Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. MOC205M, MOC206M, MOC207M, MOC211M, MOC212M, MOC213M, MOC216M, MOC217M 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Features Description * Closely Matched Current Transfer Ratios * Minimum BVCEO of 70 V Guaranteed - MOC205M, MOC206M, MOC207M * Minimum BVCEO of 30 V Guaranteed - MOC211M, MOC212M, MOC213M, MOC216M, MOC217M * Low LED Input Current Required for Easier Logic Interfacing - MOC216M, MOC217M * Convenient Plastic SOIC-8 Surface Mountable Package Style, with 0.050" Lead Spacing * Safety and Regulatory Approvals: - UL1577, 2,500 VACRMS for 1 Minute - DIN-EN/IEC60747-5-5, 565 V Peak Working Insulation Voltage These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package. They are ideally suited for high-density applications, and eliminate the need for through-the-board mounting. Applications * Feedback Control Circuits * Interfacing and Coupling Systems of Different Potentials and Impedances * General Purpose Switching Circuits * Monitor and Detection Circuits Schematic Package Outline ANODE 1 8 N/C CATHODE 2 7 BASE Figure 2. Package Outline N/C 3 6 COLLECTOR N/C 4 5 EMITTER Figure 1. Schematic (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler August 2015 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Characteristics I-IV < 150 VRMS Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage I-III < 300 VRMS Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol 175 Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 904 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1060 Vpeak VIORM Maximum Working Insulation Voltage 565 Vpeak VIOTM Highest Allowable Over-Voltage VPR DTI TS IS,INPUT Parameter 4000 Vpeak External Creepage 4 mm External Clearance 4 mm 0.4 mm Distance Through Insulation (Insulation Thickness) Case Temperature(1) Input Current(1) PS,OUTPUT Output Power(1) RIO Insulation Resistance at TS, VIO = 500 V(1) 150 C 200 mA 300 mW > 109 Note: 1. Safety limit values - maximum values allowed in the event of a failure. (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 2 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Rating Value Unit Storage Temperature -40 to +125 C TA Ambient Operating Temperature -40 to +100 C TJ Junction Temperature TOTAL DEVICE TSTG TSOL PD -40 to +125 C 260 for 10 seconds C Total Device Power Dissipation @ TA = 25C 240 mW Derate above 25C 2.94 mW/C Continuous Forward Current 60 mA Forward Current - Peak (PW = 100 s, 120 pps) 1.0 A Reverse Voltage 6.0 V Lead Solder Temperature EMITTER IF IF (pk) VR LED Power Dissipation @ TA = 25C 90 mW Derate above 25C 0.8 mW/C Continuous Collector Current 150 mA VCEO Collector-Emitter Voltage 30 V VECO Emitter-Collector Voltage 7 V Detector Power Dissipation @ TA = 25C 150 mW Derate above 25C 1.76 mW/C PD DETECTOR IC PD (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 3 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Absolute Maximum Ratings TA = 25C unless otherwise specified. Symbol Parameter Test Conditions Min. Typ. Max. Unit EMITTER Input Forward Voltage VF IR CIN MOC216M, MOC217M IF = 1 mA 1.07 1.3 V MOC205M, MOC206M, MOC207M MOC211M, MOC212M, MOC213M IF = 10 mA 1.15 1.5 V VR = 6 V 0.001 100 A Reverse Leakage Current Input Capacitance 18 pF DETECTOR ICEO1 ICEO2 Collector-Emitter Dark Current VCE = 10 V, TA = 25C 1.0 50 nA VCE = 10 V, TA = 100C 1.0 A Collector-Emitter Breakdown Voltage BVCEO MOC205M, MOC206M, MOC207M IC = 100 A 70 100 V MOC211M, MOC212M, MOC213M, MOC216M, MOC217M IC = 100 A 30 100 V BVCBO Collector-Base Breakdown Voltage IC = 10 A 70 120 V BVECO Emitter-Collector Breakdown Voltage IE = 100 A 7 10 V Collector-Emitter Capacitance f = 1.0 MHz, VCE = 0 7 pF CCE COUPLED Collector-Output Current CTR MOC205M IF = 10 mA, VCE = 10 V 40 80 % MOC206M IF = 10 mA, VCE = 10 V 63 125 % MOC207M IF = 10 mA, VCE = 10 V 100 200 % MOC211M IF = 10 mA, VCE = 10 V 20 % MOC212M IF = 10 mA, VCE = 10 V 50 % MOC213M IF = 10 mA, VCE = 10 V 100 % MOC216M IF = 1 mA, VCE = 5 V 50 % MOC217M IF = 1 mA, VCE = 5 V 100 % Collector-Emitter Saturation Voltage VCE(SAT) MOC205M, MOC206M, MOC207M MOC211M, MOC212M, MOC213M IC = 2 mA, IF = 10 mA 0.4 V MOC216M, MOC217M IC = 100 A, IF = 1 mA 0.4 V ton Turn-On Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 7.5 s toff Turn-Off Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 5.7 s tr Rise Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 3.2 s tf Fall Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 4.7 s (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 4 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Electrical Characteristics Symbol Characteristic Test Conditions VISO Input-Output Isolation Voltage t = 1 Minute CISO Isolation Capacitance VI-O = 0 V, f = 1 MHz RISO Isolation Resistance VI-O = 500 VDC, TA = 25C (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 Min. Typ. 2500 Unit VACRMS 0.2 1011 Max. pF www.fairchildsemi.com 5 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Isolation Characteristics 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1.7 VF - FORWARD VOLTAGE (V) 1.6 1.5 1.4 TA = -55C 1.3 1.2 TA = 25C 1.1 TA = 100C 1.0 1 10 100 VCE = 5 V NORMALIZED TO IF = 10 mA 1 0.1 IF - LED FORWARD CURRENT (mA) 0.01 Figure 3. LED Forward Voltage vs. Forward Current 0.1 1 10 100 IF - LED INPUT CURRENT (mA) Figure 4. Output Curent vs. Input Current 1.6 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1 NORMALIZED TO TA = 25C 0.1 -80 -60 -40 -20 0 20 40 60 80 100 1.4 1.2 1.0 0.8 0.6 0.4 0.2 I F = 10 mA NORMALIZED TO VCE = 5 V 0.0 0 120 1 2 3 4 5 6 7 8 9 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) TA - AMBIENT TEMPERATURE (C) Figure 5. Output Current vs. Ambient Temperature Figure 6. Output Current vs. Collector-Emitter Voltage 10000 0.9 VCE = 10 V 1000 IF = 20 mA 0.8 0.7 100 NORMALIZED CTR I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 1.0 10 IF = 10 m A 0.6 0.5 IF = 5 mA 0.4 0.3 0.2 1 VCE = 5 V, TA = 25C Normalized to: CTR at RBE = Open 0.1 0.0 0.1 10 0 20 40 60 80 1000 RBE - BASE RESISTANCE (k) TA - AMBIENT TEMPERATURE (C) Figure 8. CTR vs. RBE (Unsaturated) Figure 7. Dark Current vs. Ambient Temperature (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 100 100 www.fairchildsemi.com 6 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Typical Performance Curves 1.0 4.0 0.9 3.5 0.8 3.0 0.7 NORMALIZED ton NORMALIZED CTR IF = 20 mA IF = 10 m A 0.6 0.5 IF = 5 mA 0.4 0.3 VCC = 10 V IC = 2 mA RL = 100 NORMALIZED TO : ton AT RBE = OPEN 2.5 2.0 1.5 1.0 0.2 VCE = 0.3 V, TA = 25C Normalized to: CTR at RBE = Open 0.1 0.0 10 0.5 100 0.0 0.01 1000 0.1 RBE - BASE RESISTANCE (k) 1 10 100 RBE - BASE RESISTANCE (M) Figure 9. CTR vs. RBE (Saturated) Figure 10. Normalized ton vs. RBE 1.6 VCC = 10 V IC = 2 mA 1.4 RL = 100 NORMALIZED TO : tofff AT RBE = OPEN NORMALIZED tofff 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.01 0.1 1 10 100 RBE - BASE RESISTANCE (M) Figure 11. Normalized toff vs. RBE TEST CIRCUIT WAVEFORMS VCC = 10 V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Adjust IF to produce IC = 2 mA Figure 12. Switching Time Test Circuit and Waveforms (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 7 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Typical Performance Curves (Continued) MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 240 120 360 Time 25C to Peak Time (seconds) Figure 13. Reflow Profile Profile Freature Pb-Free Assembly Profile Temperature Minimum (Tsmin) 150C Temperature Maximum (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second maximum Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second maximum Time 25C to Peak Temperature (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 8 minutes maximum www.fairchildsemi.com 8 Part Number Package Packing Method MOC205M Small Outline 8-Pin Tube (100 Units) MOC205R2M Small Outline 8-Pin Tape and Reel (2500 Units) MOC205VM Small Outline 8-Pin, DIN EN/IEC60747-5-5 Option Tube (100 Units) MOC205R2VM Small Outline 8-Pin, DIN EN/IEC60747-5-5 Option Tape and Reel (2500 Units) Note: 2. The product orderable part number system listed in this table also applies to the MOC20XM and MOC21XM products. Marking Information 1 205 V X YY S 3 4 2 6 5 Figure 14. Top Mark Table 1. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 One-Digit Year Code, e.g., "4" 5 Digit Work Week, Ranging from "01" to "53" 6 Assembly Package Code (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 9 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Ordering Information(2) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com