ML71-8-200/25/102/115 - PEPPERL+FUCHS

Germany: +49 621 776-4411

Subject to modifications without notice

Pepperl+Fuchs Group

fa-info@pepperl-fuchs.comwww.pepperl-fuchs.com

USA: +1 330 486 0001

fa-info@us.pepperl-fuchs.com

Singapore: +65 6779 9091

fa-info@sg.pepperl-fuchs.com

Diffuse mode sensor

ML71-8-200/25/102/115

Release date: 2011-08-25 10:12 Date of issue: 2011-08-25 127479_eng.xml

Dimensions

Electrical connection

Indicators/operating means

103

7.8

13.8

14.2

7.6

ø3.2

Option:

+UB

0 V

n.c.

102

= Light on

= Dark on

1 Operating display green

2 Signal display yellow

3 TEACH-IN button

4 Emitter

5 Receiver

345

Model Number

ML71-8-200/25/102/115

Diffuse mode sensor

with 2 m fixed cable

Features

• Miniature design with front optical

face

• Automatic adjustment of sensitivity

via TEACH-IN

• Clearly visible function indicators

• Flashing power on LED in case of

short-circuit

• Not sensitive to ambient light

• Protected against mutual interference

(no crosstalk)

Product information

Small, robust, effective, and reliable - these

are the properties of the ML7 sensor series.

Due to their small size, number of versions,

and two different lens positions, they are par-

ticularly suited for installation in tight spaces.

The robust design and high quality of Pep-

perl+Fuchs mean they can also be used

under harsh environmental conditions. The

efficient technology, switching frequencies up

to 1000 Hz, high resistance to ambient light,

and 4-in-1 output make the series suitable

for non-contact object detection.

Germany: +49 621 776-4411

Subject to modifications without notice

Pepperl+Fuchs Group

fa-info@pepperl-fuchs.comwww.pepperl-fuchs.com

USA: +1 330 486 0001

fa-info@us.pepperl-fuchs.com

Singapore: +65 6779 9091

fa-info@sg.pepperl-fuchs.com

Diffuse mode sensor

ML71-8-200/25/102/115

Release date: 2011-08-25 10:12 Date of issue: 2011-08-25 127479_eng.xml

Technical data

General specifications

Detection range 20 ... 200 mm

Adjustment range 60 ... 200 mm

Reference target standard white, 100 mm x 100 mm

Light source LED

Light type modulated visible red light

Diameter of the light spot approx. 15 mm at a distance of 200 mm

Angle of divergence approx. 4.5 °

Ambient light limit 40000 Lux

Functional safety related parameters

MTTFd 1610 a

Mission Time (TM) 20 a

Diagnostic Coverage (DC) 0 %

Indicators/operating means

Operating display LED green, flashes in case of short-circuit

Function display LED yellow, lights up with receiver lit

Controls TEACH-IN key

Electrical specifications

Operating voltage UB10 ... 30 V DC , class 2

Ripple max. 10 %

No-load supply current I0< 20 mA

Output

Switching type light on

Signal output 1 NPN output, short-circuit protected, reverse polarity protec-

ted, open collector

Switching voltage max. 30 V DC

Switching current max. 100 mA

Voltage drop Ud≤ 1. 5 V D C

Switching frequency f 1000 Hz

Response time 0.5 ms

Ambient conditions

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)

Storage temperature -40 ... 75 °C (-40 ... 167 °F)

Mechanical specifications

Protection degree IP67 / IP69K

Connection 2 m fixed cable

Material

Housing PC (glass-fiber-reinforced Makrolon)

Optical face PMMA

Mass approx. 50 g

Compliance with standards and directi-

ves

Standard conformity

Product standard EN 60947-5-2:2007

IEC 60947-5-2:2007

Standards EN 50178, UL 508

Approvals and certificates

Protection class II, rated voltage ≤ 250 V AC with pollution degree 1-2 accor-

ding to IEC 60664-1

UL approval cULus

CCC approval Products with a maximum operating voltage of ≤36 V do not

bear a CCC marking because they do not require approval.

Suitable cable sockets can be found in the

Internet

Accessories

OMH-ML7-01

Mounting bracket

OMH-ML7-02

Mounting bracket

OMH-ML7-03

Fixing plate

Germany: +49 621 776-4411

Subject to modifications without notice

Pepperl+Fuchs Group

fa-info@pepperl-fuchs.comwww.pepperl-fuchs.com

USA: +1 330 486 0001

fa-info@us.pepperl-fuchs.com

Singapore: +65 6779 9091

fa-info@sg.pepperl-fuchs.com

Diffuse mode sensor

ML71-8-200/25/102/115

Release date: 2011-08-25 10:12 Date of issue: 2011-08-25 127479_eng.xml

Connect the sensor to operating voltage, the LED green lights up constantly. The sensor operates at max. sensitivity (delivery status) or with

the last teached values.

•Adjust the unit to the target.

• Press the TEACH-IN button - as an acknowledge the green LED will switch off shortly for one time.

• Press the TEACH-IN button until both LED's green and yellow are blinking in parallel (2Hz). Release the TEACH-IN button now.

• While the green and yellow LEDs are blinking alternating (2Hz) the unit is in the internal set up procedure.

•TEACH-IN successful: Both LEDs green and yellow are on. The unit is ready to use and in switching mode now.

•TEACH-IN not successful: Both LEDs are flashing alternating (4Hz) for approx. 5 seconds. Afterwards the sensor returns to max. sensitiv-

ity setting. Please retry the TEACH-IN procedure beginning by step 1.

Curves/Diagrams

ML7-8

ML71-8

Distance X [mm]

Offset Y [mm]

Characteristic response curve

white 90 %

grey 18 %

-5

-10

0 50 100 150 200

ML7(1)-8

Distance X [mm]

Stability control

Relative received light strength

white 90 %

grey 18 %

black 6 %

0 50 100 150 200 250 300 350

100

TEACH-IN