16S 10-36675-16 LS-40450-16
10-40450-18 10-40450-18S 10-36675-18 LS-40450-18
10-40450-20 10-40450-20S 10-36675-20 LS-40450-20
10-40450-22 10-40450-22S 10-36675-22 LS-40450-22
10-40450-24 10-40450-24S 10-36675-24 LS-40450-24
10-40450-28 10-40450-28S 10-36675-28 LS-40450-28
10-40450-32 10-40450-32S 10-36675-32 LS-40450-32
10-40450-36 10-40450-36S 10-36675-36 LS-40450-36
10-40450-40 10-40450-40S 10-36675-40 LS-40450-40
Order Data for
Rear Panel Mount Gaskets
Rear Panel
Plain Version
Rear Panel
Low Smoke ZH
Version
10-580649-11 LS-580649-11
10-580649-14 LS-580649-14
10-580649-16 LS-580649-16
10-580649-18 LS-580649-18
10-580649-20 LS-580649-20
10-580649-22 LS-580649-22
10-580649-24 LS-580649-24
10-580649-28 LS-580649-28
10-580649-32 LS-580649-32
10-580649-36 LS-580649-36
10-580649-40 LS-580649-40
C
A
C
A
BD
4 HOLES
.031± .010
.08 ± 0.3 mm
.020 ± .004
0.5 ± 0.1 mm
SHIELDING
.031 ± .010
0.8 ± 0.3 mm
LOW
TEMPERATURE
47
ACA-B Connectors – accessories
recept acle prot ect i on cap s
• P r ote ct iv e m et al caps which seal th e fr ont of receptacle s
• In cl udes a chain for re te ntio n of the cap at the requ ired locatio n
• For all ACA( )-B receptacles
* To complete order number, add shell size and suffix number. For
example, shell size 11 with olive drab cadmium plate would be
10-580902-113.
All dimensions for reference only.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
10SL .173 .700 .905 5.000
14S .173 .700 1.181 5.000
16 .173 .700 1.280 5.000
17 .173 .900 1.280 5.000
18 .173 .900 1.457 5.000
20 .173 .900 1.594 5.000
22 .173 .900 1.713 5.000
24 .173 .900 1.850 5.000
28 .220 .900 2.126 7.480
32 .261 .900 2.382 7.480
36 .261 .900 2.638 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
10SL 4.4 17.8 23.0 127
14S 4.4 17.8 30.0 127
16 4.4 17.8 32.5 127
17 4.4 22.9 32.5 127
18 4.4 22.9 37.0 127
20 4.4 22.9 40.5 127
22 4.4 22.9 43.5 127
24 4.4 22.9 47.0 127
28 5.6 22.9 54.0 190
32 5.6 22.9 60.5 190
36 5.6 22.9 67.0 175
Finish Suffix
Olive drab cadmium plate -XX3
Electroless nickel -XXG
Black zinc cobalt -XXY
D
LL
L
N
* 10-580902-XXX
48
ACA-B Connectors – accessories
plug protection caps
• P r ote ct ive m et al caps which seal th e fr ont of plugs
• In cl udes a chain for re te ntio n of the cap at the required loc at io n
• For all ACA( )-B plugs
* To complete order number, add shell size and suffix number. For
example, shell size 11 with olive drab cadmium plate would be
10-580903-113.
All dimensions for reference only.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
10SL .157 .945 .807 5.000
14S .157 .945 1.059 5.000
16 .157 .945 1.169 5.000
17 .157 .945 1.169 5.000
18 .157 .945 1.303 5.000
20 .189 1.260 1.437 5.520
22 .189 1.260 1.563 5.520
24 .189 1.260 1.701 5.520
28 .220 1.260 1.929 7.480
32 .261 1.260 2.193 7.480
36 .261 1.260 2.437 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
10SL 4.0 24 20.5 127
14S 4.0 24 26.9 127
16 4.0 24 29.7 127
17 4.0 24 29.7 127
18 4.0 24 33.1 127
20 4.8 32 36.5 140
22 4.8 32 39.7 140
24 4.8 32 43.2 140
28 4.8 32 49.0 190
32 5.6 32 55.7 190
36 5.6 32 61.9 190
Finish Suffix
Olive drab cadmium plate -XX3
Electroless nickel -XXG
Black zinc cobalt -XXY
D
LL
N
L* 10-580903-XXX
49
ACA-B Connectors – accessories
rear mounting data, panel cut-out dimensions,
sealing plu g s, sea lin g ra ng e s
REAR MOUNTING DATA
MAXIMUM PANEL THICKNESS
Size
Dimension D
GT00/020 GT030
Inches (mm) Inches (mm)
10SL .146 3.70 .303 7.70
14S .146 3.70 .303 7.70
16S .146 3.70 .303 7.70
16 .145 3.70 .242 6.15
18 .145 3.70 .303 7.70
20 .145 3.70 .303 7.70
22 .145 3.70 .303 7.70
24 .207 5.25 .303 7.70
28 .207 5.25 .343 8.70
32 .241 6.10 .309 7.85
36 .241 6.10 .309 7.85 PANEL CUT-OUT DIMENSIONS
Shell
Size
A Dia.
Hole
Size
Connector Styles
02, 020,
00, 030
Front
Mount
02, 00,
020
Rear
Mount
030 Jam Nut
070 Jam Nut
070
B ±.004 C Dia. C Dia. D Dia. E
10SL .126 .717 11/16 1 3/4 7 /8 .83
14S .126 .906 13/16 1 1 1/8 1.08
16S/16 .126 .969 15/16 1 1/8 1 1/1 4 1.21
18 .126 1.063 1 1/16 1 1/4 1 3/8 1.32
20 .126 1.157 1 3/16 1 3/8 1 1/2 1.45
22 .126 1.252 1 5/16 1 1/2 1 5/8 1.57
24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70
28 .146 1.563 1 11/16 1 7/8 2 1.95
32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20
36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45
SEALING PLUG
10-405996-XX
Sealing plugs are used
to fill unused holes in
multi-holed grommet
configurations.
GROMMET HOLE
SEALING RANGES
Hole
Size
Sealing Ran ge
(mm) Inches
16 1.62 – 3.3 .064 – .130
12 2.89 – 4.31 .114 – .170
8 4.16 – 6.47 .164 – .255
4 6.9 – 9.3 .272 – .370
0 10.5 – 13 .97 .4 15 – .550
** ± .020 (in.) *** ± 0.5 (mm)
Order No. Contact
Size Wire
Size Color
Code
Inches
A Dia.
±.010 B
±.005 C
±.010
10-405996-16 16 20-16 Blue .083 .133 .564**
10-405996-12 12 14-12 Yellow .121 .171 .564**
10-405996-8 8 10-8 Red .185 .315 .470
10-405996-4 4 4-6 Blue .310 .415 .470
10-405996-0 0 0-2 Yellow .440 .605 1.000
Millimeters
A Dia.
± 0.2 B
± 0.1 C
± 0.2
2.1 3.4 14.3***
3.1 4.3 14.3***
4.7 8.0 11.9
7.9 10.5 11.9
11.2 15.4 25.4
All dimensions for reference only.
D MAX.
B
TYP.
C DIA.
A DIA.
E
TYP.
D
DIA.
B
DIA.
A
DIA.
45O
C
.135
3.4 + 0.8
– 0.6 mm
+.030
–.025 in.
50
ACA-B Connectors – accessories
crimp contacts and application too ls
Contacts for ACA-B connectors are machined from copper alloys and silver plated for maximum corrosion
resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket
contacts are of the closed entry design.
CRIMP CONTACTS
CRIMP CONTACT DATA APPLICATION TOOLS
PART NUMBER
MATING
SIZE WIRE
WELL Crimp Tools Positioner/
Die Set Locator/
Color
PIN CONTACT SOCKET CONTACT
SILVER GOLD(“D”) SILVER GOLD(“D”)
10-40553 10-597160-15D 10-597109-161 10-597109-16D
16S
16-18-20
Daniels AF8 or
Equivalent TH29- 1 or
Equivalent
Red
10-606014-40 10-597160-40D 10-597109-401 10-597109-40D 12-14
10-606014-221 10-597160-19D 10-597109-191 10-597109-19D 14-16
10-606014-291 10-597160-34D 10-597109-341 10-597109-34D 20-22
10-606014-46 10-597160-46D 10-597109-461 10-597109-46D 20-24
10-40557 10-597160-16D 10-597109-171 10-597109-17D
16
16-18-20
Pin - Blue
Socket - Green
10-606014-022 10-597160-22D 10-597109-221 10-597109-22D 12-14
10-606014-171 10-597160-17D 10-597109-141 10-597109-14D 14-16
10-606014-311 10-597160-33D 10-597109-331 10-597109-33D 20-22
10-606014-361 10-597160-36D 10-597109-361 10-597109-36D 20-24
10-606014-121 10-597160-12D 10-597109-131 10-597109-13D
12
12-14
Green
10-606014-231 10-597160-23D 10-597109-231 10-597109-23D 8-10
10-606014-251 10-597160-26D 10-597109-261 10-597109-26D 10-12
10-606014-271 10-597160-27D 10-597109-271 10-597109-27D 14-16-18
10-606014-261 10-597160-24D 10-597109-241 10-597109-24D 18-20
10-606014-201 10-597160-20D 10-597109-201 10-597109-20D 20-22
10-40792 10-597160-8D 10-40793 10-597109-8D
8
8
Pico 400BHD
Pico 414DA-8N Pico
Pin - 4025
Socket - 4026
10-606014-41 10-597160-41D 10-597109-411 10-597109-41D 6
10-606014-321 10-597160-28D 10-606015-321 10-597109-28D 10-12
10-606014-381 10-597160-38D 10-597109-381 10-597109-38D 12-14
10-40564 10-597160-4D 10-40565 10-597109-4D
4
4
Pico 414DA-4N Pico 4043
10-606014-58 10-597160-58D 10-597109-581 10-597109-58D 6
10-606014-331 10-597160-35D 10-597109-351 10-597109-35D 8
10-606014-44 10-597160-44D 10-606015-441 10-597109-44D 10
10-581806-000 10-597160-1D 10-581808-000 10-597159-1D
0
0
Pico 414DA-0N Pico
Pin - 4042-1
Socket - 4042
10-606014-341 10-597160-29D 10-597109-291 10-597109-29D 0-2
10-606014-351 10-597160-30D 10-606015-351 10-597109-30D 4
10-597276-48 10-597276-48D 10-606015-48 10-597109-48D 2/0 2/0 Pico 500 Pico 514DA2/0N Pico
Pin - 6490
10-597276-47 10-597276-47D 10-606015-47 10-597109-47D 4/0 4/0 Pi co 514DA4/0N Socket - 6491
See page 52 for further contact information applicable to both crimp and solder contacts.
Additional contact va riations including thermocouple and RADSO K® power contacts are available; consult
Amphenol Industrial, Sidney, NY for information.
51
ACA-B Connectors – accessories
application tools
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for
use. There is a possibility of additional crimping tools other than those included
being available at present or in the future for this specific application.
Compl ete inst ructions for provi ding rel iable crimpe d wire to co ntact te rmina tions
and inserting proprietary crimp contacts in ACA-B series connectors are avail-
able in publication L-757.
TOOLING CHART
*Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
**For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
†Tools used with Arbor press 11-7364
Contact
Size Contact
Style Insertion
Tool Removal
Tool
16 Pin & Socket 11-7345 11-8250 Kit
12 Pin & Socket 11-7082 11-8250 Kit
8 Pin & Socket 11-8220 11-8250 Kit
4Pin & Socket 11-7365-4†Pin 11-7370-4†
Socket 11 -7 674 - 2†
0Pin & Socket 11-7365-5†Pin 11-7370-5†
Socket 11-7674-3†
52
ACA-B Connectors – accessories
solder contacts
Machin ed cop per allo y conta cts in a full ran ge of sizes , with closed en try soc ket des ign in th e
size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder con-
tacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt
drop. (See how to order, Connector Modi fication, page 53).
Part Number Pin/
Socket Mating End
Size Wire Barrel
Size Allowable
Wire Size Test Current**
Amps
10-040569-000
10-597107-171
Pin
Socket 16 Short†16
16
18
20
22
13
10
7.5
5
10-040599-000
10-597107-171
Pin
Socket 16 Long 16
16
18
20
22
13
10
7.5
5
10-033646-000
10-597107-131
Pin
Socket 12 12 12
14 23
17
10-035531-000
10-035532-000
Pin
Socket 88 8
10 46
33
10-035529-000
10-035530-000
Pin
Socket 44 4
680
60
10-035527-000
10-035528-000
Pin
Socket 00 0
1
2
150
125
100
** Contact ratings as stated are test ratings only. The connector may not withstand full
rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors. This is left entirely in the
designer’s hands as he c an best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
Table I
MIL-SPEC CONTACT ARRANGEMENT
SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* Th e values li sted in Tabl e I represe nt oper atin g values
which inc lude a gener ous sa fety fa ctor. I t may be ne c-
essary for some applications to exceed the operating
voltages listed h ere. I f thi s is nec essary, des igners w ill
find Ta ble I I use ful fo r determin i ng the deg ree to which
the recommended values of Table I can be exceeded.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
† Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own oper-
ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran-
sients, surges, etc.
MS
Service
Rating
Nominal
Distance Standard Sea
Level Conditions Pressure Altitude †
50,000 Feet Pressure Altitude †
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
† The 10SL, 14S and 16S connectors
require short contacts.
53
Amphenol ACA-B Connectors
how to order, connector intermateability
Part Number System
(example part number shown)
ACA 3100 E 10SL-3 P W B (F80)
1 23 4 5678
1. Connector Seri es
ACA designat es Amp henol® ACA-B Reverse Bayonet Serie s
2. Shell Style
3100 - Wall mount receptacle for front panel mounting
3101 - Cable connecting receptacle
3102 - Box mount receptacle (Class E only, see sect. 3)
3103 - Wall mount receptacle for rear panel mounting
3106 - Straight plug
3107 - Jam nut receptacle - rear panel mount
(Cla ss A onl y, see sect. 3)
3108 - 90° angle plug
3. Connector Class
A Environmental, no rear threads (Applies to 3107 only)
E Environmental resisting, with grommet seal and
strain relief backshell
F Environmental resisting, with grommet seal and
solid backshell with r ear accessor y threads
G Bac kshell for heat shrink termination
R Environmental resisting with lightweight endbell
4. Shell Size and Insert Arrangement
See pages 2-4 for insert availability charts, and pages 6-24
for insert pattern drawings.
5. Contact Style
P designates pin contact s
S designates socket contacts
Note: s tandard co ntacts are si lver plate d. Consult Connect or
Modification for ordering gold plated contacts.
6. A lternate Posit ion
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Designation for Reverse Bayonet
B designates Reverse Bayonet coupling shells
8. Connector Modification
Omit for standard olive drab connectors with solder type sil-
ver plated contacts.
For a modification as listed below, add suffix in parenthesis
to the end of the part number. Consult Amphenol Industrial
Operations for further description or assistance.
(RDS ) with Radsock contacts
(F80) with AWG crimp contacts
(FO) less contacts. (contacts are to be ordered
separately)
(A176) gold contacts
(T00) metric threads in flange holes
(RFI) grounded - plug only
(F42) less grommet and backshell
(F85) less sleeve and grommet
(A23 ) electroless nickel plating
(A232) with black zinc cobalt plating
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
This catal og is on the Amp henol website:
www.amphenol-industrial.com.
See www.amphenol-industrial.com and
www.amphenol-aerospace.com
for the broad range of interconnection products offered by
Amphenol.
Connector Style Mateable with Style
ACA3100 ACA 3106, 3108
ACA3101 ACA 3106, 3108
ACA3102 ACA 3106, 3108
ACA3103 ACA 3106, 3108
ACA3106 ACA 3100, 3101, 3102, 3103, 3107
ACA3107 ACA 3106, 3108
ACA3108 ACA 3100, 3101, 3102, 3103, 3107
®
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone:607-563-5011
1-800-678-0141
Fax: 607-563-5157
Web: www.amphenol-aerospace.com
Web: www.amphenol-industrial.com
SALES OFFICES
Amphenol Corporation
Amphenol Aerospace
Amphenol Indu str ia l Operat io ns
23276 South Pointe Drive
Suite 113
Laguna Hills, CA 92653
Phone:949-855-4454
1-800-678-0141
Fax: 949-855-9115
Amphenol Corporation
Amphenol Aerospace
Amphenol Indu str ia l Operat io ns
2010 Corporate Ridge
McLean, VA 22101
Phone:1-800-678-0141
Amphenol Indu str ia l Operat io ns
Amphenol Power Solutions
34190 Riviera Drive
Fraser, MI 48026
Phone: 586 -29 4- 740 0
Fax: 586-294-7402
www.radsok.com
Amphenol Pcd
72 Cherry Hill Drive
Beverly, MA 01915
Phone: 978 -53 2- 880 0
Fax: 978-532-6800
Web: www.amphenolpcd.com
Advanced Circuit Technology
118 Northeastern Boulevard
Nashua, NH 03062
Phone: 603 -88 0- 600 0
Fax: 603-880-1785
Web: www.act.flexcircuit.com
Amphenol Canada Corp.
605 Milner Ave.
Toronto, Ontario M1B 5X6
Canada
Phone:416-291-4401
Fax: 416-292-0647
Web: www.amphenolcanada.com
AUTHORIZED AMPHENOL
DISTRIBUTORS
Corporate Headquarters
ALPHABETICAL LISTING
APD (All Product Distributors):
Arrow Electronics Englewood, CO
800-777-2776
www.arrow.com
Avnet EMG Dallas, TX
800-332-8638
www.avnet.com
PEI Genesis Philadelphia, PA
888-642-8750
www.peigenesis.com
Powell Electronics Logan Township, NJ
800-235-7880
www.powell.com
TTI Inc. Fort Worth, TX
800-225-5884
www.ttiinc.com
AUTHORIZED AMPHENOL INDUSTRIAL
DISTRIBUTORS
Corporate Headquarters
ALPHABETICAL LISTING
Argo International New Orleans, LA
Phone: 504-733-4500 or 800-242-2746
www.argointl.com
Gaffney-Kroese Electric Rahway, NJ
Phone: 732 -85 0- 441 8
www.gaffney-kroese.com
Geophysical Electrical
Supply Co. Houston, TX
Phone:713-645-5999
www.geosco.com
Hillcrest Enterprises Ashland, VA
Phone: 800-848-3106 or 804-798-8390
www..hillcrestenterprises.com
ITI Marine & Oilfield
PTE, Ltd. Singapore
Phone: (65 ) 6266 -6 666
www.itimarine,com
Norton Electric
Wholesale Los Angel es, CA
Phone: 323 -22 2- 718 1
www.nortonelectric.com
Offshore Marine Houston, TX
Phone: 800 -50 6- 947 3
www.amercable.com
PEI Genesis Hampshire, UK
Phone: 44 870 7 2025 60
Steck Connect ions Onta rio , Canada
Phone: 905 -60 8- 244 4
www.steckconnections.com
Steiner Electric Elk Grove Village, IL
Phone: 847 -95 6- 370 0
www.steinerelectric.com
Techn or ASA Stav a nge r, N orwa y
Phone: 47 51 84 410 0
www.technor.no
Wholesale Electric Houston, TX
Phone: 713 -74 8- 610 0
www.whoesaleelectric.com
Disadvantaged/Minority Distributors:
Cherokee Nation Dist. Stilwell, OK
918-696-2777
Electro Enterprises Oklahoma City, OK
800-324-6591
JRH Electronics Marlton, NJ
800-467-9309
INTERNATIONAL
Latin America
ARGENTINA
Amphenol Argentina
Avenida Callao 930
2nd floor Office B Plaza
C1023AAP Buenos Aires, Argentina
Phone: (54 11) 48 15 68 86
Fax: (54 11) 48 14 57 79
E-mail: ventas@amphenol.com.ar
BRAZIL
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo - SP, Brazil
Phone: (55 -1 1) 381 5.1 003
Fax: (55-11) 3815.1629
E-mail: vendas@amphenol.com.br
MEXICO
Amphenol Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F., Mexico
Phone: (52 -5 5) 525 8.9 984
Fax: (52-55) 5081.6890
E-mail: info@amphenolmexico.com
Europe
ENGLAND
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: (44-1-227) 773200
Fax: (44-1-227) 276571
Web: www.amphenol.co.uk
FRANCE
Amphenol Socapex
Promenade de l’Arve, BP29
Thyez 74301 948 Cedex, France
Phone: (33-4) 50892800
Fax: (33-4) 5096-1941
Web: www.amphenol-socapex.com
GERMANY
Amphenol-Tuchel Elect. GmbH
August-Haeusser Strasse 10
Postfach 111 0
74001 Heilbronn, Germany
Phone: (49-7131) 929 0
Fax: (49-7131) 929 414
Web: www.amphenol-tuchel.com
GERMANY
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
D-66740 Saarlouis, Germany
Phone: (49 -6 831 ) 9810-87
Fax: (49-6831) 9810-30
Web: www.amphenol-airlb.com
ITALY & REST OF EUROPE
Amphenol Italia S.p.A.
Via Barbaiana 5
20020 Lainate (Milano), Italy
Phone: 39-02-932541
Fax: 39-02-93254444
E-mail: info@amphenol-it.com
MIddle East / Africa
ISRAEL
Bar- Tec Ltd.
3 Hagavish St., P.O.B. 279
Kfir-Barkan Bldg., East Indust. Zone
Kfar Sava 44102, Israel
Phone: (972-9) 764.4100
Fax: (972-9) 7674324
E-mail: www.bar-tec.com
SOUTH AFRICA
Amphe nol Sout h Africa
30 Impala Road
2196 Sandton - Chislehurston
South Africa
Tel: (27-11) 783-9517
Fax: (27-11) 783-9519
E-mail: amphenol_africa@csi.com
TURKEY
Amphenol Turkiye
Ayazaga Mah. Meydan Sk. No. 28
Beybi Giz Plaza, Kat. 26 Maslak
34396 Istanbul
Phone: 90 (212) 335 25 01
Fax: 90 (212) 335 25 00
Web:www.amphenol.com.tr
E-mail: saracolglu@amphenol.com.tr
Asia / Pacific
AUSTRALIA
Amphenol Australia Pty Ltd
2 Fiveways Blvd. Keysborough
Melbourne, Victoria 3173
Australia
Phone: 613 8796 8888
Fax: 613 8796 8801
E-mail: info@amphenol.com.au
RUSSIA
Amphenol Russia Office
8-2 Yaroslavskaja Str.
129164 Moscow, Russia
Phone: 7495 937 634
E-mail: russia@amphenol.com
CHINA
Amp heno l Aerospac e China Office
Phone: +607 -563-40 60
E-mail: ChinaSales@amphenol-aao.com
INDIA
Amphenol Interconnect India, Pvt, Ltd.
105 Bhosari Industrial Area
Pune, 411 026, India
Phone: (91-20) 27120 481
Fax: (91-20) 27120 581
E-mail: sales@amphenol-in.com
JAPAN
Amphenol Japan Mil Aero & Industrial
471-1, Deba, Ritto-city
Shiga 520-3041, Japan
Phone: 81-77553-8501
Fax: 81-77551-2200
KOREA
Amp henol Aerospace Korea Office
Phone: +607 -563-40 61
E-mail: KoreaSales@amphenol-aao.com
SOUTHEAST ASIA
Amph enol Aerospace S outhEast Asia
Office
Phone: +607 -563-40 62
E-mail: SouthEastAsiaSales@amphenol-
aao.com
TAIWAN
Amp heno l Aerospac e Taiwan Office
Phone: +607 -563-40 63
E-mail: TaiwanSales@amphenol-
aao.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are
believed to be accurate and reliable but are presented without guarantee, war ranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our prod-
ucts are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety mea-
sures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
©2008 Amphenol Corp. Printed in U.S.A. JCP 4/2008
