Silicon Zener Diode Series 1N746 thru 1N759, 1N4370A thru 1N4372A Features * Available in JAN, JANTX and JANTXV per MIL-PRF-19500/127 * Double Plug Construction * Metallurgically Bonded * Also available in DO-213 MELF style package Maximum Ratings Operating Temperature: -65C to +175C Storage Temperature: -65C to +175C DC Power Dissipation: 500 mW @ +50C Power Derating: 4 mW / C above +50C Forward Voltage @ 200mA: 1.1 volts maximum Electrical Specifications @ +25 C (Unless Otherwise Specified) JEDEC TYPE NUMBER NOMINAL ZENER VOLTAGE ZENER TEST CURRENT MAXIMUM ZENER IMPEDANCE VZ @ IZT IZT (NOTE 2) ZZT@ IZT (NOTE 1) MAXIMUM REVERSE CURRENT IR @ VR (NOTE 3) MAXIMUM ZENER CURRENT IZM VOLTS mA OHMS A VOLTS mA 1N4370A 1N4371A 1N4372A 2.4 2.7 3.0 20 20 20 30 30 29 100 60 30 1.0 1.0 1.0 155 140 125 1N746A 1N747A 1N748A 3.3 3.6 3.9 20 20 20 28 24 23 5 3 2 1.0 1.0 1.0 120 110 100 1N749A 1N750A 1N751A 4.3 4.7 5.1 20 20 20 22 19 17 2 5 5 1.0 1.5 2.0 90 85 75 1N752A 1N753A 1N754A 5.6 6.2 6.8 20 20 20 11 7 5 5 5 2 2.5 3.5 4.0 70 65 60 1N755A 1N756A 1N757A 7.5 8.2 9.1 20 20 20 6 8 10 2 1 1 5.0 6.0 7.0 55 50 45 1N758A 1N759A 10.0 12.0 20 20 17 30 1 1 8.0 9.0 40 35 NOTE 1: Zener voltage tolerance on "A" suffix is +5%. No Suffix denotes +10% tolerance, "C" suffix denotes +2% tollerance and "D" suffix denotes +1% tolerance. NOTE 2: Zener voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25C + 3C. NOTE 3: Zener impedance is derived by superimposing on IZT A 60Hz rms a.c. current equal to 10% of IZT Revision Date: 11/4/2009 New Product 1 1N746 thru1N759A & 1N4370 thru1N4372A (Including -1 Versions) Outline Drawing LEADED DESIGN DATA 0.080 MAX 2.03 DIA CASE: Hermetically sealed, DO - 35 1.000 MIN 25.400 LEAD MATERIAL: Copper clad steel LEAD FINISH: Tin / Lead POLARITY BAND (CATHODE) 0.175 MAX 4.44 0.018 / 0.022 DIA 0.457 / 0.559 1.000 MIN 25.400 THERMAL RESISTANCE: (RJEC): 250 C/W maximum at L = .375 in THERMAL IMPEDANCE: (ZJX): 35C/W maximum POLARITY: Diode to be operated with the banded (cathode) end positive MOUNTING POSITION: Any All dimensions in INCH mm Graphs Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001:2008 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2009 Aeroflex / Metelics. All rights reserved. Revision Date: 11/4/2009 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.