31
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz for FM-IF Tuners
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
1. Little dispersion of amplitude characteristics and
phase characteristics (G. D. T. characteristics)
2. The SFELA10M7G_X series has G. D. T. characteristics
and is useful for obtaining low distortion.
SFELA10M7F_L series, in these ceramic filters,
being in harmony with flatness of G. D. T.,
roundness of the amplitude and selectivity
characteristics, therefore, these ceramic filters
are suitable to high-grade stereo tuners. Even in
mismatching conditions, they can keep little
distortion because of low Qm of ceramic material.
The SFELA10M7FA0G series is based on
SFELA10M7FA00/GA00/HA00, and it obtains high
selectivity with low loss.
There is little dispersion of amplitude and
G. D. T. characteristics, and low distortion rate
can be obtained.
3. All products are inspected the flatness of G. D. T.
characteristics.
MARKING
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
10.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7JAXE-B0
MARKING
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
10.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HAXD-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HA0G-B0
MARKING
EIAJ
CODE
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
11.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAXX-B0
MARKING
EIAJ
CODE
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
11.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAXA-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GALP03-B0
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
32
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GALM-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GA0G-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FALL-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FA0G-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
GDT Bandwidth
(kHz)
Input/Output
Impedance
(ohm)
SFELA10M7JAXE-B0 10.700 ±30kHz 150 ±30kHz 500 max. 14.0 max. 35 min. fo±50 min.[within 0.15µsec.] 330
SFELA10M7HAXD-B0 10.700 ±30kHz 180 ±30kHz 530 max. 14.0 max. 33 min. fo±60 min.[within 0.15µsec.] 330
SFELA10M7HA0G-B0 10.700 ±30kHz 180 ±40kHz 520 max. 7.0 max. 40 min. fo±45 min.[within 0.5µsec.] 330
SFELA10M7GAXX-B0 10.700 ±30kHz 250 ±40kHz 670 max. 12.0 max. 25 min. fo±110 min.[within 0.2µsec.] 330
SFELA10M7GAXA-B0 10.700 ±30kHz 220 ±40kHz 610 max. 12.5 max. 30 min. fo±80 min.[within 0.15µsec.] 330
SFELA10M7GALP03-B0 10.700 ±30kHz 250 ±50kHz 650 max. 10.0 max. 30 min. fo±65 min.[within 0.25µsec.] 330
SFELA10M7GALM-B0 10.700 ±30kHz 230 ±50kHz 600 max. 9.0 ±2.0dB 30 min. fo±60 min.[within 0.25µsec.] 330
SFELA10M7GA0G-B0 10.700 ±30kHz 230 ±50kHz 600 max. 7.0 max. 40 min. fo±60 min.[within 0.5µsec.] 330
SFELA10M7FALL-B0 10.700 ±30kHz 280 ±50kHz 700 max. 7.0 ±2.0dB 25 min. fo±70 min.[within 0.25µsec.] 330
SFELA10M7FA0G-B0 10.700 ±30kHz 280 ±50kHz 650 max. 4.0 ±2.0dB 30 min. fo±85 min.[within 0.5µsec.] 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
33
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7JAXE-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 5.00
Frequency (MHz)
G.D.T. (µsec.)
1 4.75
2 4.50
3 4.25
4 4.00
5 3.75
6 3.50
7 3.25
SFELA10M7HAXD-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 4.50
Frequency (MHz)
G.D.T. (µsec.)
1 4.25
2 4.00
3 3.75
4 3.50
5 3.25
6 3.00
7 2.75
SFELA10M7HA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
SFELA10M7GAXX-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.25
Frequency (MHz)
G.D.T. (µsec.)
1 3.00
2 2.75
3 2.50
4 2.25
5 2.00
6 1.75
7 1.50
SFELA10M7GAXA-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.75
Frequency (MHz)
G.D.T. (µsec.)
1 3.50
2 3.25
3 3.00
4 2.75
5 2.50
6 2.25
7 2.00
SFELA10M7GALP03-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.75
Frequency (MHz)
G.D.T. (µsec.)
1 3.50
2 3.25
3 3.00
4 2.75
5 2.50
6 2.25
7 2.00
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
34
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFELA10M7GALM-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 4.00
Frequency (MHz)
G.D.T. (µsec.)
1 3.75
2 3.50
3 3.25
4 3.00
5 2.75
6 2.50
7 2.25
SFELA10M7GA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
SFELA10M7FALL-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.25
Frequency (MHz)
G.D.T. (µsec.)
1 3.00
2 2.75
3 2.50
4 2.25
5 2.00
6 1.75
7 1.50
SFELA10M7FA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 5.00
Frequency (MHz)
G.D.T. (µsec.)
1 4.50
2 4.00
3 3.50
4 3.00
5 2.50
6 2.00
7 1.50
■ Frequency Characteristics (Spurious)
SFELA10M7JAXE-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7HAXD-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7HA0G-B0
Attenuation (dB)
0
9.900 10.300 10.700 11.100 11.500
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GAXX-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
35
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFELA10M7GAXA-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GALP03-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GALM-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GA0G-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7FALL-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7FA0G-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16