Weidmuller, Canada
10 Spy Court
Markham, Ontario L3R 5H6
Telephone: (800) 268-4080
Facsimile: (877) 300-5635
Email: info1@weidmuller.ca
Website: www.weidmuller.ca
Weidmuller, Mexico
Blvd. Hermanos Serdán 698,
Col. San Rafael Oriente
Puebla, Puebla, Mexico
C.P. 72029
Telephone: 01 222 2686267
Facsimile: 01 222 2686219
Email: clientes@weidmuller.com.mx
Website: www.weidmuller.com.mx
Weidmuller, United States
821 Southlake Blvd.
Richmond, Virginia 23236
Telephone: (800) 849-9343
Facsimile: (804) 379-2593
Email: info@weidmuller.com
Website: www.weidmuller.com
The SPD II range of surge protectors are used for
transient surge protection of single and multi-phase power cir-
cuits at the main electrical panel. SPD IIIs are for the protection
of individual electrical devices. They provide common-mode pro-
tection (between each Line and Ground), with impulse discharge
capacity (Imax) 40kA for SPD II and 20kA for SPD III.
The SPD design is based on high-energy varistors (MOVs)
equipped with thermal disconnects and integral failure indica-
tors. A remote signaling contact for disconnection indication is
standard on each unit. For ease of replacement, varistors are
housed in pluggable modules with connections that are me-
chanically keyed to the base to prevent incorrect arrestor mod-
ule replacement.
Typical applications include low voltage distribution or protec-
tion of industrial control systems, equipment
assemblies and devices.
Datasheet
SPD II & III – AC Surge Protector
2
SPD II & III - AC Surge Protectors
SPD II 120V/40kA SPD II 230V/40kA
Technical Data
AC Network 120/240V, 120/208V 220/380V, 240/415V
Connection Mode 1 Pole, L-N or L-G 1 Pole, L-N or L-G
Max. Operating Voltage (MCOV) 150VAC 275VAC
TOV Withstand 150VAC 275VAC
Leakage Current at Uc <1mA <1mA
Follow Current none none
UL Nominal Discharge Current (In), 15 impulses 8/20 μs 20kA 20kA
Max. Discharge Current (Imax), 1 impulse 8/20 μs 40kA 40kA
UL Voltage Protection Rating (VPR) 500V 900V
Protection Level (Up) 0.9kV 1.25kV
UL Short-Circuit Current Rating (SCCR) 25kAIC 25kAIC
AC System Single-phase Single-phase
Thermal Disconnector UL 60691 UL 60691
Overcurrent Protection Time Delay - 125A Max. Time Delay - 125A Max.
Dimensions (mm) 90 x 18 x 67 90 x 18 x 67
Connection Screw terminals, #4 AWG Max. Screw terminals, #4 AWG Max.
Remote Signal Indicator 250VAC Max, 2A 250VAC Max, 2A
Mounting Din-rail, TS35 Din-rail, TS35
Operating Temp -50°C to +85°C -50°C to +85°C
Operating Altitude (Max.) 13,000 ft (4,000m) 13,000 ft (4,000m)
Relative Humidity 5 to 95% non-condensing, up to 100% external 5 to 95% non-condensing, up to 100% external
Enclosure Material Thermoplastic UL94-V0 Thermoplastic UL94-V0
Environmental Rating IP20 IP20
Weight 3.4 oz 3.4 oz
Approvals
IEC 61643-1 - INTERNATIONAL Class I, Class II Class I, Class II
EN 61643-11 - EUROPE Class I, Class II Class I, Class II
NF EN 61643-11 - FRANCE Class I, Class II Class I, Class II
UL1449 3rd Edition - USA and CANADA Low Voltage SPD Low Voltage SPD
RoHS Directive 2002/95/EC Directive 2002/95/EC
Ordering Data
Surge Protector Type Part No. Type Part No.
SPD II 120V/40kA 6720005410 SPD II 230V/40kA 6720005411
Bus bars Type Part No. Type Part No.
SPD 2P LINK 6720005417 SPD 2P LINK 6720005417
SPD 3P LINK 6720005418 SPD 3P LINK 6720005418
SPD 4P LINK 6720005419 SPD 4P LINK 6720005419
For transient voltage protection of
single and multi-phase circuits, in the
main electrical panel, downstream
of the main circuit breaker, or in
control panels.
L/N
Ft
Mi
C
to
1.1
1.2
1.4
V
18
L/N
90
67
10.6
L/N
Ft
Mi
C
to
1.1
1.2
1.4
V
18
L/N
90
67
10.6
V: High-energy varistor
Ft: Thermal fuse
C: Remote signaling contact
t0: Thermal disconnection
system
Mi: Disconnection indicator
SPD II bus bars
3
SPD II & III - AC Surge Protectors
For transient voltage protection of
single and multi-phase circuits, in the
main electrical panel, downstream
of the main circuit breaker, or in
control panels.
SPD II 277V/40kA SPD II 480V/40kA
Technical Data
AC Network 220/380V, 277V 347/600V, 480V
Connection Mode 1 Pole, L-N or L-G 1 Pole, L-N or L-G
Max. Operating Voltage (MCOV) 400VAC 550VAC
TOV Withstand 400VAC 550VAC
Leakage Current at Uc <1mA <1mA
Follow Current none none
UL Nominal Discharge Current (In), 15 impulses 8/20 μs 20kA 20kA
Max. Discharge Current (Imax), 1 impulse 8/20 μs 40kA 40kA
UL Voltage Protection Rating (VPR) 1500V 1800V
Protection Level (Up) 1.8kV 2.5kV
UL Short-Circuit Current Rating (SCCR) 25kAIC 25kAIC
AC System Single-phase Single-phase
Thermal Disconnector UL 60691 UL 60691
Overcurrent Protection Time Delay - 125A Max. Time Delay - 125A Max.
Dimensions (mm) 90 x 18 x 67 90 x 18 x 67
Connection Screw terminals, #4 AWG Max. Screw terminals, #4 AWG Max.
Remote Signal Indicator 250VAC Max, 2A 250VAC Max, 2A
Mounting Din-rail, TS35 Din-rail, TS35
Operating Temp -50°C to +85°C -50°C to +85°C
Operating Altitude (Max.) 13,000 ft (4,000m) 13,000 ft (4,000m)
Relative Humidity 5 to 95% non-condensing, up to 100% external 5 to 95% non-condensing, up to 100% external
Enclosure Material Thermoplastic UL94-V0 Thermoplastic UL94-V0
Environmental Rating IP20 IP20
Weight 3.4 oz 3.4 oz
Approvals
IEC 61643-1 - INTERNATIONAL Class I, Class II Class I, Class II
EN 61643-11 - EUROPE Class I, Class II Class I, Class II
NF EN 61643-11 - FRANCE Class I, Class II Class I, Class II
UL1449 3rd Edition - USA and CANADA Low Voltage SPD Low Voltage SPD
RoHS Directive 2002/95/EC Directive 2002/95/EC
Ordering Data
Surge Protector Type Part No. Type Part No.
SPD II 277V/40kA 6720005412 SPD II 480V/40kA 6720005413
Bus bars Type Part No. Type Part No.
SPD 2P LINK 6720005417 SPD 2P LINK 6720005417
SPD 3P LINK 6720005418 SPD 3P LINK 6720005418
SPD 4P LINK 6720005419 SPD 4P LINK 6720005419
L/N
Ft
Mi
C
to
1.1
1.2
1.4
V
18
L/N
90
67
10.6
L/N
Ft
Mi
C
to
1.1
1.2
1.4
V
18
L/N
90
67
10.6
V: High-energy varistor
Ft: Thermal fuse
C: Remote signaling contact
t0: Thermal disconnection
system
Mi: Disconnection indicator
SPD II bus bars
SPD II & III - AC Surge Protectors
4
For transient voltage protection
of multi-phase circuits with
TT grounding systems.
SPD II N/PE
N
90
67 18
N
GDT
GDT: Specic gas tube
N
90
67 18
N
GDT
SPD II bus bars
Technical Data
Network 230/400V, 120/208V
Max. Operating Voltage (MCOV) 255VAC
TOV Withstand 400VAC
Leakage Current at Uc none
Follow Current 100A
Nominal Discharge Current (In), 15 impulses 8/20 μs 20kA
Max. Discharge Current (Imax), 1 impulse 8/20 μs 40kA
Protection Level (Up) 1.5kV
UL Short-Circuit Current Rating (SCCR) 25kAIC
Dimensions (mm) 90 x 18 x 67
Connection Screw terminals, #4 AWG Max.
Mounting Din-rail, TS35
Operating Temp -40°C to +85°C
Enclosure Material Thermoplastic UL94-V0
Environmental Rating IP20
Approvals
IEC 61643-1 - INTERNATIONAL Class II
EN 61643-11 - EUROPE Class II
NF EN 61643-11 - FRANCE Class II
UL1449 3rd Edition - USA and CANADA Low Voltage SPD
Ordering Data
Surge Protector Type Part No.
SPD II N/PE 6720005414
Bus bars Type Part No.
SPD S LINK 1/3 6720005461
5
SPD II & III - AC Surge Protectors
For devices with single phase
voltage supplies
Protects L & N conductors
(common and differential modes)
Integrated contact for remote
status indication
Local status indicator on arrester
Quick replacement with
pluggable arrester
SPD II 120V/G/40kA
90
67
10.6
18
LN
N
L
Ft
t
o
V
GDT
C
1.1
1.2
1.4
C
1.1
1.2
1.4
L/NL/N
Ft Ft
t
o
t
o
VV
Imax
40 kA
V : High energy varistor
GDT : High energy Gas tube
Ft : Thermal fuse
C : Remote signaling contact
t° : Thermal disconnection system
SPD II bus bars
N
L
Ft
t
o
V
GDT
C
1.1
1.2
1.4
V: High-energy varistor
GDT: High energy gas tube
Ft: Thermal fuse
C: Remote signaling contact
t0: Thermal disconnection system
Technical Data
AC Network 120V 230V
Connection Mode TN-TT TN
Max. Operating Voltage (MCOV) 150VAC 255VAC
TOV Withstand 150VAC 255VAC
Leakage Current at Uc <1mA <1mA
Protection Mode MC/MD MC/MD
Nominal Discharge Current (In), 15 impulses 8/20 μs 20kA 20kA
Max. Discharge Current (Imax), 1 impulse 8/20 μs 40kA 40kA
Protection Level (Up) 1.5/0.9kV 1.5/1.25kV
Residual Voltage @ 5k 0.6kV 0.9kV
Short-Circuit Current Rating (SCCR) 10kAIC 10000 A
AC System Single-phase Single-phase
Thermal Disconnector Internal Internal
Overcurrent Protection Fuses type gG 50A Max. Fuses type gG 50A Max.
Dimensions (mm) 90 x 18 x 58 90 x 18 x 67
Connection Screw terminals, #4AWG Max. Screw terminals, #4AWG Max.
Disconnection Indicator 2 mechanical indicators 2 mechanical indicators
Installation Ground Fault Breaker Type S or delayed Type S or delayed
Mounting Din-rail, TS35 Din-rail, TS35
Operating Temp -40°C to +85°C -40°C to +85°C
Operating Altitude 13,000 ft (4,000m) 13,000 ft (4,000m)
Relative Humidity 5 to 95% non-condensing, up to 100% external 5 to 95% non-condensing, up to 100% external
Enclosure Material Thermoplastic UL94-V0 Thermoplastic UL94-V0
Environmental Rating IP20 IP20
Weight 3.4 oz 3.4 oz
Approvals
IEC 61643-1 - INTERNATIONAL Low Voltage SPD - Test Class II Low Voltage SPD - Test Class
EN 61643-11 - EUROPE Low Voltage SPD - Test Class II Low Voltage SPD - Test Class
NF EN 61643-11 - FRANCE Low Voltage SPD - Test Class II Parafoudre Basse Tension - Essais Classe
UL1449 3rd Edition - USA and CANADA UL le E338172, CSA le 253665 UL le E338172, CSA le 253665
Ordering Data
Surge Protector Type Part No. Type Part No.
SPD II 120V/G/40kA 6720005415 SPD II 240V/G/40kA 6720005503
Bus bars Type Part No. Type Part No.
SPD 2P LINK 6720005417 SPD 2P LINK 6720005417
SPD 3P LINK 6720005418 SPD 3P LINK 6720005418
SPD 4P LINK 6720005419 SPD 4P LINK 6720005419
SPD II 240V/G/40kA
6
SPD II & III - AC Surge Protectors
90
67
10.6
18
LN
N
L
Ft
t
o
V
GDT
C
1.1
1.2
1.4
C
1.1
1.2
1.4
L/NL/N
Ft Ft
t
o
t
o
VV
Imax
40 kA
V : High energy varistor
GDT : High energy Gas tube
Ft : Thermal fuse
C : Remote signaling contact
t° : Thermal disconnection system
For transient voltage protection of
single-phase devices.
Protects 2 conductors - typically L & N,
but could also be L1 & L2
Integrated contact for remote
status indication
Pluggable replaceable arrester
SPD III 120V/40kA
Technical Data
AC Network 120V
Connection Mode TN
Max. Operating Voltage (MCOV) 150VAC
TOV Withstand 150VAC
Max load current 16A
Leakage Current at Uc <1mA
Follow Current none
Nominal Discharge Current (In), 15 impulses 8/20 μs 20kA
Max. Discharge Current (Imax), 1 impulse 8/20 μs 40kA
Protection Level (Up) 1.5/0.9kV
Short-Circuit Current Rating (SCCR) 10kAIC
AC System Single-phase
Thermal Disconnector UL 60691 Internal
Overcurrent Protection Fuses type gG - 50A Max.
Dimensions (mm) 90 x 18 x 58
Connection Screw terminals, #4 AWG Max.
Remote Signal Indicator 250VAC Max, 2A
Mounting Din-rail, TS35
Operating Temp -40°C to +85°C
Operating Altitude 13,000 ft (4,000m)
Relative Humidity 5 to 95% non-condensing, up to 100% external
Enclosure Material Thermoplastic UL94-V0
Environmental Rating IP20
Weight 3.4 oz
Approvals
IEC 61643-1 - INTERNATIONAL Class II, Class III
EN 61643-11 - EUROPE Class II, Class III
NF EN 61643-11 - FRANCE Class II, Class III
UL1449 3rd Edition - USA and CANADA UL le E338172, le 253665
Ordering Data
Surge Protector Type Part No.
SPD III 120V/40kA 6720005416
N
L
Ft
t
o
V
GDT
C
1.1
1.2
1.4
C
1.1
1.2
1.4
L/NL/N
Ft Ft
t
o
t
o
VV
V: High-energy varistor
GDT: High energy gas tube
Ft: Thermal fuse
C: Remote signaling contact
t0: Thermal disconnection system
7
SPD II & III - AC Surge Protectors
Basic congurations 1
Basic congurations 2
L/N
TF
L/N
TF
L/N
TF
L1
TF
L2
TF
L3
TF
Nom. V Description Qty Qty Qty Part No.
110/120V SPD II 120V/40kA 1 2 3 6720005410
230/240V SPD II 230V 40kA 1 2 3 6720005411
277V SPD II 277V 40kA 1 2 3 6720005412
480V SPD II 480V 40kA 1 2 3 6720005413
All SPD 2P Link 0 1 0 6720005417
All SPD 3P Link 0 0 1 6720005418
Nom. V Description Qty Part No.
110/120V SPD II 120V/40kA 4 6720005410
230/240V SPD II 230V 40kA 4 6720005411
277V SPD II 277V 40kA 4 6720005412
480V SPD II 480V 40kA 4 6720005413
All SPD 4P Link 1 6720005419
SPD parts needed:
SPD parts needed:
L1
TF
L2
TF
L3
TF
N
TF
8
SPD II & III - AC Surge Protectors
Subject to technical changes · 7/13 · 1.5M · LIT1319
Nom. V Description Qty Part No.
110/120V SPD II 120V/40kA 3 6720005410
230/240V SPD II 230V 40kA 3 6720005411
277V SPD II 277V 40kA 3 6720005412
480V SPD II 480V 40kA 3 6720005413
All SPD II N/PE 1 6720005414
All SPD S Link 1/3 1 6720005461
Nom. V Description Qty Part No.
120V SPD II 120V/G/40kA 1 6720005415
SPD parts needed:SPD parts needed:
L1
TF
L2
TF
L3
TF
N
TT network
L1
TF
N
TT network
Nom: 120V
Basic congurations 3