Rev.A1 www.gulfsemi.com
TVR06J
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE: 600V CURRENT: 0.6A
FEATURE
DO-41\DO-204AL
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL TVR06J units
Maximum Recurrent Peak Reverse Voltage
Vrrm 600 V
Maximum RMS Voltage
Vrms 420 V
Maximum DC blocking Voltage
Vdc 600 V
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55
°C
If(av) 0.6 A
Peak Forward Surge Current 8.3ms single
half
sine-wave
superimposed
on
rated
load
Ifsm 30.0 A
Maximum Forward Voltage at rated Forward
Current and 25
°C
Vf 1.3 V
Maximum full load reverse current full cycle
average at 55
°C
Ambient
Ir(av) 100.0
µ
A
Maximum DC Reverse Current Ta =25
°C
at rated DC blocking voltage Ta =150
°C
Ir 5.0
200.0
µ
A
Maximum Reverse Recovery Time (Note 1)
Trr 250 nS
Typical Junction Capacitance (Note 2)
Cj 15.0 pF
Typical Thermal Resistance (Note 3)
Rth(ja) 55.0
°C
/W
Storage and Operating Junction Temperature
Tstg, Tj -65 to +175
°C
Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1 www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES TVR06J
