ABJ1,2,3,4,5
ORDERING INFORMATION
(If Agency standard required, please refer to the “with Agency standard type”. See next page.)
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABJ TYPE
Dust protected type (Mounting hole
2.3mm type)
Immersion protected type
(wire leads bottom type)
(Mounting hole
2.3mm type)
Immersion protected
(wire leads side type)
Long stroke type
12.8
6.5
6
Compliance with RoHS Directive
FEATURES
• Ultra-miniature size (12.8×6.5×6 mm)
• Sealed construction for use in adverse environment-Sealed
construction by epoxy resin and rubber cap greatly reduces possible
miscontact due to contaminants such as dust. Conforming to IP67* of
IEC protective construction classification
•Elastomer double molding technology, an industry first and ultrasonic
swaging technology contribute to uniform sealing in high production
quantities
• UL/CSA approved (Except the long stroke type of ABJ2 and the side
wire leads type.)
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtravel) from
the operating position is ample, the task of performing adjustments during
installation is easy.
Operating position accuracy ±0.4 mm
Overtravel= Min. 2.0 mm
As wide range of high pressure is achieved, a stable reliability is ensured
• Leaf lever side wire leads type added. We now offer two types.
M3 type installation hole
Fixed pin type
TYPICAL APPLICATIONS
• Industrial use video jack
•Automotive (ex. Device for opening and shutting of automobile doors)
* Based on the protective construction classification of IEC, items which
satisfy the test requirements are denoted with an IP designation.
Type of
switch
ABJ:
Turquoise
switch
J type
Size of
mounting hole
1:
2:
3:
4:
5:
1.2 mm
2.3 mm
3 mm
Fixed pin
(right side pin) type
Fixed pin
(left side pin) type
Te r minal
4:
5:
6:
7:
8:
Solder terminal
PC board terminal
Wire leads (bottom type)
Wire leads (right side type)
Wire leads (left side type)
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
(Wire leads
type only)
SPST-NO
(Wire leads
type only)
Actuator
0:
2:
4:
6:
8:
L:
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Leaf lever
(Mounting hole 3 mm
lead wire type only)
Long stroke type
Operating force
by pin plunger
(max.)
4:
6:
7:
1.23 N
1.96 N
2.45 N
(Long stroke
type only)
Contact
0:
1:
AgNi alloy
AgNi alloy
+ Au clad
Ex. ABJ 1 4 1 0 4 0
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
With Agency standard type
CONTACT ARRANGEMENT
APPLICABLE CURRENT RANGE (reference)
Type of
switch
ABJ:
Turquoise
switch
J type
Size of
mounting hole
1:
2:
3:
1.2 mm
2.3 mm
3 mm
Te r minal
4:
5:
6:
Solder terminal
PC board terminal
Wire leads
(bottom type)
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
(Wire leads
type only)
SPST-NO
(Wire leads
type only)
Actuator
0:
2:
4:
6:
8:
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Leaf lever
(Mounting hole 3 mm
lead wire type only)
Operating force by
pin plunger (max.)
4:
6:
1.23 N
1.96 N
Contact
0:
1:
AgNi alloy
AgNi alloy
+ Au clad
Agency
standard
9: UL/CSA
6 × 103
rated
Ex. ABJ 1 4 1 0 4 0 9
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
1. SPDT 2. SPST-NC (Wire leads type only) 3. SPST-NO (Wire leads type only)
COM NO NC COM NC COM NO
AgNi alloy
Note) OF: Value of pin plunger
1mA
100mA
1A
2A
0
30V
125V
5V
5V
15V
15V
DC
AC
OF1.23N OF1.96N
Au clad
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
PRODUCT TYPES
1. Dust protected type (Terminal type)
Mounting hole 1.2mm type / Mounting hole 2.3mm type
AgNi alloy
AgNi alloy + Au clad
2-(1). Immersion protected type (Bottom wire leads type)
Mounting hole 1.2mm type
AgNi alloy
Mounting hole 2.3mm type
AgNi alloy + Au clad
Actuator Operating force
Max.
Mounting hole 1.2 mm type Mounting hole 2.3 mm type
Solder terminal PC board terminal Solder terminal
Pin plunger 1.23 N ABJ1410409 ABJ1510409 ABJ2410409
1.96 N ABJ1410609 ABJ1510609 ABJ2410609
Hinge lever 0.39 N ABJ1412409 ABJ1512409 ABJ2412409
0.64 N ABJ1412609 ABJ1512609 ABJ2412609
Simulated roller lever 0.39 N ABJ1414409 ABJ1514409 ABJ2414409
0.64 N ABJ1414609 ABJ1514609 ABJ2414609
Roller lever 0.39 N ABJ1416409 ABJ1516409 ABJ2416409
0.64 N ABJ1416609 ABJ1516609 ABJ2416609
Actuator Operating force
Max.
Mounting hole 1.2 mm type Mounting hole 2.3 mm type
Solder terminal PC board terminal Solder terminal
Pin plunger 1.23 N ABJ1410419 ABJ1510419 ABJ2410419
1.96 N ABJ1410619 ABJ1510619 ABJ2410619
Hinge lever 0.39 N ABJ1412419 ABJ1512419 ABJ2412419
0.64 N ABJ1412619 ABJ1512619 ABJ2412619
Simulated roller lever 0.39 N ABJ1414419 ABJ1514419 ABJ2414419
0.64 N ABJ1414619 ABJ1514619 ABJ2414619
Roller lever 0.39 N ABJ1416419 ABJ1516419 ABJ2416419
0.64 N ABJ1416619 ABJ1516619 ABJ2416619
Actuator Operating force
Max.
Mounting hole 1.2 mm type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N ABJ1610409 ABJ1620409 ABJ1630409
1.96 N ABJ1610609 ABJ1620609 ABJ1630609
Hinge lever 0.39 N ABJ1612409 ABJ1622409 ABJ1632409
0.64 N ABJ1612609 ABJ1622609 ABJ1632609
Simulated roller lever 0.39 N ABJ1614409 ABJ1624409 ABJ1634409
0.64 N ABJ1614609 ABJ1624609 ABJ1634609
Roller lever 0.39 N ABJ1616409 ABJ1626409 ABJ1636409
0.64 N ABJ1616609 ABJ1626609 ABJ1636609
Actuator Operating force
Max.
Mounting hole 1.2 mm type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N ABJ1610419 ABJ1620419 ABJ1630419
1.96 N ABJ1610619 ABJ1620619 ABJ1630619
Hinge lever 0.39 N ABJ1612419 ABJ1622419 ABJ1632419
0.64 N ABJ1612619 ABJ1622619 ABJ1632619
Simulated roller lever 0.39 N ABJ1614419 ABJ1624419 ABJ1634419
0.64 N ABJ1614619 ABJ1624619 ABJ1634619
Roller lever 0.39 N ABJ1616419 ABJ1626419 ABJ1636419
0.64 N ABJ1616619 ABJ1626619 ABJ1636619
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
Mounting hole 2.3mm type
AgNi alloy
AgNi alloy + Au clad
Mounting hole 3mm type (Leaf lever type)
AgNi alloy
AgNi alloy + Au clad
2-(2). Immersion protected type (Side wire leads type)
Fixed pin (right side pin) type
AgNi alloy
AgNi alloy + Au clad
Actuator Operating force
Max.
Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N ABJ2610409 ABJ2620409 ABJ2630409
1.96 N ABJ2610609 ABJ2620609 ABJ2630609
Hinge lever 0.39 N ABJ2612409 ABJ2622409 ABJ2632409
0.64 N ABJ2612609 ABJ2622609 ABJ2632609
Simulated roller lever 0.39 N ABJ2614409 ABJ2624409 ABJ2634409
0.64 N ABJ2614609 ABJ2624609 ABJ2634609
Roller lever 0.39 N ABJ2616409 ABJ2626409 ABJ2636409
0.64 N ABJ2616609 ABJ2626609 ABJ2636609
Actuator Operating force
Max.
Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N ABJ2610419 ABJ2620419 ABJ2630419
1.96 N ABJ2610619 ABJ2620619 ABJ2630619
Hinge lever 0.39 N ABJ2612419 ABJ2622419 ABJ2632419
0.64 N ABJ2612619 ABJ2622619 ABJ2632619
Simulated roller lever 0.39 N ABJ2614419 ABJ2622419 ABJ2634419
0.64 N ABJ2614619 ABJ2624619 ABJ2634619
Roller lever 0.39 N ABJ2616419 ABJ2626419 ABJ2636419
0.64 N ABJ2616619 ABJ2626619 ABJ2636619
Actuator Operating force
Max.
Mounting hole 3 mm type
SPDT SPST-NC SPST-NO
Leaf lever 0.98 N ABJ3618409 ABJ3628409 ABJ3638409
1.27 N ABJ3618609 ABJ3628609 ABJ3638609
Actuator Operating force
Max.
Mounting hole 3 mm type
SPDT SPST-NC SPST-NO
Leaf lever 0.98 N ABJ3618419 ABJ3628419 ABJ3638419
1.27 N ABJ3618619 ABJ3628619 ABJ3638619
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N Right ABJ472840 ABJ473840
1.27 N Left ABJ482840 —
1.76 N Right ABJ472860 ABJ473860
1.76 N Left ABJ482860 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N Right ABJ472841 ABJ473841
1.27 N Left ABJ482841 —
1.76 N Right ABJ472861 ABJ473861
1.76 N Left ABJ482861 —
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
Fixed pin (left side pin) type
AgNi alloy
AgNi alloy + Au clad
Mounting hole 3mm type
AgNi alloy
AgNi alloy + Au clad
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole 2.3mm type
AgNi alloy
AgNi alloy + Au clad
SPECIFICATIONS
1. Contact rating
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N Right ABJ572840 ABJ573840
1.27 N Left ABJ582840 —
1.76 N Right ABJ572860 ABJ573860
1.76 N Left ABJ582860 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N Right ABJ572841 ABJ573841
1.27 N Left ABJ582841 —
1.76 N Right ABJ572861 ABJ573861
1.76 N Left ABJ582861 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC
Leaf lever 1.27 N Left ABJ382840
1.76 N ABJ382860
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC
Leaf lever 1.27 N Left ABJ382841
1.76 N ABJ382861
Actuator Operating force
Max.
Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger (Horizontal) 2.45 N *ABJ261L70 ABJ262L70 ABJ263L70
Actuator Operating force
Max.
Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger (Horizontal) 2.45 N *ABJ261L71 ABJ262L71 ABJ263L71
Type Operating force Max. Standard rating Low-level circuit rating
AgNi alloy contact
1.76 N, 1.96 N 2 A 125 V AC
2 A 30 V DC —
1.23 N, 1.27 N 1 A 125 V AC
1 A 30 V DC —
Long stroke type
AgNi alloy contact 2.45 N 1 A 125 V AC
1 A 30 V DC —
AgNi alloy + Au clad contact 1.23 N, 1.27 N
1.76 N, 1.96 N 0.1 A 125 V AC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
Long stroke type
AgNi alloy + Au clad contact 2.45 N 0.1 A 125 V AC
0.1 A 30 V DC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
2. Characteristics
3. Operating characteristics
Note: The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types.
Mechanical life
(O.T.: Specified value)
Leaf lever, Long stroke type Min. 5×105 (at 60 cpm)
Wire leads (right & left side type) Min. 3×105 (at 60 cpm)
Other types Min. 106 (at 60 cpm)
Electrical life at rated load
(O.T.: max.)
AgNi alloy contact type Min. 3×104 (at 20 cpm)
AgNi alloy + Au clad contact type Min. 105 (at 20 cpm)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
600 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s2{30 G} (Contact opening max. 1 msec.)
Contact resistance (Initial)
Silver contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Gold clad contact type
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load) Other type: 120 cpm
Long stroke type: 60 cpm
Ambient temperature –40°C to +85°C
Unit weight Approx. 0.5 g (IP50 type)
Type of actuator Operating force,
Max.
Release force,
Min
Pretravel,
Max. mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating position,
mm
Pin plunger
1.23N 0.15N
0.6 0.12 0.25
Mounting hole: 1.2
5.5±0.2
Mounting hole: 2.3
7.0±0.2
1.96N 0.25N
Hinge lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
6.8±1.0
Mounting hole: 2.3
8.3±1.0
0.64N 0.049N
Simulated roller lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
9.8±1.0
Mounting hole: 2.3
11.3±1.0
0.64N 0.049N
Roller lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
13.1 ±1.0
Mounting hole: 2.3
14.6±1.0
0.64N 0.049N
Leaf lever
0.98N 0.20N 6.0 1.0 2.5 Mounting hole: 3.0
16.0±2.0
1.27N 0.22N 2.6 0.5 1.4
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
1.76N 0.26N 2.6 0.5 1.4
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
1.27N 0.29N 6.0 1.0 2.5 Mounting hole: 3.0
16.0±2.0
Long stroke type 2.45N 0.20N — 0.5 2.0 2.5±0.4
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
DIMENSIONS mm General tolerance: ±0.25
1. Dust protected type
1-(1) PC board terminal
Mounting hole 1.2 mm type
Pin plunger
Operating Position
Pretravel 0.6Max. 1.5 dia
t=0.4
1.2±0.05 dia.
5.08±0.1
6
4.4
1.25±0.12
1.5±0.12
1.1±0.12
1.6
0.9
5.08±0.15 5.08±0.15
6-C 0.3
5.4±0.3
5.5±0.2
1.0
5.0±0.15
5.50
6.5±0.1
12.8±0.15
1.5±0.1 2 dia.
-0
+0.12
5.08±0.1
Pretravel, Max. mm 0.6
Movement differential, Max. mm 0.12
Overtravel, Min. mm 0.25
Operating
position
Distance from mounting
hole, mm 5.5±0.2
Distance from stand-off,
mm 7±0.3
Hinge lever
8.6 4.4±0.4
6.8±1.0
8.3±1.2
Pretravel 3.0Max.
R13.3
4.2
3
5.08±0.15.08±0.1
1.2±0.05 dia.
Operating Position
Pretravel, Max. mm 3.0
Movement differential, Max. mm 0.5
Overtravel, Min. mm 0.5
Operating
position
Distance from mounting
hole, mm 6.8±1.0
Distance from stand-off,
mm 8.3±1.2
Simulated roller lever
Pretravel 3.0Max.
9.8±1.0
Operating Position
11.3±1.2
R13.2
R2.5
3.3±0.4
3
1.2±0.05 dia.
5.08±0.1 5.08±0.1
Pretravel, Max. mm 3.0
Movement differential, Max. mm 0.5
Overtravel, Min. mm 0.5
Operating
position
Distance from mounting
hole, mm 9.8±1.0
Distance from stand-off,
mm 11.3±1.2
Roller lever
1.2±0.05 dia.
5.08±0.1 5.08±0.1
Operating Position
13.1±1.0
Pretravel 3.0Max.
3.4±0.4
R13.8
2.2
4.8 dia.
14.6±1.2
Pretravel, Max. mm 3.0
Movement differential, Max. mm 0.5
Overtravel, Min. mm 0.5
Operating
position
Distance from mounting
hole, mm 13.1±1.0
Distance from stand-off,
mm 14.6±1.0
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
1-(2) Solder terminal mm General tolerance: ±0.25
Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types.
2. Immersion protected type
2-(1) Bottom wire leads type
Pin plunger
Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types.
As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types.
2. Dimensions of the actuator type are the same as corresponding PC board terminal types.
Pin plunger
Mounting hole: 1.2 mm Mounting hole: 2.3 mm
1.5 dia
0.4
6
4.4
Pretravel 0.6Max.
5.08±0.15
1.5±0.1
5±0.15
12.8±0.15
+0.12
5.08±0.15
2-1.2-0
5.4±0.3
6-C 0.3
5.5±0.2
Operating Position
1.0
5
1.5
6.5±0.1
dia.
1.2 2.2
1.5 dia
0.4
6
4.6±0.3
6.5±0.15
2.4-.05
+0.1
5.7
1.5
2
0.5
5.08±0.15
12.8±0.15
5.08±0.15
6
4.8±0.1
1.2 2.2
2.4-0.05
+0.1 dia.
1.7
Pretravel 0.6Max
Operating Position
7±0.2
Mounting hole: 1.2 mm
7.50
300±10
5±2
13.9
6
Thickness of the lead
wire: 0.3 mm2
UL/CSA approved type:
AWG22
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Mounting hole: 2.3 mm
COM N.O. N.C.
6.5±0.15
300±10
5±2
13.9±0.4
8.2
Thickness of the lead
wire: 0.3 mm2
UL/CSA approved type:
AWG22
Color of the lead wire:
COM ...Black
N.C. ....Red
N.O. ...White
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
Leaf lever mm General tolerance: ±0.25
Mounting hole: 3 mm
4.8±0.3
R3.25
20.0±0.4
R2.5
13±0.1
5
9.25
6.5
8.6±12.5
Free Position
(19.0)
Operating Position
(16±2)
(11.5 min.)
Totaltravel Position
7.5
300±10
5±2
Pretravel 6 max.
3 dia.
+0
–0.15
3.1+0.1
–0.05
5
9
6
4.4
3.3
Pretravel, Max. mm 6.0
Movement differential,
Max. mm 1.0
Overtravel, Min mm 2.5
Operating
position
Distance from
mounting hole,
mm
16.0±2.0
2-(2) Side wire leads type
Fixed pin type
Right side pin type
Right wire leads type
16.65
3.45
8.55
6.7
6.0
5.0
300±10
5±2
7.6±1.0
9.53±0.1
9.53
C0.2
R2.0
2.6±0.05
6.9±0.3
2.6±0.05
2.2±0.05 dia.
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
5.0+0.0
−0.2
Pretravel, Max. mm 2.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 1.4
Operating
position
Distance from
mounting hole,
mm
10.7±0.7
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
Right side pin type mm General tolerance: ±0.25
Left wire leads type
16.65
3.45
8.55
300±10
5±2
7.6±1.0
R2.0
2.6±0.05
6.9±0.3
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
9.53±0.1
9.53
C0.2
2.6±0.05
2.2±0.05 dia.
6.7
6.0
5.0
5.0+0.0
−0.2
Pretravel, Max. mm 2.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 1.4
Operating
position
Distance from
mounting hole,
mm
10.7±0.7
Left side pin type
Right wire leads type
16.65
3.45
8.55
6.7
6.0
5.0
300±10
5±2
7.6±1.0
9.53±0.1
9.53
C0.2
R2.0
2.6±0.05
6.9±0.3
2.6±0.05
2.2±0.05 dia.
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
5.0+0.0
−0.2
Pretravel, Max. mm 2.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 1.4
Operating
position
Distance from
mounting hole,
mm
10.7±0.7
Left side pin type
Left wire leads type
16.65
3.45
8.55
6.7
6.0
5.0
300±10
5±2
7.6±1.0
9.53±0.1
9.53
C0.2
R2.0
2.6±0.05
6.9±0.3
2.6±0.05
2.2±0.05 dia.
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
5.0+0.0
−0.2
Pretravel, Max. mm 2.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 1.4
Operating
position
Distance from
mounting hole,
mm
10.7±0.7
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABJ1,2,3,4,5
Mounting hole 3mm type mm General tolerance: ±0.25
5.0
C0.30
R2.0
3.1+0.1
−0
Free position (F.P.)
18.6 max.
Operating position (O.P.)
16.25±0.7
Totaltravel position (T.T.P.)
(14.1)
5.8±1.0 12.3
1.85±0.3
19.6
4.0
9.0
3.3
6.0
300±10
5±213.0±0.1
6.0+0.2
−0.15
8.4+0.1
−0.3
3.0+0
−0.1 dia.
Pretravel, Max. mm 2.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 1.4
Operating
position
Distance from
mounting hole,
mm
16.25±0.7
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole: 2.3 mm
Free position (F.P.)
3.2 max.
Operating position (O.P.)
2.5±0.4
2.0 dia.
8.1
8.2
300±10
16.7
4.95
12.81.0
6.0±0.15
2.4+0.1
−0.05 19.4
2.5±0.1
4.8±0.1
5±2
13.9±0.4
COM NO NC
2.4 dia.
+0.1
−0.05
3.0 dia.
+0.
−0.15
9.0
6.0
C0.6
Movement differential,
Max. mm 0.5
Overtravel, Min mm 2.0
Operating position 2.5 ±0.4
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
