PREMISE CABLES AFL has taken more than 15 years of fiber optic cabling experience and perfected their offering of tight-buffered fiber cables. AFL has cables to serve any application, in any environment. These products are easy to route, strip, and test. All premise cables contain 200/500MHz * km increased band width fiber which allows greater capacity and distance. Backbone cables from AFL are available in riser (UL 1666 - OFNR) fiber counts up to 144 and plenum (UL 910 - OFNP) fiber counts up to a convenient 72. AFL's vast array of fiber products will allow you to specify with confidence an entire fiber optic system. a Alcoa Fujikura Ltd. Telecommunications Division www.aflfiber.com 1-800-235-3423 Alcoa Fujikura Ltd. Telecommunications Division SIMPLEX CABLE AFLs Simplex fiber optic cables provide the strength and flexibility required for today's fiber networks. Specific applications include the following: Fiber patch panels within communications closets Communications closet to wall outlets Wall outlet to desk top (open office) Dropped ceiling (plenum) applications Connectorized patch cords for cross connect applications Simplex cable 60 FEATURES & BENEFITS Single-mode and multimode fiber available 900m buffer for secure and reliable connectorization with all types of fiber connectors (125/250/900m) Aramid yarn reinforcement for rugged protection Highly flexible for ease of routing OFNR-UL 1666 riser-rated, as well as Canadian UL and CSA FT-4 listed OFNP-UL 910 plenum-rated, as well as Canadian UL and CSA FT-6 listed Tested and designed in accordance to Bellcore GR-409-CORE, as well as EIA/TIA 568A Ease of stripping for field installable connectors or splicing Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A SIMPLEX CABLE Tight Buffered Fiber (900m Buffer) Aramid Yarn Outer Jacket ORDERING INFORMATION Item Number Fiber Count Configuration Single-Mode 50/125m SR0019201001 SR0015201001 SR0016201001 SR0019241001 SR0015241001 SR0016241001 SR0019301001 SR0015301001 SR0016301001 Plenum Simplex Cable Weight inches lbs/1,000ft (mm) (kg/km) 0.06 62.5/125m SR0019161001 SR0015161001 SR0016161001 Riser Simplex Cable Nominal Diameter SP0019301001 SP0015301001 SP0016301001 1 1 1 1 1 Tension Bending radius Newtons (lbs) inches (mm) Installation Long Term Installation Long Term 2 190 95 2.0 1.2 (2.0) (3) (43) (21) (50) (30) 0.08 3 190 95 2.0 1.2 (2.4) (4) (43) (21) (50) (30) 0.09 3 500 250 2.0 1.2 (3.0) (5) (112) (56) (50) (30) 0.11 5 500 250 2.0 1.2 (2.9) (7) (112) (56) (50) (30) 0.11 6 500 250 2.0 1.2 (2.9) (9) (112) (56) (50) (30) TEMPERATURE RANGE Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Single-Mode Multimode (50/125m) Multimode (62.5/125m) (1310nm/1550nm) (850nm/1300nm) (850nm/1300nm) Maximum Attenuation Loss 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 dB/km Typical Attenuation Loss 0.40/0.30 dB/km 3.0/1.0 dB/km 3.0/1.0 dB/km Bandwidth MHz/km --/-- 400/400 160/500 Riser Cable Plenum Cable OPTICAL SPECIFICATIONS CABLE LENGTH - REEL SIZE Item Reel A Reel B Reel Height (inches) 14.5 24.0 Reel Outside Width (inches) 16.0 18.0 Reel Weight (lbs) 6.0 20.0 Capacity: meters / (feet) Simplex 2.0 4,200 / (13,780) 4,200 / (13,780) Simplex 2.4 3,500 / (11,484) 5,000 / (16,405) Simplex 3.0 1,950 / (6,398) 5,000 / (16,405) Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 61 Alcoa Fujikura Ltd. Telecommunications Division LSZH ZIPCORD & DUAL-LINK CABLE AFL's Zipcord and DUAL-Link cables are available to provide links to the future for such protocols as FDDI, Gigabit Ethernet, ATM, and Fibre channel. Connections are easy to terminate with this flexible, two-fiber design. Specific applications include: Zipcord & LSZH Zipcord Fiber to the desk Multiple fiber patchcords for interconnect and cross connect Fibre Channel Easy interface to ESCON(R) and FDDI connectors Meets JIS Standard C5970 FEATURES & BENEFITS DUAL-Link Easy identification of individual fibers Single-mode and multimode fiber available 900m for secure and reliable buffer connectorization with all types of fiber connectors Aramid yarn reinforcement for rugged protection Highly flexible for ease of routing 2.8mm Micro DUAL-Link and 2.0mm Zipcord available for crowded routing environments OFNR-UL 1666 riser-rated, as well as Canadian UL and CSA FT-4 listed OFNP-UL 910 plenum-rated, as well as Canadian UL and CSA FT-6 listed Tested and designed in accordance to Bellcore GR-409-CORE Ease of stripping for field installable connectors or splicing NEW Low Smoke Zero Halogen Cable (LSZH) does not produce corrosive gases when burned. This is especially important when cables are in areas with expensive electronic equipment. This cable is also listed to the UL-1666 Riser rating, allowing it to be used inside a buildings riser shaft. The specialized jacketing material used in this construction is extremely flexible, and easy to handle in all situations. This design produces an extremely tough construction, which will maintain its performance in demanding environments. 62 Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A DUAL-LINK & ZIPCORD CABLE Tight Buffered Fiber (900m Buffer) Tight Buffered Fiber (900m Buffer) Aramid Yarns Aramid Yarns Outer Jacket Outer Jacket (LSZH Zipcord Outer Jacket) DUAL-Link Zipcord & LSZH Zipcord MECHANICAL SPECIFICATIONS Item Number Riser Zipcord Plenum Zipcord Riser LSZH Zipcord Riser DUAL-Link Plenum DUAL-Link Fiber Count Single-Mode 50/125m 62.5/125m ZR0029301001 ZR0025301001 ZR0026301001 2 ZR0029241001 ZR0025241001 ZR0026241001 2 ZR0029201001 ZR0025201001 ZR0026201001 2 ZP0029301001 ZP0025301001 ZP0026301001 2 ZE0029301001 ZE0025301001 ZE0026301001 2 DR0029281001 DR0025281001 DR0026281001 2 DR0029481001 DR0025481001 DR0026481001 2 DP0029481001 DP0025481001 DP0026481001 2 Nominal Diameter Weight inches lbs/1,000ft (mm) (kg/km) 0.22x0.29 10 (2.90X6.0) (15) .09X.19 10 (2.4X4.8) (15) .08X.16 10 (2.0X4.0) (15) .12X.24 11 (2.90X6.0) (17.8) .12X.24 10 (2.9x6.0) (15) 0.11 (2.80) 0.19 (4.80) 0.19 (4,80) 5 (7) 13 (20) 17 (25) Tension Newtons (lbs) Bending Radius inches (mm) Installation Long Term Installation Long Term 1,000 500 2.0 1.2 1,000 500 2.0 1.2 1,000 500 2.0 1.2 1,000 500 2.0 1.2 1,000 500 2.0 1.2 500 250 3.1 2.0 1,000 500 3.1 2.0 1,000 500 3.1 2.0 TEMPERATURE RANGE Riser Cable Plenum Cable Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Single-Mode (1310nm/1550nm) 0.50/0.50 dB/km 0.40/0.30 dB/km --/-- Multimode (50/125m) (850nm/1300nm) 3.5/2.0 dB/km 3.0/1.0 dB/km 400/400 Multimode (62.5/125m) (850nm/1300nm) 3.5/1.2 dB/km 3.0/1.0 dB/km 160/500 OPTICAL SPECIFICATIONS Maximum Attenuation Loss Typical Attenuation Loss Bandwidth MHz/km CABLE LENGTH - REEL SIZE Item Reel A Reel B Reel Height (inches) 14.5 24.0 Reel Outside Width (inches) 16.0 18.0 Reel Weight (lbs) 6.0 20.0 Capacity: meters / (feet) Zipcord 2.0mm 2,100 / (6,890) 2,100 / (6,890) Zipcord 2.4mm 1,750 / (5,742) 2,500 / (8,203) Zipcord 3.0mm 970 / (3,183) 2,500 / (8,203) DUAL-Link 2.8mm 2,200 / (7,218) 2,200 / (7,218) DUAL-Link 4.8mm 750 / (2,461) 2,500 / (8,203) Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 63 Alcoa Fujikura Ltd. Telecommunications Division QUAD-LINK & CIRCULAR PREMISE CABLE (up to 12 fibers in a single unit) Alcoa Fujikura Ltd.'s QUAD-Link and single unit Circular Premise Cables allow for packaging density and ease of routing for high fiber count applications. Buffered to 900m, these cables can be directly terminated to todays connectors in loaded panels, or in communications closets. Specific applications include: QUAD-Link Connectorized communications cables with sendand-receive and send-and-receive backup Intrabuilding backbones Routing between communications closets and equipment rooms FEATURES & BENEFITS Circular Premise Cable 64 200/500 MHz km (increased bandwidth) for higher data rates Single-mode and multimode fiber available 900m buffer for secure and reliable connectorization with all types of fiber connectors (125/250/900m) Aramid yarn reinforcement for rugged protection Highly flexible for ease of routing OFNR-UL 1666 riser-rated, as well as Canadian UL and CSA FT-4 listed OFNP-UL 910 plenum-rated, as well as Canadian UL and CSA FT-6 listed Tested and designed in accordance to Bellcore GR-409-CORE Ease of stripping for field installable connectors or splicing Easily identifiable color coded tight-buffered fibers Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A QUAD-LINK & CIRCULAR PREMISE CABLE Tight Buffered Fiber Tight Buffered Fiber Aramid Yarns Aramid Yarns Ripcord Outer Jacket Outer Jacket MECHANICAL SPECIFICATIONS Item Number QUAD-Link Riser QUAD-Link Plenum Single-Mode 50/125m 62.5/125m UR0049481001 UR0045481001 UR0046481001 UP0049481001 CR0069441001 Riser CPC Plenum CPC Fiber Count UP0045481001 CR0065441001 UP0046481001 CR0066441001 4 4 6 CR0089471001 CR0085471001 CR0086471001 8 CR0129551001 CR0125551001 CR0126551001 12 CP0069441001 CP0065441001 CP0066441001 6 CP0089471001 CP0085471001 CP0086471001 8 CP0129551001 CP0125551001 CP0126551001 12 Nominal Diameter Weight inches lbs/1,000ft (mm) (kg/km) Tension Bending Radius Newtons (lbs) inches (mm) Long Term Installation Installation Long Term 0.19 17 1,400 700 3.1 2.0 (4.80) (25) (315) (157) (80) (50) 0.19 20 1,400 700 3.1 2.0 (4.90) (30) (315) (157) (80) (50) 0.17 13 750 375 3.1 2.0 (4.40) (20) (169) (84) (80) (50) 0.19 13 750 375 3.1 2.0 (4.70) (20) (169) (84) (80) (50) 0.22 17 1,000 500 3.5 2.4 (5.5) (25) (225) (112) (90) (60) 0.17 13 750 375 3.1 2.0 (4.40) (20) (169) (84) (80) (50) 0.19 17 750 375 3.1 2.0 (4.70) (25) (169) (84) (80) (50) 0.22 20 1,000 500 3.5 2.4 (5.50) (30) (225) (112) (90) (60) TEMPERATURE RANGE (-40C (-20C (-40C (-20C to to to to +70C) +70C) Riser Cable +70C) +70C) Plenum Cable Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Multimode (50/125m) Multimode (62.5/125m) (850nm/1300nm) (850nm/1300nm) 3.5/2.0 dB/km 3.5/1.2 dB/km OPTICAL SPECIFICATIONS Single-Mode Multimode ( 50/125 m) Multimode ( 62.5/125 m ) Single-Mode ( 1310 nm/1550 nm ) ( 850 nm/1300 nm ) ( 850 nm/1300 nm ) 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 (1310nm/1550nm) dB/km 0.40/0.30 dB/kmAttenuation 3.0/1.0 dB/km 3.0/1.0 dB/km Maximum Loss 0.50/0.50 dB/km --/-- 400/400 200/500 Typical Attenuation Loss 0.40/0.30 dB/km Bandwidth MHz/km 3.0/1.0 dB/km 3.0/1.0 dB/km --/-- 400/400 200/500 Reel A Reel B Reel C CABLE LENGTH - REEL SIZE Item Reel AItemReel B Reel C Reel Height: inch 14.5 24.0 Reel Width: Height inch (inches) 16.0 Reel Outside Reel Reel Weight: lbs. Width 6.0 (inches) 20.0 Outside Capacity: meters (feet) Reel Weight (lbs) 6 Fiber CPC 450 (1,476) 8 Fiber CPC 375 (1,230) 12 Fiber CPC6 Fiber 250 (820) CPC 24.0 18.0 20.0 1,500 1,250 1,000 18.016.0 15.25 24.0 30.0 18.25 15.25 8.0 24.0 (4,922) 3000 (9843) Capacity: meters / (feet) (4,101) 3000 (9843) (3,281) 3000 (9843) 1,000 / (3,281) 2,100 / (6,890) 32.0 5,000 / (16,405) 8 Fiber CPC 880 / (2,890) 1,800 / (5,900) 4,350 / (14,270) 12 Fiber CPC 640 / (2,100) 1,300 / (4,265) 3,200 / (10,500) Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 65 Alcoa Fujikura Ltd. Telecommunications Division MULTI-UNIT CIRCULAR PREMISE CABLE AFLs Multi-Unit Circular Premise Cables allow for use in applications requiring fiber counts between 24 and 144 fibers. Unitized construction allows for ease of fiber identification and rapid installation. Specific applications include: Head-end termination to a fiber backbone Termination of fiber rack systems Multi-floor deployment where select fibers are used at each floor Intrabuilding backbones Circular Premise Cable Fiber subunits 900m Buffer Aramid Yarns PVC Jacket Ripcord Central Member Ripcord Binder Outer Jacket Fiber Unit 900m Buffer Aramid Yarns PVC Jacket Ripcord Central Member Ripcord Binder Outer Jacket 66 FEATURES & BENEFITS 200/500 MHz km (increased bandwidth) for higher data rates Single-mode & multimode fiber available, as well as hybrid cables with multiple fiber types 900m buffer for secure and reliable connectorization with all types of fiber connectors (125/250/900m) Aramid yarn reinforcement for rugged protection Highly flexible for ease of routing OFNR-UL 1666 riser-rated, as well as Canadian UL and CSA FT-4 listed OFNP-UL 910 plenum-rated, as well as Canadian UL and CSA FT-6 listed Tested and designed in accordance to Bellcore GR-409-CORE Ease of stripping for field installable connectors or splicing Easily identifiable colored fibers and unitized subgroups Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A MECHANICAL SPECIFICATIONS Item Number Configuration Multi-unit CPC Riser Multi-unit CPC Plenum Fiber Count Single-Mode CR0249441001 50/125m CR0245441001 62.5/125m CR0246441001 24 CR0369441001 CR0365441001 CR0366441001 36 CR0489551001 CR0485551001 CR0486551001 48 CR0609551001 CR0605551001 CR0606551001 60 CR0729551001 CR0725551001 CR0726551001 72 CR0969551001 CR0965551001 CR0966551001 96 CR1209551001 CR1205551001 CR1206551001 120 CR1449551001 CR1445551001 CR1446551001 144 CP0249441001 CP0245441001 CP0246441001 24 CP0369441001 CP0365441001 CP0366441001 36 CP0489551001 CP0485551001 CP0486551001 48 CP0609551001 CP0605551001 CP0606551001 60 CP0729551001 CP0725551001 CP0726551001 72 Tension Newtons (lbs) Nominal Diameter Weight inches (mm) .52 (13.3) .63 (15.9) .63 (15.9) .69 (17.6) .76 (19.3) .89 (22.5) 1.035 (26.3) .98 (25.0) .52 (12.9) .61 (16.5) .62 (15.8) .68 (17.2) .74 (18.9) lbs/1,000ft (kg/km) 87 (130) 128 (190) 121 (180) 148 (220) 185 (275) 289 (400) 366 (545) 275 (410) 104 (155) 148 (220) 141 (210) 171 (255) 212 (315) Bending Radius Inches (mm) installation Long Term installation Long Term 3000 (674) 4500 (1012) 4000 (899) 5000 (1124) 6000 (1349) 8000 (1798) 10000 (2248) 12000 (2698) 3000 (674) 4500 (1012) 4000 (899) 5000 (1124) 6000 (1349) 1500 (337) 2250 (506) 2000 (450) 2500 (562) 3000 (674) 4000 (899) 5000 (1124) 6000 (1349) 1500 (337) 2250 (506) 2000 (450) 2500 (562) 3000 (674) 22 (8.7) 26 (10.2) 26 (10.2) 29 (11.4) 31 (12.2) 37 (14.6) 42 (16.5) 40 (15.7) 22 (8.7) 26 (10.2) 26 (10.2) 28 (11.0) 31 (12.2) 14 (5.5) 16 (6.3) 16 (6.3) 18 (7.1) 20 (7.9) 23 (9.1) 27 (10.6) 25 (9.8) 14 (5.5) 16 (6.3) 16 (6.3) 18 (7.1) 19 (7.5) TEMPERATURE RANGE Storage/Shipping Operating Storage/Shipping Operating Riser Cable Plenum Cable -40F to +158F -4F to +158F -40F to +158F -4F to +158F -40C -20C -40C -20C to to to to +70C +70C +70C +70C OPTICAL SPECIFICATIONS Single-Mode (1310nm/1550nm) 0.50/0.50 dB/km 0.40/0.30 dB/km --/-- Maximum Attenuation Loss Typical Attenuation Loss Bandwidth MHz/km Multimode (50/125m) (850nm/1300nm) 3.5/2.0 dB/km 3.0/1.0 dB/km 400/400 Multimode (62.5/125m) (850nm/1300nm) 3.5/1.2 dB/km 3.0/1.0 dB/km 200/500 CABLE LENGTH - REEL SIZE Item Description Reel Height (inches) Reel Outside Width (inches) Reel Weight (lbs) Reel C 42 36 150 Capacity: meters / (feet) 24 36 48 60 72 Fiber Fiber Fiber Fiber Fiber CPC CPC CPC CPC CPC Fiber Types * 5 = 50/125/250m multimode 6 = 62.5/125/125m multimode 9 = 9/125m single-mode Contact the factory for special fiber types/performance 1,700 / (5,578) 1,200 / (3,937) 1,100 / (3,609) 750 / (2,461) 750 / (2,461) Note: Diameter and weight subject to change without notice Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 67 Alcoa Fujikura Ltd. Telecommunications Division BREAKOUT CABLE AFL's Breakout Cables combine multiple fiber flexibility with the strength of individually jacketed fibers. Breakout cables from AFL can be terminated for fanout assemblies. Other specific applications include: Rugged multi-fiber cross-connects Intrabuilding backbone Fiber backbone to communications closet Breakout Cable Fiber Sub-unit 900m Buffer Aramid Yarns PVC Jacket Central Member Core Wrap Tape Ripcord Outer Jacket Fiber Sub-unit 900m Buffer Aramid Yarns PVC Jacket Central Member Core Wrap Tape Ripcord Outer Jacket 68 FEATURES & BENEFITS 200/500 MHz km (increased bandwidth) for higher data rates Single-mode and multimode fiber available 900m buffer for reliable and secure connectorization with all types of fiber connectors (125/250/900m) Aramid yarn reinforcement for rugged protection Highly flexible for ease of routing OFNR-UL 1666 riser-rated, as well as Canadian UL and CSA FT-4 listed OFNP-UL 910 plenum-rated, as well as Canadian UL and CSA FT-6 listed Tested and designed in accordance to Bellcore GR-409-CORE Ease of stripping for field installable connectors or splicing Easily identifiable subunits Riser sub-units 2.4mm, Plenum sub-units 3.0mm Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A BREAKOUT CABLE MECHANICAL SPECIFICATIONS Item Number Riser Breakout Cable Plenum Breakout Breakout Cable Item Number Item Number Fiber Count Single-Mode 50/125m 62.5/125m BR0049241001 BR0045241001 BR0046241001 4 BR0069241001 BR0065241001 BR0066241001 6 BR0089241001 BR0085241001 BR0086241001 8 BR0109241001 BR0105241001 BR0106241001 10 BR0129241001 BR0125241001 BR0126241001 12 BP0049301001 BP0045301001 BP0046301001 4 BP0069301001 BP0065301001 BP0066301001 6 Tension Bending Radius Newtons (lbs) inches (mm) Nominal Diameter Weight inches lbs/1,000 ft (mm) (kg/km) 0.33 44 (8.5) (65) 0.40 64 (10.1) (95) 0.46 84 (11.6) (125) 0.52 111 (13.2) (165) 0.58 138 (14.7) (205) 0.36 60 (9.1) (90) 0.42 84 (10.6) (125) (674) Installation Long Term Installation Long Term 2,000 1,000 5.1 3.1 (448) (225) (130) (80) 3,000 1,500 6.3 3.9 (674) (337) (160) (100) 4,000 2,000 7.1 4.3 (899) (449) (180) (110) 5,000 2,500 8.3 5.1 (1,124) (561) (210) (130) 6,000 3,000 9.1 5.5 (1,398) (674) (230) (140) 2,000 1,000 5.9 3.5 (449) (225) (150) (90) 3,000 1,500 6.7 4.3 (337) (170) (110) TEMPERATURE RANGE Riser Cable Plenum Cable Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Single-Mode Multimode (50/125m) Multimode (62.5/125m) OPTICAL SPECIFICATIONS (1310nm/1550nm) (850nm/1300nm) (850nm/1300nm) Maximum Attenuation Loss 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 dB/km Typical Attenuation Loss 0.40/0.30 dB/km 3.0/1.0 dB/km 3.0/1.0 dB/km Bandwidth MHz/km --/-- 400/400 200/500 CABLE LENGTH - REEL SIZE Item Reel B Reel C Reel Height (inches) 24 42 Reel Outside Width (inches) 18 36 Reel Weight (lbs) 20 150 Capacity: meters / (feet) 4 Fiber Breakout 650 / (2,133) 3,000 / (9,843) 6 Fiber Breakout 500 / (1,641) 3,000 / (9,843) 8 Fiber Breakout 400 / (1,312) 2,960 / (9,712) 10 Fiber Breakout 300 / (984) 2,250 / (7,382) 12 Fiber Breakout 250 / (820) 1,800 / (5,906) Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 69 Alcoa Fujikura Ltd. Telecommunications Division RIBBON-LINK CABLE AFLs RIBBON-Link cables combine high fiber density in a small diameter, flexible package. These cables can be terminated with 12 fiber connectors or the fibers fanned out and terminated individually. Specific applications include: Direct interface to computers with the use of backplane style fiber connectors High density interconnection to wall outlets or patch panels with ribbon connector interfaces Micro-diameter fanout cables utilizing standard industry fiber connectors (ST(R), SC, FC, etc.) RIBBON-LinkTM Cable FEATURES & BENEFITS 2 Fiber Ribbon Cable 70 200/500 MHz km (increased bandwidth) for higher data rates Single-mode and multimode fiber types available Fiber counts up to twenty-four with unitized, zip configuration construction Maximum of twelve fibers per unit Skew matched ribbons available Easy interface to MT and MTP connectors as well as todays newest ribbon connectors Qualified to both UL Riser and Plenum, as well as Canadian UL and CSA Designed and tested in accordance with Bellcore GR-409-CORE Maximum fiber capacity in a small interconnect unit for ultra high density routing or wiring directly to a PC Easily identifiable colored fibers One cable for both riser and plenum applications Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A RIBBON-LINK CABLE MECHANICAL SPECIFICATIONS Item Number Configuration Fiber Count Single-Mode 50/125m 62.5/125m WP0049141102 WP0045141102 WP0046141102 Bending Radius Newtons (lbs) inches (mm) Weight inches lbs/1,000ft (mm) (kg/km) 0.09 X 0.16 4.7 1,100 550 2.6 1.6 (2.2 X 4.0) (7) (247) (124) (65) (40) 1,100 550 2.6 1.6 Installation Long Term Installation Long Term WP0069161102 WP0065161102 WP0066161102 6 0.09 X 0.16 5.4 (2.2 X 4.0) ( 8) (247) (124) (65) (40) WP0089181102 WP0085181102 WP0086181102 8* 0.09 X 0.16 6.1 1,100 550 2.6 1.6 (2.2 X 4.0) (9) (247) (124) (65) (40) WP01091A1102 WP01051A1102 WP01061A1102 10 0.09 X 0.16 6.7 1,100 550 2.6 1.6 (2.2 X 4.0) (10) (247) (124) (65) (40) 0.09 X 0.18 7.4 1,100 550 2.6 1.6 (2.2 X 4.5) (11) (247) (124) (65) (40) 10.8 2,200 550 2.6 1.6 WP01291C1102 WP01251C1102 Plenum RIBBON-LinkTM WP0089241102 Cable Cable WP0129261102 WP0169281102 WP01261C1102 12* WP0085241102 WP0086241102 8** 0.09 X 0.32 (2.2 X 8.2) (16) (494) (247) (65) (40) WP0125261102 WP0126261102 12** 0.09 X 0.32 12.1 2,200 550 2.6 1.6 (2.2 X 8.2) (18) (494) (247) (65) (40) 0.09 X 0.32 13.4 2,200 550 2.6 1.6 (2.2 X 8.2) (20) (494) (247) (65) (40) 0.09 X 0.32 17.8 2,200 550 2.6 1.6 (2.2 X 8.2) (22) (494) (247) (65) (40) 0.09 X 0.36 16.1 2,200 550 2.6 1.6 (2.2 X 9.2) (24) (494) (247) (65) (40) .11 6 500 250 2.0 1.2 (2.9) (7) (112) (56) (50) (30) WP0165281102 WP02092A1102 WP02052A1102 2F RIBBON Cable 4 Tension Nominal Diameter WP0166281102 WP02062A1102 16 20 WP02492C1102 WP02452C1102 WP02462C1102 24 WR0029301001 WR0025301001 WR0026301001 2 * Fibers are contained within one unit ** Fibers are contained within two units TEMPERATURE RANGE Storage/Shipping -40F to +158F -40C to +70C Operating -4F to +158F -20C to +70C Plenum Cable OPTICAL SPECIFICATIONS Single-Mode Multimode (50/125m) Multimode (62.5/125m) (1310nm/1550nm) (850nm/1300nm) (850nm/1300nm) Maximum Attenuation Loss 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 dB/km Typical Attenuation Loss 0.40/0.30 dB/km 3.0/1.0 dB/km 3.0/1.0 dB/km Bandwidth MHz/km --/-- 400/400 200/500 Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 71 Alcoa Fujikura Ltd. Telecommunications Division MINI-LINK I & II AFLs new MINI-Link cables combine high fiber density in an extremely small design. This cable is ideal for crowded cable trays and high fiber patch and/or splice panels. Interconnect cable for high density cable applications Exceptional stripping performance Small size ideal for crowded cable trays and high fiber count distribution panels Single-mode and multimode offered All standard EIA/TIA 568A colors MINI-Link I (1.6mm) FEATURES & BENEFITS Simplex and zipcord riser cable product Ideal for high density cable routing in fiber management trays or for patch panel to patch panel applications Also designed for patch panels in communication closets where cabling real estate conservation is a necessity Single-mode and multimode offered Cable tested and complies with bellcore GR-409-Core, Issue 1 UL listed type OFNR, US and Canadian MINI-Link II (900m) 72 Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER A MINI-LINK I & II MECHANICAL SPECIFICATIONS Nominal Item Number Configuration Single-Mode 50/125m 62.5/125m 100/140m Fiber Diameter Count 1.6 Simplex SR0019161001 SR0015161001 SR0016161001 SR0011161001 Riser Cable 900m InterSX0019091001 SX0015091001 SX0016091001 SX0011901001 connect Cable Weight Tension Newtons (lbs) Long Installation Term Bending Radius inches Long Installation Term mm kg/km 1 1.6 2.6 280 140 5 3 1 900m 0.7 60 25 4 2 TEMPERATURE RANGE Storage/Shipping -40F to 158F -40C to 70C Operation/Installation -4F to 158F -20C to 70C Storage/Shipping -20F to 158F -20C to 70C Operation/Installation -4F to 70F -20C to 70C 1.6mm Simplex Riser Cable 900m Interconnect Cable OPTICAL SPECIFICATIONS 1.6mm Simplex Riser Cable Single-Mode 50/125m 62.5/125m 100/140m 1300nm/1550nm 850nm/1300nm 850nm/1300nm 850nm/1300nm Maximum Attenuation Loss 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 dB/km 5.5/3.5 dB/km Bandwidth MHz/km -/- 400/400 160/500 100/100 900m Interconnect Cable Single-Mode 50/125m 62.5/125m 100/140m 1310nm/1550nm 850nm/1300nm 850/1300nm 850nm/1300nm Maximum Attenuation Loss 0.50/0.50 dB/km 3.5/2.0 dB/km 3.5/1.2 dB/km 5.5/3.5 dB/km Bandwidth MHz/km -/- 400/400 160/500 100/100 Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER 73 Alcoa Fujikura Ltd. Telecommunications Division 250 MICRON CABLE OPTIONS QUICK-STRIP TIGHT BUFFER CABLES Tight buffered fiber that strips down to 250 micron (primary coated) fiber in single, long passes Strips up to one meter in a single pass Enables ribbonizing of premise cable in multi-fiber applications Allows for packaging density in crowded splice tray environments Convenience of a loose tube cable (with splicing and fiber handling) combined with the convenience of a UL listed cable in one package Available with Alcoa Fujikura Ltd.s entire line of tight-buffered fiber cable products Minimal price premium for maximum product flexibility Colored fiber within colored buffers "Quick Strip" 125m 250m 900m 74 Visit us at www.AFLFiber.com. To place an order contact a sales representative at 1-800-AFL-FIBER