Series S134 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID(R) SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES RELAY TYPE S134 DPDT basic relay S134D DPDT relay with internal diode for coil transient suppression S134DD DPDT relay with internal diodes for coil transient suppression and polarity reversal protection DESCRIPTION The Series S134 Surface Mount Centigrid(R) Relay is an ultraminiature, hermetically sealed, armature relay. The low profile height (.360") and .100" lead spacing make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for most types of surface mount solder reflow processes. * Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. * Advanced cleaning techniques provide maximum assurance of internal cleanliness. * Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. The basic design and internal construction are identical to the Series 134 Centigrid(R) relays, and are capable of meeting Teledyne Relays' T2R(R) requirements. The following unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: The Series S134D and S134DD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The S134 feature: The sensitive surface mount Centigrid(R) relay has a high resistance coil, thus requiring extremely low operating power (200 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus * All welded construction. * High force/mass ratios for resistance to shock and vibration. Part Numbering System S134 - 26 / R Q = Solder-Coated Leads1 (Surface Mount Relays are Solder-Coated by default) R = RoHS Compliant Solder2 Relay Series Nominal Coil Voltage (26 = 26.5 V, See Page 2 for more Voltages) ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Operating) -55C to +85C Vibration (General Note I) 30 g's to 3000 Hz Shock (General Note I) 50 g's, 6ms half sine Acceleration 50 g's Enclosure Hermetically sealed Weight 0.15 oz. (4.3g) max. Reflow Temperature 260C max. temp. 1 min. max (c) 2018 TELEDYNE RELAYS INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT UNI-FRAME ARMATURE LOWER STATIONARY CONTACT (800) 284-7007 * www.teledynerelays.com MOVING CONTACT S134 Page 1 S134\082018\Q3 Series S134 DPDT Non-Latching Commercial Electromechanical Relay SERIES S134 GENERAL ELECTRICAL SPECIFICATIONS (-55 C to 85 C unless otherwise noted. See notes 2 & 3.) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.10 max. Contact Load Rating (DC) Resistive: Inductive: Lamp: Low level: Contact Load Rating (AC) Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded) 100 mA / 115 Vac, 60 and 400 Hz (Case grounded) Contact Life Ratings 10,000,000 cycles (typical) at low level 1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Coil Operating Power 200 mW typical at nominal rated voltage Contact Carry Rating Contact Factory Operate Time 4.0 msec max. at nominal rated coil voltage Release Time S134: 1.5 ms max. Contact Bounce 1.5 msec max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 10,000 M min. between mutually isolated terminals Dielectric Strength 500 Vrms (60 Hz) @ atmospheric pressure Negative Coil Transient (Vdc) 1.0 Vdc Max. Diode P.I.V. (Vdc) 100 Vdc Min. 1 A/ 28 Vdc 200 mA/ 28 Vdc (320mH) 100 mA / 28 Vdc (320mH) 10 to 50 A @ 10 to 50 mV S134D, S134DD: 4.0 ms max. DETAILED ELECTRICAL SPECIFICATIONS (-55 C to 85 C unless otherwise noted. See note 3.) S134-5 S134D-5 S134DD-5 S134-6 S134D-6 S134DD-6 S134-9 S134D-9 S134DD-9 S134-12 S134D-12 S134DD-12 S134-18 S134D-18 S134DD-18 S134-26 S134D-26 S134DD-26 Nom. 5.0 6.0 9.0 12.0 18.0 26.5 Max. 7.5 10.0 15.0 20.0 30.0 40.0 S134, S134D 100 200 400 800 1600 3200 S134DD 64 125 400 800 1600 3200 Min. 56.8 36.3 18.1 12.5 9.6 7.2 Max. 78.1 48.9 23.6 16.0 12.2 9.0 3.5 4.5 6.8 9.0 13.5 18.0 BASE PART NUMBERS (S134, S134D, S134DD) Coil Voltage Coil Resistance (Ohms 10% @25C) Coil Curent (S134DD) (mAdc@25C) Pick-up Voltage (Vdc, Max) Drop-out Voltage (Vdc) (Note 5) S134, S134D S134, S134D S134DD S134 Page 2 3.7 4.8 8.0 11.0 14.5 19.0 Min. 0.12 0.18 0.35 0.41 0.59 0.89 Max. 2.5 3.2 4.9 6.5 10.0 13.0 Min. 0.7 0.8 0.9 1.0 1.1 1.3 Max. 2.6 3.0 4.5 5.8 9.0 13.0 S134DD SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (c) 2018 TELEDYNE RELAYS S134\082018\Q3 Series S134 DPDT Non-Latching Commercial Electromechanical Relay SERIES S134 OUTLINE DIMENSIONS .031 REF (.79) .035 REF (.89) .335 MAX (8.51) .100 4 PL (2.54) 4 MAX TYP 4 MAX TYP .045 MIN 8 PL (1.14) .460 MAX (11.68) .375 SQ MAX (9.53) .200 (5.08) .200 (5.08) +.030 .378 -.020 TYP 9.60 +.76 -.51 ( (Note 6) O.017 REF (.43) ) .200 (5.08) .410 MIN (10.41) .100 TYP (2.54) .375 MAX (9.53) 2 2 TYP (Viewed From Terminals) SCHEMATIC DIAGRAMS 7 6 5 1 8 2 4 8 7 6 3 5 S134 4 1 7 2 6 3 5 S134D 8 1 2 3 4 S134DD NOTES: 1. RELAY CONTACTS WILL EXHIBIT NO CHATTER IN EXCESS OF 10 MSEC OR TRANSFER IN EXCESS OF 1 MSEC. 2. "TYPICAL" CHARACTERISTICS ARE BASED ON AVAILABLE DATA AND ARE BEST ESTIMATES. NO ON-GOING VERIFICATION TESTS ARE PERFORMED. 3. UNLESS OTHERWISE SPECIFIED, PARAMETERS ARE INITIAL VALUES. 4. FOR REFERENCE ONLY. COIL RESISTANCE NOT DIRECTLY MEASURABLE AT RELAY TERMINALS DUE TO INTERNAL SERIES DIODE. 5. MEASURED AT NOMINAL VOLTAGE FOR 5 SEC. MAX. 6. POSITION OF LEADS AS THEY EMERGE FROM RELAY BASE. 7. LEADS WILL FIT NOTED PAD LAYOUT WITH NO OVERHANG. 8. LEAD ENDS ARE COPLANAR WITHIN .008" WIDE TOLERANCE ZONE. 9. TERMINALS COATED WITH SN60 OR SN63 SOLDER PER QQ-S-571. KOVAR EXPOSED AT SHEARED END OF LEADS. GENERAL NOTES 1. Relay contacts will exhibit no chatter in excess of 10 sec or transfer in excess of 1 sec. 2. "Typical" characteristics are based on available data and are best estimates. No on-going verification tests are performed. 3. Unless otherwise specified, parameters are initial values. 4. Relays can be supplied with a spacer pad. See appendix. PERFORMANCE CURVES (Note 2) TYPICAL DC CONTACT RATING (RESISTIVE) TYPICAL RF PERFORMANCE INSE 10 20 30 40 50 60 70 LOSS 1.92 S 1.22 RN LO RETU CTS A 1.07 T N S CO ROS 1.02 C A S POLE TION S A S L 1.01 ISO ACRO TION ISOLA 1.00 1.00 0.5 .1 .5 1.0 300 WR) S (VS .01 LOAD VOLTAGE (VDC) RTIO N VSWR dB 0 .1 .2 .3 .4 250 200 150 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) LOAD CURRENT (AMPS DC) FIGURE 1 FIGURE 2 (c) 2018 TELEDYNE RELAYS 0.8 0.9 (800) 284-7007 * www.teledynerelays.com 1.0 S134 Page 3 S134\082018\Q3 APPENDIX: Spacer Pads Pad designation and bottom view dimensions Height O.150 [3.81] (REF) Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for Centigrid(R) .156 [3.96] (REF) Dim H MAX .256 [6.5] (REF) "M9" Pad for Centigrid(R) For use with the following: Dim. H Max. ER412, ER412D, ER412DD .295 (7.49) 712, 712D, 712TN, RF300, RF310, RF320 RF700, RF703 .300 (7.62) ER420, ER420D, ER420DD, 421, ER421D, ER421DD, ER422, ER422D, ER422DD, 722, 722D, RF341 .305 (7.75) ER431T, ER432T, ER432, ER432D, ER432DD .400 (10.16) 732, 732D, 732TN, RF303, RF313, RF323 .410 (10.41) RF312, RF332 SI800, SI803 .350 (8.89) ER411, ER411D, ER411DD, ER411T .295 (7.49) ER431, ER431D, ER431DD .400 (10.16) RF311 .300 (7.62) RF331 .410 (10.41) 172, 172D .305 (7.75) ER114, ER114D, ER114DD, J114, J114D, J114DD .300 (7.62) ER134, ER134D, ER134DD, J134, J134D, J134DD .400 (10.16) RF100 .315 (8.00) RF103 .420 (10.67) 122C, A152 .320 (8.13) ER116C, J116C .300 (7.62) ER136C, J136C .400 (10.16) RF180 .325 (8.25) A150 .305 (7.75) Notes: 1. Spacer pad material: Polyester film. 2. To specify an "M4" or "M9" spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specified, tolerance is .010" (.25 mm). 5. Add 10 m to the contact resistance shown in the datasheet. 6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. Page 4 (800) 284-7007 * www.teledynerelays.com * +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2016 TELEDYNE RELAYS APPENDIX: Spreader Pads Pad designation and bottom view dimensions Height For use with the following: .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .300 [7.62] .150 [3.81] .014 [0.36] (REF) .100 [2.54] .370 [9.4] MIN .200 [5.08] "M" Pad 5/ 6/ .390 [9.91] SQ .100 [2.54] .150 [3.81] .300 [7.62] .300 [7.62] .150 [3.81] Dim H MAX .130 [3.3] "M2" Pad 7/ 8/ .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .300 [7.62] .150 [3.81] .014 [0.36] (REF) .100 [2.54] .200 [5.08] "M3" Pad 5/ 6/ 9/ ER411T, J411T, ER412, ER412D ER412DD, J412, J412D, J412DD ER412T, J412T .388 (9.86) 712, 712D, 712TN .393 (9.99) ER431T, J431T, ER432, ER432D ER432DD, J432, J432D, J432DD ER432T, J432T .493 (12.52) 732, 732D, 732TN .503 (12.78) ER420, J420, ER420D, J420D ER420DD, J420DD, ER421, J421 ER421D, J421D, ER421DD J422D, ER422DD, J422DD, 722 .398 (10.11) ER411T ER412, ER412D, ER412DD J412, J412D, J412DD .100 [2.54] .370 [9.4] MIN Dim. H Max. .441 (11.20) 712, 712D .451 (11.46) ER421, ER421D, ER421DD 722, 732D .451 (11.46) ER431T ER432, ER432D, ER432DD .546 (13.87) 732, 732D .556 (14.12) ER411, ER411D, ER411DD, ER411TX ER412X, ER412DX, ER412DDX ER412TX .388 (9.86) 712X, 712DX, 712TNX .393 (9.99) ER420X, ER420DX, ER420DDX ER421X, ER421DX, ER421DDX ER422X, ER422DX ER422DDX, 722X, 722DDX .398 (10.11) ER431, ER431D, ER431DD ER431TX ER432X, ER432DX, ER432DDX ER432TX .493 (12.52) 732X, 732DX, 732TNX .503 (12.78) Notes: 1. Spreader pad material: Diallyl Phthalate. 2. To specify an "M", "M2" or "M3" spreader pad, refer to the mounting variants portion of the part number example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specified, tolerance is .010" (0.25 mm). 5/. Add 25 m to the contact resistance shown in the datasheet. 6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. 7/. Add 50 m to the contact resistance shown in the datasheet. 8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet. 9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.) (c) 2016 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 5 APPENDIX: Ground Pin Positions O.200 [O5.08] 363 "Z" "Z" POSITION "X" POSITION "Y" POSITION O.200 [O5.08] "Y" 453 TO-5 Relays: TO-5 Relays: ER411T, ER412, ER412T, ER420, ER421, ER422, ER431T, ER432, ER432T, 712, 712TN, 400H, 400K, 400V, RF300, RF303, RF341, RF312, RF332, RF310, RF313, RF320, RF323, SI800, SI803, RF700, RF703 ER411, ER431, RF311, RF331 "Y" POSITION .100 [2.54] .050 [1.27] POSITION "Y" POSITION "Z" POSITION .100 [2.54] .100 [2.54] "W" POSITION POSITION "Z" POSITION "X" POSITION .100 [2.54] .100 [2.54] "U" POSITION (ER116C and ER136C only) .100 [2.54] Centigrid(R) Relays: Centigrid(R) Relays: RF100, RF103, ER114, ER134, 172 RF180, ER116C, 122C, ER136C "Z" Position Loopback Relays: LB363 "Y" Position Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type Page 6 NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: .010 (.25) unless otherwise specified 4. Ground pin positions are within .015 (0.38) dia. of true position 5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref. 6. Lead dia. 0.017 (0.43) nom. (800) 284-7007 * www.teledynerelays.com * +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2016 TELEDYNE RELAYS