CLD-CT1084.005 PRODUCT FAMILY DATA SHEET Cree(R) PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW PRODUCT DESCRIPTION FEATURES SMD LEDs is packaged in the industry * Size (mm):3.2 x 2.8 standard package. These LEDs have * Color and Typical Dominant Wavelength: Red (624nm) Amber (591nm) high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these APPLICATIONS * Channel Letter * Architectural Lighting * Luminous Intensity (mcd) CLM1B-RKW:(450 - 1120) CLM1B-AKW:(450 - 1120) * Lead-Free * RoHS Compliant LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs WWW.CREE.COM/HB to mate with light pipes. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW ABSOLUTE MAXIMUM RATINGS (TA = 25C) Items Symbol Absolute Maximum Rating Unit RKW/AKW Forward Current IF 50 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +100 C Storage Temperature Tstg -40 ~ +100 C Junction Temperature TJ 110 C Junction/Ambient RTHJA 450 C/W Junction/Solder Point RTHJS 300 C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: Pulse width 0.1 msec, duty 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25C) Characteristics Color Symbol Condition Unit Forward Voltage RKW/AKW VF IF = 20 mA V Reverse Current RKW/AKW IR VR = 5 V A RKW D IF = 20 mA nm Dominant Wavelength Luminous Intensity Minimum Typical Maximum 2.1 2.6 618 624 630 596 10 AKW D IF = 20 mA nm 584 591 RKW IV IF = 20 mA mcd 450 650 AKW IV IF = 20 mA mcd 450 750 Note: Continuous reverse voltage can cause LED damage. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW INTENSITY BIN LIMIT (IF = 20 mA) Red(CLM1B-RKW) Amber (CLM1B-AKW) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Ua 450 560 Ua 450 560 Ub 560 710 Ub 560 710 Va 710 900 Va 710 900 Vb 900 1120 Vb 900 1120 Tolerance of measurement of luminous intensity is 10%. COLOR BIN LIMIT (IF = 20 mA) Red (CLM1B-RKW) Amber (CLM1B-AKW) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RA 618 630 A2 584 587 A3 587 590 A4 590 593 A5 593 596 Tolerance of measurement of dominant wavelength is 1 nm. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Red CLM1B-RKW-CUaVbAA3 450 1120 RA 618 RA 630 Red CLM1B-RKW-CUbVbAA3 560 1120 RA 618 RA 630 Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Amber CLM1B-AKW-CUaVb253 450 1120 A2 584 A5 596 Amber CLM1B-AKW-CUbVb353 560 1120 A3 587 A5 596 Amber CLM1B-AKW-CVaVb353 710 1120 A3 587 A5 596 Luminous Intensity (mcd) Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the "Cree LED Lamp Reliability Test Standards" document #1 for reliability test conditions. 3. Please refer to the "Cree LED Lamp Soldering & Handling" document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW GRAPHS (RELATIVE LUMINOUS INTENSITY) IF (mA) 100.0 5.0 80.0 4.0 Red 60.0 3.0 Red Amber 40.0 2.0 Amber 20.0 1.0 0.0 1.8 VF(V) 2.0 2.2 2.4 2.6 2.8 -60 -50 -40 -30 -20 0.0 40 20 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. Vr(V) 0.0 (RELATIVE LUMINOUS INTENSITY) -10 0 100% -10 80% -20 60% -30 40% -40 20% Amber -50 Ir(uA) FIG.3 RED&AMBER REVERSE CURRENT VS. REVERSE VOLTAGE. 0% 300 500 400 Red 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. (RELATIVE LUMINOUS INTENSITY) IF(mA) 1.0 100 80 60 Rth j-s=300 C/W 0.5 40 Rth j-a=450 C/W 20 0 0 20 40 60 80 Ta( C) 100 FIG.5 RED&AMBER MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 -90 Angle -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW REFLOW SOLDERING * * * The CLM1B-RKW/CLM1B-AKW is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLM1B-RKW/CLM1B-AKW Solder = Sn63-Pb37 Solder = Lead-free Solder Average ramp-up rate = 4C/s max. Average ramp-up rate = 4C/s max Preheat temperature = 150C ~200C Preheat temperature = 100C ~150C Preheat temperature = 150C ~200C Preheat 100s Preheat time = time 120s = max Preheat time = 100s max. Average ramp-up rate = 4C/s max max. Ramp-down rate = 6C/s Ramp-down rate =max 6C/s max. Peak temperature = 235C=max Peak temperature 230C Ramp-down rate = 6C/s max. max. Peak temperature = 250C max. Time within 5C of actual Peak Temperature = 10s max Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 45s max Duration above 183C is 80s max. Only use LP6-NPP1-01-N1 Time within 5C of actual Peak Temperature = 10s max. Duration above 217C is 80s max. [13] Solder = Low Lead-free Average ramp-up rate = 3C/s max. Preheat temperature = 130C ~170C Preheat time = 120s max. Ramp-down rate = 6C/s max. Peak temperature = 213C max. Time within 3C of actual Peak Temperature = 25s max. Duration above 200C is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details. 7.0 Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 8 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW Document No.: CREE-05-005 Rev. NO. : 16 NOTES * pick up SMD products during the process of SMT production . If handling is necessary, it should take careful to pick up these The following twoismethods necessary : The packaging sizes of these SMD products areproducts. very small and the resin still softare after solidification. Users are required to handle with care. Never touch the resin surface of SMD products. * To avoid damaging the product's surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method necessary: Fig. 1a:isFor Small Top SMD Fig. 1b: For Mini side 0.8mm SMD For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products figure size for reference : a.) Circular Nozzle: inner diameter: O1.8mm+/-0.05mm, outer diameter: O2.3mm+/-0.05mm. b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED. Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of S All devices, equipment and machinery must be properly grounded. It is recommended to perform electrical test to screen out ESD failures at final inspection. It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED applicatio current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree PLCC2 1 in 1 SMD LED CLM1B-RKW/AKW PACKAGING * * * * * The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. H UMIC HECK w ww .vit ap ac .c om Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10