FUJITSU TAKAMISAWA COMPONENT CATALOG FOR BOARD-TO-CABLE CONNECTION 230R SERIES (CONFORMING TO IPI) m@ FEATURES * These half-pitch connectors conform to the Intelligent Peripheral Interface (IPI) recommended by ANSI. * 1.27 mm (0.050 in.) pitch contact arrangement enables high-density mounting. * Cables and connectors are assembled by discrete wire IDC. * Connectors on the cable side provide excellent EMI shielding/ESD protection with inner-metal and outer- plastic dual cover. * Tails are spaced in a four-row staggered arrangement (2.54 mm (0.100 in.) x 1.905 mm (0.075 in.)} for easy PG board design. @ SPECIFICATIONS @ MATERIALS Item Specifications Item Materials Operating temperature range 55C to +85C Insulator Polyester (UL94V-0) Current rating DCIA Conductor Copper alloy Voltage rating AC 240 V Plating Contact Gold plating Contact resistance 30 m& max. (DC 6 V, 0.1A) Terminal Palladium plating Insulation resistance 1000 M2 min. (DC 500 ) Dielectric withstand voltage AC 750 V for 1 minute AWG #28 and #80 stranded wires with ~0.65 to 0.88 mm (0.026 to 0.035 in.) insulation diameter. Applicable wire (standard) (The applicable wires depend on the number of contacts. See the descriptions of IDC plugs and EMl/ ESD resistant covers.) 230R Series (Conforming to IPI) RIGHT-ANGLE SOCKET WITH HEXAGONAL NUTS FOR BOARD LOCK m@ DIMENSIONS A End terminal (0.050) 0400 ooo00000000 2-No. 2-58UNG Spacer Spacer ig | | Ag WS i = = de as HPP PEPE E 37 5 (0. 0.4000 2.88 (0 Thickness of board: t=1.8 mm (0.063 in} 3.40 ( When mounting a connector on a panel, remove the hexagonal nuts and spacers. After mounting on the panel, replace and tighten the hexagonal nuts. Unit: mm {in.} M@ MOUNTING HOLE LAYOUT (COMPONENT SIDE) 50 contacts 100 contacts x 40.1 [eoody ba z Bao fond) 5 = cmt ewe 3) 8 S=reme 5, fi End terminal 5 S qppu0a End terminal &| 8 J 2... J. e| a CO sos) __ | I. Ee] Lat VE er Fae Fro erteE 4h coe > oa ee L~ = : a No. 3 w ee No. 2 oe 32 No.1 3 Unit: mm {in.) @ PATTERN INHIBITED AREAS m@ RECOMMENDED PANEL DIMENSIONS S oe... _ (8-37) t p14ejersy oy J | oe o fs & : : +5- aR Ws H | to Ban (2004) Unit: mm (in.} Unit: mm (in.) Thickness of recommended panel: t = 1.5 mm (0.059 in.} m@ PART NUMBERS AND DIMENSIONS Part number contacts This series includes connectors with No.4-40UNC screws for hexagonal nuts. Specify a part number by replacing #BA at the end with #AA. Example: FCN-235D100-G/P#AA 230R Series (Conforming to IPI) Fujitsu Takamisawa International Headquarter Offices www fujitsu.takamisawa.com Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021