S134D-5 - Teledyne Technologies

Series S134

DPDT Non-Latching

Commercial Electromechanical Relay

S134\082018\Q3

SERIES RELAY TYPE

S134 DPDT basic relay

S134D DPDT relay with internal diode for coil transient suppression

S134DD DPDT relay with internal diodes for coil transient suppression and polarity reversal protection

DESCRIPTION

The Series S134 Surface Mount Centigrid® Relay is an ultraminiature,

hermet ically s ealed, armatu re relay. T he low p rofile height (.360”) and .100 ”

lead spacing make it ideal for applications where extreme packaging density

and/or close PC board spacing are required. The specially formed leads are

pre -t inne d to make t he rel ays idea l for mo st ty pes of s ur fac e mount s old er

reflow processes.

The basic design and internal construction are identical to the Series

134 Centigrid® relays, and are capable of meeting Teledyne Relays’

T2R® requirements. The following unique construction features and

manufacturing techniques provide overall high reliability and excellent

resistance to environmental ex tremes:

The S134 f ea t ur e:

• Al l wel de d c ons tr u ct i on.

• Hig h fo rc e /mas s ra ti os f or r esi st an c e to sh oc k an d vi br ati on.

• Unique uni-frame design providing high magnetic eff iciency and

mechanical rigidit y.

• Advanced cleaning techniques provide maximum assurance of

internal cleanliness.

• Prec i ou s met al a ll oy c ont a ct m ate r ial w it h g ol d pl ati ng as s ure s exce ll ent

hig h cu r re nt and d ry c ir c uit s wi tc hin g c ap ab ili t ie s.

The Series S134D and S134DD relays have internal discrete silicon

diodes for coil suppression and polarity reversal protection.

The s en sit ive s urfac e m ount C e nti gr i d ® r el ay has a hi gh r es is ta nc e

co il, t hus r eq uir i ng ex tr em el y low o p erat in g po wer (20 0 m w t yp ic a l). The

advant ag es of r ed uc e d heat d is si pat io n and p owe r sup ply d em and s ar e

a plus

INTERNAL CONSTRUCTION

CENTIGRID®

SURFACE MOUNT

COMMERCIAL RELAYS

SENSITIVE DPDT

Part Numbering System

S134 - 26 / R

Relay Series

Q = Solder-Coated Leads1

(Surface Mount Relays are

Solder-Coated by default)

R = RoHS Compliant Solder2

Nominal Coil Voltage

(26 = 26.5 V,

See Page 2 for more Voltages)

ENVIRONMENTAL AND

PHYSICAL SPECIFICATIONS

Temperature

(Operating) –55°C to +85°C

Vibration

(General Note I) 30 g’s to 3000 Hz

Shock

(General Note I)

50 g’s,

6ms half sine

Acceleration 50 g’s

Enclosure Hermetically sealed

Weight 0.15 oz. (4.3g) max.

Reflow Temperature 260°C max. temp.

1 min. max

UPPER

STATIONARY

CONTACT

LOWER

STATIONARY

CONTACT MOVING

CONTACT

UNI-FRAME

ARMATURE

Series S134

DPDT Non-Latching

Commercial Electromechanical Relay

S134\082018\Q3

SERIES S134

GE NE RAL E LECT RI CAL SPECI FI CATI O NS (- 5 5 °C t o 8 5 °C un l es s o th e rw i se n ot e d. S e e n ot e s 2 & 3.)

Contact Arrangement 2 Form C (DPDT)

Rated Duty Continuous

Contact Resistance 0.10 Ω max.

Contact Load Rating (DC)

Resistive: 1 A/ 28 Vdc

Inductive: 200 mA/ 28 Vdc (320mH)

Lamp: 100 mA / 28 Vdc (320mH)

Low level: 10 to 50 μA @ 10 to 50 mV

Contact Load Rating (AC) Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded)

100 mA / 115 Vac, 60 and 400 Hz (Case grounded)

Contact Life Ratings 10,000,000 cycles (typical) at low level

1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive

100,000 cycles min. at all other loads speciﬁ ed above

Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.)

Coil Operating Power 200 mW typical at nominal rated voltage

Contact Carry Rating Contact Factory

Operate Time 4.0 msec max. at nominal rated coil voltage

Release Time S134: 1.5 ms max. S134D, S134DD: 4.0 ms max.

Contact Bounce 1.5 msec max.

Intercontact Capacitance 0.4 pf typical

Insulation Resistance 10,000 MΩ min. between mutually isolated terminals

Dielectric Strength 500 Vrms (60 Hz) @ atmospheric pressure

Negative Coil Transient (Vdc) 1.0 Vdc Max.

Diode P.I.V. (Vdc) 100 Vdc Min.

BASE PART NUMBERS

(S134, S134D, S134DD)

S134-5

S134D-5

S134DD-5

S134-6

S134D-6

S134DD-6

S134-9

S134D-9

S134DD-9

S134-12

S134D-12

S134DD-12

S134-18

S134D-18

S134DD-18

S134-26

S134D-26

S134DD-26

Coil Voltage Nom. 5.0 6.0 9.0 12.0 18.0 26.5

Max. 7.5 10.0 15.0 20.0 30.0 40.0

Coil Resistance

(Ohms ±10% @25°C) S134, S134D 100 200 400 800 1600 3200

S134DD 64 125 400 800 1600 3200

Coil Curent (S134DD)

(mAdc@25°C) (Note 5) Min. 56.8 36.3 18.1 12.5 9.6 7.2

Max. 78.1 48.9 23.6 16.0 12.2 9.0

Pick-up Voltage

(Vdc, Max) S134, S134D 3.5 4.5 6.8 9.0 13.5 18.0

S134DD 3.7 4.8 8.0 11.0 14.5 19.0

Drop-out Voltage

(Vdc)

S134,

S134D Min. 0.12 0.18 0.35 0.41 0.59 0.89

Max. 2.5 3.2 4.9 6.5 10.0 13.0

S134DD Min. 0.7 0.8 0.9 1.0 1.1 1.3

Max. 2.6 3.0 4.5 5.8 9.0 13.0

DETAILED ELECTRICAL SPECIFICATIONS (-55 °C to 85 °C unless otherwise noted. See note 3.)

Series S134

DPDT Non-Latching

Commercial Electromechanical Relay

S134\082018\Q3

TYPICAL DC CONTACT RATING (RESISTIVE)

LOAD VOLTAGE (VDC)

.01 0.5 .1 .5 1.0

FREQUENCY (GHz)

FIGURE 1

TYPICAL RF PERFORMANCE

1.92

1.22

1.07

1.02

1.01

1.00

VSWR

RETURN LOSS (VSWR)

ISOLATION ACROSS CONTACTS

ISOLATION ACROSS POLES

300

250

200

150

100

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

LOAD CURRENT (AMPS DC)

FIGURE 2

INSERTION LOSS

GENERAL NOTES

1. Relay contacts will exhibit no chatter in

excess of 10 μsec or transfer in excess

of 1 μsec.

2. “Typical” characteristics are based on

available data and are best estimates.

No on-going verification tests are

performed.

3. Unless otherwise specified, parameters

are initial values.

4. Relays can be supplied with a spacer

pad. See appendix.

PERFORMANCE CURVES (Note 2)

SERIES S134

OUTLINE DI MENSI ONS

SCHEMATIC DIAGRAMS

S134 S134D S134DD

(Viewed From Terminals)

.335 MAX

(8.51)

.375 MAX

(9.53) .460 MAX

(11.68)

Ø.017 REF

(.43) 2° ±2° TYP

.378 +.030

–.020 TYP

9.60 +.76

–.51

()

.031 REF (.79)

4° MAX TYP

.035 REF

(.89)

.045 MIN 8 PL

(1.14)

.100 4 PL

(2.54)

.200

(5.08)

.100 TYP (2.54)

.200

(5.08)

(Note 6)

.375 SQ MAX

(9.53)

.200

(5.08)

.410 MIN

(10.41)

NOTES:

1. RELAY CONTACTS WILL EXHIBIT NO CHATTER IN EXCESS OF 10 MSEC OR TRANSFER IN EXCESS OF 1 MSEC.

2. “TYPICAL” CHARACTERISTICS ARE BASED ON AVAILABLE DATA AND ARE BEST ESTIMATES. NO ON-GOING VERIFICATION TESTS ARE PERFORMED.

3. UNLESS OTHERWISE SPECIFIED, PARAMETERS ARE INITIAL VALUES.

4. FOR REFERENCE ONLY. COIL RESISTANCE NOT DIRECTLY MEASURABLE AT RELAY TERMINALS DUE TO INTERNAL SERIES DIODE.

5. MEASURED AT NOMINAL VOLTAGE FOR 5 SEC. MAX.

6. POSITION OF LEADS AS THEY EMERGE FROM RELAY BASE.

7. LEADS WILL FIT NOTED PAD LAYOUT WITH NO OVERHANG.

8. LEAD ENDS ARE COPLANAR WITHIN .008” WIDE TOLERANCE ZONE.

9. TERMINALS COATED WITH SN60 OR SN63 SOLDER PER QQ-S-571. KOVAR EXPOSED AT SHEARED END OF LEADS.

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M4” Pad for TO-5

ER412, ER412D, ER412DD .295 (7.49)

712, 712D, 712TN,

RF300, RF310, RF320

RF700, RF703

.300 (7.62)

ER420, ER420D, ER420DD, 421,

ER421D, ER421DD, ER422, ER422D,

ER422DD, 722, 722D, RF341

.305 (7.75)

ER431T, ER432T,

ER432, ER432D, ER432DD .400 (10.16)

732, 732D, 732TN, RF303, RF313,

RF323 .410 (10.41)

RF312, RF332

SI800, SI803 .350 (8.89)

“M4” Pad for TO-5

ER411, ER411D, ER411DD, ER411T .295 (7.49)

ER431, ER431D, ER431DD .400 (10.16)

RF311 .300 (7.62)

RF331 .410 (10.41)

“M4” Pad for Centigrid®

172, 172D .305 (7.75)

ER114, ER114D, ER114DD,

J114, J114D, J114DD .300 (7.62)

ER134, ER134D, ER134DD,

J134, J134D, J134DD .400 (10.16)

RF100 .315 (8.00)

RF103 .420 (10.67)

“M9” Pad for Centigrid®

122C, A152 .320 (8.13)

ER116C, J116C .300 (7.62)

ER136C, J136C .400 (10.16)

RF180 .325 (8.25)

A150 .305 (7.75)

Notes:

1. Spacer pad material: Polyester ﬁ lm.

2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering

example in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speciﬁ ed, tolerance is ± .010” (.25 mm).

5. Add 10 mΩ to the contact resistance shown in the datasheet.

6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

Ø.150

[3.81]

(REF)

Dim H

MAX

Dim H

MAX

Dim H

MAX

.156

[3.96]

(REF)

.256

[6.5]

(REF)

Dim H

MAX

APPENDIX: Spacer Pads

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M” Pad 5/ 6/

ER411T, J411T, ER412, ER412D

ER412DD, J412, J412D, J412DD

ER412T, J412T

.388 (9.86)

712, 712D, 712TN .393 (9.99)

ER431T, J431T, ER432, ER432D

ER432DD, J432, J432D, J432DD

ER432T, J432T

.493 (12.52)

732, 732D, 732TN .503 (12.78)

ER420, J420, ER420D, J420D

ER420DD, J420DD, ER421, J421

ER421D, J421D, ER421DD

J422D, ER422DD, J422DD, 722

.398 (10.11)

“M2” Pad 7/ 8/

ER411T

ER412, ER412D, ER412DD

J412, J412D, J412DD .441 (11.20)

712, 712D .451 (11.46)

ER421, ER421D, ER421DD

722, 732D .451 (11.46)

ER431T

ER432, ER432D, ER432DD .546 (13.87)

732, 732D .556 (14.12)

“M3” Pad 5/ 6/ 9/

ER411, ER411D, ER411DD, ER411TX

ER412X, ER412DX, ER412DDX

ER412TX

.388 (9.86)

712X, 712DX, 712TNX .393 (9.99)

ER420X, ER420DX, ER420DDX

ER421X, ER421DX, ER421DDX

ER422X, ER422DX

ER422DDX, 722X, 722DDX

.398 (10.11)

ER431, ER431D, ER431DD

ER431TX

ER432X, ER432DX, ER432DDX

ER432TX

.493 (12.52)

732X, 732DX, 732TNX .503 (12.78)

Notes:

1. Spreader pad material: Diallyl Phthalate.

2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example

in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speciﬁ ed, tolerance is ± .010” (0.25 mm).

5/. Add 25 mΩ to the contact resistance shown in the datasheet.

6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

7/. Add 50 mΩ to the contact resistance shown in the datasheet.

8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.

9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

.390 [9.91]

.300

[7.62]

.100

[2.54]

.300

[7.62]

.100

[2.54] .150

[3.81]

.150

[3.81]

.130

[3.3]

Dim H

MAX

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

APPENDIX: Spreader Pads

.100

[2.54]

.100

[2.54]

.100

[2.54]

"Y" POSITION

"Z" POSITION

.100

[2.54]

.100

[2.54]

.100

[2.54]

"W" POSITION

"U" POSITION

(ER116C and ER136C only)

"X" POSITION

"Z" POSITION

"Y" POSITION

.050

[1.27]

36°±3°

Ø.200

[Ø5.08]

"Z" POSITION

"Y" POSITION

"X" POSITION

45°±3°

"Z" POSITION

"Y" POSITION

Ø.200

[Ø5.08]

Centigrid® Relays:

RF100, RF103, ER114, ER134, 172

Centigrid® Relays:

RF180, ER116C, 122C, ER136C

TO-5 Relays:

ER411T, ER412, ER412T, ER420, ER421, ER422,

ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,

400V, RF300, RF303, RF341, RF312, RF332, RF310,

RF313, RF320, RF323, SI800, SI803, RF700, RF703

TO-5 Relays:

ER411, ER431, RF311, RF331

NOTES

1. Terminal views shown

2. Dimensions are in inches (mm)

3. Tolerances: ± .010 (±.25) unless otherwise speciﬁ ed

4. Ground pin positions are within .015 (0.38) dia. of true position

5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.

6. Lead dia. 0.017 (0.43) nom.

Indicates ground pin position

Indicates glass insulated lead position

Indicates ground pin or lead position

depending on relay type

APPENDIX: Ground Pin Positions

Loopback Relays:

LB363

“Z” Position

“Y” Position