3 stage charging
AC 115/230VAC selected by switch
Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
Protection: Overload / Short circuit / Reverse polarity / Over voltage
/ Over temperature
Cooling by free air convection
Charger for lead-acid batteries
2 color LED loading indicator
Low cost, High reliability
2 years warranty
Features :
P:WithPassivePFC
N:WithoutPassivePFC
1.300WwithoutFAN
2.360WwithFAN
PB 300/360 12
SPECIFICATION
PB-300 -12 PB-300 -24
MODEL
BOOSTCHARGEVOLTAGE
FLOATCHARGEVOLTAGE
OUTPUTCURRENT(max.)
CONTINUOUSOUTPUT
CURRENT(Typ.) (Note6)
BATTERY TYPE
VOLTAGE ADJUSTABLERANGE
RECOMMENDEDBATTERY
CAPACITY(AMP HOURS)(Note5)
OUTPUT
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
POWERFACTOR(Typ.)
INPUT
FUNCTION
ENVIRONMENT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
OVERTEMPERATURE
REMOTECONTROL (CN5)
SAFETY STANDARDS
HARMONICCURRENT
EMICONDUCTION&RADIATION
SAFETY &
EMSIMMUNITY
EMC
(Note4)
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
OVERLOAD
OVERVOLTAGE
REVERSEPOLARITY
SHORTCIRCUIT
PROTECTION
ACCURRENT (Typ.)
14.4V 28.8V
13.6V
20.85A
12.5A
Open&SealedLead Acid
80~200Ah
13~14.7V
27.2V
26~28.8V
10.5A
6.25A
40~125Ah
90~132VAC/180~264VACselectedbyswitch 248~370VDC
47~63Hz
85%
>0.65(withP type)at230VAC
6A/115VAC3A/230VAC
COLDSTART 60A
<3.5mA /240VAC
90~110%ratedoutputcurrent
Byinternalfuse
O/P Builtinfuse(FS100)toprotectshortcircuitcondition,shutdowno/pvoltageandcannotre-poweron
Protectiontype: Constantcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Shutdowno/pvoltage,re-powerontorecover
Protectiontype: Automaticallyderatechargecurrentuntilzero
Open:NormalworkShort:StopCharging
IEC60335-2-29CBapprovedby TUV(exceptfor48V),UL60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3(onlyP type)
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH
-10~+50 (Refertooutputloadderatingcurve)
20~90%RHnon-condensing
-40~+85 ,10~95%RH
0.05%/ (0~45 )
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
MTBF 115.8Khrsmin.MIL-HDBK-217F(25 )
253*135*48.5mm(L*W*H)
DIMENSIONOTHERS
NOTE
PACKING 1.45Kg;6pcs/9.7Kg/0.95CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
6. Test condition is at 25 , charging current will change under different temperature.
P
FileName:PB-300-SPEC2008-11-11
(P typeonly)(exceptfor48V)
86%
16~18V 31~35V
12:14.4V
24:28.8V
48:57.6V
PB-300 -48
57.6V
54.4V
52~58.6V
5.3A
3.2A
20~65Ah
59~64V
88%
300WSingleOutputBatteryCharger PB-300 series