A Business Partner of Renesas Electronics Corporation. Data Sheet PH5504A2NA1 R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Ambient Light Sensor DESCRIPTION ED The PH5504A2NA1 is an ambient light sensor with a photo diode and current amplifier. This product has spectral characteristics close to human eye sensitivity and outputs light current proportional to the ambient brightness. The PH5504A2NA1 can be used to improve the performance and reduce the power consumption of digital equipment such as FPD-TV sets and mobile phones, by enabling automatic brightness control and automatic switching on and off of lighting systems. FEATURES IN U * * * * * * Small and thin SON package 2.55 x 1.56 x 0.55 mm Spectral characteristics close to human eye sensitivity Peak sensitivity wavelength 530 nm TYP. The impact of infrared light can be reduced by incorporating infrared light correction circuits. Output characteristics proportional to illuminance Output light current 55 A TYP.@100 lx (Fluorescent light) Reduced variation of output current among light sources Low voltage operation VCC = 1.8 to 5.5 V Pb-free APPLICATIONS SC O FPD TV sets, displays Mobile phones, smartphones Notebook PCs, tablet PCs DSCs, DVCs FA equipment Lighting systems, etc. DI * * * * * * NT * * R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 1 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title PACKAGE DIMENSIONS (UNIT: mm) TOP VIEW 2.550.2 6 2 5 3 4 IN U 0.2 ED 1 0.5 0.22 1.560.15 0.2 2.25 Remark Pin 1 is distinguishable by the shape of the lead frame. NT 0.55 SIDE VIEW BOTTOM VIEW SC O (0.25) Remark ( ) indicates nominal dimensions. Terminal OUT GND VCC NC NC NC DI Pin No. 1 2 3 4 5 6 Remark 1. Connect all the NC terminals to GND or VCC. 2. The bypass capacitor between VCC and GND is to be mounted within 20 mm of the package body. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 2 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title BLOCK DIAGRAM VCC Light Source ED OUT IN U GND MARKING EXAMPLE (Bottom View) Assembly code NT 1 pin 04 SC O Product code ORDERING INFORMATION Part Number Order Number Packing Style Embossed Tape 5 000 pcs/reel DI Solder Plating Specification PH5504A2NA1-E4 PH5504A2NA1-E4-Y-A Pb-Free R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 3 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Note: Symbol VCC IO PD Topt Tstg Ratings 6 5 135 -30 to +85 -40 to +100 Unit V mA mW C C *1. Mounted on glass epoxy board (18 mm x 13 mm x t0.8 mm) RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Symbol VCC MIN. 1.8 TYP. 3.0 Parameter Supply Current *1 Peak Sensitivity Wavelength Light Current *1 IO0 IO1 - VO Conditions EV = 100 lx *2 - MIN. - - TYP. 63 530 MAX. - - Unit A nm EV = 0 lx EV = 100 lx *2 EV = 100 lx - 44 - - 55 1 0.2 66 - A A Multiple *2 EV = 100 lx, RL = 150 k *5 RL = 5 k 2.6 - - - - 2.9 80 140 250 5 - - - - - V s s s s NT Sensitivity Ratio of Fluorescent/Incandescent Saturation Output Voltage *3 Switching Rise Time Time *4 Fall Time Delay Time Storage Time tr tf td ts *1 Measured under load resistance conditions of an output current unsaturated *2 Fluorescent light *3 Saturation output voltage measurement method: SC O Note: Symbol ICC p Unit V IN U ELECTRO-OPTICAL CHARACTERISTICS (TA = 25C, VCC = 3.0 V, unless otherwise specified) MAX. 5.5 ED Parameter Supply Voltage Light Current Power Dissipation *1 Operating Temperature Storage Temperature VCC VCC Light Source PH5504A OUT RL DI GND VCC VO Illuminance (lx) R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 4 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title *4 Switching Time Pulse input VCC VCC OUT PH5504A ED RL GND IN U Input 90% Output 10% td ts tr tf DI SC O NT *5 White LED R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 5 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title TYPICAL CHARACTERISTICS (TA = 25C, VCC = 3.0 V, unless otherwise specified) SPECTRAL SENSITIVITY CHARACTERISTICS LIGHT SOURCE SENSITIVITY VARIATION 1.1 1 Fluorescent light 0.8 Incandescent light Ratio 0.7 0.6 Halogen light 0.5 0.4 Krypton light 0.3 0.2 Wavelength (nm) 0.5 1 1.5 2 DIRECTIONAL CHARACTERISTICS 2 1.2 1.2 1 1 0.8 Ratio NT 0.8 Ratio 0 Ratio DIRECTIONAL CHARACTERISTICS 1 0.6 1 pin 0.4 - 0.6 1 pin 0.4 + - + 0.2 0.2 -60 -30 0 30 60 SC O 0 -90 White LED IN U 0.1 0 300 400 500 600 700 800 900 1 000 1 100 1 200 ED 0.9 90 Angle (deg.) 0 -90 -60 -30 0 30 60 90 Angle (deg.) DI Remark The graphs indicate nominal characteristics. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 6 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 0 lx LIGHT CURRENT vs. ILLUMINANCE 1 10 000 1 000 0.1 10 ED IO0 (A) IO1 (A) 100 0.01 1 0.1 0.01 0.01 0.1 1 10 100 0.001 -40 1 000 10 000 -20 0 60 80 100 VCC DEPENDENCY OF LIGHT CURRENT AT 100 lx (NORMALIZED AT VCC = 3 V) IN U TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 100 lx (NORMALIZED AT 25C) 1.4 1.4 1.2 1.2 1 1 Ratio 0.8 0.6 0.8 0.6 0.4 0.4 NT Ratio 40 Temperature (C) Illuminance (lx) 0.2 0.2 0 -40 20 -20 0 20 40 60 80 100 Temperature (C) 0 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VCC (V) DI SC O Remark The graphs indicate nominal characteristics. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 7 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title RECOMMENDED OPTICAL LAYOUT (UNIT: mm) 1 pin It is recommended to position the sensor so that light hits a circular area (shown by the dotted line) with a radius of 2.5 mm (diameter of 5 mm) from the center of the package. Light detecting area (0.54 x 0.18 mm) ED Offset 0.14 0.78 1.275 0.78 1.275 DI SC O NT IN U Recommended area for light to hit (2.5 mm radius) R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 8 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title TAPING SPECIFICATIONS (UNIT: mm) 1.750.1 Outline and Dimensions (Tape) ED 0.20.05 2.9 3.50.05 2.00.1 8.00.2 4.00.1 1.5 +0.1 -0 1.050.05 IN U 4.00.1 1.95 0.780.05 0.780.05 Tape Direction Direction of feed Carrier tape Perforation Product Pin 1 NT Product Cover tape SC O Outline and Dimensions (Reel) 1 2 D DI C R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 B A E W Symbol Dimensions (mm) Symbol Dimensions (mm) A 180 +0 -1.5 C 130.2 B 60 +1 -0 D 2.00.5 9.0 +1 -0 E 21.00.8 1 90 2 120 W Page 9 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title 0.5 0.5 ED 0.24 0.55 IN U 1.85 0.22 0.22 0.5 0.5 0.24 0.22 0.22 RECOMMENDED MOUNT PAD DIMENSIONS (Unit: mm) DI SC O NT Remark All dimensions in this figure must be evaluated before use. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 Page 10 of 11 A Business Partner of Renesas Electronics Corporation. PH5504A2NA1 Chapter Title NOTES ON HANDLING 1. Recommended reflow soldering conditions (including infrared reflow, convection reflow, and infrared + convection reflow) ED (1) This product is dry-packed with desiccant in order to avoid moisture absorption. (2) After breaking the seal, reflow soldering must be done within 168 hours under the recommended temperature profile shown below. (3) If more than 168 hours have passed after breaking the seal, the baking process must be done by using a tape and reel. Baking conditions: Once, with tape and reel, 605C, 10 to 24 hours After the baking process, this product must be stored under conditions of 30C or below, 70% RH or below, and reflow soldering must be done within 168 hours. < Storage conditions after breaking seal > * Storage conditions * Maximum storage period after breaking seal IN U : 30C or below, 70% RH or below : 168 hours (Second reflow soldering must be completed within 168 hours.) NT < Reflow soldering conditions > * Peak reflow temperature : 260C or below (Package surface temperature) * Maximum number of reflows :2 * No repair by hand soldering * Maximum chlorine content of rosin flux (percentage mass) : 0.2% or less Recommended Temperature Profile of Reflow Peak Temperature 260C MAX. SC O 255C Ramp-down rate 6C/s MAX. 220C 200C 150C DI Package Surface Temperature Ramp-up rate 3C/s MAX. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 60 to 120 s 30 s or less 60 s or less Time 8 min. MAX. Page 11 of 11 Revision History PH5504A2NA1 Data Sheet Rev. Date Page 1.00 Nov 05, 2012 - Description Summary DI SC O NT IN U ED First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1