Features
l
Photo IC for precision printing
Stable output versus laser power or temperature variations
l
S5049-02: For detection of high-speed, high power
laser beams
l
S5049-03: For detection of low power laser beams
Applications
l
Print start timing detection for laser printers, digital copiers,
fax machines, etc.
PHOTO IC
Photo IC for laser beam synchronous detection
Photo IC for start timing detection for precise printing
S5049 series
S5049 uses a dual-element PIN photodiode and compares the two photocurrent signals to maintain a highly stable output even when input laser
power or ambient temperature fluctuates. Two types of sensors are available to meet different operating conditions.
■ Absolute maximum ratings (Ta=25 °C, Vcc1=Vcc2=Vcc)
Parameter Symbol Value Unit
Supply voltage Vcc -0.5 to +7 V
Power dissipation *1P150 mW
Output voltage Vo -0.5 to Vcc V
Output current Io 20 mA
Ro1, Ro2 terminal current IRO 5mA
Operating temperature Topr -25 to +80 °C
Storage temperature Tstg -40 to +85 °C
Soldering -230 °C, 5 s -
*1: Derate power dissipation at a rate of 2 mW/°C above Ta=25 °C.
■ Electrical and optical characteristics (Ta=25
°
C,
λ
=780 nm, Vcc1=Vcc2=Vcc=5 V, Ro1=Ro2=5.1 k
Ω
, unless otherwise noted)
Parameter Symbol Condition Min. Typ.Max. Unit
Supply voltage Vcc 4.5 5.0 5.5 V
High level output voltage VOH Pin=0 4.9 - - V
Low level output voltage VOL Pin=200 µW, IOL=10 mA -0.40.6 V
Pin=0, at high level output -4.0 6.0 mA
Current consumption ICC Pin=200 µW, at low level output -6.0 9.0 mA
S5049-02 40 55 70 µW
Threshold input power PTH S5049-03 25 35 45 µW
H
→
L propagation delay time variation ∆tPHL - - ±10 ns
L
→
H propagation delay time variation ∆tPLH -±50 -ns
Rise time tr -60 180 ns
Fall time tf
Pin=200 µW at center
∆Pin=±10 % *2
RL=510 Ω, CL=15 pF -20100ns
*2: Beam diameter φ (1/e2) =100 µm, scan speed=0.5 mm/µs
Not including jitter caused by polygon mirror non-uniformity, etc.