1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Array
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (Capacitor type) Array
NFA31C Series (1206 Size)
c Dimensions
3.2±0.2
0.8±0.1 1.6±0.2
0.4±0.2 1.1±0.5
0.8±0.2
(1)
(7) (8) (9) (10)
(3) (4) (5) (6)
(2)
0.05 min.
0.05 min.
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
1 10 100 1000 2000
Frequency (MHz)
(50Ω - 50Ω)
Insertion Loss (dB)
0
20
40
60
80
100
NFA31CC223R1C4
NFA31CC222R1E4
NFA31CC102R1E4
NFA31CC471R1E4
NFA31CC221S1E4
NFA31CC101S1E4
NFA31CC470S1E4
NFA31CC220S1E4
c Equivalent Circuit
Input (Output)
Output (Input)
GND (1) (2) GND
No polarity.
(7) (8) (9) (10)
(3) (4) (5) (6)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 100
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFA31CC220S1E4p22pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC470S1E4p47pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC101S1E4p100pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC221S1E4p220pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC471R1E4p470pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC102R1E4p1000pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC222R1E4p2200pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C
NFA31CC223R1C4p22000pF ±20% 200mA 16Vdc 1000M ohm -40 to +85°C
Number of Circuit: 4
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Array
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
