(R) RT9068 60V, 30 A IQ, Low Dropout Voltage Linear Regulator General Description Features The RT9068 family are high voltage (60V operation), low quiescent current low dropout linear regulators capable of supplying 50mA of output current with a maximum dropout voltage of 300mV. The low quiescent and shutdown currents (30A operating and 2A shutdown) are ideal for use in battery-powered and/or high voltage systems. Ground current is well-controlled in all conditions, including dropout. The RT9068 family operates with any reasonable output capacitors including 1F low-ESR ceramic types and features excellent line and load transient responses. Internal protection circuitry includes reverse-battery protection, current limiting, thermal shutdown, and reverse current protection. Output voltage accuracy is 2% over the entire line and load range. These devices are available in 3 fixed-output versions (2.5V, 3.3V, 5V) as well as a version that supports an adjustable output voltage (1.25V to 60V). All versions come in SOP-8 and MSOP-8 packages with an exposed pad for high power dissipation. Wide Input Voltage Range : 4.5V to 60V A Low Quiescent Current : 30 A Operating and 2 Shutdown Low Dropout Voltage : 300mV Maximum at 50mA Fixed (2.5V, 3.3V, 5V) and Adjustable (1.25V to 60V) Versions 2% Output Tolerance Stable with 1 F Output Capacitor (Aluminum, Tantalum or Ceramic) Inherent Reverse-Current Protection (No diode needed) -60V Reverse-Battery Protection Applications Low Current, High Voltage Regulators Battery Powered Applications Telecom and Datacom Applications Automotive Application Typical Application Circuit VOUT 2.5V/3.3V/5V VIN 4.5V to 60V VIN 4.5V to 60V RT9068 CIN 0.18F VIN SHDN GND RT9068-25/33/50 COUT 1F CIN 0.18F VIN SENSE GND R1 COUT 1F FB CIN 0.18F VIN VOUT SENSE SHDN R2 GND RT9068 (Adjustable Up to 25V Output) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 RT9068 VOUT SHDN VOUT 1.25V to 60V VIN 4.5V to 60V RT9068 VOUT SENSE VOUT 1.25V to 25V CCOMP R1 FB COUT 1F R2 RT9068 (Adjustable Up to 60V Output) is a registered trademark of Richtek Technology Corporation. www.richtek.com 1 RT9068 Ordering and Marking Information Part No. RT906825GFP RT906825GSP RT906833GFP RT906833GSP RT906850GFP RT906850GSP RT9068 GFP RT9068 GSP Output Voltage Package MSOP-8 2.5V 3.3V 0B= SOP-8 Exposed RT9068GSP Pad-Option 1) Richtek products are : 3 4 GND 7 9 6 5 MSOP-8 VOUT SENSE FB NC VIN GND GND SHDN 8 2 3 4 GND 7 9 6 5 RT9068 MSOP-8 VOUT VIN 8 SENSE 2 NC 3 NC 4 GND 9 7 GND 6 GND 5 SHDN RoHS compliant and compatible with the current requireRT9068-25/33/50 ments of IPC/JEDEC J-STD-020. VIN GND GND SHDN 8 2 RT9068-25/33/50 08= Note : VOUT SENSE NC NC 0A= SOP-8 Exposed RT906850GSP Pad-Option 1) MSOP-8 Adjustable 09= (TOP VIEW) SOP-8 Exposed RT906833GSP Pad-Option 1) MSOP-8 5V Marking Information SOP-8 Exposed RT906825GSP Pad-Option 1) MSOP-8 Pin Configuration SOP-8 Suitable for use in SnPb or Pb-free soldering processes. VOUT 8 SENSE 2 FB 3 NC 4 GND 9 VIN 7 GND 6 GND 5 SHDN RT9068 SOP-8 Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 2 is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 Pin Description Pin No. RT9068RT9068GSP/GFP 25/33/50GSP/GFP 1 1 Name Function VOUT VOUT supplies power to the load. A minimum output capacitor of 1F is required for stable operation. Output voltage sense. For applications with VOUT 25V, SENSE can be connected to the output voltage to optimize the control loop compensation. For applications with VOUT > 25V (adjustable versions only), SENSE must be left unconnected. Control loop compensation is optimized by adding a feed-forward capacitor in the feedback resistor divider connected to FB (see Adjustable Output Voltage and Compensation section). 2 2 SENSE 3 -- NC No internal connection. -- 3 FB Feedback input. Connect to the center tap of a resistor divider for setting the output voltage. (Adjustable versions only) 4 -- NC No internal connection. 5 5 SHDN Shutdown control input (Active High). Connect SHDN high to disable the output voltage and reduce the IC's quiescent current to 2A (typical). Connect SHDN low to enable the output. SHDN is a high-voltage input (also able to withstand reverse voltage) and can be connected directly to a high-voltage input. 6, 7, 9* 6, 7, 9* GND Ground. The exposed pad should be soldered to a large PCB and connected to GND for maximum thermal dissipation. 8 8 VIN Power input. Bypass VIN with a 0.18F or larger capacitor with adequate voltage rating. * exposed pad Functional Block Diagram VOUT VIN Current Limit Error Amp VOUT VIN Current Limit Error Amp SHDN SHDN OverTemperature Protection SENSE - + + - OverTemperature Protection SENSE FB Reference Reference GND RT9068-25/33/50 (Fixed Output) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 GND RT9068 (Adjustable Output) is a registered trademark of Richtek Technology Corporation. www.richtek.com 3 RT9068 Operation The RT9068 is a high input-voltage linear regulator specifically designed to minimize external components. The input voltage range is from 4.5V to 60V. The device supplies 50mA of output current with a maximum dropout voltage of 300mV. Its 30A quiescent and 2A shutdown currents make it ideal for use in battery-powered applications. Unlike many PNP LDO regulators, ground current does not increase much in dropout conditions. Output Transistor The RT9068 includes a built-in PNP output transistor configured for low dropout voltage. The output transistor blocks reverse current if the output voltage is held higher than the input voltage (such as in battery-backup applications) so no additional output blocking diode is needed. Over-Temperature Protection The over temperature protection function will turn off the PNP output transistor when the internal junction temperature exceeds 155C (typ.). Once the junction temperature cools down by approximately 5C, the regulator will automatically resume operation. Reverse-Battery Protection The RT9068 inputs (VIN and SHDN) can withstand reverse voltages as high as -60V. Both the IC and the load are protected, as long as the load impedance is 500 or less. In these conditions, the output voltage is guaranteed to be no more negative than -1V with the maximum negative input voltage. In battery-powered applications, no additional protection against battery reversal is typically needed. Error Amplifier Reverse-Output Protection The Error Amplifier compares the output feedback voltage from an internal feedback voltage divider (fixed output versions) or FB (adjustable output versions) to an internal reference voltage and controls the PNP output transistor's base current to maintain output voltage regulation. The RT9068's internal dividers are placed between SENSE and GND and have a divider resistance of about 1M. The RT9068 protects against current flow to the input (VIN) when the output voltage exceeds VIN. This simplifies battery and capacitive "keep-alive" circuits since they need no additional output blocking diode. Current Limit Protection The RT9068 provides a current limit function to prevent damage during output over-load or shorted-circuit conditions. The output current is detected by an internal current-sense transistor. Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 4 Shutdown Input (8 Pin Versions) The RT9068 SHDN input is an active-high input that turns off the output transistor and reduces the quiescent current to 2A typical. Connect SHDN to a voltage below 0.6V for normal operation. is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 Absolute Maximum Ratings (Note 1) VIN to GND ------------------------------------------------------------------------------------------------------------------SHDN to GND --------------------------------------------------------------------------------------------------------------VOUT to GND --------------------------------------------------------------------------------------------------------------SENSE to GND ------------------------------------------------------------------------------------------------------------VIN to VOUT/SENSE when |VIN| |VOUT| (Normal Operation or Reverse-Battery Condition) -------VIN to VOUT/SENSE when VOUT VIN 0 (Reverse-VOUT Condition) -----------------------------------FB -----------------------------------------------------------------------------------------------------------------------------FB Current ------------------------------------------------------------------------------------------------------------------Power Dissipation, PD @ TA = 25C MSOP-8 ---------------------------------------------------------------------------------------------------------------------SOP-8 ------------------------------------------------------------------------------------------------------------------------Package Thermal Resistance (Note 2) MSOP-8, JA ----------------------------------------------------------------------------------------------------------------MSOP-8, JC ---------------------------------------------------------------------------------------------------------------SOP-8, JA ------------------------------------------------------------------------------------------------------------------SOP-8, JC ------------------------------------------------------------------------------------------------------------------Junction Temperature -----------------------------------------------------------------------------------------------------Lead Temperature (Soldering, 10 sec.) -------------------------------------------------------------------------------Storage Temperature Range --------------------------------------------------------------------------------------------ESD Susceptibility (Note 3) HBM (Human Body Model) ----------------------------------------------------------------------------------------------- Recommended Operating Conditions -60V to 80V -60V to 80V -40V to 80V -30V to 35V -60V to 80V -35V -0.3V to 10V -6mA to 6mA 2.1W 3.26W 47.4C/W 11.9C/W 30.6C/W 3.4C/W 150C 260C -65C to 150C 2kV (Note 4) Supply Input Voltage ------------------------------------------------------------------------------------------------------- 4.5V to 60V Junction Temperature Range --------------------------------------------------------------------------------------------- -40C to 125C Ambient Temperature Range --------------------------------------------------------------------------------------------- -40C to 85C Electrical Characteristics (4.5V < VIN < 60V, VSHDN = 0V, TA = 25C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit 4.5 -- 60 V Input Supply Operational VIN VIN 0 < IOUT < 50mA Quiescent Current IQ VIN = 24V, VSHDN = 0V -- 30 40 A Shutdown Current ISHDN VIN = 24V, VSHDN = 2.5V, VOUT = 0 -- 2 15 A Input Reverse Leakage Current IVINr VIN = 60V, VOUT = 0V -- -- 0.1 mA 120 -- 300 mA Output Voltage and Current Output Current Limit ILIM Line Regulation VLINE 5.5V < VIN < 60V, IOUT = 50mA -- 0.5 -- % Load Regulation VLOAD 0.1mA < IOUT < 50mA -- 0.7 -- % Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 is a registered trademark of Richtek Technology Corporation. www.richtek.com 5 RT9068 Parameter Min Typ Max Unit 0 < IOUT < 50mA 1.225 1.25 1.275 V 0 < IOUT < 50mA 2.45 2.5 2.55 0 < IOUT < 50mA 3.24 3.3 3.36 5.4V < VIN < 60V, 0 < IOUT < 50mA 4.9 5 5.1 -- 20 100 nA VIN = 60V, RL = 500 -- -- 1 V IOUT = 1mA -- 15 80 IOUT = 10mA -- 55 150 IOUT = 50mA -- 150 300 Power Supply Rejection Rate PSRR f = 1kHz, IOUT = 50mA -- 60 -- dB Output Noise Voltage VON IOUT = 50mA, f = 10Hz to 100kHz -- 200 -- VRMS Shutdown Output Voltage VOUTSD SHDN = VIN -- -- 100 mV SHDN High Threshold VIH -- 1.6 2.2 V SHDN Low Threshold VIL 0.6 1.2 -- V SHDN Input Bias Current ISHDN SHDN = VIN -- 0.6 1.2 VSHDN = 0V -- -- 0.1 145 155 165 FB Regulation Voltage RT9068 Symbol VFB RT9068-25 Output Voltage RT9068-33 VOUT RT9068-50 FB Input Bias Current RT9068 IFB Output Voltage with Reverse VROUT Polarity VIN Dropout Voltage Test Conditions VDROP V mV Shutdown A Thermal Protection Thermal Shutdown TSD C Note 1. Stresses beyond those listed "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may affect device reliability. Note 2. JA is measured at TA = 25C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. JC is measured at the exposed pad of the package. Note 3. Devices are ESD sensitive. Handling precaution is recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 6 is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 Typical Operating Characteristics (TA = 25C, CIN = 0.18F, COUT = 1F, unless otherwise specified) Output Voltage vs. Output Current Quiescent Current vs. Input Voltage 35 0.0 Quiescent Current (A) Output Voltage (%) 1 30 -0.2 -0.4 -0.6 -0.8 SHDN_Low 25 20 15 10 SHDN_High 5 VIN = 4.5V to 60V VIN = 14V -1.0 0 10 20 30 40 0 0 50 10 20 Output Current (mA) 30 40 50 60 Input Voltage (V) Output Voltage vs. Temperature Quiescent Current vs. Temperature 45 3.4 VIN = 14V Output Voltage (V) 3.4 Quiescent Current (A) 40 IOUT = 1mA 3.3 IOUT = 10mA 3.3 3.2 3.2 VIN = 14V -25 0 25 50 75 100 30 SHDN_Low 25 20 15 10 SHDN_High 5 0 3.1 -50 35 -50 125 -25 0 Temperature(C) SHDN Threshold Voltage (V) PSRR/dB -20 COUT = 1F -30 -40 -50 COUT = 10F -70 IOUT = 50mA -80 10 100 1000 10000 100000 Frequency (Hz) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 75 100 125 2.5 -10 -60 50 SHDN Threshold Voltage vs. Temperature PSRR 0 25 Temperature (C) 1000000 2.0 VIH 1.5 VIL 1.0 0.5 VIN = 14V 0.0 -50 -25 0 25 50 75 100 125 150 Temperature (C) is a registered trademark of Richtek Technology Corporation. www.richtek.com 7 RT9068 Output Voltage vs. Input Voltage Current Limit vs. Input Voltage 3.40 210 Output Voltage (V) 1 Current Limit (mA) 3.38 TA = 125C 190 170 TA = -40C 150 130 110 90 3.36 3.34 3.32 3.30 IOUT = 0mA IOUT = 40mA IOUT = 1mA IOUT = 50mA IOUT = 5mA IOUT = 10mA IOUT = 20mA IOUT = 30mA 3.28 3.26 3.24 3.22 70 3.20 0 10 20 30 40 50 60 0 10 20 3.0 0.25 2.5 In Dropout 1.5 2V Dropout 1.0 0.10 0.0 0.00 SHDN = VIN, VOUT = SENSE = GND 0 10 20 30 40 50 -80 Output Current (mA) -70 -60 -50 -40 -30 -20 -10 0 Reverse Voltage (V) Dropout Voltage vs. Temperature Output Noise vs. Frequency 200 250 IOUT = 0mA IOUT = 40mA IOUT = 1mA IOUT = 50mA IOUT = 10mA IOUT = 20mA IOUT = 30mA 180 Output Noise (V) Dropout Voltage (mV) 60 0.15 0.05 150 50 0.20 0.5 200 40 Leakage Current vs. Reverse Voltage 0.30 Leakage Current (mA)1 Ground Current (mA) Ground Current vs. Output Current 3.5 2.0 30 Input Voltage (V) Input Voltage (V) 100 160 140 50 120 0 100 VIN = 12V, IOUT = 10mA -50 -25 0 25 50 75 100 Temperature (C) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 8 125 10 100 1000 10000 100000 Frequency (Hz) is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 VOUT vs. VIN Minimum Input Voltage vs. Temperature Minimum Input Voltage (V) 3.5 3.0 IOUT = 50mA IOUT = 10mA 2.5 VIN (50V/Div) 2.0 1.5 1.0 VOUT (2V/Div) 0.5 IOUT = 50mA 0.0 -50 -25 0 25 50 75 100 125 Time (1ms/Div) Temperature (C) Line Transient Response Load Transient Response VIN = 14V, VOUT = 3.3V, IOUT = 1mA to 50mA to 1mA VOUT_ac (50mV/Div) VIN (10V/Div) VOUT_ac (100mV/Div) IOUT (20mA/Div) IOUT = 20mA Time (25s/Div) Time (25s/Div) Load Transient Response Load Transient Response VIN = 14V, VOUT = 3.3V VIN = 14V, VOUT = 3.3V VOUT_ac (20mV/Div) VOUT_ac (50mV/Div) IOUT (20mA/Div) IOUT (20mA/Div) IOUT = 10mA to 40mA to 10mA Time (10s/Div) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 IOUT = 10mA to 60mA to 10mA Time (10s/Div) is a registered trademark of Richtek Technology Corporation. www.richtek.com 9 RT9068 Turn-On by SHDN at No Load Power-On at No Load VIN (50V/Div) VOUT (1V/Div) SHDN (2V/Div) VIN = 60V, VOUT = 3.3V, IOUT = 0mA VOUT (1V/Div) IOUT (50mA/Div) IOUT (50mA/Div) Time (50s/Div) Time (500s/Div) Power-On at 50mA Load Turn-On by SHDN at 50mA Load VIN (50V/Div) SHDN (2V/Div) VOUT (1V/Div) VOUT (1V/Div) IOUT (50mA/Div) VIN = 60V, VOUT = 3.3V, IOUT = 50mA Time (50s/Div) Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 10 VIN = 60V, VOUT = 3.3V, IOUT = 0mA IOUT (50mA/Div) VIN = 60V, VOUT = 3.3V, IOUT = 50mA Time (500s/Div) is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 Applications Information The RT9068 is a high input-voltage linear regulator specifically designed to minimize external components. The input voltage range is from 4.5V to 60V. The device supplies 50mA of output current with a maximum dropout voltage of 300mV. The fixed output versions are equipped with internal resistive dividers to set the output voltage to 2.5V, 3.3V, or 5V, respectively. The total resistance of the each internal feedback divider is about 1M The internal dividers connect between SENSE and GND, with the midpoint connecting to the input of the error amplifier. These versions are all internally compensated. Adjustable Output Voltage and Compensation RT9068 The adjustable output versions may be set to provide from 1.25V to 60V, using external feedback voltage divider resistors (Figure 1). These included an internal feedforward compensation capacitor, connected between SENSE and FB, which may be used when regulating at output voltages up to 25V. To achieve the correct compensation (together with your external FB divider, use an upper divider resistor (R1) value between 500k and 1M. Calculate R2 according to the following formula : R2 = R1 / (VOUT / 1.25V - 1). For output voltages greater than 25V an external feedforward capacitor (Figure 2) should be used and SENSE should be left unconnected. Choose a lower divider resistor (R2) at least 10k and calculate R1 according to the following formula : R1 = R2 x (VOUT / 1.25V - 1), Then, calculate the compensation capacitor (CCOMP) value according to the following formula : CCOMP = 25s / R1. RT9068 CIN 0.18F VIN RT9068 CIN 0.18F VIN VOUT SENSE CCOMP R1 COUT 1F VOUT 1.25V to 60V FB SHDN R2 GND Figure 2. RT9068 Adjustable Output Above 25V Fixed VOUT Applications VIN 4.5V to 60V VIN 4.5V to 60V VOUT SENSE SHDN GND R1 COUT 1F VOUT 1.25V to 25V Remote-Sense Applications Since VOUT and SENSE (and FB) are separate pins, it is possible to connect SENSE to the output voltage remotely at the load (as long as the output voltage is 25V or less). FB can also be connected remotely, with SENSE unconnected if the output exceeds 25V. Remote sensing eliminates output voltage errors due to any resistive voltage drop between VOUT and the load. (Voltage drops in the ground connection cannot be compensated.) Added External NPN for High-Current Applications Higher output currents and/or increased power dissipation are possible using an external NPN output transistor. VOUT drives the base of the transistor and SENSE and/or FB monitors the actual output voltage, as in normal applications. The fixed-output versions (Figure 3) or adjustable-output version (Figure 4) can be used. Figure 3 and Figure 4 have no current limit and should be used with care. If a crude current limit is desired, add the two diodes and resistor shown in Figure 5. The approximate current limit is 0.7V/R3. Any small switching diodes can be used and size R3 for the power dissipated in R3, which is typically 0.7V x 0.7V / R3. VIN 4.5V to 60V RT9068 CIN 0.18F VIN MJD31C VOUT 100 SHDN SENSE GND COUT 10F VOUT 2.5V/3.3V/5V FB R2 Figure 3. RT9068-25/33/50 External Transistor Application Figure 1. RT9068 Adjustable Output Up to 25V Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 is a registered trademark of Richtek Technology Corporation. www.richtek.com 11 RT9068 PD(MAX) = (TJ(MAX) - TA) / JA CIN 0.18F VOUT VIN 100 CCOMP SENSE SHDN VOUT 1.25V to 60V COUT 10F R1 FB GND R2 Figure 4. RT9068 External Transistor Application VIN 4.5V to 60V RT9068 CIN 0.18F VIN MJD31C VOUT 100 SHDN SENSE GND 1N4148 x 2 R3 COUT 10F VOUT 2.5V/3.3V/5V Figure 5. RT9068 External Transistor Application with Current Limit Component Selection A low-ESR capacitor such as ceramic type must be connected between VIN and GND with short, wide traces to bypass input noise. RT9068 is designed to work with small input capacitor to reduce the cost from high-voltage low-ESR requirement. To guarantee a minimum 0.1F input capacitance, a ceramic 0.18F input capacitor with an appropriate voltage rating is recommended. The RT9068 operates with any reasonable output capacitor including low-ESR ceramic types. Low-ESR aluminum and tantalum capacitor may also be used. A minimum of 1F is recommended and much higher values are also acceptable. Connect the output capacitor between VOUT and GND with short, wide traces to keep the circuit stable. Thermal Considerations For continuous operation, do not exceed absolute maximum junction temperature. The maximum power dissipation depends on the thermal resistance of the IC package, PCB layout, rate of surrounding airflow, and difference between junction and ambient temperature. The maximum power dissipation can be calculated by the following formula : Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 12 where TJ(MAX) is the maximum junction temperature, TA is the ambient temperature, and JA is the junction to ambient thermal resistance. For recommended operating condition specifications, the maximum junction temperature is 125C. The junction to ambient thermal resistance, JA, is layout dependent. For MSOP-8 (Exposed Pad) package, the thermal resistance, JA, is 47.4C/W on a standard JEDEC 51-7 four-layer thermal test board. For SOP-8 (Exposed Pad) package, the thermal resistance, JA, is 30.6C/W on a standard JEDEC 51-7 four-layer thermal test board. The maximum power dissipation at TA = 25C can be calculated by the following formulas : PD(MAX) = (125C - 25C) / (47.4C/W) = 2.1W for MSOP-8 (Exposed Pad) package PD(MAX) = (125C - 25C) / (30.6C/W) = 3.26W for SOP-8 (Exposed Pad) package The maximum power dissipation depends on operating ambient temperature for fixed T J(MAX) and thermal resistance, JA. The derating curves in Figure 6 allow the designer to see the effect of rising ambient temperature on the maximum power dissipation. 4.0 Maximum Power Dissipation (W)1 VIN 4.5V to 60V RT9068 3.5 Four-Layer PCB SOP-8 (Exposed Pad) 3.0 2.5 2.0 MSOP-8 (Exposed Pad) 1.5 1.0 0.5 0.0 0 25 50 75 100 125 Ambient Temperature (C) Figure 6. Derating Curve of Maximum Power Dissipation is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 Layout Consideration VOUT COUT VOUT SENSE 2 NC 3 NC 4 GND 9 8 VIN 7 GND VIN CIN 6 GND GND 5 SHDN Figure 7. PCB Layout Guide Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. DS9068-07 April 2018 is a registered trademark of Richtek Technology Corporation. www.richtek.com 13 RT9068 Outline Dimension D L EXPOSED THERMAL PAD (Bottom of Package) U E V E1 e A2 A A1 b Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 0.810 1.100 0.032 0.043 A1 0.000 0.150 0.000 0.006 A2 0.750 0.950 0.030 0.037 b 0.220 0.380 0.009 0.015 D 2.900 3.100 0.114 0.122 e 0.650 0.026 E 4.800 5.000 0.189 0.197 E1 2.900 3.100 0.114 0.122 L 0.400 0.800 0.016 0.031 U 1.300 1.700 0.051 0.067 V 1.500 1.900 0.059 0.075 8-Lead MSOP (Exposed Pad) Plastic Package Copyright (c) 2017 Richtek Technology Corporation. All rights reserved. www.richtek.com 14 is a registered trademark of Richtek Technology Corporation. DS9068-07 April 2018 RT9068 H A M EXPOSED THERMAL PAD (Bottom of Package) Y J X B F C I D Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 4.801 5.004 0.189 0.197 B 3.810 4.000 0.150 0.157 C 1.346 1.753 0.053 0.069 D 0.330 0.510 0.013 0.020 F 1.194 1.346 0.047 0.053 H 0.170 0.254 0.007 0.010 I 0.000 0.152 0.000 0.006 J 5.791 6.200 0.228 0.244 M 0.406 1.270 0.016 0.050 X 2.000 2.300 0.079 0.091 Y 2.000 2.300 0.079 0.091 X 2.100 2.500 0.083 0.098 Y 3.000 3.500 0.118 0.138 Option 1 Option 2 8-Lead SOP (Exposed Pad) Plastic Package Richtek Technology Corporation 14F, No. 8, Tai Yuen 1st Street, Chupei City Hsinchu, Taiwan, R.O.C. Tel: (8863)5526789 Richtek products are sold by description only. Customers should obtain the latest relevant information and data sheets before placing orders and should verify that such information is current and complete. Richtek cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Richtek product. Information furnished by Richtek is believed to be accurate and reliable. However, no responsibility is assumed by Richtek or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Richtek or its subsidiaries. DS9068-07 April 2018 www.richtek.com 15