MASWSS0192 GaAs SPDT Switch DC - 3.0 GHz Rev. V1 Features Functional Schematic Test and Measurement and Low/Medium Power Telecommunication Applications Low Insertion Loss: 0.18 dB @ 1 GHz Moderate Isolation: 25 dB @ 1 GHz Low Power Consumption: < 2 A @ 2.5 V Fast Settling for Low Gate Lag Requirements Lead-Free SC-70 (SOT-363) Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible C=39pF Description M/A-COM's MASWSS0192 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASWSS0192 is ideally suited for applications where very small size and low cost are required. The MASWSS0192 can be used for low / medium power, low loss requirements in all systems operating up to 3 GHz, including PCS, GSM, DCS, Blue Tooth, T&M, and other receive chain applications. V2 RF1 GND RF2 C=39pF C=39pF Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 1 Part Number Package MASWSS0192 Bulk Packaging MASWSS0192TR-3000 3000 piece reel MASWSS0192SMB Sample Board 1. RFC PIN 1 The MASWSS0192 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information V1 Absolute Maximum Ratings 2,3 Reference Application Note M513 for reel size information. 2. 3. Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz) 2.5 V Control 5.0 V Control Operating Voltage +25 dBm +34 dBm +8.5 volts Operating Temperature -40 C to +85 C Storage Temperature -65 C to +150 C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0192 GaAs SPDT Switch DC - 3.0 GHz Rev. V1 Electrical Specifications: TA = 25C, VC = 0 V / 2.5 V 4, PIN = +10 dBm, Z0 = 50 5 4. 5. 6. Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 6 DC - 1.0 GHz DC - 3.0 GHz dB dB -- -- 0.18 0.35 0.40 0.60 Isolation DC - 1.0 GHz DC - 3.0 GHz dB dB 20.0 9.5 24.0 13.5 -- -- VSWR DC - 1.0 GHz DC - 3.0 GHz Ratio Ratio -- -- 1.1:1 1.2:1 -- -- IP2 1 GHz, Two Tone, +7 dBm / tone, 20 MHz Spacing, 3 V dBm -- 93 -- IP3 1 GHz, Two Tone, +7 dBm / tone, 20 MHz Spacing, 3 V dBm -- 53 -- P1dB VC = 0.2 V / 2.7 V VC = 0.2 V / 3.0 V dBm dBm -- -- 27.5 28.5 -- -- Trise, Tfall 10% to 90% RF and 90% to 10% RF nS -- 22 -- Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS -- 5 -- Transients In-band mV -- 36 -- Control Current -- A -- 0.20 5 RON t > 90 mS after OFF to ON Switching (settled) -- 2.50 4.7 Gate Lag |Ron| between 15 S and 90 mS after OFF to ON Switching -- 0.15 0.7 Alternate voltage operation of VC = 0 V / 5 V or -5 V / 0 V will yield similar insertion loss, isolation, VSWR, switching, RON, and gate lag results. For positive voltage control, external DC blocking capacitors are required on all RF ports. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz. Truth Table 7,8 7. 8. Qualification Control V1 Control V2 RFC-RF1 RFC-RF2 1 0 On Off 0 1 Off On Differential voltage, V (state 1) - V (state 0), must be 2.5 V minimum, but must not exceed 8.5 V. 0 = 0 V to 0.5 V; 1 = 2.5 V to 5 V or 0 = -5 V to -2.5 V, 1 = -0.5 to 0 V. Qualified to M/A-COM specification REL-201, Process Flow -2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0192 GaAs SPDT Switch DC - 3.0 GHz Rev. V1 Typical Performance Curves Insertion Loss Isolation 2.0 45 +25C -40C +85C 40 +25C -40C +85C 1.5 35 30 1.0 25 20 0.5 15 0.0 0 1 2 3 4 5 10 6 0 1 Frequency (GHz) 2 3 4 5 6 Frequency (GHz) S11, S22 Gate Lag (RON vs. Time) Including VCTL, 0-3 V Step 5.0 -5 Vcontrol S22 (dB) S11 (dB) -10 4.5 -15 4.0 -20 3.5 -25 3.0 -30 2.5 -35 0 1 2 3 4 5 6 Frequency (GHz) 2.0 0.00 Ron (Ohm) 0.02 0.04 0.06 0.08 0.10 0.12 Time (S) Lead-Free SC-70 (SOT-363) Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0192 GaAs SPDT Switch DC - 3.0 GHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support