09/2008 182
Ød±0.05 15≤p≤27.5 p = 37.5
0.8 1.0
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 34 5 678910 11 12 13 14
R 7 5 -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
2 = 230V L = 250V
Digit 5 Pitch:
I= 15mm; N = 22.5.mm;
R= 27.5mm; W =37.5mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics (0 to 9).
Digit 13 Internal use.
Digit 14 Capacitance tolerance: K=10%; M=20%
Tolerance ± 5% (J) available upon request
Table 1
Standard
packaging style
Lead
length
Taping style Ordering
code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
(Digit 10
to 11)
AMMO-PACK 12.70 215.0 DQ
AMMO-PACK 19.05 3 22.5 DQ
REEL Ø 355mm 12.70 215.0 GY
REEL Ø 500mm 12.70 215.0 CK
REEL Ø 500mm 19.05 3 22.5/27.5 CK
Loose, short leads 04+2 AA
Loose, long leads
(p≥15mm)
30+5
25+2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version.
R75 2 - R75 L
MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
Typical applications: This special release is specically
designed for application in series with the main (Capacitive
power supply), with particular protection against severe
ambient conditions.
BEST FITTING COMPONENTS IN TERMS
OF BOTH SIZE & PERFORMANCES
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L Digit 12: 0 to 9)
Pitch Box thickness Maximum dimensions (mm)
(mm) (mm) B max H max L max
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R75), dielectric
code (MKP), capacitance, tolerance, A.C. rated
voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16
single sided metallized
polypropylene lm
Winding scheme
09/2008
183
R75 2 - R75 L
MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L (Digit 12: 0 to 9)
Rated
Cap.
230Vac / 400Vdc*
Std dimensions
Max
dv/dt Max K0Part Number
BHLp (V/µs) (V2/µs)
0.033 µF4.0 9.0 13.0 10.0 1000 800 E3 R752F 2330--0--
0.100 µF6.0 12.0 13.0 10.0 1000 800 E3 R752F 3100--0--
0.082 µF5.0 11.0 18.0 15.0 700 560 E3 R752I 2820--0--
0.10 µF5.0 11.0 18.0 15.0 700 560 E3 R752I 3100--0--
0.15 µF6.0 12.0 18.0 15.0 700 560 E3 R752I 3150--0--
0.18 µF6.0 12.0 18.0 15.0 700 560 E3 R752I 3180--0--
0.22 µF 7.5 13.5 18.0 15.0 700 560 E3 R752I 3220--0--
0.27 µF 8.5 14.5 18.0 15.0 700 560 E3 R752I 3270--0--
0.33 µF 8.5 14.5 18.0 15.0 700 560 E3 R752I 3330--0--
0.47 µF10.0 16.0 18.0 15.0 700 560 E3 R752I 3470--0--
0.27 µF6.0 15.0 26.5 22.5 250 200 E3 R752N 3270--0--
0.33 µF6.0 15.0 26.5 22.5 250 200 E3 R752N 3330--0--
0.47 µF7.0 16.0 26.5 22.5 250 200 E3 R752N 3470--0--
0.56 µF 8.5 17.0 26.5 22.5 250 200 E3 R752N 3560--0--
0.68 µF10.0 18.5 26.5 22.5 250 200 E3 R752N 3680--0--
0.82 µF10.0 18.5 26.5 22.5 250 200 E3 R752N 3820--0--
1.0 µF11.0 20.0 26.5 22.5 250 200 E3 R752N 4100--0--
1.5 µF13.0 22.0 26.5 22.5 250 200 E3 R752N 4150--0--
0.47 µF9.0 17.0 32.0 27.5 130 104 E3 R752R 3470--0--
0.56 µF9.0 17.0 32.0 27.5 130 104 E3 R752R 3560--0--
0.68 µF9.0 17.0 32.0 27.5 130 104 E3 R752R 3680--0--
0.82 µF9.0 17.0 32.0 27.5 130 104 E3 R752R 3820--0--
1.0 µF11.0 20.0 32.0 27.5 130 104 E3 R752R 4100--0--
1.2 µF11.0 20.0 32.0 27.5 130 104 E3 R752R 4120--0--
1.5 µF13.0 22.0 32.0 27.5 130 104 E3 R752R 4150--0--
1.8 µF13.0 22.0 32.0 27.5 130 104 E3 R752R 4180--0--
2.2 µF14.0 28.0 32.0 27.5 130 104 E3 R752R 4220--0--
2.7 µF18.0 33.0 32.0 27.5 130 104 E3 R752R 4270--0--
3.3 µF18.0 33.0 32.0 27.5 130 104 E3 R752R 4330--0--
3.9 µF18.0 33.0 32.0 27.5 130 104 E3 R752R 4390--0--
4.7 µF22.0 37.0 32.0 27.5 130 104 E3 R752R 4470--0--
1.8 µF11.0 22.0 41.5 37.5 70 56 E3 R752W 4180--0--
2.2 µF13.0 24.0 41.5 37.5 70 56 E3 R752W 4220--0--
2.7 µF13.0 24.0 41.5 37.5 70 56 E3 R752W 4270--0--
3.3 µF16.0 28.5 41.5 37.5 70 56 E3 R752W 4330--0--
3.9 µF16.0 28.5 41.5 37.5 70 56 E3 R752W4390--0--
4.7 µF19.0 32.0 41.5 37.5 70 56 E3 R752W4470--0--
5.6 µF19.0 32.0 41.5 37.5 70 56 E3 R752W4560--0--
6.8 µF20.0 40.0 41.5 37.5 70 56 E3 R752W4680--0--
Rated
Cap.
250Vac / 560Vdc*
Std dimensions
Max
dv/dt Max K0Part Number
BHLp (V/µs) (V2/µs)
0.010 µF4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2100--0--
0.015 µF4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2150--0--
0.022 µF4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2220--0--
0.033 µF5.0 11.0 13.0 10.0 1500 168 E4 R75LF 2330--0--
0.047 µF5.0 11.0 13.0 10.0 1500 168 E4 R75LF 2470--0--
0.068 µF6.0 12.0 13.0 10.0 1500 168 E4 R75LF 2680--0--
0.056 µF5.0 11.0 18.0 15.0 900 101 E4 R75LI 2560--0--
0.068 µF5.0 11.0 18.0 15.0 900 101 E4 R75LI 2680--0--
0.082 µF5.0 11.0 18.0 15.0 900 101 E4 R75LI 2820--0--
0.10 µF6.0 12.0 18.0 15.0 900 101 E4 R75LI 3100--0--
0.15 µF 7.5 13.5 18.0 15.0 900 101 E4 R75LI 3150--0--
0.18 µF 7.5 13.5 18.0 15.0 900 101 E4 R75LI 3180--0--
0.22 µF 8.5 14.5 18.0 15.0 900 101 E4 R75LI 3220--0--
0.27 µF10.0 16.0 18.0 15.0 900 101 E4 R75LI 3270--0--
0.33 µF10.0 16.0 18.0 15.0 900 101 E4 R75LI 3330--0--
0.22 µF6.0 15.0 26.5 22.5 300 336 E3 R75LN 3220--0--
0.27 µF6.0 15.0 26.5 22.5 300 336 E3 R75LN 3270--0--
0.33 µF7.0 16.0 26.5 22.5 300 336 E3 R75LN 3330--0--
0.47 µF 8.5 17.0 26.5 22.5 300 336 E3 R75LN 3470--0--
0.56 µF10.0 18.5 26.5 22.5 300 336 E3 R75LN 3560--0--
0.68 µF11.0 20.0 26.5 22.5 300 336 E3 R75LN 3680--0--
0.82 µF11.0 20.0 26.5 22.5 300 336 E3 R75LN 3820--0--
1.0 µF13.0 22.0 26.5 22.5 300 336 E3 R75LN 4100--0--
0.33 µF9.0 17.0 32.0 27.5 150 168 E3 R75LR 3330--0--
0.39 µF9.0 17.0 32.0 27.5 150 168 E3 R75LR 3390--0--
0.47 µF9.0 17.0 32.0 27.5 150 168 E3 R75LR 3470--0--
0.56 µF9.0 17.0 32.0 27.5 150 168 E3 R75LR 3560--0--
0.68 µF11.0 20.0 32.0 27.5 150 168 E3 R75LR 3680--0--
0.82 µF11.0 20.0 32.0 27.5 150 168 E3 R75LR 3820--0--
1.0 µF13.0 22.0 32.0 27.5 150 168 E3 R75LR 4100--0--
1.2 µF13.0 22.0 32.0 27.5 150 168 E3 R75LR 4120--0--
1.5 µF13.0 25.0 32.0 27.5 150 168 E3 R75LR 4150--0--
1.8 µF18.0 33.0 32.0 27.5 150 168 E3 R75LR 4180--0--
2.2 µF18.0 33.0 32.0 27.5 150 168 E3 R75LR 4220--0--
2.7 µF18.0 33.0 32.0 27.5 150 168 E3 R75LR 4270--0--
3.3 µF22.0 37.0 32.0 27.5 150 168 E3 R75LR 4330--0--
3.9 µF22.0 37.0 32.0 27.5 150 168 E3 R75LR 4390--0--
1.2 µF11.0 22.0 41.5 37.5 90 101 E3 R75LW 4120--0--
1.5 µF13.0 24.0 41.5 37.5 90 101 E3 R75LW 4150--0--
1.8 µF13.0 24.0 41.5 37.5 90 101 E3 R75LW 4180--0--
2.2 µF16.0 28.5 41.5 37.5 90 101 E3 R75LW 4220--0--
2.7 µF16.0 28.5 41.5 37.5 90 101 E3 R75LW 4270--0--
3.3 µF19.0 32.0 41.5 37.5 90 101 E3 R75LW 4330--0--
3.9 µF19.0 32.0 41.5 37.5 90 101 E3 R75LW 4390--0--
4.7 µF20.0 40.0 41.5 37.5 90 101 E3 R75LW 4470--0--
5.6 µF20.0 40.0 41.5 37.5 90 101 E3 R75LW 4560--0--
6.8 µF24.0 44.0 41.5 37.5 90 101 E3 R75LW 4680--0--
8.2 µF24.0 44.0 41.5 37.5 90 101 E3 R75LW 4820--0--
10.0 µF30.0 45.0 41.5 37.5 90 101 E3 R75LW 5100--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
*Not suitable for EMI ltering applications.
Mechanical version and packaging (Table1)
Internal use
Tolerance: K (±10%); M (±20%)
E12 Series available upon request
09/2008 184
R75 2 - R75 L
MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L (Digit 12: 0 to 9)
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 230Vac (400Vdc) - 250Vac (560Vdc)
Rated temperature (TR):+85°C
Temperature derated voltage:
The following decreasing factor has to be applied on
the rated voltage:
+85°C to +105°C: 2.00% per °C for VR (d.c.)
+85°C to +105°C: 0.5% per °C for VR (a.c.)
Capacitance range: 0.056 µF to 10 µF.
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Total self-inductance (L): (Lead length ~2 mm)
Pitch (mm) 15 22.5 27.5 37.5
L (nH) ≈ 10 18 18 20
Dissipation factor (DF):
tgδx10-4 at +25°C±5°C
kHz C≤0.1µF0.1<C≤1.0µF 1<C≤3.3µF3.3<C≤10µF
1
10
100
≤04
≤06
≤25
≤5
≤8
≤6 ≤10
Insulation resistance:
Test conditions
Temperature: +25±C°5°C
Voltage charge time: 1min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ for C≤0.33µF (5x105 MΩ)*
≥30000 s for C >0.33µF (150000 s)*
* Typical value.
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
Surge test:
1500 Vpk (10 pulses) for 230Vac
1700 Vpk (10 pulses) for 250Vac
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Test conditions 2nd
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Voltage applied: VR
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Test conditions 3rd
Temperature: +85°C±2°C
Relative humidity (RH): 85% ±2%
Test duration: 250 h
Voltage applied: VR
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied: 1.25xVR
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF
≤10x10-4 at 01kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF
≤10x10-4 at 01kHz for C>1µF
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12
of DC lm capacitors catalogue)
Performance
Capacitance change |∆C/C|: ≤0.5%
