12-092-14
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011
www.amphenol-aerospace.com
MIL-DTL-38999, Series III
• Aluminum
• Stainless Steel/Firewall
• Composite
• Clutch-Lok® High Vibration
Amphenol Tri-Start
Subminiature Cylindrical Connectors
®TM
Table of Contents Page No.
Series III - The Highest Performance MIL-DTL-38999 Connector ...................... 1
Tri-Start Series III Versatility and Options ........................................................... 2
Shell Styles and Key Design Features............................................................... 3
Test Data .......................................................................................................... 4
Specifications.................................................................................................... 5
Insert Availability and Identification ................................................................ 6, 7
Alternate Positioning .......................................................................................... 8
Insert Arrangements ................................................................................... 9-15
Crimp
TVP00R/CTVP00R Wall Mounting Receptacle .......................................... 16
TVP02R/CTVP02R Box Mounting Receptacle .......................................... 17
TV06R/CTV06R Straight Plug ................................................................... 18
TV26/MTV26 CLUTCH-LOK® Straight Plug.............................................. 19
TV07R/CTV07R Jam Nut Receptacle ....................................................... 20
TV01R/CTV01R Line Receptacle.............................................................. 21
TV09R Flange Mounting Plug.................................................................... 22
Hermetic
TVPS02Y Box Mounting Receptacle ......................................................... 23
TVS07Y Jam Nut Receptacle ................................................................... 24
TVSIY Solder Mounting Receptacle .......................................................... 25
TVSHIY Weld Mounting Recepacle ........................................................... 26
Fail Safe, Lanyard Release
Design Features, Types............................................................................ 27
D38999/29, D38999/30 Lanyard Release Plug ..................................... 28-30
D38999/31 TV Fail Safe Lanyard Release Plug for MIL-STD-1760 .......31, 32
Accessories for Lanyard Release Connectors.......................................... 33
Accessories
Receptacle Protection Caps ..................................................................... 34
Plug Protection Caps ................................................................................ 35
Dummy Receptacles ................................................................................ 36
Cable Clamps ........................................................................................... 37
Universal Header Assembly for Flex Print or PC Board Connectors ....38, 39
Contacts, Sealing Plugs, Plastic/Metal Protection Caps ................................... 40
Contacts (Printed Circuit Board, Wire wrap) .................................................... 41
Application Tools.............................................................................................. 42
How to Order
Amphenol® TV, Metal and Amphenol® TV26 CLUTCH-LOK® ................... 43
D38999, TV Military, Metal and MTV26 CLUTCH-LOK® ............................ 44
Amphenol® CTV, Composite..................................................................... 45
D38999, CTV Military, Composite.............................................................. 46
Composite Weight Comparisons ..................................................................... 47
Specials (Fiber Optics, Filter Protection, Flex Assemblies,
PCB Applications) ..................................................................................... 48
Specials (Coax, Twinax, Triax Contacts, Ground Plane Connectors,
Press Fit Connectors) ............................................................................. 49
Specials (Quadrax Contacts)......................................................................... 50
Specials (Deep Reach Shells, Stand-off Flange Shells, Connectors with
Integral Strain Reliefs, ESD Protection, RJ Field Connectors .................. 51
Sales Office and Distributor Listing ................................................................ 52
For additional information concerning Amphenol Tri-Start Connectors, or if there
are special application requirements, contact your local sales office or
Amphenol Aerospace
40-60 Delaware Ave.
Sidney, New York 13838-1395
Phone: 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol Aerospace is a Certified ISO9001 Manufacturer.
1
Amphenol® Tri-Star t
Series III - the highest performance
MIL-DTL-38999 connector
Tri-StartTM MIL-DTL-38999 Series III
with Metal Shells - Aluminum, Stainless Steel, Class K Firewall
Composite Tri-Start,
Qualified to MIL-DTL-38999, Rev. J
Amphenol ® Tri-Start MIL-DTL-38999* Series III Connectors
offer the highest performance capabilities for both general
duty and severe environment applications. Meeting or ex-
ceeding MIL-DTL-38999 Series III requirements, the Tri-Start
connector with standard metal shells (aluminum or stain-
less steel with several finish options) offers these features:
• EMI Shielding - solid metal to metal coupling, grounding
fingers, electroless nickel plating, and thicker wall sections
provide superior EMI shielding capability of 65dB minimum
at 10 GHz
•Contact Protection - recessed pins in this 100% scoop-
proof connector minimize potential contact damage
•Moisture Resistance - improved interfacial seal design
helps prevent electrolytic erosion of contacts
•Corrosion Resistance - shells of stainless steel or
cadmium over nickel plating withstand a 500 hour salt spray
exposure
•Vibration/Shock - operates under severe high temperature
vibration, through 200°C
•Firewall Capability - available in a stainless steel shell,
class RK, RS
•Lockwiring Eliminated - unique, self-locking, quick
coupling connector eliminates lockwiring
•Quick Coupling - completely mates and self-locks in a
360° turn of the coupling nut
•Inventory Support Commonality - uses standard MIL-
DTL-38999 contacts, application tools, insert arrangements
•Electrostatic Discharge Protection (ESD) - protection for
sensitive circuitry without diodes, varistors, etc., with the
use of the Faraday Cage principal which shunts high
voltage, high current discharge events (see page 51)
•Ground Plane Connectors - with metallic insert for
common grounding of coax, triax or twinax contact outer
shield (see page 49)
•Hermetic- air leakage limited to 1 X 10-7 cm3 per second
optional
MIL-Qualified to MIL-DTL-38999, Rev. K, the Amphe-
nol® Composite Tri-Start Connector offers a lightweight,
corrosion resistant connector with the same high
performance features as its metal counterpart. The
Composite Tri-Start Connector also includes the fol-
lowing features:
• Lightweight - 17% – 70% weight savings
(17–40% weight savings vs. aluminum)
(60–70% weight savings vs. stainless steel)
See Composite weight comparison chart, pg. 47.
•Corrosion Resistance - available in standard MIL-
DTL-38999 olive drab cadmium (175°C) and electro-
less nickel plating (200°C), both withstanding 2000
hours of salt spray exposure. The base material is
able to withstand an indefinite exposure to salt spray.
•Durability - 1500 couplings minimum (in reference to
connector couplings, not contacts)
•Extended Life Contact - Mil-approved plating
process which provides 1500 couplings minimum
The latest offering from Amphenol in MIL-DTL-38999,
the CLUTCH-LOK connector offers:
All advantages of stainless steel/Class K firewall Tri-
Start connectors plus a unique clutch design that
actually tightens itself under vibration.
Features include:
• High degree of differential torque
• No settling back to the next ratchet tooth
• Completely intermateable with all existing
MIL-DTL-38999 Series III connectors
• Offers advantage in inaccessible, hard to reach
areas where mating torque is difficult to apply and
complete coupling is not verifiable by inspection
See page 19 for description, 43 and 44 for ordering.
CLUTCH-LOKTM MIL-DTL-38999 Series III
High Vibration Connector
* MIL-DTL-38999 Series III supersedes MIL-C-38999 Series III.
2
Amphenol® Tri-Start
offers more versatility & options
than any other interconnection family
Fiber Optic Multi-Channel D38999
Filter/Transient
Protection
MIL-DTL-38999 Series III
D38999 Ground Plane with
Metallic Insert, Power
Contacts and
Shielded Twinax
Contacts
MIL-DTL-38999 with
Shielded Coax Contacts
D38999 with PC Tail
Coax Contacts and
Alignment Disc
D38999 with Flex
Termination for
Attachment to PCB
Boards
MIL-DTL-38999 Lanyard
“Breakaway” Connector
Qualified for MIL-STD-1760
Hermetic Tri-Start
MIL-DTL-38999 Series III
The Tri-Start Connector is the high performance choice
in the D38999 Family.
Originally designed in order to increase the performance lev-
els of MIL-DTL-38999 Series I and II, the Series III was cre-
ated to meet high performance connector criteria.
Dynamic features for performance and reliability that were
needed for military, aerospace and ground vehicle applica-
tions were designed into the Series III that include:
• Rapid coupling via a triple-start thread
• Shell-to-shell or metal-to-metal bottoming
• Improved EMI shielding
The Tri-Start Family of connectors has grown and expanded
since its original addition to the 38999 series in order to meet
ever-evolving interconnection product needs. Today, the Tri-
Start family has styles and options that cover a very wide
range to meet not only the highest performance needs of
space applications, but also general duty connector needs.
The Tri-Start Connector Series is second to none in
terms of versatility and customer options.
The broad porfolio includes Tri-Starts with:
• Aluminum and nickel plated stainless steel shells
• Class K Firewalls
• Composite shells
• Clutch-Lok® high vibration design
• Fiber Optics
• Fail-Safe Lanyard Release connectors
• Variety of contact options: shielded, coax, matched imped-
ance coax, triax, twinax, quadrax, thermocouple, PCB tail and
wire wrap
• Ground plane versions and Press-fit® with compliant pins
• ESD (Electrostatic Discharge) protection
• Filter/Transient protection
• Hermetic versions
• Long reach receptacle styles
• Numerous shell geometries,
finishes and accessories
See more on Tri-Start specials
on pages 48-51.
3
Quick Coupling
Thread
Coupling Nut
Plug
Shell Spring Fingers (EMI)
Anti-Decoupling
Device
Ratchet
Amphenol® Tri-Start
shell styles and key
design features
Designed for Performance
Numerous advantages in performance capability are designed
into the Amphenol Tri-Start Connector. A positive metal to metal
coupling design, grounding fingers, and electroless nickel plat-
ing provide superior EMI shielding capability of 65 dB minimum
at 10 GHz.
Acme threads provide coupling durability. Thicker wall sections
and a greater coupling surface area improve strength and shock
resistance. Blunting of the thread on both the coupling nut and
receptacle eliminates cross coupling. The connector quickly
mates and self locks in a 360° turn of the coupling nut.
Elongated mounting holes permit the Tri-Start Connector to
intermount with various existing MIL-spec box or wall mount re-
ceptacles, giving it a design replacement advantage.
Shells of stainless steel, or cadmium over nickel plating prevent
severe corrosion. Resistance is tested through exposure to a
500 hour salt spray. Composite versions provide protection from
salt spray exposure for 2000 hours. Other finish options are avail-
able; see how to order Tri-Start metal and Tri-Start Composite.
Recessed pins minimize potential contact damage in this 100%
scoop-proof connector. In a blind mating application, mating shells
cannot “scoop” the pins and cause a shorting or bending of con-
tacts.
The design of the Amphenol Tri-Start interfacial seal meets the
MIL-DTL-38999 Series III requirements for electrolytic erosion
resistance.
A rigid dielectric insert with excellent electrical characteristics
provides durable protection to the contacts. The socket contacts
are probe proof, and all contacts are rear removable. They are
plated in the standard 50 micro inches minimum gold, with 100
micro inches as an option and are available in standard Tri-Start
insert arrangements and special Pyle® insert arrangements in
sizes 10 power, 12, 16, 20 and 22D contacts. Special insert pat-
terns are also available with larger contacts in sizes 4 and 0.
Wall Mount Receptacle
Box Mount Receptacle
Jam Nut Receptacle
Straight Plug
Flange Mounting Plug
Lanyard Release Plug
Line Receptacle
Longer Shell Receptacle
Solder Mount Hermetic
Receptacle Applicable Patents:
Tri-StartTM Connector Patent 4,109,990.
Composite Connector Patents:
4,268,103; 4,648,670; 4,682,832; 4,703,987.
Clutch-Lok® Patent 6,152,753.
4
Tri-Start
test data
TRI-START, SERIES III
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI/EMP SHIELDING EFFFECTIVENESS dB
TESTING BY TRIAXIAL METHOD
TRI-START, SERIES III
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI/EMP SHIELDING EFFFECTIVENESS dB
TESTING BY MODE STIRRING METHOD
Test data beyond 2GHz is subject to equipment variation. * Dependant on shell finish
NOTE: for test data information on the new
Clutch-Lok Tri-Start, high vibration connectors,
consult Amphenol Aerospace.
Amphenol® Tri-Start connectors provide
EMI/EMP shielding capability which exceeds
MIL-DTL-38999 Series III requirements.
The TV and CTV Series III connector with standard
solid metal to metal coupling, EMI grounding fingers
and conductive finishes has proven to be the ultimate
in EMI/EMP shielding effectiveness. The charts il-
lustrate shielding effectiveness data which is typical
of Tri-Start connectors tested with the nickel finish
(Class F-metal, Class M-composite) over a wide fre-
quency range.
The vibration capability of the Tri-Start Series is
shown in the chart below. This illustrates the most
severe vibration envelope of any qualified connec-
tor available today.
These capabilities along with a 200°C temperature
rating and superior moisture sealing protection pro-
vide the user with a connector that can withstand
the most rigorous application.
TRI-START
VIBRATION CRITERIA
140
120
100
80
60
40
20
0
100 200 300 400 500 600 700 800
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
FREQUENCY MEGAHERTZ
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
LEAKAGE dB
140
120
100
80
60
40
20
012345
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
678910
FREQUENCY GIGAHERTZ
LEAKAGE dB
550 500 5000
.0001
.001
.01
.1
1.
10.
10in/sec
.06 in DA.
3 axes @ – 55 C
ambient + 200 C*
60 G's
(Fail Safe: 3 axes
@ ambient
30 G's)
2 axes @
200 C *
(Fail Safe:
2 axes @
ambient)
2 axes @ ambient
6dB/octave
HERTZ
DOUBLE AMPLITUDE
(IN) SINE VIBRATION POWER SPECTRAL
DENSITY (G2/HZ)
RANDOM VIBRATION
POWER SPECTRAL DENSITY G
2
/HZ
˚
˚
˚
5
Suggested Oper. Voltage
Service (Sea Level) Test Voltage Test Voltage Test Voltage Test Voltage
Rating AC (RMS) DC (Sea Level) 50,000 Ft. 70,000 Ft. 110,000 Ft.
22D .0345 ± .0010 .141 .036 .094
20 .047 ± .001 .209 .044 .125
16 .067 ± .001 .209 .078 .141
12 .100 ± .002 .209 .116 .141
10 (Power) .137 ± .002 .355 NA NA
8 .181 ± .002 .490 NA NA
4 .281 ± .002 .490 NA NA
0 .453 ± .002 .585 NA NA
Test Current (Amps) Maximum Maximum
Contact Millivolt Drop MIllivolt Drop
Size Crimp Hermetic Crimp* Hermetic*
22D 5 3 73 85
20 7.5 5 55 60
16 13 10 49 85
12 23 17 42 85
10 (Power) 33 NA 33 NA
8 (Power) 46 NA 26 NA
480NA23 NA
0 150 NA 21 NA
CONTACT RATING
+ .004
– .000
+ .004
– .000
+ .004
– .002
+ .004
– .002
M 400 550 1300 VRMS 550 VRMS 350 VRMS 200 VRMS
N 300 450 1000 VRMS 400 VRMS 260 VRMS 200 VRMS
I 600 850 1800 VRMS 600 VRMS 400 VRMS 200 VRMS
II 900 1250 2300 VRMS 800 VRMS 500 VRMS 200 VRMS
SERVICE RATING
FINISH DATA
Non-Hermetic Shell Components
Service Class
Finish Military Proprietary
Anodic Coating (Non-Conductive) C RX**
F (Metal)
M (Composite)
W (Metal)
J (Composite)
Stainless Steel with Nickel Plate S RS
Stainless Steel K RK
Stainless Steel Y Y
Stainless Steel with Nickel Plate N YN
Hermetic Shell Components
Service Class
Material / Finish Military Proprietary
* When using silver plated wire.
Crimp Well Data Hermetic Data
Contact Nominal Min. Well
Size Well Diameter Well Depth Well Diameter Depth
Tri-Start
specifications
** Add Suffix (005) to part number.
Olive Drab Cadmium Plate Nickel Base
RF
RW
Electroless Nickel
Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since he is in the best position to know what peak voltage,
switching surges, transients,etc. can be expected in a particular circuit.
6
Tri-Start
insert availability and identification
AMPHENOL TRI-START INSERT ARRANGEMENTS
Contact Size
Shell Military Service Total 22D 20 16 12 12 10 8 8††
Size/Arrg. Shell Crimp Hermetics* Rating Contacts (Coax) (Power) (Coax) (Twinax)
9-5★■ A Grounded 1 1
9-35 A X P M 6 6
9-94 ■A✦M2 2
9-98 A X P I 3 3
11-2★B✦I2 2
11-5 B ✦PI5 5
11-35 B X P M 13 13
11-54 ■BX II 4 4
11-98 B X P I 6 6
11-99 B X I 7 7
13-4★CX P I 4 4
13-8 C X P I 8 8
13-13 ■CI, Fiber Optic 4 2** 2
13-35 C X P M 22 22
13-98 C X P I 10 10
15-4 ■D✦I4 4
15-5★DX P II 5 5
15-15 D X P I 15 14 1
15-18 D X P I 18 18
15-19 D ✦P I 19 19
15-35 D X P M 37 37
15-97 D X P I 12 8 4
17-2 E X M 39 38 1
17-6 E X P I 6 6
17-8★EX P II 8 8
17-22★■ E✦Coax 4 2 2
17-26 E X P I 26 26
17-35 E X P M 55 55
17-99 E X I 23 21 2
19-11★FX P II 11 11
19-18 F X M 18 14 4
19-28 F X I 28 26 2
19-31 ■F✦M1512 1 2
19-32 F X P I 32 32
19-35 F X P M 66 66
21-11★GX I 11 11
21-16★GX P II 16 16
21-29 ■GX I 27 19 44
21-35 G X P M 79 79
21-39 G X P I 39 37 2
21-41 G X P I 41 41
21-75★ ✧ G X M 4 4 (See note)
21-79 ■G X II 19 17 2
23-6 ★■ HP M 6 6
23-14 ■H✦I14 14
23-21★HX P II 21 21
X Completely tooled.
• Majority of tooling is completed (contact Amphenol Aerospace for availabilty).
✦Not tooled for 02-R.
P Pin inserts only (contact Amphenol Aerospace for socket availability).
★Ground plane proprietary option available. Arrg. 9-5 is exclusively
ground plane type. See pg. 49 for further information on ground plane connectors.
■Not Mil-Qualified.
✧21-75 is Mil-Qualified with twinax contacts only.
Note: MS connector 21-75 is supplied with size 8 twinax.
Proprietary connector 21-75 is supplied with size 8 coax.
* Hermetic inserts - solder termination standard. (Contact Amphenol
Aerospace for optional PCB or eyelet termination).
** Two size 16 contacts dedicated to fiber optics. Consult Amphenol
Aerospace catalog 12-352 for fiber optic information.
*** For use in MIL-STD-1760 applications (see pages 31 & 32).
† For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
7
Tri-Star t and Specials
insert availability and identification
Contact Size
Shell Military Service Total 22D 20 16 12 12 10 8 8††
Size/Arrg. Shell Crimp Hermetics* Rating Contacts (Coax) (Power) (Coax) (Twinax)
23-35 H X P M 100 100
23-53 H X P I 53 53
23-54 ■H✦M5340 94
23-55 H ✦P I 55 55
25-4 J X P I 56 48 8
25-7 J ✦Twinax 99 97 2
25-8★J✦Twinax 8 8
25-11*** J ✦N11 2 9
25-17 ■J✦M4236 6
25-19★J X P I 19 19
25-20*** J ✦N30 1013 4 3
25-24★J X P I 24 12 12
25-26 ■J✦I25 16 5 4
25-29★JX I 29 29
25-35 J X P M 128 128
25-37★■ J✦I37 37
25-41 ■J X N/Inst. 41 22 3 11 2 3
25-43 J ✦I43 2320
25-46 J ✦I46 404 2†
25-61 J X P I 61 61
25-90 J X I 46 40 4 2
25-F4 ■J✦M/I 66 49 13 4
TRI-START ARRANGEMENTS, CONT.
Contact Size
Shell Military Service Total Comments 22D 20 16 12 8††
Size/Arrg. Shell Crimp Hermetics* Rating Contacts (Twinax)
9-2 A X I 2 formerly Pyle 2
15-4 D X II 4 formerly Pyle 4
15-25 D X M 25 formerly Pyle 22 3
17-20 E X M 20 formerly Pyle 16 4
21-12 G X I 12 formerly Pyle 3 9
21-21 G X M/Inst. 41 improved sealing 32 9
21-99 G X M 16 formerly Pyle 5 11
25-92 J X M 101 formerly Pyle 92 9
25-97 J X M 42 formerly Pyle 26 3 13
SPECIAL ARRANGEMENTS (Not Mil-Spec Qualified)
Contact Size
Shell Service Total 22D 20 8 4 0
Size/Arrg. Crimp Hermetics* Rating Contacts
25-16 X M 8 6 2
25L-3 X II 3 1 2
25L-7 X II 7 7
33-3 X II 3 1 2
33-5 X II 5 5
33-6 X II 6 2 4
37-5 X II 4 4
SPECIAL ARRANGEMENTS (Not Mil-Spec Qualified)
(insert arrangements requiring non-standard shells or larger contacts)
X Completely tooled.
• Majority of tooling is completed (contact Amphenol
Aerospace for availabilty).
✦Not tooled for 02-R.
P Pin inserts only (contact Amphenol Aerospace for
socket availability).
★Ground plane proprietary option available.
Arrangement 9-5 is exclusively ground plane type.
■Not Mil-Qualified.
* Hermetic inserts - solder termination standard.
(Contact Amphenol Aerospace for optional PCB or
eyelet termination).
** Two size 16 contacts dedicated to fiber optics.
Consult Amphenol Aerospace catalog 12-352
for fiber optic information.
*** For use in MIL-STD-1760 applications (pgs. 31 & 32).
† For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
Note: 25L-3 and 25L-7 require longer shells.
8
Tri-Start
alternate positioning
AR° BR° CR° DR°
Key & keyway or or or or
Shell arrangement AP° BP° CP° DP°
Size identification letter BSC BSC BSC BSC
N 105 140 215 265
A 102 132 248 320
9 B 80 118 230 312
C 35 140 205 275
D 64 155 234 304
E 91 131 197 240
N 95 141 208 236
11, A 113 156 182 292
13, B 90 145 195 252
and C 53 156 220 255
15 D 119 146 176 298
E 51 141 184 242
N 80 142 196 293
A 135 170 200 310
17 B 49 169 200 244
and C 66 140 200 257
19 D 62 145 180 280
E 79 153 197 272
N 80 142 196 293
21, A 135 170 200 310
23, B 49 169 200 244
and C 66 140 200 257
25 D 62 145 180 280
E 79 153 197 272
N 80 142 188 293
25L, A 135 170 188 310
33, B 49 169 188 244
and C 66 140 188 257
37 D 62 145 188 280
E 79 153 188 272
Master Key/Keyway Position A plug with a given rotation letter will mate with a receptacle with
the same rotation letter. The angles for a given connector are the
same whether it contains pins or sockets. Inserts are not rotated
in conjunction with the master key/keyway.
PLUG
(front face shown)
RECEPTACLE
(front face shown)
MAIN
KEYWAY
AP
BSCBP
BSC
DP
BSC
CP
BSC
˚˚
˚
˚
DR
BSC
˚CR
BSC
˚
BR
BSC
˚
AR
BSC
˚
MAIN
KEYWAY
9CONTACT LEGEND
Tri-Start
insert arrangements
front face of pin inserts illustrated
Insert Arrangement 9-5 9-35 9-94 9-98 11-2 11-5 11-35 11-54
Service Rating Grounded M M I I I M II
Number of Contacts 1623 2 5 13 4
Contact Size 8 Twinax 22D 20 20 16 20 22D 22D
Insert Arrangement 11-98 11-99 13-4 13-8 13-13 13-35 13-98 15-4
Service Rating IIII I, Fiber Optic M I I
Number of Contacts 67482222104
Contact Size 20 20 16 20 16 12 22D 20 12
Dedicated to
Fiber Optics
Insert Arrangement 15-5 15-15 15-18 15-19 15-35 15-97
Service Rating II I I I M I
Number of Contacts 5 14 1 18 19 37 8 4
Contact Size 16 20 16 20 20 22D 20 16
Insert Arrangement 17-2 17-6 17-8 17-22 17-26
Service Rating M I II Coax I
Number of Contacts 38 1 6 8 2 2 26
Contact Size 22D 8 Twinax 12 16 12 Coax 8 Coax 20
A
B
C
D
EF
G
51
6
432
BA
AB
A
B
C
D
E
123
4
5
6
7
8
910
11 1213
AB
CD
EF
A
B
C
D
AB
C
D
E
FG
H
A
BC
D
1
21 22
AB
C
D
E
F
G
H
JK
A
BC
D
AB
CD
E
AB
C
D
E
F
G
H
J
KLM
N
P
R
AB
C
D
E
F
G
H
J
KLMN
P
R
S
TU
ABC
D
E
FG
H
J
K
LMNP
R
S
T
UV
1
21
31
ABC
D
E
F
G
H
JKL
M
1
6
11
17
30
A
B
C
D
E
F
A
B
C
DE
F
G
H
A
D
C
B
ABC
D
E
F
G
H
J
K
L
M
N
PRSTU
V
W
X
Y
Z
ab
c
8 10 12 16 20 22D
CA
B
A
B
D
C
10
Tri-Start
insert arrangements
Insert Arrangement 17-35 17-99 19-11 19-18
Service Rating M I II M
Number of Contacts 55 21 2 11 14 4
Contact Size 22D 20 16 16 22D 8 Twinax
Insert Arrangement 19-28 19-31 19-32 19-35
Service Rating I M I M
Number of Contacts 26 2 2 1 12 32 66
Contact Size 20 16 8 Coax 12 22D 20 22D
Insert Arrangement 21-11 21-16 21-29 21-35
Service Rating I II I M
Number of Contacts 11 16 19 4 4 79
Contact Size 12 16 20 16 12 22D
CONTACT LEGEND
front face of pin inserts illustrated
1
3
4
9
10
16
17
24
25
31
32
39
40 47
46
52
53
55
ABC
D
E
F
G
H
J
K
L
M
N
P
RSTU
V
W
X
YZ
A
B
C
D
E
F
G
H
J
K
L
AB
C
D
E
F
G
H
R
J
K
L
M
N
P
STUV
W
X
Y
Z
a
b
c
d
e
A
B
C
E
K
M
N
R
S
U
V
W
g
h
f
ABC
D
E
F
G
H
J
K
L
M
N
P
RSTUV
W
X
Y
Z
a
b
c
d
ef
g
h
j
1
2
3
4
9
10
16
17
24
25
33
34
42
43
50
51
57
58
63
64
66
A
B
C
D
E
F
G
H
J
KL
A
B
C
D
E
F
G
H
J
K
L
M
N
PR
S
123
45
6
7
8
9
10
11
12
13
14
15
16
17
18 19
20
21
22
24
23
25
26
27
1
11
21
31
41
51
61 71
79
8 10 12 16 20 22D
AB
C
DE
F
G
H
J
K
LM
N
PR
S
T
U
11 CONTACT LEGEND
Tri-Start
insert arrangements
Insert Arrangment 21-39 21-41 21-75 21-79
Service Rating I I M II
Number of Contacts 37 2 41 4 17 2
Contact Size 20 16 20 8 Twinax 22D 8 Coax
Insert Arrangement 23-6 23-14 23-21 23-35
Service Rating M I II M
Number of Contacts 6 14 21 100
Contact Size 8 Twinax 12 16 22D
front face of pin inserts illustrated
Insert Arrangement 23-53 23-54 23-55
Service Rating I M I
Number of Contacts 53 40 9 4 55
Contact Size 20 22D 16 12 20
ABCD
E
F
G
H
J
K
L
M
N
P
R
STUVW
XYZa
b
c
d
ef
g
h
ijkm
n
p
q
r
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
UVW
XY
Z
a
b
c
d
e
f
g
h
ijkm
n
p
q
r
st
A
BC
D
AT BS CR
DP
EN
MF
LG
HK
JVU
A
B
C
D
EF
A
BK
CJ LP
MN
DH
EG
F
A
B
C
D
E
F
G
H
J
K
L
MP
R
S
N
T
U
V
WX
1
2
34
56
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
9596
9798
99
100
ABCD
E
F
G
H
J
K
L
M
NPRSTUVW
X
Y
Z
a
b
c
d
e
f
g
h
k
mnpqr
s
t
AB
u
v
w
x
y
zAB
CC
DD
EE
FF
GG HH
123456
7
8
9
10
11
12
13
14
15
16
17
18
19
2021222324 25 2627
28
29 30
31
32
33
34
35
36
37
38
39
40
41
42
4344 45 46
47
48
4950
51
52
53
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
TUVWXY
Z
a
b
c
d
e
f
g
h
i
j
k
mnpqr
s
t
v
w
x
y
zAA BB CC
uDD
EE
FF
GG HH
8 10 12 16 20 22D
12
front face of pin inserts illustrated
Tri-Start
insert arrangements
Insert Arrangement 25-4 25-7 25-8
Service Rating I Twinax Twinax
Number of Contacts 48 8 97 2 8
Contact Size 20 16 22D 8 Twinax 8 Twinax
Insert Arrangement 25-11*** 25-17 25-19
Service Rating N M I
Number of Contacts 2 9 36 6 19
Contact Size 20 10 Power 22D 8 Twinax 12
Insert Arrangement 25-20*** 25-24 25-26
Service Rating N I I
Number of Contacts 10 13 3 4 12 12 16 5 4
Contact Size 20 16 8 Twinax 12 Coax 16 12 20 12 8 Coax
(With Matched Impedance)
CONTACT LEGEND
*** For use in MIL-STD-1760 applications (see pages 31 and 32).
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZabcd
ef
g
h
k
m
n
p
q
r
t
uvw
xy
z
sJJ
KK
LL
AA
BBCC
DD
EE
FF GG
HH
1
6
7
15
16
18
19
21
22
24
26
28
29
32
33
41
42
46
53
59
60
64
67
68
72
74
76
78
79
81
82
84
85
93
94
99
25 75
AB
C
D
E
F
G
H
AB
C
D
E
F
G
HJ
KL
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TU
V
W
X
Y
Z
abcd
e
f
g
h
k
m
n
p
qrst
u
v
w
AB
C
D
E
FGH
J
K
L
M
NP
R
ST
UV
AB
C
D
E
F
G
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
AB
C
D
E
F
G
H
J
K
L
M
N
PRS
T
U
V
W
X
YZ
a
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
18 19 20 21
22
23
24
25
8 10 12 16 20 22D
13
front face of pin inserts illustrated
Insert Arrangement 25-29 25-35 25-37
Service Rating I M I
Number of Contacts 29 128 37
Contact Size 16 22D 16
Insert Arrangement 25-41 25-43 25-46
Service Rating N/Inst. I I
Number of Contacts 22 3 11 2 3 23 20 40 4 2
Contact Size 22D 20 16 12 Coax 8 Twinax 20 16 20 16 8 Coax†
CONTACT LEGEND
Tri-Start
insert arrangements
Insert Arrangement 25-61 25-90 25-F4
Service Rating I I Size 22D = M, Balance = I
Number of Contacts 61 40 4 2 49 13 4
Contact Size 20 20 16 8 Twinax 22D 16 12
† Coax contacts for RG180/U or RG195/U cable.
AB
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
bc
d
e
f
1
4
7
8
14
15
24
25
35
36
47
48
58
59
70
71
81
82
93
94
104
105
114
115
121
125
128
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
X
Y
Z
a
b
c
d
e
fg
hk
m
n
p
qr
BP
CN
DM
EL
F
G
H
J
K
A
RY
XS
W
Z
T
UV
de
npqgac
b
j
kh
mst
ri
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
WXYZa
b
c
d
e
f
g
h
k
m
np
q
r
s
tu
v
w
x
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
XY
Za
b
c
d
e
f
g
h
k
m
n
p
qr
stuv
w
x
y
z
AA
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
XYZ
abcd
e
f
g
h
i
j
k
m
n
p
q
r
s
tuv
wx
y
z
BB
CC
DD
EE
FF GG HH
JJ
KK
LL
MM
NN
AA
PP
AB
C
D
E
F
G
H
J
KL
M
N
a
P
R
S
T
U
VW
XY
Z
b
c
d
e
f
g
h
AA
k
q
m
n
p
r
stu
v
w
x
y
z
1
17
18
19
49
35
20
21
22
23
16 15
48
59
60 66 64
65
37 50 51 41 42 43 31
30
38 39 40 29
27
26
25
24
54636261
36
325352
44
55
56
57
46
34 14 13
45
12
11
10
9
8
7
6
5
4
3
2
33
28
47
58
8 10 12 16 20 22D
14
Special
insert arrangements
front face of pin inserts illustrated
Insert Arrangement 9-2 15-4* 15-25 17-20
Service Rating I II M M
Number of Contacts 2 4 22 3 16 4
Contact Size 20 16 22D 16 22D 12
Insert Arrangement 21-12 21-21 21-99
Service Rating I M/Inst. M
Number of Contacts 3 9 32 9 5 11
Contact Size 20 12 22D 12 22D 12
CONTACT LEGEND
NOTE: Some specials shown here were formerly known as Pyle
arrangements.Consult Amphenol for how to order information for
connectors with these inserts.
For further information on special arrangements consult
Amphenol Aerospace, Sidney NY.
* Pyle 15-4 does not mate with Amphenol Tri-Start 15-4 insert.
Insert Arrangement 25-92 25-97
Service Rating M M
Number of Contacts 92 9 26 3 13
Contact Size 22D 16 22D 16 12
AB
A
BC
D
3
2
1
13
12
11
4
5
6
7
8
9
10
14
15
16
17
18
19
20
23
22
21
24
25
A
B
C
D
1
23
4
5
67
89
10 11
12
13
1415
16
A
B
C
D
E
K
F
MG
H
J
L
1
2
3
4
5
6
7
8
910
A
B
C
D
E
F
G
H
J
11 12
1314
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31 32
A
B
C
D
EF
G
H
J
K
L
M
N
PR
S
1
3
4
5
13
24
36
46
67
57
79
90
98
101
97 89 7866 56 45 35 23 12
AM
BL
N
CK
DJ
EH
FG
WY
X
Ua
VZ
mr
npsk
T
SRPedc
b
t
uf
g
h
wv
j
8 10 12 16 20 22D
15
Special
insert arrangements requiring non-standard
shells or larger contacts
front face of pin inserts illustrated
Insert Arrangement 25-16 25L-3 25L-7
Service Rating M II II
Number of Contacts 6 2 1 2 7
Contact Size 20 4 8 4 8
Insert Arrangement 33-3 33-5 33-6
Service Rating II II II
Number of Contacts 1 2 5 2 4
Contact Size 4 0 4 8 4
CONTACT LEGEND
NOTE: Some specials shown here were formerly
known as Pyle arrangements. Consult Amphenol
for how to order information for connectors with
these inserts.
Consult Amphenol Aerospace for longer shell
drawings.
A
B
C
D
E
F
G
H
A
B
C
A
B
CD
E
F
G
B
CA
A
B
CD
E
A
B
C
D
E
F
A
B
C
D
840 22D
Insert Arrangement 37-5
Service Rating II
Number of Contacts 4
Contact Size 0
16
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
V THREAD
AA
B
THREAD
LL (TV)
LL (CTV)
1
M (TV)
M (CTV)
1
L (TV)
L (CTV)
1
1.240 MAX
31.50 MAX
RED
BAND†
BLUE
BAND†† –A–
Z (TV)
Z (CTV)
1
.861 MAX
21.87 MAX
(TV)
.909 MAX
23.09 MAX
(CTV)
1.037 MAX
26.34 MAX
(TV)
1.084 MAX
27.53 MAX
(CTV)
D
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
TVP00R (D38999/20) – crimp, metal
CTVP00R (D38999/20) – crimp, composite
wall mounting receptacle
† Red band indicates fully mated
†† Blue band indicates rear release contact retention system
MS B Thread M M1A1 Dia. A2 Dia. AA LL
Shell Class 2A L L1+.000 +.000 Z Z1Back Front Max. +.006 LL1
Shell Size 0.1P-0.3L-TS Max. Max. –.005 –.005 R1R2S T Max. Max Panel Panel Panel –.000 ±.005 TT
Size Code (Plated) (TV) (CTV) (TV) (CTV) Max. ±.008 (TV) (CTV) Mount Mount Thickness (TV) (CTV) ±.008
9 A .6250 .469 .514 .820 .773 .719 .594 .948 .128 .153 .198 .650 .510 .234 .905 .908 .216
11 B .7500 .469 .514 .820 .773 .812 .719 1.043 .128 .153 .198 .800 .620 .234 .905 .908 .194
13 C .8750 .469 .514 .820 .773 .906 .812 1.137 .128 .153 .198 .910 .740 .234 .905 .908 .194
1 5 D 1.0000 .469 .514 .820 .773 .969 .906 1.232 .128 .153 .198 1.040 .900 .234 .905 .908 .173
1 7 E 1.1875 .469 .514 .820 .773 1.062 .969 1.323 .128 .153 .198 1.210 1.010 .234 .905 .908 .194
19 F 1.2500 .469 .514 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.280 1.130 .234 .905 .908 .194
21 G 1.3750 .500 .545 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.410 1.250 .204 .905 .904 .194
23 H 1.5000 .500 .545 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.530 1.360 .204 .905 .904 .242
25 J 1.6250 .500 .545 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.660 1.470 .204 .905 .904 .242
MS M M1A1 Dia. A2 Dia. LL
Shell L L1+.00 +.00 V Z Z1Back Front +.15 LL1
Shell Size Max. Max. –.13 –.13 R1R2S T Thread Max. Max. Panel Panel AA –.00 ±.13 TT
Size Code (TV) (CTV) (TV) (CTV) Max ±.20 Metric (TV) (CTV) Mount Mount Max. (TV) (CTV) ±.20
9 A 11.91 13.06 20.83 19.63 18.26 15.09 24.1 3.25 M12X1-6g 3.89 5.03 16.66 13.11 5.94 22.99 23.06 5.49
11 B 11.91 13.06 20.83 19.63 20.62 18.26 26.5 3.25 M15X1-6g 3.89 5.03 20.22 15.88 5.94 22.99 23.06 4.93
13 C 11.91 13.06 20.83 19.63 23.01 20.62 28.9 3.25 M18X1-6g 3.89 5.03 23.42 19.05 5.94 22.99 23.06 4.93
15 D 11.91 13.06 20.83 19.63 24.61 23.01 31.3 3.25 M22X1-6g 3.89 5.03 26.59 23.01 5.94 22.99 23.06 4.39
17 E 11.91 13.06 20.83 19.63 26.97 24.61 33.7 3.25 M25X1-6g 3.89 5.03 30.96 25.81 5.94 22.99 23.06 4.93
19 F 11.91 13.06 20.83 19.63 29.36 26.97 36.9 3.25 M28X1-6g 3.89 5.03 32.94 28.98 5.94 22.99 23.06 4.93
21 G 12.70 13.84 20.07 18.82 31.75 29.36 40.1 3.25 M31X1-6g 4.65 5.79 36.12 32.16 5.18 22.99 22.96 4.93
23 H 12.70 13.84 20.07 18.82 34.93 31.75 43.3 3.91 M34X1-6g 4.65 5.79 39.29 34.93 5.18 22.99 22.96 6.15
25 J 12.70 13.84 20.07 18.82 38.10 34.93 46.4 3.91 M37X1-6g 4.65 5.79 42.47 37.69 5.18 22.99 22.96 6.15
Millimeters
Inches
All dimensions for reference only Designates true position dimensioning
Part number reference.
See how to order, pages 43-46
to complete.
TVP00RW-XX-XXX
TVPS00RK-XX-XXX
TVPS00RF-XX-XXX
TVPS00RS-XX-XXX
CTVP00RW-XX-XXX
CTVPS00RF-XX-XXX
D38999/20
BACK PANEL
MOUNTING
FRONT PANEL
MOUNTING
A
1
A
2
PANEL HOLE
DIMENSIONS
17
MS M M1A1A2LL
Shell L L1+.00 +.00 Z Z1Back Front +.15 LL1
Shell Size Max. Max. –.13 –.13 R1R2S T Max. Max. Panel Panel AA –.00 ±.13 TT
Size Code (TV) (CTV) (TV) (CTV) Max ±.20 (TV) (CTV) Mount Mount Max. (TV) (CTV) ±.20
9 A 5.21 6.35 20.83 19.63 18.26 15.09 24.1 3.25 3.89 5.03 16.66 13.11 5.94 22.99 23.06 5.49
11 B 5.21 6.35 20.83 19.63 20.62 18.26 26.5 3.25 3.89 5.03 20.22 15.88 5.94 22.99 23.06 4.93
13 C 5.21 6.35 20.83 19.63 23.01 20.62 28.9 3.25 3.89 5.03 23.42 19.05 5.94 22.99 23.06 4.93
15 D 5.21 6.35 20.83 19.63 24.61 23.01 31.3 3.25 3.89 5.03 26.59 23.01 5.94 22.99 23.06 4.39
17 E 5.21 6.35 20.83 19.63 26.97 24.61 33.7 3.25 3.89 5.03 30.96 25.81 5.94 22.99 23.06 4.93
19 F 5.21 6.35 20.83 19.63 29.36 26.97 36.9 3.25 3.89 5.03 32.94 28.98 5.94 22.99 23.06 4.93
21 G 5.97 7.11 20.07 18.82 31.75 29.36 40.1 3.25 4.65 5.79 36.12 32.16 5.18 22.99 22.96 4.93
23 H 5.97 7.11 20.07 18.82 34.92 31.75 43.3 3.91 4.65 5.79 39.29 34.93 5.18 22.99 22.96 6.15
25 J 5.97 7.11 20.07 18.82 38.10 34.92 46.4 3.91 4.65 5.79 42.47 37.69 5.18 22.99 22.96 6.15
TVP02R – crimp, metal
CTVP02R – crimp, composite
box mounting receptacle
† Red band indicates fully mated
†† Blue band indicates rear release contact retention system
Consult Amphenol Aerospace for availability of composite box mount receptacles.
MS B Thread M M1A1A2AA LL
Shell Class 2A L L1+.000 +.000 Z Z1Back Front Max. +.006 LL1
Shell Size 0.1P-0.3L-TS Max. Max. –.005 –.005 R1R2S T Max. Max. Panel Panel Panel –.000 ±.005 TT
Size Code (Plated) (TV) (CTV) (TV) (CTV) Max. ±.008 (TV) (CTV) Mount Mount Thickness (TV) (CTV) ±.008
9 A .6250 .205 .250 .820 .773 .719 .594 .948 .128 .153 .198 .650 .510 .234 .905 .908 .216
11 B .7500 .205 .250 .820 .773 .812 .719 1.043 .128 .153 .198 .800 .620 .234 .905 .908 .194
13 C .8750 .205 .250 .820 .773 .906 .812 1.137 .128 .153 .198 .910 .740 .234 .905 .908 .194
1 5 D 1.0000 .205 .250 .820 .773 .969 .906 1.232 .128 .153 .198 1.040 .900 .234 .905 .908 .173
1 7 E 1.1875 .205 .250 .820 .773 1.062 .969 1.323 .128 .153 .198 1.210 1.010 .234 .905 .908 .194
19 F 1.2500 .205 .250 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.280 1.130 .234 .905 .908 .194
21 G 1.3750 .235 .280 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.410 1.250 .204 .905 .904 .194
23 H 1.5000 .235 .280 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.530 1.360 .204 .905 .904 .242
25 J 1.6250 .235 .280 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.660 1.470 .204 .905 .904 .242
Millimeters
Inches
M (TV)
M (CTV)
LL (TV)
LL (CTV)
1
1
AA
B
THREAD
BLUE
BAND††
RED
BAND†
L (TV)
L (CTV)
1
Z (TV)
Z (CTV)
1
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R1
R2
All dimensions for reference only Designates true position dimensioning
BACK PANEL
MOUNTING
FRONT PANEL
MOUNTING
A
1
A
2
PANEL HOLE
DIMENSIONS
Part number reference.
See how to order, pages 43-46
to complete.
TVP02RW-XX-XXX
TVPS02RK-XX-XXX
TVPS02RF-XX-XXX
TVPS02RS-XX-XXX
CTVP02RW-XX-XXX
CTVPS02RF-XX-XXX
18
1.234 MAX
31.34 MAX
1.220 MAX
31.00 MAX B THREAD
D
V THREAD
.359 MAX
9.12 MAX
.359 MAX
9.12 MAX
.591 +.003
–.000
15.01 +.08
–.00
BLUE BAND
†
1.234 MAX
31.34 MAX
Q
1.656 MAX
42.06 MAX
1.797 MAX
45.64 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
–A–
V THREAD
.591 +.003
–.000
15.01 +.08
–.00
–A–
Q
B THREAD
D
BLUE BAND
†
TV06R (D38999/26) – crimp, metal
CTV06R (D38999/26) – crimp, composite
straight plug
MS B Thread Q
Shell Shell Size 0.1P-0.3L-TS-2B Dia.
Size Code (Plated) Max.
9 A .6250 .858
11 B .7500 .984
13 C .8750 1.157
15 D 1.0000 1.280
17 E 1.1875 1.406
19 F 1.2500 1.516
21 G 1.3750 1.642
23 H 1.5000 1.768
25 J 1.6250 1.890
† Blue band indicates rear release contact retention system
All dimensions for reference only.
Part number reference.
See how to order, pages 43-46
to complete.
TV06RW-XX-XXX
TVS06RK-XX-XXX
TVS06RF-XX-XXX
TVS06RS-XX-XXX
CTV06RW-XX-XXX
CTVS06RF-XX-XXX
D38999/26
MS V
Shell Shell Size Q Thread
Size Code Max. Metric
9 A 21.8 M12X1-6g
11 B 25.0 M15X1-6g
13 C 29.4 M18X1-6g
15 D 32.5 M22X1-6g
17 E 35.7 M25X1-6g
19 F 38.5 M28X1-6g
21 G 41.7 M31X1-6g
23 H 44.9 M34X1-6g
25 J 48.0 M37X1-6g
Inches Millimeters
METAL
COMPOSITE
19
TV26/MTV26 – crimp, metal
CLUTCH-LOK® straight plug for high vibration
and harsh environment applications
The latest in MIL-DTL-38999, Series III Connector Technology is the CLUTCH-LOK. Designed
for high vibration and harsh environments such as aircraft gas turbine engines, it is also an
ideal choice for demanding applications such as aircraft, space and military ground vehicles.
The unique clutch design of the Amphenol CLUTCH-LOK means that you don’t have to
compromise the need for quick, smooth mating of plugs and receptacles in order to get
increased uncoupling torque.
The CLUTCH-LOK has proven to not only remain mated and pass all the Series III specifica-
tion requirements - it also has proven to actually tighten itself under vibration. This is a
powerful advantage over the traditionally high vibration application connectors. The CLUTCH-
LOK is also a tremendous advantage in inaccessible, hard to reach areas where mating
torque is difficult to apply and complete coupling is not verifiable by inspection.
CLUTCH-LOK features and benefits:
• High degree of differential torque
• Infinite free coupling and positive metal-to-metal bottoming with each mating
• No settling back to the next ratchet tooth
• Available with stainless steel shells and Class K firewall inserts
• All the advantages of MIL-DTL-38999 Series III including EMI/RFI shielding, electrolytic erosion
resistance and contact protection with recessed pins
• Enhanced connector performance at affordable prices
• Completely intermateable with all existing MIL-DTL-38999 Series III connectors
• Fully QPL’d
Part number reference.
See how to order, pages 43, 44
to complete.
TV26RKXXXXX
TV26RSXXXXX
For parts with MS Stamping
use MTV26( ) part number as
follow:
MTV26RKXXXXX
MTV26RSXXXXX
MS B Thread Q
Shell Shell Size 0.1P-0.3L-TS-2B Dia.
Size Code (Plated) Max.
9 A .6250 .858
11 B .7500 .984
13 C .8750 1.157
15 D 1.0000 1.280
17 E 1.1875 1.406
19 F 1.2500 1.516
21 G 1.3750 1.642
23 H 1.5000 1.768
25 J 1.6250 1.890
† Blue band indicates rear release contact retention system
All dimensions for reference only.
MS V
Shell Shell Size Q Thread
Size Code Max. Metric
9 A 21.8 M12X1-6g
11 B 25.0 M15X1-6g
13 C 29.4 M18X1-6g
15 D 32.5 M22X1-6g
17 E 35.7 M25X1-6g
19 F 38.5 M28X1-6g
21 G 41.7 M31X1-6g
23 H 44.9 M34X1-6g
25 J 48.0 M37X1-6g
Inches Millimeters
1.234 MAX
31.34 MAX
1.220 MAX
31.00 MAX B THREAD
D
V THREAD
.359 MAX
9.12 MAX .591 +.003
–.000
15.01 +.08
–.00
BLUE BAND
†
Q
1.656 MAX
42.06 MAX
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO –A–
–A–
20
T•
C
H
S
2 PLACES
P ANEL THICKNESS
.062 MIN .125 MAX
1.57 MIN 3.18 MAX
BLUE BAND††
.378 MAX
9.60 MAX
1.280 MAX
32.51 MAX
K REF
SHELL SIZES 9/11 –
.871 22.12
SHELL SIZES 13/25 –
.878 22.30
.091 MAX
2.31 MAX
B THREAD
A•
V THREAD
D
RED
BAND†
–A–
.794 MAX
20.17 MAX
.940 MAX
23.88 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
TV07R (D38999/24) – crimp, metal
CTV07R (D38999/24) – crimp, composite
jam nut receptacle
† Red band indicates fully mated
†† Blue band indicates rear release contact retention system
★.059 dia min.
1.5 dia min.
Formed lockwire hole design (6 holes) is optional
MS B Thread H
Shell A• Class 2A D1D2Hex T•
Shell Size +.000 0.1P-0.3L-TS C +.010 +.000 +.017 S +.010
Size Code –.010 (Plated) Max. –.000 –.010 –.016 ±.010 –.000
9 A .669 .6250 1.199 .700 .670 .875 1.062 .697
11 B .769 .7500 1.386 .825 .770 1.000 1.250 .822
13 C .955 .8750 1.511 1.010 .955 1.188 1.375 1.007
15 D 1.084 1.0000 1.636 1.135 1.085 1.312 1.500 1.134
17 E 1.208 1.1875 1.761 1.260 1.210 1.438 1.625 1.259
19 F 1.333 1.2500 1.949 1.385 1.335 1.562 1.812 1.384
21 G 1.459 1.3750 2.073 1.510 1.460 1.688 1.938 1.507
23 H 1.575 1.5000 2.199 1.635 1.585 1.812 2.062 1.634
25 J 1.709 1.6250 2.323 1.760 1.710 2.000 2.188 1.759
MS
Shell A• D1D2H Hex T• V
Shell Size +.00 C +.25 +.00 +.43 S +.25 Thread
Size Code –.25 Max. –.00 –.25 –.41 ±.25 –.00 Metric
9 A 16.99 30.45 17.78 17.02 22.23 26.97 17.70 M12X1-6g
11 B 19.53 35.20 20.96 19.59 25.40 31.75 20.88 M15X1-6g
13 C 24.26 38.38 25.65 24.26 30.18 34.93 25.58 M18X1-6g
15 D 27.53 41.55 28.83 27.56 33.32 38.10 28.80 M22X1-6g
17 E 30.68 44.73 32.01 30.73 36.53 41.28 31.98 M25X1-6g
19 F 33.86 49.50 35.18 33.91 39.67 46.02 35.15 M28X1-6g
21 G 37.06 52.65 38.35 37.08 42.80 49.23 38.28 M31X1-6g
23 H 40.01 55.85 41.53 40.26 46.02 52.37 41.50 M34X1-6g
25 J 43.41 59.00 44.70 43.43 50.80 55.58 44.68 M37X1-6g
Millimeters
All dimensions for reference only • D shaped panel cut-out dimensions
NOTE: Deep reach receptacles are available for panel thicknesses up to .750 max.
3 lockwire holes
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D1
D2
Part number reference.
See how to order, pages 43-46
to complete.
TV07RW-XX-XXX
TVS07RK-XX-XXX
TVS07RF-XX-XXX
TVS07RS-XX-XXX
CTV07RW-XX-XXX
CTVS07RF-XX-XXX
D38999/24
Inches
21
GG (TV)
GG (CTV)
1
S (TV)
S (CTV)
2 PLACES
1
B
THREAD
LL (TV)
LL (CTV)
1
1
M (TV)
M (CTV)
.280 MIN FULL THD
7.11 MIN FULL THD
L (TV)
L (CTV)
1
Z (TV)
Z (CTV)
1
1.240MAX
31.50 MAX
V THREAD
D
–A–
RED
BAND
†
BLUE
BAND
††
.861 MAX
21.87 MAX
(TV)
.909 MAX
23.09 MAX
(CTV)
1.037 MAX
26.34 MAX
(TV)
1.084 MAX
27.53 MAX
(CTV)
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
TV01R – crimp, metal
CTV01R – crimp, composite
line receptacle
† Red band indicates fully mated
†† Blue band indicates rear release contact retention system
MS M M1LL
Shell +.00 +.00 L L1SS
1VZZ
1GG GG1+.15 LL1
Shell Size –.13 –.13 Max Max ±.25 ±.25 Thread Max Max ±.25 ±.25 –.00 ±.13
Size Coded (TV) (CTV) (TV) (CTV) (TV) (CTV) Metric (TV) (CTV) (TV) (CTV) (TV) (CTV)
9 A 20.83 19.63 11.91 13.06 17.15 16.13 M12X1-6g 3.89 5.03 20.62 17.75 22.99 23.06
11 B 20.83 19.63 11.91 13.06 20.32 19.43 M15X1-6g 3.89 5.03 22.99 22.22 22.99 23.06
13 C 20.83 19.63 11.91 13.06 23.50 22.47 M18X1-6g 3.89 5.03 27.76 25.57 22.99 23.06
15 D 20.83 19.63 11.91 13.06 26.67 27.94 M22X1-6g 3.89 5.03 30.96 28.95 22.99 23.06
17 E 20.83 19.63 11.91 13.06 31.45 30.40 M25X1-6g 3.89 5.03 34.93 31.21 22.99 23.06
19 F 20.83 19.63 11.91 13.06 33.02 32.00 M28X1-6g 3.89 5.03 37.31 35.05 22.99 23.06
21 G 20.07 18.82 12.70 13.84 36.20 35.18 M31X1-6g 4.65 5.79 41.28 37.92 22.99 22.96
23 H 20.07 18.82 12.70 13.84 39.37 38.35 M34X1-6g 4.65 5.79 44.45 41.30 22.99 22.96
25 J 20.07 18.82 12.70 13.84 42.55 41.53 M37X1-6g 4.65 5.79 47.63 45.13 22.99 22.96
Millimeters
All dimensions for reference only
MS M M1LL
Shell B Thread +.000 +.000 L L1SS
1ZZ
1GG GG1+.006 LL1
Shell Size 0.1P-0.3L-TS-2A –.005 –.005 Max. Max. ±.010 ±.010 Max. Max. ±.010 ±.010 –.000 ±.005
Size Code (Plated) (TV) (CTV) (TV) (CTV) (TV) (CTV) (TV) (CTV) (TV) (CTV) (TV) (CTV)
9 A .6250 .820 .773 .469 .514 .675 .635 .153 .198 .812 .699 .905 .908
1 1 B .7500 .820 .773 .469 .514 .800 .765 .153 .198 .905 .875 .905 .908
1 3 C .8750 .820 .773 .469 .514 .925 .885 .153 .198 1.093 1.007 .905 .908
15 D 1.0000 .820 .773 .469 .514 1.050 1.100 .153 .198 1.219 1.140 .905 .908
17 E 1.1875 .820 .773 .469 .514 1.238 1.197 .153 .198 1.375 1.229 .905 .908
19 F 1.2500 .820 .773 .469 .514 1.300 1.260 .153 .198 1.469 1.380 .905 .908
21 G 1.3750 .790 .741 .500 .545 1.425 1.385 .183 .228 1.625 1.493 .905 .904
23 H 1.5000 .790 .741 .500 .545 1.550 1.510 .183 .228 1.750 1.626 .905 .904
25 J 1.6250 .790 .741 .500 .545 1.675 1.635 .183 .228 1.875 1.777 .905 .904
Inches
Part number reference.
See how to order, 43-45 to
complete.
TV01RW-XX-XXX
TVS01RF-XX-XXX
CTV01RW-XX-XXX
CTVS01RF-XX-XXX
22
BLUE
BAND†
G
.190 +.010
–.000
4.82 +.26
–.00
B
THREAD
Q
.591 +.003
–.000
15.01+.08
–.00
3.59 MAX
9.12 MAX
GG
M
.005 M
.13
.138-32UNC-2B
HELICAL COIL
–A–
R
R
1.656 MAX
42.06 MAX
1.797 MAX
45.64 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
D
TV09R – crimp, metal
flange mounting plug
† Blue band indicates rear release contact retention system
MS Q GG
Shell Shell Size G Dia. R Dia.
Size Code ±1.52 Max ±.13
9** A 28.09 21.82 26.37 46.69
11 B 28.09 24.62 28.32 49.48
13** C 28.09 28.98 31.50 53.95
15 D 28.09 32.16 33.71 57.10
17 E 28.09 35.33 35.99 60.33
19 F 34.44 38.10 39.55 63.37
21 G 34.44 41.28 41.25 65.23
23 H 34.44 44.45 43.51 69.16
25 J 34.44 47.63 45.75 72.34
Millimeters
All dimensions for reference only Designates true position dimensioning
** Partially tooled. Consult Amphenol Aerospace for availability
MS B Thread Q GG
Shell Shell Size 0.1P-0.3L-TS-2A G Dia. R Dia.
Size Coded (Plated) ±.060 Max ±.005
9** A .6250 1.106 .859 1.038 1.838
11 B .7500 1.106 .969 1.115 1.948
13** C .8750 1.106 1.141 1.240 2.124
15 D 1.0000 1.106 1.266 1.327 2.248
17 E 1.1875 1.106 1.391 1.417 2.375
19 F 1.2500 1.356 1.500 1.557 2.495
21 G 1.3750 1.356 1.625 1.624 2.568
23 H 1.5000 1.356 1.750 1.713 2.723
25 J 1.6250 1.356 1.875 1.801 2.848
Inches
Part number reference.
See how to order, page 43 to
complete.
TV09RW-XX-XXX
TVS09RF-XX-XXX
23
TVPS02Y (D38999/21) – hermetic, metal
box mounting receptacle
† Red band indicates fully mated
NOTE: Consult Amphenol Aerospace for availability of non-glass-sealed versions
with printed circuit tail contacts.
Millimeters
All dimensions for reference only Designates true position dimensioning
Inches
MS
Shell Shell Size R1R2STTT
Size Code ±.25 ±.20 ±.20
9 A 18.26 15.09 23.83 3.25 5.49
11 B 20.62 18.26 26.19 3.25 4.93
13 C 23.01 20.62 28.58 3.25 4.93
15 D 24.61 23.01 30.96 3.25 4.39
17 E 26.97 24.61 33.32 3.25 4.93
19 F 29.36 26.97 36.53 3.25 4.93
21 G 31.75 29.36 39.67 3.25 4.93
23 H 34.93 31.75 42.88 3.91 6.15
25 J 38.10 34.93 46.02 3.91 6.15
MS B Thread
Shell Class 2A
Shell Size 0.1P-0.3L-TS R1 R2 S T TT
Size Code (Plated) ±.010 ±.008 ±.008
9 A .6250 .719 .594 .938 .128 .216
1 1 B .7500 .812 .719 1.031 .128 .194
1 3 C .8750 .906 .812 1.125 .128 .194
15 D 1.0000 .969 .906 1.219 .128 .173
17 E 1.1875 1.062 .969 1.312 .128 .194
19 F 1.2500 1.156 1.062 1.438 .128 .194
21 G 1.3750 1.250 1.156 1.562 .128 .194
23 H 1.5000 1.375 1.250 1.688 .154 .242
25 J 1.6250 1.500 1.375 1.812 .154 .242
Part number reference.
See how to order, pages 43, 44
to complete.
TVPS02Y-XX-XXX
TVPS02YN-XX-XXX
D38999/21
S
2 PLACES
R
R
2
1
2 PLACES
2 PLACES
TT
4 PLACES .005
.13
M
M
T
4 PLACES
B THREAD
RED
BAND† .250 MAX
6.35 MAX
1
.913 +.011
–.000
23.19 +.28
–.00 .093 +.006
–.000
2.36 +.15
–.00
24
TVS07Y (D38999/23) – hermetic, metal
jam nut receptacle
† Red band indicates fully mated
★. 059 dia min.
1.5 dia min.
Formed lockwire hole design (6 holes) is optional.
3 lockwire holes
MS B Thread H
Shell A• Class 2A D1D2Hex T• KK
Shell Size +.000 0.1P-0.3L-TS C +.010 +.000 +.017 L S +.010 +.011
Size Code –.010 (Plated) Max –.000 –.010 –.016 Max ±.010 –.000 –.000
9 A .669 .6250 1.199 .700 .670 .875 .357 1.062 .697 .642
11 B .769 .7500 1.386 .825 .770 1.000 .357 1.250 .822 .766
13 C .955 .8750 1.511 1.010 .955 1.188 .357 1.375 1.007 .892
15 D 1.084 1.0000 1.636 1.135 1.085 1.312 .357 1.500 1.134 1.018
17 E 1.208 1.1875 1.761 1.260 1.210 1.438 .357 1.625 1.259 1.142
19 F 1.333 1.2500 1.949 1.385 1.335 1.562 .381 1.182 1.384 1.268
21 G 1.459 1.3750 2.073 1.510 1.460 1.688 .381 1.938 1.507 1.392
23 H 1.575 1.5000 2.199 1.635 1.585 1.812 .381 2.062 1.634 1.518
25 J 1.709 1.6250 2.323 1.760 1.710 2.000 .381 2.188 1.759 1.642
MS A• D1D2H Hex T• KK
Shell Shell Size +.00 C +.25 +.00 +.43 L S +.25 +.28
Size Code –.25 Max –.00 –.25 –.41 Max ±.25 –.00 –.00
9 A 16.99 30.45 17.78 17.02 22.23 9.07 26.97 17.70 16.31
11 B 19.53 35.20 20.96 19.59 25.40 9.07 31.75 20.88 19.46
13 C 24.26 38.38 25.65 24.26 30.18 9.07 34.93 25.58 22.66
15 D 27.53 41.55 28.83 27.56 33.32 9.07 38.10 28.80 25.86
17 E 30.68 44.73 32.01 30.73 36.53 9.07 41.28 31.98 29.01
19 F 33.86 49.50 35.18 33.91 39.67 9.68 46.02 35.15 32.21
21 G 37.06 52.65 38.35 37.08 42.80 9.68 49.23 38.28 35.36
23 H 40.01 55.85 41.53 40.26 46.02 9.68 52.37 41.50 38.56
25 J 43.41 59.00 44.70 43.43 50.80 9.68 55.58 44.68 41.71
Millimeters
Inches
All dimensions for reference only • D shaped panel cut-out dimensions
Part number reference.
See how to order, pages 43, 44
to complete.
TVS07Y-XX-XXX
TVS07YN-XX-XXX
D38999/23
C
T•
H
S
2 PLACES K REF
.200 MAX
5.08 MAX
KK
RED
BAND†
B THREAD
A•
L
P ANEL THICKNESS
.062 MIN .125 MAX
1.57 MIN 3.18 MAX
SHELL SIZES 9/11 – .871 22.12
SHELL SIZES 13/25 – .878 22.30
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D
1
D
2
25
TVSIY (D38999/25) – hermetic, metal
solder mounting receptacle
MS B Thread GG KK
Shell Class 2A L M Dia. Dia.
Shell Size 0.1P-0.3L-TS +.011 +.006 +.011 +.001
Size Code (Plated) –.005 –.005 –.010 –.005
9 A .6250 .806 .125 .750 .672
11 B .7500 .806 .125 .844 .781
13 C .8750 .806 .125 .969 .906
15 D 1.0000 .806 .125 1.094 1.031
17 E 1.1875 .806 .125 1.218 1.156
19 F 1.2500 .806 .125 1.312 1.250
21 G 1.3750 .806 .125 1.438 1.375
23 H 1.5000 .838 .156 1.563 1.500
25 J 1.6250 .838 .156 1.688 1.625
GG KK
MS L M Dia. Dia.
Shell Shell Size +.28 +.15 +.28 +.03
Size Code –.00 –.13 –.25 –.13
9 A 20.47 3.18 19.05 17.07
11 B 20.47 3.18 21.44 19.84
13 C 20.47 3.18 24.61 23.01
15 D 20.47 3.18 27.79 26.19
17 E 20.47 3.18 30.94 29.36
19 F 20.47 3.18 33.32 31.75
21 G 20.47 3.18 36.53 34.93
23 H 21.29 3.96 39.70 38.10
25 J 21.29 3.96 42.88 41.28
Millimeters
Inches
All dimensions for reference only
Part number reference.
See how to order, pages 43, 44
to complete.
TVSIY-XX-XXX
TVSIYN-XX-XXX
D38999/25
† Red band indicates fully mated
GG B THREAD
RED BAND†
.375 MAX
9.53 MAX
KK
M
L
.031+.006
–.005
.79 +.15
–.13
26
TVSHIY (D38999/27) – hermetic, metal
weld mounting receptacle
GG
B THREAD
RED BAND†
L
M
.375 MAX
9.53 MAX
MS B Thread GG
Shell Class 2A L M Dia.
Shell Size 0.1P-0.3L-TS +.011 +.006 +.010
Size Code (Plated) –.000 –.005 –.000
9 A .6250 .806 .125 .973
11 B .7500 .806 .125 1.095
13 C .8750 .806 .125 1.221
15 D 1.0000 .806 .125 1.347
17 E 1.1875 .806 .125 1.434
19 F 1.2500 .806 .125 1.579
21 G 1.3750 .806 .125 1.721
23 H 1.5000 .838 .156 1.886
25 J 1.6250 .838 .156 1.973
GG
MS L M Dia.
Shell Shell Size +.28 +.15 +.25
Size Code –.00 –.13 –.00
9 A 20.47 3.18 24.71
11 B 20.47 3.18 27.81
13 C 20.47 3.18 31.01
15 D 20.47 3.18 34.21
17 E 20.47 3.18 36.42
19 F 20.47 3.18 40.11
21 G 20.47 3.18 43.71
23 H 21.29 3.96 47.90
25 J 21.29 3.96 50.11
Millimeters
Inches
All dimensions for reference only
† Red band indicates fully mated
Part number reference.
See how to order, pages 43, 44
to complete.
TVSHIY-XX-XXX
TVSHIYN-XX-XXX
D38999/27
27
TV Breakaway Fail Safe Connectors
quick-disconnect with an axial pull of lanyard
Amphenol Tri-Start Breakaway Fail Safe Con-
nectors provide unequalled performance in
environments requiring instant disengage-
ment.
Designed to provide quick disconnect of a
connector plug and receptacle with an axial
pull on the lanyard, the “Breakaway” Fail Safe
connector family offers a wide range of
electrical and mechanical features:
• Instant decoupling and damage free
separation
• Completely intermateable with standard
receptacles (D38999/20 and /24)
• Inventory support commonality through the
use of standard insert arrangements and
contacts
Breakaway un-mating is initiated by applying a
pull force to the lanyard which causes the oper-
ating sleeve on the plug to move away from the
receptacle. Coupling segments on the plug then move
away from the mating receptacle while expanding, thus releasing the receptacle.
After completion of the un-mating sequence, spring compression returns the
sleeve and segments to their original positions. Un-mating of the plug may also
be accomplished by normal rotation of the coupling ring without affecting the
breakaway capability.
The Tri-Start Breakaway Fail Safe connector features which provide EMI/EMP
shielding in excess of MIL-DTL-38999 Series III requirements:
• Solid metal-to-metal coupling
• EMI grounding fingers
• Conductive finishes
Amphenol Breakaway Fail Safe connectors are qualified to MIL-DTL-38999/
29, /30 and /31 (for MIL-STD-1760 Stores Management applications). In fact,
Amphenol offers more qualified Breakaway shell size and insert combina-
tions than any other QPL supplier.
In addition to standard Breakaway connectors, Amphenol also manufactures
custom breakaway connectors including those with:
• Highly durable non-metallic operating sleeves in a variety of lengths and
diameters
• Increased pull-force capability
• Low-profile designs
• Custom lanyard lengths and backshells
• Low force separation capabilities
• Low insertion/separation force contacts
• Non-cadmium finishes
Whether you need a standard Breakaway, one of our custom Breakaways or, a
unique Breakaway design, please contact your local Amphenol representative.
Contact Amphenol Aerospace for more information on breakaway, quick-
disconnect connectors. Other Amphenol cylindrical families (MIL-DTL-38999
Series I & II, MIL-C-26482, MIL-C-83723) also offer breakaway quick-disconnect
connectors.
Breakaway with Coax Contacts
Special configuration Fail Safe used on
space telescope application. Lanyard is
replaced by a swivel ring for remote disconnect
and “wing arms” have been added for manual
actuation accessibility by gloved astronauts.
Amphenol offers a variety of lanyard plug styles including MIL-STD-1760
types 1, 2 and 6 for Stores Management applications.
TYPE 2 TYPE 6 TYPE 1
28
D
.374 MAX
9.50 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING THREAD RELEASE
LANYARD
PULLED T AUT
AGAINST A
.500 ±.031
12.70 ±.79
DIA MANDREL
V THREAD
METRIC
1.781 MAX
45.24 MAX 2.375 MAX
60.33 MAX
BLUE BAND
†
B
.359 MAX
9.12 MAX
LANYARD LENGTH
(See Lanyard Length Table)
D38999/29 & D38999/30
TV Breakaway Fail Safe – crimp, metal
lanyard release plug
† Blue band indicates rear release contact retention system
MS D Max V
Shell Shell Size B Accessory Thread
Size Code Max Dia. Metric
11 B 46.89 28.17 M15X1.0-6g
13 C 50.09 31.75 M18X1.0-6g
15 D 52.81 34.93 M22X1.0-6g
17 E 56.01 38.10 M25X1.0-6g
19 F 58.45 41.28 M28X1.0-6g
21 G 62.79 44.45 M31X1.0-6g
23 H 65.89 47.63 M34X1.0-6g
25 J 68.71 50.08 M37X1.0-6g
Millimeters
All dimensions for reference only
MS D
Shell Shell Size B Max
Size Code Max Accessory Dia.
11 B 1.846 1.109
13 C 1.972 1.250
15 D 2.079 1.375
17 E 2.205 1.500
19 F 2.301 1.625
21 G 2.472 1.750
23 H 2.594 1.875
25 J 2.705 2.000
Inches
Part number reference.
See how to order, pages 29, 30
to complete.
D38999/29 (Pins Only)
D38999/30 (Sockets Only)
88-5565XX-XX
91-5565XX-XX
29
D38999/29 & D38999/30
TV Breakaway Fail Safe
lanyard release plug
insert availability, how to order
Contact Size
Insert Service Total 22D 20 16 12 12 8 8
Arrangement Rating Contacts Coax Coax* Twinax
11-2 I 2 2
11-35 M 13 13
11-98 I 6 6
13-4 I 4 4
13-8 I 8 8
13-35 M 22 22
13-98 I 10 10
15-5 II 5 5
15-15 I 15 14 1
15-18 I 18 18
15-19 I 19 19
15-35 M 37 37
15-97 I 12 8 4
17-6 I 6 6
17-8 II 8 8
17-26 I 26 26
17-35 M 55 55
17-99 I 23 21 2
19-11 II 11 11
19-32 I 32 32
19-35 M 66 66
21-11 I 11 11
21-16 II 16 16
21-35 M 79 79
21-39 I 39 37 2
21-41 I 41 41
23-21 II 21 21
23-35 M 100 100
23-53 I 53 53
23-54 M 53 40 9 4
23-55 I 55 55
25-4 I 56 48 8
25-19 I 19 19
25-20 N 30 10 13 4 3
25-24 I 24 12 12
25-29 I 29 29
25-35 M 128 128
25-43 I 43 23 20
25-46 I 46 40 4 2*
25-61 I 61 61
INSERT AVAILABILITY
* For RG 180/U and RG 195/U cables only.
(Check Amphenol, Sidney, NY for other
cable applications.
For availability of other insert arrange-
ments consult Amphenol, Sidney, NY.
For accessories for lanyard release plugs
see page 33.
TABLE II
LANYARD LENGTH CODES
Basic MIL-DTL-38999
Part Insert
Number Arrangement
88/91-556508 11-2
06 11-35
07 11-98
10 13-4
11 13-8
13 13-98
14 13-35
18 15-5
23 15-15
22 15-18
19 15-19
20 15-35
27 17-6
28 17-8
29 17-26
30 17-35
31 17-99
37 19-11
39 19-32
40 19-35
47 21-11
48 21-16
49 21-35
50 21-41
51 21-39
57 23-21
58 23-35
59 23-53
61 23-54
60 23-55
66 25-19
74 25-20
67 25-29
68 25-35
69 25-43
70 25-61
71 25-4
72 25-24
Lanyard Lanyard Lanyard Length
Length (in.) Length (mm) Code For
± .236 ± 6.0 Part Number
4.016 102 A
4.528 115 B
5.000 127 C
5.512 140 D
6.024 153 E
6.535 166 F
7.008 178 G
7.520 191 H
7.992 203 I
8.503 216 J
9.016 229 K
9.528 242 L
10.000 254 M
10.512 267 N
11.024 280 P
11.535 293 R
12.008 305 S
12.520 318 T
13.031 331 U
14.016 356 V
15.000 381 W
16.024 407 X
17.008 432 Y
18.031 458 Z
TABLE I
INSERT ARRANGEMENT CODE
Tri-Start Lanyard Separation Forces
Shell Straight Pull 15 Degree Pull
Size (lbs. max.) (lbs. max.)
11
13 45 55
15
17
19
21 90 100
23
25
30
HOW TO ORDER - BY MILITARY PART NUMBER
FAIL SAFE D38999/29 & D38999/30
Ordering procedure for example part number
D38999/29FB35EN is shown below:
D38999/ 29 F B 35 E N
D38999/DOD Number
Prefix
Specification
Sheet Number
Service Class
Shell Size Code
Insert Arrangement
Lanyard Length Code
Polarizing Position
DOD Number Prefix
D38999/ designates MIL-DTL-38999,
Series III Tri-Start Connectors
Specification Sheet Number
29 designates Lanyard Release Plug with pin contacts
30 designates Lanyard Release Plug with socket contacts
Service Class
F designates electroless nickel plated aluminum,
optimum EMI shielding effectiveness –65dB @ 10 GHz
specification min., 48 hour salt spray, 200°C
W designates corrosion resistant olive drab cadmium
plate aluminum, 500 hour extended salt spray,
EMI –50dB @ 10 GHz specification min., 175°C
Shell Size Code
MIL-DTL-38999, Sizes 11 thru 25
A* B C D E F G H J MIL Shell Size
9* 11 13 15 17 19 21 23 25 Amphenol
Shell Size
* Shell size 9 not available
Insert Arrangement
MIL-DTL-38999, see insert availability chart on page 29.
Lanyard Length Code
See Table II (page 29) for lanyard length code number.
Polarizing Position
For alternate positions of connector (to prevent cross-
mating) see alternate positioning on page 8. (N indicates
normal)
D38999/29 & D38999/30
TV Breakaway Fail Safe
lanyard release plug – how to order, cont.
88 – 5565 29 – E P
Finish
Connector Type Identification
Shell Size and Insert
Arrangement Code
Lanyard Length Code
Contact Type/Alternate Insert Rotation
Finish
88 designates corrosion resistant olive drab cadmium
plate over nickel, 500 hour extended salt spray,
EMI –50dB @ 10 GHz specification min., 175°C
91 designates electroless nickel plated aluminum,
optimum EMI shielding effectiveness –65dB @ 10 GHz
specification min., 48 hour salt spray, 200°C
These are standard finishes. Consult Amphenol Aerospace,
Sidney, NY for variations.
Connector Type Identification
88/91-5565 designates MIL-DTL-38999, Series III Tri-Start
Lanyard Release Plug
Shell Size and Insert Arrangement Code
Shell sizes are MIL-DTL-38999, Series III from 11 thru 25. The
basic part number selected specifies the insert arrangement.
See Table I (page 29) for coded part number that correlates to
insert arrangement.
Lanyard Length Code
See Table II (page 29) for lanyard length code number.
Contact Type/Alternate Rotations
P designates pin, S designates socket for normal positioning
of contacts. When an alternate position of the connector is
required to prevent cross-mating, a different letter (other than
P or S) is used. See alternate positioning on page 8, then
convert to Amphenol proprietary coding by the following chart.
HOW TO ORDER - BY PROPRIETARY PART NUMBER
FAIL SAFE 88-5565( ) & 91-5565( )
Ordering procedure for example part number 88-556529-EP is
shown below:
Pin Contacts Socket Contacts
MS Letter Amphenol Letter MS Letter Amphenol Letter
PN P (normal) SN S (normal)
PA G SA H
PB I SB J
PC K SC L
PD M SD N
PE R SE T
31
2.008 MAX
51.00 MAX
BLUE
BAND†
1.687 MAX
42.85 MAX
2.030 MAX
51.56 MAX
**
.100 MAX
2.54 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING
THREAD RELEASE
2.000 MAX
50.80 MAX
ACCESS.
DIA
LANYARD LENGTH
(See Lanyard Length Table)
METRIC
THREAD
M37X
1.0-6g0.100R
**
2.000 MAX
50.80 MAX
ACCESS.
DIA
.374 MAX
9.50 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING
THREAD RELEASE .359 MAX
9.12 MAX
2.705 MAX
68.71 MAX
BLUE
BAND†
1.781 MAX
45.24 MAX
2.375 MAX
60.33 MAX
LANYARD LENGTH
(See Lanyard Length Table)
METRIC
THREAD
M37X
1.0-6g
0.100R
.359 MAX
9.12 MAX
D38999/31 for MIL-STD-1760
TV Breakaway Fail Safe – crimp, metal
lanyard release plug
TYPE 6 TYPE 2
Part number reference.
See how to order, page 32 to
complete.
D38999/31
88-555875/76
91-555875/76
88-558518/19
91-558518/19
T3W-16B25-XXXX
Type 6
Type 2
† Blue band indicates rear release
contact retention system
** Lanyard pulled taut against a
.500 ± .13 dia. mandrel
All dimensions for reference only
PIN CONTACTS ONLY,
SHELL SIZE 25 ONLY
BLUE
BAND†
2.000 MAX
50.80 MAX
ACCESS.
DIA
2.008 MAX
51.00 MAX
.359 MAX
9.12 MAX
METRIC
THREAD
M37X
1.0-6g0.100R
.280 MIN
7.11 MIN
FULL
THREAD
LANYARD LENGTH
(See Lanyard Length Table)
2.499 MAX
63.47 MAX
TYPE 1 (LONGER SHELL)
Standard Contact
Shell Arrangement Number Size Service Contact
Size Number of Contacts Contacts Rating Location Pin Socket
3 8 Twinax A , H , K M39029/90-529 M39029/91-530
4 12 Coax 2, 3 M39029/28-211 M39029/75-416
W, 5 M39029/102-558 M39029/103-559
25 -20 13 16 N C, D, E, F, M39029/58-364 M39029/56-352
J, M, N, P
R, T, U, Y, Z
10 20 N B, G, L, S M39029/58-363 M39029/56-351
V, X, 1, 4
6, 7
Insert Service Total Contact Size
Arrangement Rating Contacts 20 10 (power)
25-11 N 11 2 9
Insert Service Total Contact
Arrangement Rating Contacts 20 1 6 12 (coax) 8 (twinax)
25-20 N 30 10 13 4 3
Pin Contact Data for MIL-STD-1760
Contacts for 25-20 Pattern
AB
C
D
E
F
G
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
AB
C
D
E
F
G
HJ
KL
INSERT AVAILABILITY
FAIL SAFE D38999/31
FOR MIL-STD-1760
25-20
Primary Interface Signal Set
Contact
Legend 8 (twinax) 10 (power) 12 (coax) 16 20
25-11
Auxillary Power Signal Set
Type 1
Tri-Start Lanyard Separation Forces
Shell Straight Pull 15 Degree Pull
Size (lbs. max.) (lbs. max.)
25 90 100
32
TABLE III
LANYARD LENGTH CODES
D38999/31 for MIL-STD-1760
TV Breakaway Fail Safe
for Stores Management applications
lanyard release plug – how to order
HOW TO ORDER - BY MILITARY PART NUMBER
FAIL SAFE D38999/31
Ordering procedure for example part number D38999/31WE20PN1 is
shown below:
D38999/ 31 W E 20 P N 1
D38999/DOD Number
Prefix
Specification
Sheet Number
Service Class
Lanyard Length Code
Insert Arrangement
Contact Style
Polarizing Position
Type Number
DOD Number Prefix
D38999/ designates MIL-DTL-38999, Series III Tri-Start Connectors
Specification Sheet Number
31 designates Lanyard Release Plug for MIL-STD-1760
with pin contacts
Service Class
F designates electroless nickel plated aluminum,
optimum EMI shielding effectiveness –65dB @ 10 GHz
specification min., 48 hour salt spray, 200°C
W designates corrosion resistant olive drab cadmium
plate aluminum, 500 hour extended salt spray,
EMI –50dB @ 10 GHz specification min., 175°C
Lanyard Length Code
See Table III for lanyard length code number.
Insert Arrangement
Only 11 or 20 are available contact arrangement numbers.
See page 31.
Contact Style
Only P and A are valid contact style options. P replaces the “no designa-
tion” option in the PIN on revision C and eariler revisions of the Mil-Spec.
A designates supplied less contacts.
Polarizing Positions
N is required for normal position.
Type Number
Type 1, 2 or 6. See drawings on page 31.
For accessories for lanyard release plugs see page 33.
Lanyard Lanyard Lanyard Length
Length (in.) Length (mm.) Code For
± .236 ± 6.0 Part Number
6.024 153.0 E
6.535 166.0 F
7.008 178.0 G
7.520 191.0 H
7.992 203.0 I
8.504 216.0 J
9.016 229.0 K
9.528 242.0 L
33
TV Breakaway Fail Safe – accessories
backshells, dummy contacts, wire combs
Amphenol offers a full range of accesso-
ries that are designed to enhance the per-
formance of Amphenol Breakaway con-
nectors.
Low Profile Backshells in shell size 25 with
the following features:
• Olive drab cadmium finish
• 90 degree termination
• Low profile design with three
heights ranging from 1.010 to 1.660
• Rear access covers to help ease
harness assembly and repairability
• Amphenol part numbers:
10-640000-XXX and 10-559672-XXX
Backshells are offered for use with Breakaway Fail Safe Connectors
in three heights.
Dummy Contacts
• Available in size 12 and size 8
• Provide a cost effective alternative for sealing
unused contact cavities
• Size 8 part number: T3-4008-59P
• Size 12 part number: T3-4012-59P
Wire Combs
• Available for the 25-20 insert pattern to help to
stabilize and prevent contact side loading
• Amphenol part number: 21-33626-XXX
For information on how to order these accessory
products for Breakaway Fail Safe connectors
consult Amphenol Aerospace.
Accessory products for Breakaway Connectors:
Dummy Contacts and Wire Combs
34
B
A.578 MAX
14.68 MAX
B
A
.167 +.010
–.005
4.24 +.25
–.13
6.000 APPROX
152.40 APPROX
.797 MAX
20.24 MAX
B
A
.797 MAX
20.24 MAX
D
6.000 APPROX
152.40 APPROX
*10-553310-XXX
*10-552943-XXX
*10-553970-XXX
3.500 APPROX
88.90 APPROX
*10-553120-XXX
Tri-Star t – accessories
receptacle protection cap
A Thread B D Dia.
Shell Class 2B Dia. +.010
Size 0.1P-0.3L-TS Max –.000
9 .6250 .875 .703
11 .7500 1.000 .844
13 .8750 1.125 1.016
15 1.0000 1.250 1.141
17 1.1875 1.438 1.266
19 1.2500 1.500 1.391
21 1.3750 1.625 1.516
23 1.5000 1.750 1.641
25 1.6250 1.875 1.766
Millimeters
Inches
10-No
Finish Suffix
Olive drab, cadmium,
nickel base
Electroless nickel -XXG
-XX9
MS B D Dia.
Shell Shell Size Dia. +.25
Size Code Max –.00
9 A 22.23 17.86
11 B 25.40 21.44
13 C 28.58 25.81
15 D 31.75 28.98
17 E 36.53 32.16
19 F 38.10 35.33
21 G 41.28 38.51
23 H 44.45 41.68
25 J 47.63 44.86
Consult Amphenol Aerospace for availability
of stainless steel protection caps.
* To complete order number, add shell size and suffix number.
For example, shell size 11 with olive drab cadmium nickel
base, 10-552943-119
All dimensions for reference only.
For MS protection caps, see page 40.
35
.167 +.010
–.005
4.24 +.25
–.13
5.000 APPROX
127.00 APPROX
N
B1.166 MAX
29.62 MAX
5.000 APPROX
127.00 APPROX
N
B1.166 MAX
29.62 MAX
D
*10-552944-XXX
*10-553998-XXX
A Thread D Dia. N
Shell Class 2B +.010 Dia.
Size 0.1P-0.3L-TS –.000 Max
9 .6250 .516 .895
11 .7500 .641 1.000
13 .8750 .766 1.171
15 1.0000 .891 1.299
17 1.1875 1.016 1.436
19 1.2500 1.141 1.543
21 1.3750 1.266 1.670
23 1.5000 1.343 1.787
25 1.6250 1.516 1.914
* To complete order number, add shell size and suffix number.
For example, shell size 11 with olive drab cadmium nickel
base, 10-552944-119
Tri-Star t - accessories
plug protection cap
Inches
10-No
Finish Suffix
Olive drab, cadmium, -XX9
nickel base
Electroless nickel -XXG
All dimensions for reference only.
For MS protection caps, see page 40.
Consult Amphenol Aerospace for availability
of stainless steel protection caps.
Millimeters
MS D Dia. N
Shell Shell Size +.25 Dia.
Size Code –.00 Max
9 A 13.11 22.73
11 B 16.28 25.40
13 C 19.46 29.74
15 D 22.63 32.99
17 E 25.81 36.47
19 F 28.98 39.19
21 G 32.16 42.42
23 H 34.11 45.39
25 J 38.51 48.62
36
Tri-Star t – accessories
dummy receptacle
B Thread
MS Class 2A M T TT
Shell Shell Size 0.1P-0.3L-TS +.020 R1R2S +.008 W +.008
Size Coded (Plated) –.000 ±.010 –.006 ±.010 –.006
9 A .6250 .822 .719 .594 .938 .128 .098 .216
11 B .7500 .822 .812 .719 1.031 .128 .098 .194
13 C .8750 .822 .906 .812 1.125 .128 .098 .194
15 D 1.0000 .822 .969 .906 1.219 .128 .098 .173
17 E 1.1875 .822 1.062 .969 1.312 .128 .098 .194
19 F 1.2500 .822 1.156 1.062 1.438 .128 .098 .194
21 G 1.3750 .791 1.250 1.156 1.562 .128 .125 .194
23 H 1.5000 .791 1.375 1.250 1.688 .154 .125 .242
25 J 1.6250 .791 1.500 1.375 1.812 .154 .125 .242
Millimeters
Inches
10-No
Finish Suffix
Olive drab, cadmium,
nickel base
Electroless nickel -XXG
-XX9
* To complete order number, add shell size and suffix number.
For example, shell size 11 with olive drab cadmium nickel
base, 10-553974-119
MS M T TT
Shell Shell Size +.51 R1R2S +.20 W +.20
Size Code –.00 ±.25 –.15 ±.25 –.15
9 A 20.88 18.26 15.09 23.83 3.25 2.49 5.49
11 B 20.88 20.62 18.26 26.19 3.25 2.49 4.93
13 C 20.88 23.01 20.62 28.58 3.25 2.49 4.93
15 D 20.88 24.61 23.01 30.96 3.25 2.49 4.93
17 E 20.88 26.97 24.61 33.32 3.25 2.49 4.93
19 F 20.88 29.36 26.97 36.53 3.25 2.49 4.93
21 G 20.09 31.75 29.36 39.67 3.25 3.18 4.93
23 H 20.09 34.93 31.75 42.88 3.91 3.18 6.15
25 J 20.09 38.10 34.93 46.02 3.91 3.18 6.15
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
B THREAD
MW
All dimensions for reference only Designates true position dimensioning
Part number reference.
See note below to complete.
* 10-553974-XXX
37
Tri-Star t – accessories
cable clamps
* To complete order number, see suffix chart below. Examples:
Clamp with metal couplng nut for shell size 11 with olive drab cadmium nickel base, 10-552681-119.
10-No
Finish Suffix
Olive drab, cadmium, -XX9
nickel base
Electroless nickel -XXG
F1F2
MS Min. Max. FF KK
Shell Shell Size Dia. Dia. L U Dia. Dia. LL
Size Code Cable Cable Max. Max. Max. Max. Max.
9 A .094 .203 1.431 .656 .347 .629 1.015
11 B .141 .250 1.431 .688 .394 .756 1.062
13 C .172 .323 1.431 .750 .467 .883 1.125
15 D .203 .422 1.431 .859 .566 1.011 1.328
17 E .234 .500 1.431 .937 .644 1.138 1.392
19 F .265 .562 1.431 1.000 .706 1.265 1.453
21 G .297 .625 1.492 1.062 .769 1.393 1.609
23 H .328 .703 1.492 1.141 .847 1.488 1.656
25 J .359 .765 1.492 1.203 .909 1.616 1.719
MS F1F2VFFKK
Shell Shell Size Min. Dia. Max. Dia. L U Thread Dia. Dia. LL
Size Code Cable Cable Max. Max. Metric Max. Max. Max.
9 A 2.39 5.16 36.35 16.66 M12X1-6H 8.81 15.98 25.78
11 B 3.58 6.35 36.35 17.48 M15X1-6H 10.01 19.20 26.97
13 C 4.37 8.20 36.35 19.05 M18X1-6H 11.86 22.43 28.58
15 D 5.16 10.72 36.35 21.82 M22X1-6H 14.38 25.68 33.73
17 E 5.94 12.70 36.35 23.80 M25X1-6H 16.36 28.91 35.36
19 F 6.73 14.27 36.35 25.40 M28X1-6H 17.93 32.13 36.91
21 G 7.54 15.88 37.90 26.97 M31X1-6H 19.53 35.38 40.87
23 H 8.83 17.86 37.90 28.98 M34X1-6H 21.51 37.80 42.06
25 J 9.12 19.43 37.90 30.56 M37X1-6H 23.09 41.05 43.66
Millimeters
Inches
All dimensions for reference only.
FF
L
KK
V THREAD
.270 +.010
–.020
6.86 +.25
–.51
.270 +.010
–.020
6.86 +.25
–.51
V THREAD
KK
FF
LL
U
VIEW AT A
F
1
F
2
F
1
F
2
A
Straight Style
*10-552681-XXX metal coupling
90 Degree Elbow Style
*10-552682-XXX metal coupling
38
Tri-Star t – accessories
universal “header assembly” for flex print or
PC board mounting
Mounts to all MIL-DTL-38999 and
MIL-C-26482 Connectors
The use of connectors with printed circuit ter-
mination is rapidly gaining popularity due to
the rise of high volume, vapor phase or wave
solder manufacturing processes. Termination
of this style of connector to flex print or a
printed circuit board represents a major cost
in the manufacturing process for users. When
adding flex or printed circuit board assem-
blies to an expensive filter or filter/transient
protection connector, the total cost of a failed
solder joint, a bent pin, or an unanticipated electrical failure becomes prohibitive.
The universal header assembly from Amphenol will provide for easy separation
of the connector from the board on these occasions.
Header Assemblies Provide Cost Savings
Incorporation of the header assembly provides the user with time and cost saving
potentials. These header assemblies can be vapor phase or wave soldered to
flex or printed circuit boards prior to the receipt of the EMI/EMP connector.
Headers can be installed to standard connectors, allowing for electrical testing
that would adversely affect the sensitive diodes, MOV’s or capacitors in the
EMI/EMP connectors. Expensive connector assemblies can be easily removed
from and reattached to the header assembly as the manufacturing process
dictates.
Mounting Applications
Shell modifications are recommended, but are not necessary. The header as-
sembly can be attached to connectors with standard flange placement or di-
rectly to the circuit board. The ideal application would involve either a single
flange moved all the way to the rear of the connector or a double flange. Cinch
nuts can be installed in either flange to allow easier mounting to the panel or the
header assembly. The forward flange would mount the connector to the panel;
the rear flange would be used to mount the header assembly. Various types of
captivated or loose attaching screws can be utilized for unique applications.
Amphenol universal headers are slotted to allow mounting to all series of MIL-
DTL-38999 or MIL-C-26482 connectors without special alterations. They are of
similar dimension as the flange of the mounting connector and would be ap-
proximately .185 inches (4.70 mm) thick.
Incorporates a Shorter Pin/Socket Contact
The heart of the header assembly is a short pin/socket contact. The tail of the
contact would accommodate standard through-hole diameters and thickness of
the flex or printed circuit board materials. The socket is imbedded in the molded
material, making electrical engagement with the printed circuit tail of the con-
nector.
Cylindrical Configuration
• 3 PCB stickout dimensions are available.
• Size 22 contacts use .175 thick headers
• Size 16 to 20 contacts use .195 thick
headers
• Consult Amphenol, Sidney NY for additional
configurations.
• Headers for cylindrical connectors accom-
modate up to 128 pins. Consult Amphenol
catalogs for mating connector contact
layouts (12-092 and 12-090 for MIL-DTL-
38999 and 12-070 for MIL-C-26482)
Mounting to Rectangular ARINC Con-
nectors
• Headers for ARINC connector arrangements
accommodate up to 150 pins
• Consult Amphenol, Sidney, NY for ARINC
configurations and detailed dimensions.
Materials
• Body is molded from Torlon or PPS
(Polyphenylene Sulfide)
• Electrical engagement areas of the header
contact are plated with .00003 inches
minimum of gold over .00005 inches
minimum of nickel.
See drawing of standard header on next page.
Headers provide easy
separation of the
connector from the PC
board.
39
R2
R1
S
T
TT
VISUAL
INDICATOR NOTCH
FOR TOP C OF
INSERT PATTERN
(SIZE & CONFIGURATION
OPTIONAL)
L
F RADIUS B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
G
.020 ± .001
.040 ± .001 (SIZE 20)
.0625 ± .0010 (SIZE 16)
B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
.050
G
SIZE 22
CONT A CT VIEW
SIZE 16 AND 20
CONT A CT VIEW
NOTE:
Size 22 accepts .018 to .022 dia. PCB tails.
Size 16 accepts .048 to .064 dia. PCB tails.
Size 20 accepts .037 to .043 dia. PCB tails.
Tri-Star t – accessories
universal “header assembly” for flex pr int or
PC board mounting, cont.
The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482 connectors.
Consult Amphenol Aerospace, Sidney NY for drawings of headers for ARINC configurations.
Assembly Shell F G S T R1 R2 TT
Part Number S ize Radius ± .005 ± .005 + .008 TP† TP† + .008
– .006 – .006
21-904008-XX( ) 8/9 .094 .938 .128 .719 .594 .216
21-904010-XX( ) 10/11 .094 1.031 .128 .812 .719 .194
21-904012-XX( ) 12/13 .094 1.125 .128 .906 .812 .194
21-904014-XX( ) 14/15 .125 1.219 .128 .969 .906 .173
21-904016-XX( ) 16/17 .125 1.312 .128 1.062 .969 .194
21-904018-XX( ) 18/19 .125 1.438 .128 1.156 1.062 .194
21-904020-XX( ) 20/21 .125 1.562 .128 1.250 1.156 .194
21-904022-XX( ) 22/23 .125 1.688 .154 1.375 1.250 .242
21-904024-XX( ) 24/25 .125 1.812 .154 1.500 1.375 .242
Assemblies containing Siz e 22 contacts only: .175
Assemblies containing Siz e16 or 20 contacts: .195
See Suffix Chart
† TP designates true position dimensioning.
ASSEMBLY NUMBER SUFFIX CHART
Shell Size Arrang ement Contact
Designation* Number PCB Stickout**
Suffix*** Suffix B ± .015
Stickout
08 1 .120
10 2 .185
12 3 .270
14
16
18
20
22
24
Insert
Arrangement
Suffix
from
MIL-STD-1560
or MIL-STD-1669
HOW TO ORDER INFORMATION
For Universal Adapter Used with MIL-DTL-38999 Connectors
Use coded number as follows: 21-9040 XX - XX X
Designates Amphenol
Interface Adapter
Shell size designation for
MIL-DTL-38999 Series III.
See Suffix char t.
Arrangement number - See MIL-STD-1560
or MIL-STD-1669. See inser t availability char ts on
pages 6 and 7.
Contact PCB Stickout designation
See Suffix char t.
Universal adapters are also used with MIL-DTL-38999 Series I and II and with MIL-C-26482,
Series 1 and 2. For ho w to order inf ormation on adapters to be used with ARINC connectors,
consult Amphenol, Sidney NY.
*Shell size designation f or MIL-DTL-38999 Series I, II, III and IV and
MIL-C-26482 Series 1 and 2.
Examples: Shell siz e 9 use 08. Shell size 25 use 24.
** Size 22 contacts available in all 3 stick out lengths .
Size 16 and 20 contacts a v ailab le only in .185 and .270 lengths.
*** Insert arrangement 14-97 and 15-97 are not a v ailable at this time .
Consult Amphenol, Sidney NY f or information.
40
Tri-Star t – accessories
contacts, sealing plugs, protection caps
STANDARD 500 CYCLE CONTACTS FOR TV AND CTV, P & S
Contact TV/CTV Pins TV/CTV Sockets
Size Military No. Supersedes Military No. Supersedes
8 (Coax)* M39029/60-367 MS27536 M39029/59-366 MS27535
8 (Power) N/A N/A N/A N/A
8 (Twinax) M39029/90-529** N/A M39029/91-530 N/A
10 (Power) M39029/58-528 N/A M39029/56-527 N/A
12 M39029/58-365 MS27493-12 M39029/56-353 MS27490-12
16 M39029/58-364 MS27493-16 M39029/56-352 MS27490-16
20 M39029/58-363 MS27493-20 M39029/56-351 MS27490-20
22D M39029/58-360 MS27493-22D M39029/56-348 MS27490-22D
4 N/A N/A N/A N/A
0 N/A N/A N/A N/A
1500 CYCLE CONTACTS FOR CTV, CLASSES H & J
Contact CTV Pins CTV Sockets
Size Proprietary No Military No Supersedes Proprietary No Military No Supersedes
12 10-597072-2X M39029/107-623 – 10-597073-2X M39029/106-617 –
16 10-597068-2X M39029/107-622 – 10-597069-2X M39029/106-616 –
20 10-597064-2X M39029/107-621 – 10-597065-2X M39029/106-615 –
22D 10-597058-3X M39029/107-620 – 10-597061-2X M39029/106-614 –
PLASTIC PROTECTION CAPS MS METAL PROTECTION CAPS
SEALING PLUGS
Shell Plug Rececptacle
Size
9 10-70506-14 10-70500-10
11 10-70506-16 10-70500-12
13 10-70500-18 10-70500-14
15 10-70500-20 10-70500-16
17 10-70500-22 10-70500-19
19 10-70500-24 10-70500-20
21 10-70524-1 10-70500-22
23 10-70506-28 10-70500-24
25 10-70500-28 10-70524-1
Contact Proprietary Military
Size No. No.
8 (Coax) 10-482099-8 N/A
8 (Twinax) T3-4008-59P N/A
8 (Power) 10-405996-81 MS27488-8-1
10 (Power) 10-576225 N/A
12 10-405996-121 MS27488-12-1
16 10-405996-161 MS27488-16-1
20 10-405996-201 MS27488-20-1
22D 10-405996-221 MS27488-22-1
4 10-405996-41 MS27488-4-1
0 10-405996-01 MS27488-0-1
Above part numbers include standard 500 cycle finish designation - gold plating over suitable
underplate in accordance with MIL-C-39029. For other finish variations, consult Sidney, NY.
*For use with RG180B/U and RG195A/U cable. For other size 8 coax or optional sizes 12
and 16 coax contacts available for use in Tri-Start connectors, see catalog 12-130 or consult
Amphenol, Sidney, NY
* To complete order number, replace X with applicable letter as follows:
R - designates eyelet type
N - designates washer type
MS metal protection caps are supplied with service class W which designates
corrosion resistant olive drab cadmium plate aluminum.
Consult Amphenol, Sidney, NY for more detailed information on ordering MS
Metal protection caps.
Shell MS Shell MS Plug MS Receptacle
Size Size Code Protection Cap Protection Cap
9 A D38999/32W9X* D38999/33W9X*
11 B D38999/32W11X* D38999/33W11X*
13 C D38999/32W13X* D38999/33W13X*
15 D D38999/32W15X* D38999/33W15X*
17 E D38999/32W17X* D38999/33W17X*
19 F D38999/32W19X* D38999/33W19X*
21 G D38999/32W21X* D38999/33W21X*
23 H D38999/32W23X* D38999/33W23X*
25 J D38999/32W25X* D38999/33W25X*
** For use with M17/M176-00002 cable.
† Optional design - see slash sheet MS39029.
For other contact options available for use in Tri-Start connectors,
(wire wrap, thermocouple, fiber optic) consult Amphenol. Wire wrap
data given on next page.
41
SOCKETS PINS
Contact Stickout Max/Min
(See Illustration below)
PCB D38999/24
Socket Tail D38999/20 D38999/26 TV07
Contacts Size Dia TVP00 TV06 Metal Composite
10-497623-15 22D .019 .291 .316 .285 .242
.226 .251 .222 .182
10-497623-25 22D .019 .868 .893 .862 .819
.803 .828 .802 .759
10-497623-35 22D .019 .348 .373 .342 .299
.283 .308 .282 .239
10-497623-45 22D .019 .208 .233 .202 .159
.143 .168 .142 .099
10-497623-75 22D .019 .146 .171 .140 .097
.081 .106 .080 .037
10-497623-105 22D .019 .028 .053 .022 .021
NS .000 NS NS
10-497623-145 22D .019 .609 .634 .603 .560
.539 .564 .538 .495
10-497623-155 22D .019 .423 .448 .417 .374
.358 .383 .357 .314
10-497643-15 20 .019 .348 .373 .342 .299
.294 .319 .293 .250
10-497643-25 20 .019 .213 .238 .207 .164
.159 .184 .158 .115
10-497643-35 20 .019 .555 .580 .549 .506
.501 .526 .500 .457
10-497643-45 20 .019 .138 .163 .132 .089
.084 .109 .083 .040
10-497650-15 16 .040 .255 .280 .249 .206
.201 .226 .200 .157
Wire Wrap Tail
Contacts Square
10-497577-15 22D .025 .155 .180 .149 .106
.090 .115 .089 .046
10-497577-25 22D .025 .002 .027 NS NS
NS NS NS NS
10-897577-35 22D .025 .201 .226 .195 .152
.136 .161 .135 .092
10-497577-55 22D .025 .566 .591 .560 .517
.501 .526 .500 .457
10-497621-15 20 .025 .151 .176 .145 .102
.101 .126 .100 .057
10-497621-25 20 .025 .605 .630 .599 .556
.555 .580 .554 .511
10-497621-35 20 .025 .308 .333 .302 .259
.258 .283 .257 .214
Contact Stickout Max/Min
(See Illustration below)
PCB D38999/24
Pin Tail D38999/20 D38999/26 TV07
Contacts Size Dia TVP00 TV06 Metal Composite
10-407552-15 22M .019 .335 .360 .329 .286
.280 .305 .279 .236
10-407552-55 22M .019 .224 .249 .218 .175
.169 .194 .168 .125
10-407552-85 22M .019 .060 .085 .054 .011
.010 .035 .009 NS
10-407552-95 22M .019 NS NS NS NS
10-407552-115 22M .019 .002 .023 NS NS
NS NS
10-497640-15 20 .019 .348 .373 .342 .299
.298 .323 .297 .254
10-497640-25 20 .019 .213 .238 .207 .164
.163 .188 .162 .119
10-497640-45 20 .019 NS NS NS NS
10-497640-65 20 .019 .138 .163 .132 .089
.088 .113 .087 .044
10-497596-15 20 .025 .058 .083 .052 .009
.012 .037 .011 NS
10-497596-25 20 .025 .148 .173 .142 .099
.102 .127 .101 .058
10-497596-35 20 .025 .229 .254 .223 .180
.183 .208 .182 .139
10-497596-55 20 .025 .346 .371 .340 .297
.300 .325 .299 .256
10-497695-15 16 .040 .255 .280 .249 .206
.205 .230 .204 .161
10-497630-25 16 .062 .348 .373 .342 .299
.298 .323 .297 .254
10-497630-35 16 .062 .060 .085 .054 .011
.010 .035 .009 NS
10-497630-45 16 .062 .108 .133 .102 .059
.062 .087 .061 .018
10-597502-15 12 .081 .228 .252 .222 .179
.178 .203 .177 .134
Wire Wrap Tail
Contacts Square
10-407572-15 22D .025 .014 .498 .008 NS
NS .007 NS NS
10-407572-35 22D .025 .155 .180 .149 .106
.105 .130 .104 .061
10-407572-45 22D .025 .255 .280 .249 .206
.205 .230 .204 .161
10-407572-75 22D .025 .521 .546 .515 .472
.475 .500 .474 .431
10-407584-25 20 .025 .605 .630 .599 .556
.559 .584 .558 .515
10-407584-35 20 .025 .308 .333 .302 .259
.262 .287 .261 .218
All dimensions for reference only.
Consult Sidney, NY for specific contact
contour stickout data.
NS designates No Stickout.
See also catalog 12-170, Amphenol
Cylindrical Connectors for PCB
Applications. This catalog provides the
most commonly used insert pattern
pin-out drawings which have been
tooled for the purpose of attaching
cylindrical connectors to printed circuit
boards.
PCB Socket and pin part numbers include finish designation - gold plating over
suitable underplate in accordance with MIL-C-39029. For other finish variations,
consult Amphenol, Sidney, NY.
Note: 22M and 22D contacts are interchangeable.
For other contact options available for use in Tri-Start connectors (thermocouple,
fiber optic), consult Amphenol, Sidney, NY.
Tri-Start
contacts – printed circuit board, wire wrap
CONTACT
STICK OUT MAX/MIN
42
Where 2 or 3 tools are listed for a contact size, only one tool and its die or
positioner are required to crimp the contact.
The above crimping tools and positioners are available from the approved tool
manufacturer.
Tri-Start
application tools
The following data includes information pertaining to the appli-
cation tools which have been established for crimping, inserting,
and removing contacts incorporated in the TV, CTV and MIL-
DTL-38999 Series III connectors. For additional information on
coax, twinax and triax contact tools see catalog 12-130.
All crimping tools included are the “full cycling” type and when
used as specified in the installation instructions (L-624 and L-
844) covering the TV, CTV and MS series connectors, will pro-
vide reliable crimped wire to contact terminations. There is a
possibility of additional crimping tools other than those included
being available at present or in the future for this specific appli-
cation.
CRIMPING TOOLS
INSERTION TOOLS
REMOVAL TOOLS
Contact Crimping Turret Die
Size/Type Tool or Positioner
12 Pin and Socket M22520/1-01 M22520/1-04
16 Pin and Socket M22520/1-01 M22520/1-04
M22520/7-01 M22520/7-04
20 Pin and Socket M22520/1-01 M22520/1-04
M22520/2-01 M22520/2-10
M22520/7-01 M22520/7-08
22D Pin M22520/2-01 M22520/2-09
M22520/7-01 M22520/7-07
22D Socket M22520/2-01 M22520/2-07
M22520/7-01 M22520/7-05
8 Twinax Center M22520/2-01 M22520/2-37
Pin and Socket
8 Twinax Intermediate M22520/5-01 M22520/5-200
Outer Pin & Socket
Contact Crimping Turret Die
Size/Type Tool or Positioner
8 Coaxial Inner M22520/2-01 M22520/2-31
Pin and Socket M22520/5-01 M22520/5-05
Die Closure B
8 Coaxial Outer Pin M22520/5-01 M22520/5-41
and Socket Die Closure B
M22520/10-01 M22520/10-07
Die Closure B
16 Coaxial Inner M22520/2-01 M22520/2-35
Pin and Socket
16 Coaxial Outer M22520/4-01 M22520/4-02
Pin and Socket
12 Coaxial Inner M22520/2-01 M22520/2-34
Pin and Socket
12 Coaxial Outer M22520/31-01 M22520/31-02
Pin and Socket
10 (Power) TP201423 1716P-1
Plastic Tools Metal Tools
For Unwired Angle Type
Use with Contacts Straight Type
Contact MS Proprietary MS Proprietary Proprietary
Size Part Number Color Part Number Part Number Part Number Part Number Color
10 (Power) M81969/14-05* (Gray) / White † M81969/8-12 † † Green / White
12 M81969/14-04* (Yellow) / White 11-10050-11 M81969/8-10 11-8675-12 11-8795-12 Yellow / White
16 M81969/14-03* (Blue) / White 11-10050-10 M81969/8-08 11-8675-16 11-8795-16 Blue / White
20 M81969/14-10* (Orange) / Red 11-10050-9 M81969/8-06 11-8675-20 11-8795-20 Red / Orange
22D M81969/14-01* (Green) / White 11-10050-7 M81969/8-02 11-8675-24 11-8795-24 Green / White
8 Coaxial M81969/14-12 Green None None 11-9170 DRK264-8†† N/A
8 Twinax M81969/14-12 Green None M81969/46-12** 11-9170 N/A N/A
Plastic Tools Metal Tools
Use with Angle Type Straight Type
Contact MS MS Proprietary Proprietary
Size Part Number Color Part Number Part Number Part Number Color
10 (Power M81969/14-05* Gray / (White) M81969/8-11 † † Green
12 M81969/14-04* Yellow / (White) M81969/8-09 11-8674-12 11-8794-12 Yellow
16 M81969/14-03* Blue / (White) M81969/8-07 11-8674-16 11-8794-16 Blue
20 M81969/14-10* Red / (Orange) M81969/8-05 11-8674-20 11-8794-20 Red
22D M81969/14-01* Green / (White) M81969/8-01 11-8674-24 11-8794-24 Black
8 Coaxial None Required
8 Twinax None M81969/46-06** None Red
The M81969/8, 11-8674, 11-8675, and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside
diameter as follows: Contact size 12: dia. is .155, size 16: dia. is .109, size 20: dia. is .077, size 22D: dia. is .050. When wire diameters exceed those
specified, the plastic tools must be used. † To be determined.
†† Contact Daniels Manufacturing Co.
for availability.
* Double end insertion/removal tool.
** Twinax insertion tools are available only in a straight type, metal version.
43
Tri-Start
how to order – (Amphenol® TV, metal)
how to order – (Amphenol® TV26 CLUTCH-LOK®)
Connector T ype
TV designates T ri-Start Series Connector
TVP designates back panel mounted receptacle
TVS designates 200°C rated
TVPS designates back panel mounted, 200°C rated receptacle
MTV designates CLUTCH-LOK connector with “MS” stamping
(Note: remove dashes in how to order part number when
ordering CLUTCH-LOK)
Shell Style
00 designates wall mount receptacle
01 designates line receptacle
02 designates box mount receptacle
06 designates straight plug
26 designates proprietary CLUTCH-LOK high vibration straight
plug (available in service classes RK and RS only)
07 designates jam nut receptacle
09 designates flange mounted plug
I Y designates solder mounted receptacle, hermetic only
HI Y designates weld mounted receptacle, hermetic only
Service Class
R X alternate finish, requires special variation suffix. Example:
non-conductive, anodic coated aluminum is defined by
variation suffix 005. Consult Amphenol, Sidney NY for
details, options and availability of non-cadmium or nickel
finishes.
RF electroless nickel plated aluminum, optimum EMI
shielding effectiveness –65dB @ 10GHz specification
min., 48 hour salt spray, 200°C
RGF** electroless nickel plated ground plane aluminum, 200°C
RGW** olive dr ab cadmium plated g round plane alumin um, 175°C
RK* corrosion resistant stainless steel, firewall capability, plus
500 hour salt spray resistance, EMI –45 dB @ GHz
specification min., 200°C
RW corrosion resistant olive drab cadmium plate aluminum,
500 hour extended salt spray, EMI –50 dB @ 10 GHz
specification min., 175°C
RQF same as RF except with Quadrax contacts
RGQF same as RGF except with Quadrax contacts
RGQW same as RGW except with Quadrax contacts
RQ K same as RK except with Quadrax contacts and not
firew all capab le
RQW same as RW except with Quadrax contacts
Y hermetic seal, passivated stainless steel, 200°C
RS* (non-hermetic connectors), nickel plated stainless
steel, optimum EMI shielding effectiveness –65dB
@ 10 GHz specification min., 500 hour salt spray,
200°C , firewall barrier
Y N (hermetic connectors), nickel plated stainless steel,
200°C
DN Durmalon plated, Nickel-PTFE alternative to Cadmium.
Corrosion resistant, 1,000 hour salt spray , EMI- 50dB at
10GHz specification min., 175 degrees
Shell Size
MIL-DTL-38999, Sizes 9-25.
TVPS 00 RF - 9 -35 P B (XXX)
Connector T ype
Shell Style
Service Class
Shell Size
Insert Arrang ement
Contact T ype
Alternate Positions
Special V ariations
Proprietary P art Number
* Coaxial arrangements are not av ailable in these classes .
** For more inf ormation on Coax/Triax/Twinax Ground Plane
Connectors see page 49.
A B C D E F G H J MIL Shell Size
9 11 13 15 17 19 21 23 25 Amphenol
Shell Size
Insert Arrang ement
MIL-DTL-38999, see insert arrangement charts, pgs. 6 & 7.
Contact T ype
P designates pin contacts
S designates socket contacts
Alternate Positions
Locksmith keying - rotation of minor keys. See page 8.
“N” not required for normal position.
Special V ariations
Consult Amphenol Aerospace, Sidney, NY for variations.
Amphenol® Tri-Start Connectors (metal) can be ordered by coded par t number.
Ordering procedure is illustrated by part number TVPS00RF-9-35PB( ) as shown below:
44
Tri-Start
how to order – (D38999, TV military, metal)
how to order – (MTV26 CLUTCH-LOK®)
Connector T ype
D38999/ designates MIL-DTL-38999 Ser ies III Connector
MTV designates militar y D38999/26 CLUTCH-LOK high vibration
straight plug (available in service class RK only)
Shell Style
20 designates wall mount receptacle
21 designates box mount receptacle, hermetic
23 designates jam nut receptacle, her metic
24 designates jam nut receptacle
25 designates solder mount receptacle, her metic
26 designates straight plug
27 designates weld mount receptacle, hermetic
Lanyard Release Connectors (See pages 28-32 for ordering)
29 designates lanyard release plug with pin contacts
30 designates lanyard release plug with socket contacts
31 designates lanyard release plug for MIL-STD-1760 with
pin contacts
Protection Caps (See page 40 for ordering MS protection caps)
32 designates plug protection cap
33 designates receptacle protection cap
Service Class
C non-conductive, anodic coated aluminum, 500 hour salt
spray, 200°C
F electroless nickel plated aluminum, optimum EMI
shielding effectiveness –65dB @ 10GHz specification
min., 48 hour salt spray, 200°C
G space grade, electroless nickel, 48 hour salt spray, 200°C
K corrosion resistant stainless steel, firewall capability, plus
500 hour salt spray resistance, EMI –45 dB @ GHz
specification min., 200°C
L corrosion resistant steel, electrodeposited nickel, 48 hour
salt spray, 200°C
W corrosion resistant olive drab cadmium plate aluminum,
500 hour extended salt spray, EMI –50 dB @ 10 GHz
specification min., 175°C
Y her metic seal, passivated stainless steel, 200°C
S (non-her metic connectors), nickel plated stainless
steel, optimum EMI shielding effectiveness –65dB
@ 10 GHz specification min., 500 hour salt spray,
200°C
N (her metic connectors), nickel plated stainless steel,
200°C
Shell Size
MIL-DTL-38999, Sizes 9-25.
D38999/ 20 F A 35 P B
Connector T ype
Shell Style
Service Class
Shell Size
Insert Arrang ement
Contact T ype
Alternate Positions
Military Part Number
To more easily illustrate ordering procedure of Tri-Start Connectors (metal) by military
designation, par t number D38999/20F A35PB is shown as follows:
A B C D E F G H J MIL Shell Size
9 11 13 15 17 19 21 23 25 Amphenol
Shell Size
Insert Arrang ement
MIL-DTL-38999, see insert arrangement charts, pgs. 6 & 7.
Contact Type
P designates pin contacts
S designates socket contacts
A designates same as “P” except supplied less pin
contacts
B designates same as “S” except supplied less socket
contacts (A & B designates non-standard contact
applications)
X designates eyelet contacts, hermetics only
Alternate Positions
Locksmith keying - rotation of minor keys. See page 8.
Use N for normal.
Special Variations
Consult Amphenol Aerospace, Sidney, NY for variations.
45
Connector T ype
CTV designates Tr i-Star t Ser ies Connector
CTVP designates panel mounted receptacle
CTVS designates 200°C rated
CTVPS designates panel mounted, 200°C rated receptacle
Shell Style
00 designates wall mount receptacle
01 designates line receptacle
02 designates box mount receptacle*
06 designates straight plug
07 designates jam nut receptacle
Service Class
RF electroless nickel plated composite, 200°C, 2000 hour
salt spray
RW olive drab cadmium plated composite, 175°C
RGF** electroless nickel plated ground plane composite,
200°C
RGW** olive drab cadmium plated ground plane composite,
175°C
RQF same as RF composite except with Quadrax contacts
RQW same as RW composite except with Quadrax contacts
RGQF same as RGF composite except with Quadrax contacts
RGQW s am e as RGW composite except with Quadrax contacts
DN Durmalon plated, Nickel-PTFE alternative to Cadmium.
Corrosion resistant, 1,000 hour salt spray , EMI- 50dB at
10GHz specification min., 175 degrees
Shell Size
9 thru 25 available
Insert Arrang ement
MIL-DTL-38999, see inser t arrangement charts, pgs. 6 &7.
Contact T ype
H designates 1500 cycle pin contacts
J designates 1500 cycle socket contacts
P designates 500 cycle pin contacts
S designates 500 cycle socket contacts
Alternate Positions
Locksmith keying - rotation of minor keys. “N” not required
for nor mal position, see page 8.
CTVPS 00 RF – 9 – 35 P B
Connector T ype
Shell Style
Service Class
Shell Size
Insert Arrang ement
Contact T ype
Alternate Positions
Proprietary P art Number
* Consult Amphenol Aerospace, Sidney, NY for av ailability.
** For more inf ormation on Coax/Triax/Twinax Ground Plane Connectors
see page 49.
Tri-Start
how to order – (Amphenol® CTV, composite)
Amphenol® Tri-Start Composite Connectors can be ordered by coded par t number.
Ordering procedure is illustrated by part number CTVPS00RF-9-35PB as shown below:
Amphenol® Federal V endor Identification/FSCM 77820
46
Connector T ype
D38999/ designates MIL-DTL-38999 Ser ies III Connector
Shell Style
20 designates wall mount receptacle
24 designates jam nut receptacle
26 designates straight plug
(Consult Amphenol Aerospace for availability of composite box
mount receptacles)
Service Class
J olive drab cadmium plate (175°C),
2000 hrs. dynamic salt spray
M electroless nickel plate (200°C),
2000 hrs. dynamic salt spray
Shell Size
MIL-DTL-38999, Sizes 9-25
Insert Arrang ement
MIL-DTL-38999, see inser t arrangement charts, pg. 6 & 7.
Contact T ype
H designates 1500 cycle pin contacts
J designates 1500 cycle socket contacts
P designates 500 cycle pin contacts
S designates 500 cycle socket contacts
A designates same as “P” except supplied less pin
contacts
B designates same as “S” except supplied less socket
contacts
(A & B designate non-standard contact applications)
Alternate Positions
Locksmith keying - rotation of minor keys. See page 8.
(Use N for normal)
D38999/ 20 J G 35 P N
Connector T ype
Shell Style
Service Class
Shell Size
Insert Arrang ement
Contact T ype
Alternate Positions
Military Part Number
To more easily illustrate ordering procedure of Tri-Start Composite Connectors by military
designation, par t number D38999/20JG35PN is shown as follows:
Tri-Start
how to order – (D38999, CTV military, composite)
A B C D E F G H J MIL Shell Size
9 11 13 15 17 19 21 23 25 Amphenol
Shell Size
47
Tri-Start
weight comparisons (composite vs. metal)
Wall Mount Receptacle (00) Jam Nut Receptacle (07) Plug (06)
Size/ Stainless Stainless Stainless
Arrange- Steel Aluminum Composite Steel Aluminum Composite Steel Aluminum Composite
ment Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket
9-35 .7216 .7840 .3248 .3777 .2588 .3121 1.1472 1.2096 .4416 .5040 .3489 .4413 1.0736 1.1360 .4236 .4625 .2606 .2994
9-98 .7216 .7776 .2496 .3056 .1664 .2224 1.1472 1.2032 .4416 .4976 .3744 .4640 1.0736 1.1296 .3968 .4624 .2991 .2337
11-35 .9488 1.0800 .3632 .4960 .2753 .4081 1.4304 1.5632 .5936 .7264 .4679 .6007 1.2480 1.3808 .5312 .6389 .3450 .4582
11-98 .9488 1.0620 .3632 .4768 .2753 .3889 1.4304 1.5440 .5936 .7072 .4679 .5815 1.2480 1.3616 .5330 .6283 .3468 .4457
13-8 1.2096 1.3888 .4800 .6592 .3696 .5488 1.9104 2.0896 .7664 .9456 .6560 .8352 1.8048 1.9840 .7936 .9728 .5237 .5952
13-35 1.2160 1.4320 .4864 .7024 .3762 .5922 1.9168 2.1328 .7728 .9888 .6136 .8296 1.8112 2.0272 .8000 .8472 .5301 .6531
13-98 1.2160 1.4016 .4864 .6720 .3762 .5618 1.9168 2.1024 .7728 .9584 .6136 .7992 1.8112 1.9968 .7978 .9856 .5244 .7157
15-5 1.5312 1.7904 .6352 .8944 .5027 .7619 2.3792 2.6384 .9728 1.2320 .7749 1.0341 2.2704 2.5456 .9632 1.1719 .6450 .8467
15-18 1.5456 1.8416 .7760 .9456 .6432 .8128 2.3936 2.6896 .9872 1.2832 .8544 1.1504 2.2848 2.5808 .9776 1.2736 .6594 .8208
15-35 1.5424 1.8768 .6464 .9808 .5139 .8483 2.3904 2.7344 .9840 1.3280 .7861 1.1301 2.2816 2.6256 1.2179 1.3184 .8961 1.0002
17-6 2.1488 2.5904 .9360 1.3776 .7812 1.2228 2.9152 3.3568 1.2336 1.6752 .9940 1.4356 2.5008 3.1024 1.1408 1.7424 .8160 1.4176
17-26 2.1344 2.5600 .9216 1.3472 .7668 1.1924 2.9008 3.3264 1.2192 1.6448 .9796 1.4052 2.4864 2.9120 1.1264 1.3343 .8017 .8062
17-35 2.1360 2.6640 .9232 1.4512 .7684 1.2964 2.9024 3.4304 1.2208 1.7488 .9812 1.5092 2.4880 3.0160 1.1280 1.5497 .8033 1.2144
19-11 2.2592 2.6656 .9696 1.4528 .7925 1.2757 3.4352 3.9184 1.4720 1.9552 1.2033 1.6865 2.9808 3.4640 1.3472 1.8304 .9632 1.4464
19-32 2.1888 2.7264 .9760 1.5136 .7989 1.3365 3.4416 3.9792 1.4784 2.0160 1.2097 1.7473 2.9872 3.5248 1.3536 1.8912 .9696 1.5072
19-35 2.1920 2.8432 .9792 1.6304 .8021 1.4533 3.4448 4.0960 1.4816 2.1328 1.2129 1.8641 2.9904 3.6416 1.3568 2.0080 .9728 1.6240
21-11 2.7456 3.4640 1.3088 2.0272 1.1088 1.8272 3.9712 4.6896 1.8128 2.5312 1.6128 2.3312 3.4448 4.1632 1.7344 2.5312 1.3039 1.8710
21-16 2.6784 3.3168 1.2416 1.8800 1.0422 1.6806 3.9040 4.5424 1.7456 2.3840 1.4505 2.0889 3.3776 4.0160 1.6672 2.3168 1.2352 1.8736
21-35 2.6672 3.4992 1.2304 2.0624 1.0310 1.8630 3.8928 4.7248 1.7344 2.5664 1.4393 2.2713 3.3664 4.1984 1.6560 2.2309 1.2255 1.8003
21-41 2.6768 3.3600 1.2400 1.9232 1.0406 1.7238 3.9024 4.5856 1.7440 2.4272 1.4489 2.1321 3.3760 3.5792 1.6656 1.8688 1.2336 1.4368
23-21 3.0352 3.8624 1.4496 2.2768 1.2279 2.0551 4.2368 5.0640 1.9440 2.7712 1.6368 2.4640 3.7920 4.6192 1.9216 2.7488 1.4637 2.2896
23-35 3.0240 4.0448 1.4384 2.4592 1.2167 2.2375 4.2256 5.2464 1.9328 2.9536 1.6256 2.6464 3.7808 4.8016 1.9104 2.6087 1.4525 2.1507
23-53 2.8992 3.9072 1.4560 2.4816 1.2343 2.2599 4.2432 5.1088 1.9504 2.8160 1.6432 2.5088 3.7984 4.6640 1.9280 2.7936 1.4672 2.2384
25-4 3.4512 4.4800 1.7312 2.8816 1.4864 2.1904 4.8048 5.8272 2.2016 3.2480 1.9568 2.8720 4.2224 5.2496 2.2128 3.2560 1.7133 2.4163
25-19 3.5312 4.7264 1.8112 3.0064 1.5664 2.7616 4.8848 6.0816 2.2816 3.4784 2.0368 3.2336 4.3024 5.4992 2.2928 3.4896 1.7933 2.7058
25-20 3.8190 4.7150 2.0173 3.1125 1.7733 2.8512 5.1430 6.0380 2.4877 3.5421 2.1872 3.2416 4.4350 5.3300 2.2580 3.0182 1.8288 2.8928
25-35 3.4416 4.6656 1.7216 2.9456 1.4776 2.7016 4.7952 6.0192 2.1920 3.4160 1.8915 3.1155 4.2128 5.4368 2.2032 3.4272 1.7037 2.9277
25-61 3.4304 4.4848 1.7282 2.7648 1.4841 2.5208 4.7840 5.8384 2.1808 3.2352 1.8803 2.9347 4.2016 5.2560 2.1920 3.2464 1.6912 2.7456
Tri-Start Weight in ounces (includes contacts)
All weight measurements are for reference only.
Depending on the shell style, shell size and contact count, weight savings can range
from 17% to 40% compared to standard aluminum product.
48
Tri-Star t – specials
fiber optics, filter protection, PCB applications
FIBER OPTIC
Amphenol multi-channel fiber optic connectors offer a precision optic
interconnect system within the high performance MIL-DTL-38999
Series III connector. The metal-to-metal feature of the Tri-Start
connector provides protection from damage in severe environmental
and physical conditions. Optical performance is optimized utilizing the
ceramic alignment features
employed by the termini. Insertion
losses are typically .8dB and can
range from .5 to 1.5 dB, depending
on test conditions.
Ask for publication 12-352 for
complete information on Fiber
Optic Connectors.
TRANSIENT PROTECTION
EMI/EMP protection devices can
be integrated into the MIL-DTL-
38999 Series III connector to
provide a cost effective alternative to discrete devices mounted inside
the box. These unique, high performance designs provide weight and
space savings necessary for modern electronic systems.
Ask for publication 12-120 for complete information on Amphenol
Filter/Transient Protection Connectors.
FLEX TERMINATION ASSEMBLIES FOR
PRINTED CIRCUIT BOARD APPLICATIONS
Amphenol provides flex termination assemblies for printed circuit
board attachment through Amphenol ACT, Advanced Circuit Techno-
logy. Flex circuits are available for MIL-DLT-38999 connectors in flat or
sculptured styles. Sculptured® Flexible Circuits with built-in termina-
tions eliminate the failures associated with crimped or solder-on
contacts, and they are designed to geometrically fit the tight space
requirements within a unit. They
plug into a printed circuit board and
create a self-locking terminal pad
which eliminates the need for an
additional interconnect to the PCB.
TRI-START CONNECTORS
WITH PC TAIL CONTACTS
Printed circuit tail twinax contacts
are currently supplied in 8, 12 and
16 coax type, 8, 10 and 12 twinax
type, and 8 triax socket type. These
provide a cost effective packaging
solution for limited space applica-
tions where connectors are
attached to printed circuit boards.
Ask for catalog 12-170, Amphenol
Cylindrical Connectors for PCB
Applications and catalog 12-130,
Amphenol High Frequency Contacts
for Multi-pin Connectors.
Multi-Channel
Fiber Optic Connectors
Filter/Transient Protection Connectors
Flex Termination Assemblies
Tri-Start Connectors
with MT Ferrule Fiber Optics
PC Tail Contacts
49
Tri-Star t – specials
coax, twinax and triax contacts,
ground plane connectors, press fit connectors
Amphenol MIL-DTL-38999 Series III connectors are the most
commonly used connectors for incorporation of shielded contacts
along with traditional crimp contacts and also with contacts for data
bus, LAN and coax/triax/twinax transmission lines with conductive
inserts that ground the outer conductor of the coax, triax, twinax
contact to the shell. These connectors are sold “less contacts”. They
will accommodate size 8 coax, triax or twinax contacts or size 12 and
16 coax contacts.
The insert availability chart on pages 6 and 7 indicates the patterns
that are available in a ground plane version, (see those designated
with a star symbol), and consult how to order pages for ordering
procedures.
CONNECTORS WITH SHIELDED COAX CONTACTS
For shielded wire applications, coaxial contacts can be incorporated
into MIL-DTL-38999 connectors. Designed-in crimp or solder types
are available to fit various RG and special cables. High performance
coaxial contacts eliminate discontinuities or
impedance variations due to movement of
parts under axial load.
Concentric Twinax Contacts
Qualified to M39029/90 and /91
CONNECTORS WITH CONCENTRIC
TWINAX CONTACTS
The size 8 concentric twinax contact was
developed for use in MIL-STD-1553 Airborne
multiplex data bus applications which require
high performance interconnect characteristics
in multi-pin connectors. Ideal for this applica-
tion need is the high performance Tri-Start
connector with its fully scoop-proof feature of
recessed pins. The concentric twinax contact is
crimp terminable to twisted-shielded cable.
SHIELDED TRIAX CONTACTS
Triax contacts have three conductors and are
offered in sizes 8, 10 and 12. They provide
additional shielding when terminated to triax
cable having solid or stranded center conduc-
tors. Each of the three conductors of the triax
contact is separated by dielectric insulation to
isolate ground planes and to improve shielding
effectiveness.
High speed data transmission quadrax
contacts are now available for use in MIL-DTL-
38999 connectors.
PRESS FIT CONNECTORS
Tri-Start connectors are also designed for the
application of solderless mounting to printed
circuit boards. The Press Fit connector perfor-
mances are compatible with Series III
Ground Plane Connector with Twinax
Contacts and Insulated Power/Signal
Contacts
MIL-DTL-38999 Series III
Connectors with Compliant Pin
Contacts for Solderless Mount-
ing on Printed Circuit Boards
Consult the following Amphenol literature for further
information:
Product Data Sheet 139 for Ground Plane Connectors.
Product Data Sheet 188 for Press Fit Connectors.
Catalog 12-130 for High Frequency Contacts for Multi-
pin Connectors.
38999 Series III Connector
with Twinax Contacts and
Standard Contacts
Shielded Coax Contacts
50
Tri-Star t – specials
quadrax and differential twinax contacts
SIZE 8 HIGH SPEED QUADRAX AND DIFFERENTIAL TWINAX
CONTACTS FOR USE IN MIL-DTL-38999 CONNECTORS
Quadrax Contacts consist of an outer contact with four strategically
spaced inner contacts forming two 100 or 150 Ohm matched impedance
differential pairs.
Differential Twinax Contacts consist of an outer contact with two inner
contacts spaced to form one 100 or 150 Ohm matched impedance
differential pair.
Both contacts can be used in connectors for Ethernet 100 Base-T-100
Ohm, Fibre-Channel-150 Ohm and IEEE 1394B FireWire-110 Ohm
applications.
TYPICAL ELECTRICAL PERFORMANCE
• Bandwidth: Up to 3 Gigahertz
• Data rate: Exceeding 2 Gbits/sec.
• Voltage rating: 500 Vrms max. @ sea level
• Dielectric withstanding voltage:
1000 VACrms between all inner contacts @ sea level
500 VACrms between inner and outer contacts @ sea level
Quadrax contacts are also available in ARINC 600 Rectangular connectors. See photo
on right; consult Amphenol Aerospace for further information.
Also available are Quadrax and Twinax Transition Adapters which provide a method of
launching from the high speed connectors to PCB boards.
Consult Amphenol Aerospace, Sidney NY for ordering information for MIL-DTL-38999
Series III connectors with quadrax and differential twinax contacts. Below is a chart
that provides contact part numbers available, but not limited to, the cables listed. All
contacts are available kitted with or installed into specially modified MIL-DTL-38999
connectors. Consult Amphenol for cables not listed.
D38999 Series III Groundplane Connector with
Quadrax PCB Sockets Installed
Contacts front are Differential Twinax (left) and
Quadrax (right)
CONTACT PART NUMBERS AND APPLICABLE CABLES
FOR USE IN D38999 CONNECTORS
Description Part Number Cable Part Number Impedance
Quadrax Socket 21-33385-21 Draka Fileca F-4703-3 100 Ohm
21-33385-31 Tensolite 26473/02006X-4(LD) 150 Ohm
21-33385-51 Tensolite NF24Q100 100 Ohm
21-33385-61 Tensolite NF22Q100 or Thermax 956-5 100 Ohm
21-33385-61 Tensolite 24450/03089X-4(LD) 110 Ohm
21-33385-71 Tensolite NF26Q100 100 Ohm
21-33385-91 JSFY02 110 Ohm
21-33397-21 PCB (1.035 length) 100 Ohm
21-33397-31 PCB (.866 length 100 Ohm
Quadrax Pin 21-33384-21 Draka Fileca F-4703-3 100 Ohm
21-33384-31 Tensolite 26473/02006X-4(LD) 150 Ohm
21-33384-51 Tensolite NF24Q100 100 Ohm
21-33384-61 Tensolite NF22Q100 or Thermax 956-5 100 Ohm
21-33384-61 Tensolite 24450/03089X-4(LD) 110 Ohm
21-33384-71 Tensolite NF26Q100 100 Ohm
21-33384-91 JSFY02 110 Ohm
21-33398-21 PCB (1.035 length) 100 Ohm
21-33398-31 PCB (.866 length) 100 Ohm
21-33425-1 Right Angle Special 100 Ohm
Differential Twinax Socket 21-33388-21 Tensolite 24463/9P025X-2(LD) 100 Ohm
21-33388-31 Tensolite 26483/03071X-2(LD) 100 Ohm
21-33835-1 PCB (1.035 length)
Differential Twinax Pin 21-33387-21 Tensolite 24463/9P025X-2(LD) 100 Ohm
21-33387-31 Tensolite 26483/03071X-2(LD) 100 Ohm
21-33834-1 PCB (1.035 length)
Quadrax Contact for use in
ARINC 600 Connectors
51
Tri-Star t – specials
deep reach and stand-off shells, connectors with
integral strain reliefs, ESD protection, RJ Field
OTHER SPECIALS WITHIN THE
TRI-START FAMILY OF CONNECTORS:
•Deep Reach Shells – for increased panel
thicknesses.
•Stand-off Flange Shells – for attachment to
printed circuit boards
•Connectors with Integral Strain Reliefs –
cost savings through integration of strain relef
to the shell.
• Electrostatic Discharge (ESD) Protection –
Amphenol has developed a design feature for
the Tri-Start connector which will protect
sensitive components from Electrostatic
Discharge without diodes, varistors, gas
tubes, or “experimental” semiconductive
materials. These connectors utilize the
Faraday Cage principal to shunt electrostatic
discharge events to the conductive enclosure
on which the connector is mounted, thus
never allowing the high voltage, high current
discharge event to reside on any contacts.
The ESD protected connectors have the same
physical envelope as their standard counter-
parts, and do not require special mounting or
terminating techniques. All of the contacts
remain fully functional, and electrical charac-
teristics such as capacitance are not effected.
For more information on ESD protected
connectors, ask for Product Data Sheet 171.
Also publication L-2075, “ESD Attenuation
Test Procedure for Connectors with Faraday
Cage Protective Structures” is available as a
reference document.
Tri-Start Jam Nut Receptacle
with Deep Reach Shell
Tri-Start with Stand-off Flange
Tri-Start with Integral Strain Relief
Electrostatic Discharge (ESD) Testing
on Tri-Start Filter Connector
RJ FIELD CONNECTORS
Amphenol Socapex offers the RJF TV within the
MIL-DTL-38999 connector shell for Ethernet
connection. The RJ Field is designed for use
where it is necessary to go beyond the pro-
tected office environment of most Ethernet
applications, to the harsher environments of
industrial and even mil-aero applications. Allows
use of Ethernet Class D/Cat. 5e connection for
10 BaseT, 100 BaseTX, or 1000 Base T
networks.
Consult Amphenol Socapex for further informa-
tion. RJF TV Connectors for Ethernet Connection
52
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone: 607-563-5011
1-800-678-0141
Fax: 607-563-5157
www.amphenol-aerospace.com
www.amphenol-industrial.com
SALES OFFICES
Amphenol Corporation
Amphenol Aerospace
23276 South Pointe Drive
Suite 113
Laguna Hills, CA 92653
Phone: 949-855-4454
1-800-678-0141
Fax: 949-855-9115
Amphenol Corporation
Amphenol Aerospace
2010 Corporate Ridge
McLean, VA 22101
Phone: 1-800-678-0141
Amphenol Pcd
2 Technology Drive
Peabody, MA 01960
Phone: 978-532-8800
Fax: 978-532-6800
Web: www.amphenolpcd.com
Amphenol Backplane Systems
18 Celina Avenue
Nashua, NH 03063
Phone: 888-318-3553
Fax: 603-883-0247
www.amphenol.abs.com
Amphenol Advance Circuit
Technology
118 Northeastern Boulevard
Nashua, NH 03062
Phone: 603-880-6000
Fax: 603-880-1785
Web: www.act.flexcircuit.com
Amphenol Canada
20 Melford Drive
Scarborough, ON M1B 2X6 Canada
Phone: 416-291-4401
Fax: 416-292-0647
Web: www.amphenolcanada.com
DISTRIBUTORS
Corporate Headquarters
ARROW ELECTRONICS
7459 S. Lima Street
Englewood, CO 80112-5816
Phone: 800-777-2776
Fax: 800-562-3542
Web: www.arrow.com
AVNET
2211 47th Street
Phoenix, AZ 85034
Phone: 800-332-8638
Web: www.avnet.com
PEI GENESIS
2180 Hornig Road
Philadelphia, PA 19116
Phone: 800-523-0727
Fax: 215-552-8022
Web: www.peigenesis.com
POWELL ELECTRONICS
200 Commodore Drive
Logan Township, NJ 08085
Phone: 800-235-7880
Fax: 215-937-4655
Web: www.powell.com
TTI INC.
2441 Northeast Pkwy.
Fort Worth, TX 76106
Phone: 800-225-5884
Fax: 817-740-9494
Web: www.ttiinc.com
SMALL DISADVANTAGED/
MINORITY DISTRIBUTORS
CHEROKEE NATION DISTRIBUTORS
Highway 51 West
P.O. Box 1130
Stilwell, OK 74960
Phone: 918-696-2777
Fax: 918-696-3129
Web: www.cnicnd.com
JRH ELECTRONICS INC.
2002 E. Lincoln Drive West
Route 73, P.O. Box 264
Marlton, NJ 08053
Phone: 800-467-9309
Fax: 609-988-8728
Web: www.jrhelec.com
INTERNATIONAL
Latin America
ARGENTINA
Amphenol Argentina
Avenida Callao 930
2nd floor Office B Plaza
C1023AAP Buenos Aires, Argentina
Phone: (54 11) 48 15 68 86
Fax: (54 11) 48 14 57 79
E-mail:vendas@amphenol.com.ar
BRAZIL
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo - SP, Brazil
Phone: (55-11) 3815.1003
Fax: (55-11) 3815.1629
E-mail: vendas@amphenol.com.br
MEXICO
Amphenol Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F., Mexico
Phone: (52-55) 5258.9984
Fax: (52-55) 5081.6890
E-mail: info@amphenolmexico.com
Europe
ENGLAND
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: (44-1-227) 773200
Fax: (44-1-227) 276571
E-mail: info@amphenol.co.uk
FRANCE
Amphenol Socapex
Promenade de l’Arve, BP29
Thyez 74311 948 Cedex, France
Phone: (33-4) 50892800
Fax: (33-4) 50961941
Web: www.amphenol-socapex.com
GERMANY
Amphenol-Tuchel Elect. GmbH
August-Haeusser Strasse 10
Postfach 1110
74001 Heilbronn, Germany
Phone: (49-7131) 929 0
Fax: (49-7131) 929 414
GERMANY
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
D-66740 Saarlouis, Germany
Phone: (49-6831) 9810-87
Fax: (49-6831) 9810-30
Web: www.amphenol-airlb.com
ITALY & REST OF EUROPE
Amphenol Italia S.p.A.
Via Barbaiana 5
20020 Lainate (Milano), Italy
Phone: 39-02-932541
Fax: 39-02-93254444
E-mail: info@amphenol-it.com
Middle East / Africa
ISRAEL
Bar-Tec Ltd.
3 Hagavish St., P.O.B. 279
Kfir-Barkan Bldg., East Industrial Zone
Kfar Sava 44102, Israel
Phone: (972-9) 764.4100
Fax: (972-9) 7674324
E-mail: www.bar-tec.com
SOUTH AFRICA
Amphenol South Africa
30 Impala Road
Chislehurston
Sandton, 2146, South Africa
Tel: (27-11) 783-9517
Fax: (27-11) 783-9519
E-mail: amphenol_africa@csi.com
TURKEY
Amphenol Turkiye
Ayazaga Mah. Meydan Sk. No. 28
Beybi Giz Plaza, Kat. 26 Maslak
34396 Istanabul
Phone: 90 (212) 335 25 01
Fax: 990 (212) 335 25 00
Asia / Pacific
AUSTRALIA
Amphenol Australia LTD
2 Fiveways Blvd.
Melbourne, Victoria 3173
Australia
Phone: 613 8796 8888
Fax: 613 8796 8801
E-mail: info@amphenol.com.au
RUSSIA
Amphenol Russia Office
8-2 Yaroslavskaja Str.
129164 Moscow, Russia
Phone: 7495 937 634
E-mail: russia@amphenol.com
CHINA
Amphenol Aerospace China Office
Phone: +607-563-4060
E-mail: ChinaSales@amphenol-
aao.com
INDIA
Amphenol Interconnect India Pvt,
Ltd.
105 Bhosari Industrial Area
Pune, 411 026, India
Phone: (91-20) 27120 481
Fax: (91-20) 27120 581
E-mail: sales@amphenol-in.com
JAPAN
Amphenol Japan Mil/Aero &
Industrial
471-1, Debra, Ritto-city
Shiga 520-3041, Japan
Phone: 81-77-553-8501
Fax: 81-77-551-2200
KOREA
Amphenol Aerospace Korea Office
Phone: +607-563-4061
E-mail: KoreaSales@amphenol-
aao.com
SOUTHEAST ASIA
Amphenol Aerospace South East
Asia Office
Phone: +607-563-4062
E-mail:
SouthEastAsiaSales@amphenol-
aao.com
TAIWAN
Amphenol Aerospace Taiwan Office
Phone: +607-563-4063
E-mail: TaiwanSales@amphenol-
aao.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein
are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our
products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety
measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
© 2006 Amphenol Corp. Printed in U.S.A. JCP 8/2006
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
D38999/26JC4SN 30-276-WEEASN 30-300-WFFAPA 30-276-WEECPN 30-276-WA35PC 10-565997-068 88-
568931-35S 30-276-WA98PN 30-276-WB35PN-LC 30-276-FB4SN 30-276-WG75PN 30-276-WD35PB 30-276-
WB35SN-LC 30-276-WH35SN 30-276-WA35SC 30-276-WE6PN 30-276-WF35PA 30-276-WD35PN 30-276-
WJ35PN 30-276-WC35SN 30-300-WFFASN 30-276-WG39PN 30-276-WA35SD 30-276-WD15SN 30-300-WFFAPN
88-593276-AAS 30-276-WG11PN 30-276-WA98SA 30-276-WC98SA 30-276-WJ35SC 91-644623-35P 30-276-
WEEAPN 30-276-WJ35PB 30-276-WA35PN 30-276-WC35PB 30-276-WA98PN-LC 30-276-FB35SA 30-276-
WA98SB 30-276-FA35SA 30-276-WA35PA 30-276-WJ4SN 30-276-WC35PA 30-276-WH35PN 30-276-WH35SA
30-300-WEECSN-LC 30-276-WJ35SA 30-276-WFFAPA 88-568937-35H 91-569765-06G 91-569765-06H 30-276-
WJ35SB 30-276-WB98SN-LC 30-276-FA35SB 30-276-WD19SN-LC 88-568939-35H 30-276-WA35SB 30-276-
WFFASA 30-276-WB2PN 91-644625-26P 91-644624-19P 30-276-WJ61PB 30-276-WE6SC 30-276-WE6PA 30-
276-WG16PN 30-276-WJ20PN 88-637115-35S 30-276-WJ35SD 30-276-WJ19SN 30-276-WE26SN 30-276-
WA98SN 88-559577-11S 30-276-WJ4PN 30-276-WH35PC 30-276-WG39SN 30-276-WE6SA 30-276-WJ43SA 30-
276-WF32SB 30-276-WD97PA 30-276-WE35PC 30-276-WC98PN 30-276-WA35SNH-LC 30-276-WD5SN-LC 30-
300-WEEASN-LC 30-276-WG11PB-LC 30-276-WD19PN 30-276-WB35PA 30-276-WE8SA 30-276-WJ35PN-LC 30-
276-WH35PE 30-276-WA35SE-LC 30-276-WF28PA 30-276-WEECSN 30-276-WC4SA 30-276-WD19SB 30-276-
WF11PN 30-276-WA98PA 30-300-WEEAPN 91-569785-08P 30-276-WD97SN-LC 30-276-WJ24SN
