G084SN05-V8 - AU Optronics Corporation

G084SN05 V8 rev. 0.0

1/23

G084SN05 V8

■

■■

■

Preliminary Specifications

□

□□

□ Final Specifications

Module 8.4 Inch Color TFT-LCD

Model Name G084SN05 V8

Customer Date

Checked &

Approved by

Note: This Specification is subject to change

without notice.

Approved by Date

Debbie Chiu

2009/2/20

Prepared by

Alex Cheng

2009/2/20

General Display Business Division /

AU Optronics corporation

G084SN05 V8 rev. 0.0

2/23

G084SN05 V8

Contents

1. Operating Precautions ..................................................................................... 4

2. General Description ......................................................................................... 5

2.1 Display Characteristics ...................................................................................................... 5

2.2 Optical Characteristics ....................................................................................................... 6

3. Functional Block Diagram ............................................................................... 8

4. Absolute Maximum Ratings............................................................................. 9

4.1 Absolute Ratings of TFT LCD Module................................................................................ 9

4.2 Absolute Ratings of Environment....................................................................................... 9

5. Electrical Characteristics............................................................................... 10

5.1 TFT LCD Module ............................................................................................................. 10

5.2 Backlight Unit................................................................................................................... 12

6. Signal Characteristic...................................................................................... 13

6.1 Pixel Format Image.......................................................................................................... 13

6.2 Signal Description ............................................................................................................ 14

6.3 Scanning Direction........................................................................................................... 15

6.4 The Input Data Format..................................................................................................... 16

6.5 Interface Timing ............................................................................................................... 17

6.6 Power ON/OFF Sequence ............................................................................................... 18

7. Connector & Pin Assignment ........................................................................ 19

7.1 TFT LCD Signal (CN1): LVDS Connector ........................................................................ 19

7.2 LED Backlight Unit (CN2): Backlight Connector .............................................................. 19

8. Reliability Test Criteria................................................................................... 20

9. Mechanical Characteristics ........................................................................... 21

9.1 LCM Front View ............................................................................................................... 21

9.2 LCM Rear View................................................................................................................ 22

10. Label and Packaging.................................................................................... 23

10.1 Shipping Label (on the rear side of TFT-LCD display) ................................................... 23

10.2 Carton Package ............................................................................................................. 23

11 Safety.............................................................................................................. 23

11.1 Sharp Edge Requirements............................................................................................. 23

11.2 Materials......................................................................................................................... 23

11.3 Capacitors ...................................................................................................................... 23

11.4 National Test Lab Requirement...................................................................................... 23

G084SN05 V8 rev. 0.0

3/23

G084SN05 V8

Record of Revision

Version and Date Page

Old description New Description

0.0 2009/02/20 All First Edition

G084SN05 V8 rev. 0.0

4/23

G084SN05 V8

1. Operating Precautions

1) Since front polarizer is easily damaged, please be cautious not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.

5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard

surface.

6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling

TFT-LCD Module.

7) Do not open nor modify the module assembly.

8) Do not press the reflector sheet at the back of the module to any direction.

9) In case if a module has to be put back into the packing container slot after it was taken out

from the container, do not press the center of the LED Reflector edge. Instead, press at the

far ends of the LED Reflector edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the

Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do

not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be

taken into consideration that no bending/twisting forces are applied to the TFT Module from

outside. Otherwise the TFT Module may be damaged.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD

module should be supplied by power complied with requirements of Limited Power Source

(IEC60950 or UL1950), or be applied exemption.

13) Severe temperature condition may result in different luminance, response time.

14) Continuous operating TFT-LCD Module under high temperature environment may accelerate

LED light bar exhaustion and reduce luminance dramatically.

15) The data on this specification sheet is applicable when LCD module is placed in landscape

position.

16) Continuous displaying fixed pattern may induce image sticking. It is recommended to use

screen saver or shuffle content periodically if fixed pattern is displayed on the screen.

G084SN05 V8 rev. 0.0

5/23

G084SN05 V8

2. General Description

This specification applies to the 8.4 inch color TFT LCD module G084SN05 V8.

G084SN05 V8 designed with wide viewing angle; wide operating temperature and long life LEDs

backlight is well suited to be the display units for Industrial Applications.

LED driving board for backlight unit is included in this panel and the structure of the LED units is

replaceable.

G084SN05 V8 is built in timing controller and LVDS interface.

The screen format is intended to support the SVGA (800(H) x 600(V)) screen and 16.2M (RGB

8-bits) or 262k colors (RGB 6-bits).

G084SN05 V8 is a RoHS product.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25

℃

condition:

Items Unit Specifications

Screen Diagonal [inch] 8.4 ( 213.4mm )

Active Area [mm] 170.4(H) x 127.8(V)

Pixels H x V 800x3(RGB) x 600

Pixel Pitch [mm] 0.213x 0.213

Pixel Arrangement R.G.B. Vertical Stripe

Display Mode TN, Normally White

Nominal Input Voltage VDD [Volt] 3.3 typ.

Typical Power Consumption [Watt] 4.2 typ.

Weight [Grams] TBD

Physical Size [mm] 203.0(W) x 142.5(H) x 8.0(D) (typ.)

Electrical Interface 1 channel LVDS

Surface Treatment Anti-glare, Hardness 3H

Support Color 262K(6-bit) / 16.2M(8-bit)

Temperature Range

Operating

Storage (Non-Operating)

[

o

C]

[

o

C]

-30 to +85 (panel surface temperature)

-30 to +85

RoHS Compliance RoHS Compliance

G084SN05 V8 rev. 0.0

6/23

G084SN05 V8

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25

℃

(Room Temperature):

Item Unit Conditions Min. Typ. Max. Note

White Luminance [cd/m2] I

F

= 80mA

(center point) 350 450 - 1

Uniformity % TBD - - - -

Contrast Ratio 400 600 - 2

[msec] Rising - 20 30

[msec] Falling - 10 20

Response Time

[msec] Raising + Falling - 30 50

3

[degree]

Horizontal (Right)

CR

≧

10 (Left)

70

80

-

Viewing Angle

[degree]

Vertical (Upper)

CR

≧

10 (Lower)

65

50

80

60

-

4

Red x TBD TBD

TBD

Red y TBD TBD

TBD

Green x TBD TBD

TBD

Green y TBD TBD

TBD

Blue x TBD TBD

TBD

Blue y TBD TBD

TBD

White x 0.26 0.31

0.36

Color / Chromaticity

Coordinates

(CIE 1931)

White y 0.28 0.33

0.38

Color Gamut % 45 -

Note 1: Measurement method

Equipment : Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)

Aperture 1 with 50cm viewing distance

∘

Test Point Center

Environment < 1 lux

LCD Module

SR_3 or

equivalent

Measuring distance

Module Driving Equipment

G084SN05 V8 rev. 0.0

7/23

G084SN05 V8

Note 2

：

Definition of contrast ratio (CR):

Note 3: Definition of response time:

The output signals of photo detector are measured when the input signals are changed from “White” to “Black”

(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and

90% of amplitudes. Please refer to the figure as below.

Note 4: Definition of viewing angle

Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180°

≧

vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ)

horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically

perpendicular to the display surface with the screen rotated to its center to develop the desired

measurement

viewing angle.

Contrast ratio (CR)=

Brightness on the “White” state

Brightness on the “Black” state

100

90

10

0

%

Optical

response

White

Black

White

Tf

Tr

90

10

0

Optical

response

White

Black

White

Tr

G084SN05 V8 rev. 0.0

8/23

G084SN05 V8

3. Functional Block Diagram

The following diagram shows the functional block of the 8.4 inch color TFT/LCD module:

G084SN05 V8 rev. 0.0

9/23

G084SN05 V8

4. Absolute Maximum Ratings

4.1 Absolute Ratings of TFT LCD Module

Item Symbol Min Max Unit Conditions

Logic/LCD Drive

Voltage

V

DD

-

0.3

+

3.6

[Volt]

4.2 Absolute Ratings of Environment

Item Symbol Min Max Unit

Operating Temperature

TOP -30 +85 [

o

C]

Operation Humidity HOP 5 90 [%RH]

Storage Temperature

TST -30 +85 [

o

C]

Storage Humidity HST 5 90 [%RH]

Note: Maximum Wet-Bulb should be 39 and no condensation.

℃

G084SN05 V8 rev. 0.0

10/23

G084SN05 V8

5. Electrical Characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Symbol Parameter Min Typ Max Units

Remark

VDD Logic/LCD Drive

Voltage 3.0 3.3 3.6 [Volt]

±

10%

I

VDD

VDD Current - 270 330

[mA] 64 Gray Bar Pattern

(VDD=3.3V, at 60Hz)

I

rush LCD

LCD Inrush Current - - 3 [A] Note 1

P

VDD

VDD Power - 0.9 1.2 [Watt]

64 Gray Bar Pattern

(VDD=3.3V, at 60Hz)

Note 1: Measurement condition:

Q3

AO6402

G

D2S

D1

D5

D6

Q3

AO6402

G

D2 S

D1

D5

D6

C1

1uF/16V

C2

1uF/25V

C3

0.01uF/25V

F1

VR1

47K

+12.0V

VCC

SW1

SW MAG-SPST

1 2

(High to Low)

Control

Signal

(LCD Module Input)

R2

1K

+3.3V

R1

47K

R2

1K

VDD

64 Gray pattern

90%

10%

VDD rising time

0V

3.3V

470ms

G084SN05 V8 rev. 0.0

11/23

G084SN05 V8

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off.

Note: LVDS Signal Waveform.

Symbol Item Min.

Typ.

Max.

Unit

Remark

VTH Differential Input High Threshold - - 100 [mV]

VICM=1.2V

VTL Differential Input Low Threshold -100

- - [mV]

VICM=1.2V

｜

｜｜

｜

VID

｜

｜｜

｜

Input Differential Voltage 100 400 600 [mV]

VICM

Differential Input Common Mode

Voltage 1.1 1.6 [V] VTH/VTL=

±

100mV

VICM

G084SN05 V8 rev. 0.0

12/23

G084SN05 V8

5.2 Backlight Unit

5.2.1 Parameter guideline for LED backlight

Following characteristics are measured under a stable condition using an inverter at 25 (Room Temperature):

℃

Symbol Parameter Min. Typ.

Max. Unit Remark

VCC Input Voltage 10.8 12 12.6 [Volt]

I

VCC

Input Current - 0.27 - [A] 100% PWM Duty

P

VCC

Power Consumption

- 3.24 TBD [Watt]

100% PWM Duty

Irush

LED

Inrush Current - - TBD [A] at rising

time=470us

F

PWM

Dimming Frequency

200 - 20K [Hz]

Swing Voltage 3 3.3 5.5 V

Dimming Duty Cycle

TBD - 100 %

Operation

Lifetime

50,000

Hrs I

F

=80mA,

Ta= 25

o

C

Note 1: Ta means ambient temperature of TFT-LCD module.

Note 2: I

F

means LED unit forward current.

Note 3: VCC, Ivcc, P

VCC ,

Irush

LED

are defined for LED B/L.(100% duty of PWM dimming)

Note 4: If G084SN05 V8 module is driven by high current or at high ambient temperature & humidity condition. The

operating life will be reduced.

Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is

estimated data.

G084SN05 V8 rev. 0.0

13/23

G084SN05 V8

6. Signal Characteristic

6.1 Pixel Format Image

Following figure shows the relationship between input signal and LCD pixel format.

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

R

G

B

1 2 799 800

1st Line

600

th Line

G084SN05 V8 rev. 0.0

14/23

G084SN05 V8

6.2 Signal Description

LVDS is a differential signal technology for LCD interface and high speed data transfer device. The connector pin

definition is as below.

Pin No.

Symbol Description

1 VDD

Power Supply, 3.3V (typical)

2 VDD

Power Supply, 3.3V (typical)

3

UD

Vertical Reverse Scan Control,

When UD=Low or NC → Normal Mode.

When UD=High → Vertical Reverse Scan.

Note

4

LR

Horizontal Reverse Scan Control,

When LR=Low or NC → Normal Mode.

When LR=High → Horizontal Reverse Scan.

Note

5 RxIN1-

6 RxIN1+

LVDS differential data input Pair 0

7 GND

Ground

8 RxIN2-

9 RxIN2+

LVDS differential data input Pair 1

10 GND

Ground

11 RxIN3-

12 RxIN3+

LVDS differential data input Pair 2

13 GND

Ground

14 RxCLKIN-

15 RxCLKIN+

LVDS differential Clock input Pair

16 GND

Ground

17

SEL 68

LVDS 6/8 bit select function control,

Low or NC → 6 Bit Input Mode.

High → 8 Bit Input Mode.

Note

18 NC NC

19 RxIN4-

20 RxIN4+

LVDS differential data input Pair 3. Must be tied to Ground in

6 bit input mode.

Note : “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for “No Connected.”

G084SN05 V8 rev. 0.0

15/23

G084SN05 V8

6.3 Scanning Direction

The following figures show the image seen from the front view. The arrow indicates the direction of scan.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 1 Normal scan (Pin3, UD = Low or NC ; Pin4, RL = Low or NC)

Fig. 2 Reverse scan (Pin3, UD = Low or NC ; Pin4, RL = High)

Fig. 3 Reverse scan (Pin3, UD = High ; Pin4, RL = Low or NC)

Fig. 4 Reverse scan (Pin3, UD = High ; Pin4, RL = High)

G084SN05 V8 rev. 0.0

16/23

G084SN05 V8

6.4 The Input Data Format

6.4.1 SEL68

SEL68 = ”Low” or “NC” for 6 bits LVDS Input

G0 R5 R4 R3 R2 R1 R0

DE VS HS B5 B4 B3 B2

B1 B0 G5 G4 G3 G2 G1

RxCLKIN

RxIN1

RxIN2

RxIN3

SEL68 = “High” for 8 bits LVDS Input

G0 R5 R4 R3 R2 R1 R0

RSV B7 B6 G7 G6 R7 R6

DE VS HS B5 B4 B3 B2

B1 B0 G5 G4 G3 G2 G1

RxCLKIN

RxIN1

RxIN2

RxIN3

RxIN4

Note1: Please follow PSWG.

Note2: R/G/B data 7:MSB, R/G/B data 0:LSB

Signal Name Description Remark

R7

R6

R5

R4

R3

R2

R1

R0

Red Data 7 (MSB)

Red Data 6

Red Data 5

Red Data 4

Red Data 3

Red Data 2

Red Data 1

Red Data 0 (LSB)

Red-pixel Data

Each red pixel’s brightness data consists of these

8 bits pixel data.

G7

G6

G5

G4

G3

G2

G1

G0

Green Data 7 (MSB)

GreenData 6

GreenData 5

GreenData 4

GreenData 3

GreenData 2

GreenData 1

GreenData 0 (LSB)

Green-pixel Data

Each green pixel’s brightness data consists of these

8 bits pixel data.

B7

B6

B5

B4

B3

B2

B1

B0

Blue Data 7 (MSB)

Blue Data 6

Blue Data 5

Blue Data 4

Blue Data 3

Blue Data 2

Blue Data 1

Blue Data 0 (LSB)

Blue-pixel Data

Each blue pixel’s brightness data consists of these

8 bits pixel data.

RxCLKIN+

RxCLKIN-

LVDS Clock Input

DE Display Enable

VS Vertical Sync

HS Horizontal Sync

Note: Output signals from any system shall be low or Hi-Z state when VDD is off.

G084SN05 V8 rev. 0.0

17/23

G084SN05 V8

6.5 Interface Timing

6.5.1 Timing Characteristics

DE mode only

Parameter Symbol Min.

Typ.

Max.

Unit Condition

Clock frequency 1/ T

Clock

33.6

39.8

48.3 MHz

Period T

V

608

628

650

Active T

VD

600

Vertical

Section

Blanking T

VB

8 28 50

T

H

Period T

H

920

1056

1240

Active T

HD

800

Horizontal

Section

Blanking T

HB

120

256

440

T

Clock

Note: Frame rate is 60 Hz.

Note: DE mode.

6.5.2 Input Timing Diagram

G084SN05 V8 rev. 0.0

18/23

G084SN05 V8

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any

system shall be Hi-Z state or low level when VDD is off.

Power ON/OFF sequence timing

Value

Parameter

Min. Typ. Max.

Units

T1 0.5 - 10 ms

T2 0 40 50 ms

T3 200 - - ms

T4 200 - - ms

T5 0 16 50 ms

T6 0 - 10 ms

T7 1000 - - ms

The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off

the power when you plug the cable into the input connector or pull the cable out of the connector.

T7

T

5

T2

T3

VALID

DATA

T1

10%

90%

10%

90%

T4

T

6

Power Supply VDD

LVDS Signal

Backlight On

G084SN05 V8 rev. 0.0

19/23

G084SN05 V8

7. Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of accommodating

the following signals and will be following components.

7.1 TFT LCD Signal (CN1): LVDS Connector

Connector Name / Designation Signal Connector

Manufacturer STM

Connector Model Number MSB24013P20HA or compatible.

Mating Model Number STM-P24013P20

Pin No.

Signal Name Pin No. Signal Name

1 VDD 2 VDD

3 UD 4 LR

5 RxIN1- 6 RxIN1+

7 GND 8 RxIN2-

9 RxIN2+ 10 GND

11 RxIN3- 12 RxIN3+

13 GND 14 RxCKIN-

15 RxCKIN+ 16 GND

17 SEL 68 18 NC

19 RxIN4- 20 RxIN4+

7.2 LED Backlight Unit (CN2): Backlight Connector

Connector Name / Designation Lamp Connector

Manufacturer Entery

Connector Model Number ENTERY 3808K-F04N-02R or compatible.

Mating Model Number H208K-P04N-02B

Pin # Symbol Pin Description

1

VCC 12V input

2

GND

3

Display_ON/OFF

+3.3 V:ON, 0V:OFF

4

Dimming

PWM

G084SN05 V8 rev. 0.0

20/23

G084SN05 V8

8. Reliability Test Criteria

Items Required Condition Note

Temperature

Humidity Bias 40 /

℃

90%,300 hours

High Temperature

Operation 85

℃

,300 hours

Low Temperature

Operation -30

℃

,300 hours

Hot Storage 85 ,300 hours

℃

Cold Storage -30 ,300 hours

℃

Thermal Shock

Test -20 /30 min ,60 /30 min ,100cycles

℃ ℃

Shock Test

(Non-Operating) 50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)

Vibration Test

(Non-Operating)

1.5G, (10~200Hz, P-P)

30 mins/axis (X, Y, Z)

On/off test On/10 sec, Off/10 sec, 30,000 cycles

ESD Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point

Air Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point

Note 1

Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost

. Self-recoverable. No hardware failures.

G084SN05 V8 rev. 0.0

21/23

G084SN05 V8

9. Mechanical Characteristics

9.1 LCM Front View

G084SN05 V8 rev. 0.0

22/23

G084SN05 V8

9.2 LCM Rear View

G084SN05 V8 rev. 0.0

23/23

G084SN05 V8

10. Label and Packaging

10.1 Shipping Label

(on the rear side of TFT-LCD display)

TBD

10.2 Carton Package

TBD

11 Safety

11.1 Sharp Edge Requirements

There will be no sharp edges or corners on the display assembly that could cause injury.

11.2 Materials

11.2.1 Toxicity

There will be no carcinogenic materials used anywhere in the display module. If toxic materials are

used, they will be reviewed and approved by the responsible AUO toxicologist.

11.2.2 Flammability

All components including electrical components that do not meet the flammability grade UL94-V1 in the

module will complete the flammability rating exception approval process.

The pRxINted circuit board will be made from material rated 94-V1 or better. The actual UL

flammability rating will be pRxINted on the pRxINted circuit board.

11.3 Capacitors

If any polarized capacitors are used in the display assembly, provisions will be made to keep them from

being inserted backwards.

11.4 National Test Lab Requirement

The display module will satisfy all requirements for compliance to:

UL 1950, First Edition U.S.A. Information Technology Equipment