GiGuard(R) - ESD Protection for High Speed Circuits AVX Bi-directional Leadless Transient Voltage Suppressor Diodes Provid ESD Protection for High SPeed Communication and Data Lines GENERAL DESCRIPTION Utilizing the latest in TVS Technology combined with a unique leadless package, the new GiGuard series of ESD Suppression Diodes offers Clamping Voltages below 12v and cap values as low as 0.3pfd. This combination of excellence both protects sensitive ICs during ESD events and preserves the integrity of the protected high speed signals. The AVX GG(R) series fits perfectly onto the same PCB solder pads as standard EIA 0201/0402 components. The GG(R) series complies with IEC 61000-4-2(ESD), Level 4+ (20kV air, 20kV contact discharge), IEC 61000-4-4 (electrical fast transient -EFT) (20A, 5/50 ns), very fast charged device model (CDM) ESD and cable discharge event (CDE). APPLICATIONS FEATURES * * * * * * * * * * * USB 2.0/3.0 Tablets/Cell Phones Touch Screens Network Communications Gigabyte Ethernet High Def Multimedia Interface (HDMI) Mobile Phone Touchscreen HOW TO ORDER CIRCUIT DIAGRAM Low Capacitance (.3pF to 17pF typ) Low Vc (<12v @ 1a) Bi-Directional protection Leadless 0201/0402 case size -55C ~ 125C Operating Range GG 0201 05 100 N 2 P Series Finsih Case Size P = 100% Tin Packaging 0201 0402 0603 2 = 7" Reel 0201= 15K/Reel 0402 = 10K/Reel Voltage Rating 03 = 3.3V 05 = 5.0V 06 = 6.5V Cap Tolerance 07 = 7.0V 12 = 12V 4 = 2pF C = .25pF N = 30% Nominal Cap 0R3 = 0.3pF 2R5 = 2.5pF 5R0 = 5.0pF 100 = 10pF 170 = 17pF CHARACTERISTIC TEST DESCRIPTION Characteristic Test Description Symbol Units Symbol Units Vwrm V Max Clamp Voltage @ Ipp = 16a V Reverse Min. Breakdown Voltage @ 1ma Vbr V Vc16a Max ESD Clamp Voltage @ 8KV V Reverse Leakage Current @Vwrm IL ua Vc8k Max Clamp Voltage @ Ipp = 1a V Peak Pulse Power (tp=8x20us) Ppp W Vc Max Clamp Voltage @ Ipp V Peak Pulse Current (tp=8x20us) Ipp A VcIpp Nominal Capacitance (Vr=0v, f=1Mhz) pF ESD Rating - Air (150pf, 330 network) Vair KV Cnom Vcon KV Cap (pF) min-max ESD Rating - Contact (150pf, 330 network) Nominal Reverse Working Voltage Characteristic Test Description Allowable Capacitance Range The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 112320 1 GiGuard(R) - ESD Protection for High Speed Circuits AVX Bi-directional Leadless Transient Voltage Suppressor Diodes Provid ESD Protection for High SPeed Communication and Data Lines GENERAL ELECTRICAL CHARACTERISTICS AVX Part Number Vrwv (V) Cnom (pF) Cap Min (pf) Cap Max (pF) Vbr Min (V) IL (a) Vc (@Ipp=1a, tp=8x20ns) (V) Ipp (A) Vc (@Ipp, tp=8x20ns) (V) Ppp (W) Vair (KV) Vcon (KV) Vc (@8KV) (V) Pack QTY GG020103100N2P 3.3 10.0 7 13 4.0 <0 .1 6 7 10 70.0 20 20 12 15000 GG020105100N2P 5.0 10.0 7 13.0 5.5 <0 .1 8 6 12 60.0 20 20 12 15000 GG0201052R542P 5.0 2.5 0.5 4.5 6.7 <0 .1 12 3 15 46.0 20 15 16 15000 GG040203100N2P 3.3 10.0 7 13 4.0 <0 .1 6 8 10 80.0 30 30 10 10000 GG0402052R542P 5.0 2.5 0.5 4.5 5.5 <0 .1 12 3 15.5 46.0 15 15 16 10000 GG0402055R042P 5.0 5.0 3 7.0 5.2 <0 .1 12 4 16 60.0 15 15 15 10000 GG040205100N2P 5.0 10.0 7 13.0 5.5 <0 .1 8 8 12 96.0 25 25 12 10000 10000 GG040205170N2P 5.0 17.0 11.9 22.0 5.1 <0 .1 6.5 8 10 80.0 30 30 12 GG040205320M2P 5.0 32.0 25.6 38.4 6 <0 .1 7 18 11 200.0 30 30 11 10000 GG040207100N2P 7.0 10.0 7 13 9.0 <0 .1 10 6 12 72.0 30 30 13 10000 10000 GG0402126R042P 12.0 6.0 4 8 18.0 <0 .1 18 6 22 130.0 25 25 22 GG060303100N2P 3.3 10.0 7 13 3.4 <0 .1 6 8 10 80.0 30 30 10 5000 GG0603052R542P 5.0 2.5 0.5 4.5 6.7 <0 .1 12 3 15 45.0 15 15 16 5000 GG060305100N2P 5.0 10.0 7 13 7.5 <0 .1 8 8 12 96.0 25 25 12 5000 Ipp (A) Vc (@Ipp, tp=8x20ns) (V) Ppp (W) Vair (KV) Vcon (KV) Vc (@8KV) (V) Pack QTY HIGH POWER ELECTRICAL CHARACTERISTICS AVX Part Number Vrwv (V) Cnom (pF) Cap Min (pf) Cap Max (pF) Vbr Min (V) IL (a) Vc (@Ipp=1a, tp=8x20ns) (V) GG0402050R8L2P 5.0 0.8 0.5 2.5 8.0 <0 .1 9 7 15 100 30 30 13 10000 GG0402051R5L2P 5.0 1.5 0.5 2.5 8.0 <0 .1 9 15 20 300 30 30 12 10000 Cap Max (pF) Vbr Min (V) IL (a) Vc (@Ipp=1a, tp=8x20ns) (V) Ipp (A) Vc (@Ipp, tp=8x20ns) (V) Ppp (W) Vair (KV) Vcon (KV) Vc (@8KV) (V) Pack QTY LOW CAP ELECTRICAL CHARACTERISTICS 2 AVX Part Number Vrwv (V) Cnom (pF) Cap Min (pf) GG0201050R3C2P 5.0 0.3 0.15 0.55 8.0 <0 .1 15 3 20 60.0 20 20 30 15000 GG0402050R4C2P 5.0 0.35 0.15 0.65 8.5 <0 .1 10 4 12 60.0 20 20 15 10000 GG0402050R3C2P 5.0 0.3 0.15 0.55 7.0 <0 .1 12 3 15.5 54.0 20 20 30 10000 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 112320 GiGuard(R) - ESD Protection for High Speed Circuits Characteristic Curves - Types GG020105100N2P (10PF) GG0402060R3C2P (0.3PF) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 3 GiGuard(R) - ESD Protection for High Speed Circuits Characteristic Curves - Types GG0402052R542P (2.5PF) GG0402055R042P (5.0PF) 4 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 101320 GiGuard(R) - ESD Protection for High Speed Circuits Characteristic Curves - Types GGS040205100N2P (10PF) GG040205170N2P (17PF) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 101320 5 GiGuard(R) - ESD Protection for High Speed Circuits TEMPERATURE DERATING DIMENSIONS RECOMMENDED REFLOW SOLDER PAD L D t A T C B A mm (inches) Size Length (L) Width (W) Thick (T) Termination (t) 0201 0.60 0.03 (0.024 0.001) 0.30 0.03 (0.012 0.001) 0.30 0.03 (0.012 0.001) 0.15 0.05 (0.006 0.002) 1.00 0.05 (0.039 0.002) 0402 0.60 0.05 (0.024 0.002) 0.50 0.05 (0.020 0.002) mm (inches) 0.20 0.05 (0.008 0.002) RECOMMENDED SOLDER REFLOW PROFILES Recommended Reflow Profiles Component Temperature / C 275 Pb Free Recommended 250 A B C D 0201 0.25 0.05 (0.010 0.002) 0.30 0.05 (0.012 0.002) 0.80 0.15 (0.031 0.006) 0.275 0.025 (0.011 0.001) 0402 0.61 0.05 (0.024 0.002) 0.51 0.05 (0.020 0.002) 1.70 0.05 (0.067 0.002) 0.51 0.05 (0.020 0.002) RECOMMENDED SOLDERING CONDITION 1 Pb Free Max with care 1. Solder: 0.12~0.18mm Thread solder (Sn96.5:Ag3.5) with soldering flux in the core Rosin-based and non-activated flux is recommended. 2. Preheating: The Devices shall be preheated so that Temperature Gradient between the devices and the tip of soldering iron is 150 or below. 3. Soldering Iron: Rated Power of 20w max with 3mm soldering tip in diameter. Temperature of soldering iron tip 300Cmax, 3-5sec (The required amount of solder shall be melted in advance on the soldering tip.) 4. Cooling: After soldering. The Devices shall be cooled gradually at room ambient temperature. Sn Pb Recommended 225 200 175 150 125 100 75 50 25 02 04 06 08 0 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 420 Hand Soldering Cautions Time / secs In hand soldering of the Devices. Large temperature gradient between preheated the Devices and the tip of soldering iron may cause electrical failures and mechanical damages such as cracking or breaking of the devices. The soldering shall be carefully controlled and carried out so that the temperature gradient is kept minimum with following recommended conditions for hand soldering. 6 Size RECOMMENDED SOLDERING CONDITION 2 - WITHOUT PREHEATING 1. Temperature of soldering iron tip 300C max, 3-5sec. 2. Solder iron tip shall not directly touch to Devices. 3. Solder iron tip shall be fully preheated before soldering while soldering iron tip to the external electrode of Devices. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 101320 GiGuard(R) - ESD Protection for High Speed Circuits PACKAGING SPECIFICAION * Carrier tape and transparent cover tape should be heat-sealed to carry the products, and the reel should be used to reel the carrier tape. * The adhesion of the heat-sealed cover tape shall be 25~60 grams with nominal of 40 grams. * Both the head and the end portion of the taping shall be empty for reel package and SMT auto-pickup machine. And a normal paper tape shall be connected in the head of taping for the operator to handle. mm (inches) Case Size A0 0.05 (0.002) B0 0.05 (0.002) K0 0.05 (0.002) D +0.10 (0.004) -0.05 (0.002) P 0.10 (0.004) P2 0.10 (0.004) P0 0.10 (0.004) W 0.10 (0.004) E 0.10 (0.004) F 0.05 (0.002) Qty 0201 0.37 (0.015) 0.67 (0.026) 0.50 (0.020) 1.50 (0.059) 2.00 (0.079) 2.00 (0.079) 4.00 (0.157) 8.00 (0.315) 1.75 (0.069) 3.50 (0.138) 15K 0402 0.70 (0.028) 1.12 (0.044) 0.60 (0.024) 1.55 (0.061) 2.00 (0.079) 2.00 (0.079) 4.00 (0.157) 8.00 (0.315) 1.75 (0.069) 3.50 (0.138) 10k REEL DIMENSIONS mm (inches) Reel Size A B C D E W W1 7" 178.0 1.0 (7.008 0.039) 60.0 0.5 (2.362 0.020) 13.0 0.2 (0.512 0.008) 21.0 0.2 (0.827 0.008) 2.0 0.5 (0.079 0.020) 9.0 0.50 (0.354 0.020) 1.5 0.15 (0.059 0.006) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 101320 7