A3PJ-5713-24E - Omron Automation and Safety

CSM_A3P_DS_E_5_1

Lighted Pushbutton Switch (Square)

A3P

Large Square-bodied Lighted

Pushbutton Switches

• Excellent operating sensitivity.

• Excellent illumination with even surface brightness.

• Three-color models (green, orange, red; chameleon lighting)

included in lineup.

Refer to Safety Precautions for All Pushbutton Switches

and Safety Precautions on page 24.

List of Models

Note: The A3PJ is shown in the figure above as an example.

Model Appearance

A3PJ

(Rectangular)

A3PA

(Square)

A3PT

(Round)

52 max.

6.7

52 max.

6.7

52 max.

6.4

32 dia.

■ Specifications: Refer to page 15. ■ Panel cutout: Refer to page 21. ■ Dimensions: Refer to page 18.

■ Accessories, replacements, and tools: Refer to pages 13 to 15. ■ Precautions for correct use: Refer to page 24.

A3P

Model Number Structure

Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Pushbutton,

Lamp, and Switch.

For information on combinations, refer to Ordering Information on pages 3 to 7.

(5) (6)

24E R ............... Single screen

(1) (2) (3) (4) Upper Lower

A 3 P J - 90 B 1 1 - 24E RW ................... Horizontal 2-split screen

(2) Switch

Specifications

Standard Load

Microload

•Standard Load

250 VAC, 3 A

30 VDC, 3 A

•Microload

125 VAC, 0.1 A

30 VDC, 0.1 A

Minimum applicable load

5 VDC, 1 mA

•3PDT models are also

available.

Select from among the

individual products shown on

page 12.

Symbol

Operation

Momentary

SPDT

B Alternate

Momentary

DPDT

D Alternate

Symbol

Operation

Momentary

SPDT

F Alternate

Momentary

DPDT

H Alternate

(1) Shape of

Pushbutton

Momentary opera-

tion: Self-resetting

Alternate opera-

tion: Self-holding

Symbol

Shape

JRectan-

gular

A Square

T Round

(3) Screen Pattern

*1. With chameleon models, the whole

screen lights red, green, or orange.

When not lit, the display is white.

•

The available rectangular models are

shown below. Select from among the

individual products shown on page 10.

Colored-illumination models up

to the 4-split screen models are

available as individual Units.

Refer to page 8.

“Colored-illumination” models

operate in the way shown below:

Illumination-only models

Symbol

Screen pattern

Single screen

2-split screen

Chameleon *1

Note: 1. The chameleon screen pattern

is not available with A3PT models.

2. The chameleon screen pattern

is only available with 12 or 24-VDC

models.

Vertical 2-split

screen models

Horizontal 3-split

screen models

Vertical 3-split

screen models

4-split screen

models

The above diagrams show the Switches

with the " " mark facin

down.

White

Unlit Lit

Color

The built-in LED

is colored.

R (Red) Upper

W (White) Lower

(4) Case Color

Note: A3PT

models are

available in

light gray

only.

Sym-

bol

Color

1Black

2Light

gray

(5) Lighting

Method

LED-lighted Models

(A3PJ and A3PA

Models Only)

LED Lamp-

lighted Models

(A3PT Only)

•A3PJ and A3PA

can also be

ordered

separately. Refer

to page 10 for

details.

Incandescent

Lamp-lighted

Models

Symbol

Rated

voltage

05E 5 VDC

12E 12 VDC

24E 24 VDC

Symbol

Rated

voltage

05C 5 VDC

12C 12 VDC

24C 24 VDC

Symbol

Rated

voltage

6 VAC/VDC

14 VAC/VDC

28 VAC/VDC

(6)

Color of Pushbutton

For LED

•The chameleon

screen pattern is not

available with A3PT

models.

•The chameleon

screen pattern is only

available with 12 or

24-VDC models.

For Incandescent

Lamp

•Includes colored

plate. Refer to page

11 for details.

Symbol

Color

RRed

O orange

G green

Wwhite

Chameleon

Symbol

Color

symbol

Red,

orange,

white,

blue,

green

Number of Incandescent Lamps

Note: Lamp positions for single-screen A3PJ (rectangular model).

Screen pattern A3PJ A3PA A3PT

Single screen 2 1 2

Horizontal 2-split screen 4(Low-pow-

er incan-

descent

lamp)

2---

Vertical 2-split screen --- ---

Horizontal 3-split screen --- ---

4-split screen --- ---

Number of LED Lamps

*2. These split screen models are available only as individual Units.

They cannot be ordered as sets.

Screen pattern A3PJ A3PA A3PT

Single screen Models with built-in LED 2

Horizontal 2-split screen ---

Vertical 2-split screen

*2--- ---

Horizontal 3-split screen

Vertical 3-split screen

4-split screen

A3P

Ordering Information

Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises

the Pushbutton, Lamp, and Switch.

(Not all combinations are possible. Ask your OMRON representative for details.)

Standard Loads

Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PJ-90A11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.

Microloads

Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PJ-90E11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.

Contact type Standard load (250 VAC, 3 A; 30 VDC, 4 A)

Pushbutton

color

symbol

Operation Momentary operation (Self-resetting) Alternate operation (Self-holding)

Case color Black Light gray Black Light gray

Output Lighting

SPDT

LED

5 VDC A3PJ-90A11-05E(1) A3PJ-90A12-05E(1) A3PJ-90B11-05E(1) A3PJ-90B12-05E(1) R

12 VDC A3PJ-90A11-12E(1) A3PJ-90A12-12E(1) A3PJ-90B11-12E(1) A3PJ-90B12-12E(1)

24 VDC A3PJ-90A11-24E(1) A3PJ-90A12-24E(1) A3PJ-90B11-24E(1) A3PJ-90B12-24E(1)

Chameleon 12 VDC A3PJ-90AG1-12EK --- A3PJ-90BG1-12EK A3PJ-90BG2-12EK *1

24 VDC A3PJ-90AG1-24EK A3PJ-90AG2-24EK A3PJ-90BG1-24EK A3PJ-90BG2-24EK

Incandescent

lamp

6 VDC/VAC A3PJ-90A11-06 A3PJ-90A12-06 A3PJ-90B11-06 A3PJ-90B12-06

14 VDC/VAC A3PJ-90A11-14 A3PJ-90A12-14 A3PJ-90B11-14 A3PJ-90B12-14

28 VDC/VAC A3PJ-90A11-28 A3PJ-90A12-28 A3PJ-90B11-28 A3PJ-90B12-28

DPDT

LED

5 VDC A3PJ-90C11-05E(1) A3PJ-90C12-05E(1) A3PJ-90D11-05E(1) A3PJ-90D12-05E(1) R

12 VDC A3PJ-90C11-12E(1) A3PJ-90C12-12E(1) A3PJ-90D11-12E(1) A3PJ-90D12-12E(1)

24 VDC A3PJ-90C11-24E(1) A3PJ-90C12-24E(1) A3PJ-90D11-24E(1) A3PJ-90D12-24E(1)

Chameleon 12 VDC A3PJ-90CG1-12EK A3PJ-90CG2-12EK A3PJ-90DG1-12EK --- *1

24 VDC A3PJ-90CG1-24EK A3PJ-90CG2-24EK A3PJ-90DG1-24EK A3PJ-90DG2-24EK

Incandescent

lamp

6 VDC/VAC A3PJ-90C11-06 A3PJ-90C12-06 A3PJ-90D11-06 A3PJ-90D12-06

14 VDC/VAC A3PJ-90C11-14 A3PJ-90C12-14 A3PJ-90D11-14 A3PJ-90D12-14

28 VDC/VAC A3PJ-90C11-28 A3PJ-90C12-28 A3PJ-90D11-28 A3PJ-90D12-28

Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting)

Case color Black Light gray

Output Lighting

SPDT

LED

5 VDC A3PJ-90E11-05E(1) A3PJ-90E12-05E(1) R

12 VDC A3PJ-90E11-12E(1) A3PJ-90E12-12E(1)

24 VDC A3PJ-90E11-24E(1) A3PJ-90E12-24E(1)

Chameleon 12 VDC A3PJ-90EG1-12EK --- *1

24 VDC A3PJ-90EG1-24EK A3PJ-90EG2-24EK

Incandescent

lamp

6 VDC/VAC A3PJ-90E11-06 A3PJ-90E12-06

14 VDC/VAC A3PJ-90E11-14 ---

28 VDC/VAC A3PJ-90E11-28 A3PJ-90E12-28

DPDT

LED

5 VDC A3PJ-90G11-05E(1) --- R

12 VDC A3PJ-90G11-12E(1) A3PJ-90G12-12E(1)

24 VDC A3PJ-90G11-24E(1) A3PJ-90G12-24E(1)

Chameleon 12 VDC A3PJ-90GG1-12EK --- *1

24 VDC A3PJ-90GG1-24EK

Incandescent

lamp

6 VDC/VAC A3PJ-90G11-06 A3PJ-90G12-06

14 VDC/VAC A3PJ-90G11-14 A3PJ-90G12-14

28 VDC/VAC A3PJ-90G11-28 A3PJ-90G12-28

Rectangular

Models

(Single Screen)

A3PJ

(Single Screen) (1)

Individual models: Refer to pages 9 to 12.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises

the Pushbutton, Lamp, and Switch.

(Not all combinations are possible. Ask your OMRON representative for details.)

Standard Loads

Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milky white and transparent). Use the appropriate

combination.

Microloads

Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milky-white and transparent). Use the appropriate

combination.

Contact type Standard load (250 VAC, 3 A; 30 VDC, 4 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting) Alternate operation (Self-holding)

Case color Black Light gray Black Light gray

Output Lighting

SPDT

LED 5 VDC A3PJ-90A21-24E(1)(2) A3PJ-90A22-24E(1)(2) A3PJ-90B21-24E(1)(2) A3PJ-90B22-24E(1)(2) R O G W

Incandescent

lamp

6 VDC/VAC A3PJ-90A21-06 A3PJ-90A22-06 A3PJ-90B21-06 A3PJ-90B22-06

14 VDC/VAC A3PJ-90A21-14 A3PJ-90A22-14 A3PJ-90B21-14 A3PJ-90B22-14

28 VDC/VAC

A3PJ-90A21-28 A3PJ-90A22-28 A3PJ-90B21-28 A3PJ-90B22-28

DPDT

LED 24 VDC A3PJ-90C21-24E(1)(2) A3PJ-90C22-24E(1)(2) A3PJ-90D21-24E(1)(2) A3PJ-90D22-24E(1)(2) R O G W

Incandescent

lamp

6 VDC/VAC A3PJ-90C21-06 A3PJ-90C22-06 A3PJ-90D21-06 A3PJ-90D22-06

14 VDC/VAC

A3PJ-90C21-14 A3PJ-90C22-14 A3PJ-90D21-14 A3PJ-90D22-14

28 VDC/VAC

A3PJ-90C21-28 A3PJ-90C22-28 A3PJ-90D21-28 A3PJ-90D22-28

Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting)

Case color Black Light gray

Output Lighting

SPDT

LED 5 VDC A3PJ-90E21-24E(1)(2) A3PJ-90E22-24E(1)(2) R O G W

Incandescent

lamp

6 VDC/VAC A3PJ-90E21-06 A3PJ-90E22-06

14 VDC/VAC

A3PJ-90E21-14 A3PJ-90E22-14

28 VDC/VAC

A3PJ-90E21-28 A3PJ-90E22-28

DPDT

LED 5 VDC A3PJ-90G21-24E(1)(2) A3PJ-90G22-24E(1)(2) R O G W

Incandescent

lamp

6 VDC/VAC A3PJ-90G21-06 A3PJ-90G22-06

14 VDC/VAC

A3PJ-90G21-14 A3PJ-90G22-14

28 VDC/VAC

A3PJ-90G21-28 A3PJ-90G22-28

(Horizontal 2-split Screen) (Horizontal 2-split Screen)

A3PJ

(1)

(2)

Rectangular

Models

Example: Red

White

Upper A3PJ-90D21-24E R W

Lower Red

White

(Horizontal 2-split Screen) (Horizontal 2-split Screen)

A3PJ

(1)

(2)

Rectangular

Models

Example: Red

White

Upper A3PJ-90D21-24E R W

Lower Red

White

Individual models: Refer to pages 9 to 12.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises

the Pushbutton, Lamp, and Switch.

(Not all combinations are possible. Ask your OMRON representative for details.)

Standard Loads

Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PA-90A11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.

Microloads

Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PA-90E11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 20 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination.

Contact type Standard load (250 VAC, 3 A; 30 VDC, 4 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting) Alternate operation (Self-holding)

Case color Black Light gray Black Light gray

Output Lighting

SPDT

LED

5 VDC A3PA-90A11-05E(1) A3PA-90A12-05E(1) A3PA-90B11-05E(1) A3PA-90B12-05E(1) R

12 VDC A3PA-90A11-12E(1) A3PA-90A12-12E(1) A3PA-90B11-12E(1) A3PA-90B12-12E(1)

24 VDC A3PA-90A11-24E(1) A3PA-90A12-24E(1) A3PA-90B11-24E(1) A3PA-90B12-24E(1)

Chameleon 12 VDC A3PA-90AG1-12EK A3PA-90AG2-12EK A3PA-90BG1-12EK A3PA-90BG2-12EK *1

24 VDC A3PA-90AG1-24EK A3PA-90AG2-24EK A3PA-90BG1-24EK A3PA-90BG2-24EK

Incandescent

lamp

6 VDC/VAC A3PA-90A11-06 A3PA-90A12-06 A3PA-90B11-06 A3PA-90B12-06

14 VDC/VAC A3PA-90A11-14 A3PA-90A12-14 A3PA-90B11-14 A3PA-90B12-14

28 VDC/VAC A3PA-90A11-28 A3PA-90A12-28 A3PA-90B11-28 A3PA-90B12-28

DPDT

LED

5 VDC A3PA-90C11-05E(1) A3PA-90C12-05E(1) A3PA-90D11-05E(1) A3PA-90D12-05E(1) R

12 VDC A3PA-90C11-12E(1) A3PA-90C12-12E(1) A3PA-90D11-12E(1) A3PA-90D12-12E(1)

24 VDC A3PA-90C11-24E(1) A3PA-90C12-24E(1) A3PA-90D11-24E(1) A3PA-90D12-24E(1)

Chameleon 12 VDC A3PA-90CG1-12EK A3PA-90CG2-12EK A3PA-90DG1-12EK A3PA-90DG2-12EK *1

24 VDC A3PA-90CG1-24EK A3PA-90CG2-24EK A3PA-90DG1-24EK A3PA-90DG2-24EK

Incandescent

lamp

6 VDC/VAC A3PA-90C11-06 A3PA-90C12-06 A3PA-90D11-06 A3PA-90D12-06

14 VDC/VAC A3PA-90C11-14 A3PA-90C12-14 A3PA-90D11-14 A3PA-90D12-14

28 VDC/VAC A3PA-90C11-28 A3PA-90C12-28 A3PA-90D11-28 A3PA-90D12-28

Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting)

Case color Black Light gray

Output Lighting

SPDT

LED

5 VDC A3PA-90E11-05E(1) A3PA-90E12-05E(1) R

12 VDC A3PA-90E11-12E(1) A3PA-90E12-12E(1)

24 VDC A3PA-90E11-24E(1) A3PA-90E12-24E(1)

Chameleon 12 VDC A3PA-90EG1-12EK --- *1

24 VDC A3PA-90EG1-24EK A3PA-90EG2-24EK

Incandescent

lamp

6 VDC/VAC A3PA-90E11-06 A3PA-90E12-06

14 VDC/VAC --- A3PA-90E12-14

28 VDC/VAC A3PA-90E11-28 A3PA-90E12-28

DPDT

LED

5 VDC --- --- R

12 VDC A3PA-90G11-12E(1) A3PA-90G12-12E(1)

24 VDC A3PA-90G11-24E(1) A3PA-90G12-24E(1)

Chameleon 12 VDC A3PA-90GG1-12EK --- *1

24 VDC A3PA-90GG1-24EK

Incandescent

lamp

6 VDC/VAC A3PA-90G11-06 A3PA-90G12-06

14 VDC/VAC --- ---

28 VDC/VAC A3PA-90G11-28 A3PA-90G12-28

(Single Screen) (Single Screen)

A3PA

(1)

Square

Models

Individual models: Refer to pages 9 to 12.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises

the Pushbutton, Lamp, and Switch.

(Not all combinations are possible. Ask your OMRON representative for details.)

Standard Loads

Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use

the appropriate combination.

Microloads

Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use

the appropriate combination.

Contact type Standard load (250 VAC, 3 A; 30 VDC, 4 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting) Alternate operation (Self-holding)

Case color Black Light gray Black Light gray

Output Lighting

SPDT

LED 24 VDC

A3PA-90A21-24E(1)(2) A3PA-90A22-24E(1)(2)

A3PA-90B21-24E

(1)(2) A3PA-90B22-24E(1)(2)

R O G W

Incandescent lamp

6 VDC/VAC A3PA-90A21-06 A3PA-90A22-06 A3PA-90B21-06 A3PA-90B22-06

14 VDC/VAC A3PA-90A21-14 A3PA-90A22-14 A3PA-90B21-14 A3PA-90B22-14

28 VDC/VAC A3PA-90A21-28 A3PA-90A22-28 A3PA-90B21-28 A3PA-90B22-28

DPDT

LED 24 VDC

A3PA-90C21-24E

(1)(2) A3PA-90C22-24E(1)(2)

A3PA-90D21-24E

(1)(2) A3PA-90D22-24E(1)(2)

R O G W

Incandescent lamp

6 VDC/VAC A3PA-90C21-06 A3PA-90C22-06 A3PA-90D21-06 A3PA-90D22-06

14 VDC/VAC A3PA-90C21-14 A3PA-90C22-14 A3PA-90D21-14 A3PA-90D22-14

28 VDC/VAC A3PA-90C21-28 A3PA-90C22-28 A3PA-90D21-28 A3PA-90D22-28

Contact type Microload (125 VAC, 0.1 A; 30 VDC, 0.1 A)

Pushbutton

color symbol

Operation Momentary operation (Self-resetting)

Case color Black Light gray

Output Lighting

SPDT

LED 24 VDC

A3PA-90E21-24E(1)(2)

A3PA-90E22-24E

(1)(2)

R O G W

Incandescent lamp

6 VDC/VAC A3PA-90E21-06 A3PA-90E22-06

14 VDC/VAC A3PA-90E21-14 A3PA-90E22-14

28 VDC/VAC A3PA-90E21-28 A3PA-90E22-28

DPDT

LED 24 VDC

A3PA-90G21-24E(1)(2) A3PA-90G22-24E(1)(2)

R O G W

Incandescent lamp

6 VDC/VAC A3PA-90G21-06 A3PA-90G22-06

14 VDC/VAC A3PA-90G21-14 A3PA-90G22-14

28 VDC/VAC A3PA-90G21-28 A3PA-90G22-28

(Horizontal 2-split Screen) (Horizontal 2-split Screen)

A3PA

(1)

(2)

Square

Models

Example: Red

White

Upper A3PA-90D21-24E R W

Lower Red

White

(Horizontal 2-split Screen) (Horizontal 2-split Screen)

A3PA

(1)

(2)

Square

Models

Example: Red

White

Upper A3PA-90D21-24E R W

Lower Red

White

Individual models: Refer to pages 9 to 12.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises

the Pushbutton, Lamp, and Switch.

Standard Loads

Note: Enter the desired color symbols for the Pushbutton in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PT-90A12-24C R

* Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT (round models), however,

are not supplied with legend plates.

Microloads

Note: Enter the desired color symbols for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red A3PT-90E12-24C R

* Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT (round models), however,

are not supplied with legend plates.

Contact type Standard load (250 VAC, 3 A; 30 VDC, 4 A)

Pushbutton

color symbol

Operation Momentary operation

(Self-resetting)

Alternate operation

(Self-holding)

Case color Light gray Light gray

Output Lighting

SPDT

LED 24 VDC A3PT-90A12-24C(1) A3PT-90B12-24C(1) R O G W

Incandescent lamp

6 VDC/VAC A3PT-90A12-06 A3PT-90B12-06

14 VDC/VAC A3PT-90A12-14 ---

28 VDC/VAC A3PT-90A12-28 A3PT-90B12-28

DPDT

LED 24 VDC A3PT-90C12-24C(1) A3PT-90D12-24C(1) R O G W

Incandescent lamp

6 VDC/VAC A3PT-90C12-06 A3PT-90D12-06

14 VDC/VAC A3PT-90C12-14 A3PT-90D12-14

28 VDC/VAC A3PT-90C12-28 A3PT-90D12-28

Contact type

Microload

(125 VAC, 0.1 A; 30 VDC, 0.1 A)

Pushbutton

color symbol

Operation Momentary operation

(Self-resetting)

Case color Light gray

Output Lighting

SPDT LED 24 VDC A3PT-90E12-24C(1) R O G W

Incandescent lamp 28 VDC/VAC A3PT-90E12-28 *

DPDT LED 24 VDC A3PT-90G12-24C(1) G W

Incandescent lamp 28 VDC/VAC A3PT-90G12-28 *

Round (Single Screen) (Single Screen)

A3PT

(1)

Round (Single Screen) (Single Screen)

A3PT

(1)

Individual models: Refer to pages 9 to 12.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Illumination-only and Colored-illumination LED Models

“Illumination only” describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter

when the LED lights.

Example: Red LED

“Colored illumination” describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp

when the LED is lit.

Example: Red LED

Ordering: With colored-illumination models, order the Pushbutton, Lamp, and Switch as shown in the following table.

Pushbutton Lamp Switch

Select the LED lamp-lighted model required

from the selection on page 10. Each assembly

includes the number of white colored plates re-

quired to enable colored illumination for the

corresponding screen-split configuration. For

example, 4-split screen models include 4 white

colored plates.

Select the LED lamps to suit your desired col-

oration from the selection on page 12. Number

of necessary LED lamps (standard)

A3PJ (rectangular): 4

A3PA (square): 2

A3PT (round): 2

Select from the Switches on page 12.

Legend plate (transparent)

Cap (transparent)

Red

Not lit

Colored plate (red)

Lamp

holder

LED lamp (red) - - - Lamp

Pushbutton

(Display)

Red

Lit

Legend plate (transparent)

Cap (transparent)

Colored plate (white)

Lamp

holder

LED lamp (red) - - - Lamp

Pushbutton

(Display)

White

Not lit

Red

Lit

A3P

Ordering Information

Ordering Individually ............... Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as

sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.

* The Switch is compatible with LED-lighted models, LED lamp-lighted models, and incandescent lamp-lighted models.

*1. Number of necessary LED lamps. *2. Number of necessary incandescent lamps.

LED-lighted/Chameleon Models

(LED is built into the Pushbutton.)

LED Lamp-lighted Models

(LED lamp and Pushbutton are separate.)

Incandescent Lamp-lighted Models

(Incandescent lamp and Pushbutton are separate.)

Pushbutton Pushbutton Pushbutton

Lamp (LED Lamp)*1Lamp (Incandescent Lamp)*2

Switch *Switch *Switch *

Round (A3PT) models not available.

A3P@-5@@@-@@E

· For Pushbutton Switch

Round (A3PT) models not available.

A3P@-5@@@-@@E

· For Pushbutton Switch

A3P@-502@

· For Pushbutton Switch

A3P@-501@

· For Pushbutton Switch

SLL-@@E@

· Standard lamp

SLL-@@

· Low-power lamp

SLL-@@H

Round (A3PT) models not available.

A3P@-7@@@-@

· For Pushbutton Switch

A3P@-7@@@-@

· For Pushbutton Switch

A3P@-7@@@-@

· For Pushbutton Switch

Screen pattern A3PJ A3PA A3PT

Single screen

Horizontal 2-split screen 2 ---

Vertical 2-split screen

Vertical 3-split screen

Horizontal 3-split screen

4-split screen

Screen pattern A3PJ A3PA A3PT

Single screen 2 1 2

Horizontal 2-split screen

(low-power

incandes-

cent lamp)

2 ---

Vertical 2-split screen

Vertical 3-split screen

Horizontal 3-split screen

4-split screen

Ordering set combinations: Refer to page 3 to 7. ■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering Individually................Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as

sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.

LED-lighted Models (LED is built-in.)

Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are built into the standard lighting unit.

2. Split-screen coloring configurations are given with the OMRON mark on the Switch facing down.

3. The LED is built-in and cannot be replaced individually.

LED Lamp-lighted Models (LED is not built-in.)

Pushbutton

Appearance Split-screen color

(color symbol) White (W) Red (R) Green (G) Orange (O) Selection precau-

tions

Rectangular

models

Single screen A3PJ-5701

@@E

A3PJ-5702

@@E

A3PJ-5703

@@E

A3PJ-5706

@@E• Enter the voltage to

be used in the@@at

the end of the mod-

el number.

Examples of voltag-

es used:

5V=@0 @5 E

12V=@1 @2 E

24V=@2 @4 E

Horizontal 2-split

screen models sup-

port only 24V.

• For the color of the

shaded part, select

the model accord-

ing to the colors

given at the top of

the table.

Horizontal

2-split screen

A3PJ-5711

@@E

A3PJ-5712

@@E

A3PJ-5713

@@E

A3PJ-5716

@@E

A3PJ-5721

@@E

A3PJ-5722

@@E

A3PJ-5723

@@E

A3PJ-5726

@@E

A3PJ-5731

@@E

A3PJ-5732

@@E

A3PJ-5733

@@E

A3PJ-5736

@@E

A3PJ-5741

@@E

A3PJ-5742

@@E

A3PJ-5743

@@E

A3PJ-5746

@@E

Square models

Single screen A3PA-5701

@@E

A3PA-5702

@@E

A3PA-5703

@@E

A3PA-5706

@@E

Horizontal

2-split screen

A3PA-5711

@@E

A3PA-5712

@@E

A3PA-5713

@@E

A3PA-5716

@@E

A3PA-5721

@@E

A3PA-5722

@@E

A3PA-5723

@@E

A3PA-5726

@@E

A3PA-5731

@@E

A3PA-5732

@@E

A3PA-5733

@@E

A3PA-5736

@@E

A3PA-5741

@@E

A3PA-5742

@@E

A3PA-5743

@@E

A3PA-5746

@@E

Appearance

Rectangular models Square models Round models

Selection precautions

Screen pattern Screen Model Screen Model Screen Model

Single screen

A3PJ-5021 A3PA-5021 A3PT-5021

• Parts included:

Colored plates (white, red, green, and or-

ange), a legend plate (transparent), and a

light baffle (split-screen models only) are in-

cluded. Use the appropriate combination for

the LED coloring required.

• The number of white colored plates required

to enable colored illumination for the corre-

sponding screen-split configuration is includ-

ed. (For example, 4-split screen models

include 4 white colored plates).

• The number of colored plates included for each

model are shown in the following table.

Horizontal

2- split screen

A3PJ-5022 A3PA-5022

---

Vertical 2-split

screen

A3PJ-5023

--- ---

Horizontal 3-split

screen

A3PJ-5024

--- ---

Vertical 3-split

screen

A3PJ-5025

--- ---

4-split screen

A3PJ-5026

--- ---

White

Red

Green

Orange

White

Red

Green

Orange

Screen pattern

White

Red

Green

Orange

Single screen 1111

Horizontal 2-

split screens

Vertical 2-split

screens

2111

Horizontal 3-

split screens

Vertical 3-split

screens

3222

4-split screen 4111

Ordering set combinations: Refer to page 3 to 7. ■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering Individually ............... Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available as

sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.

Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.)

Chameleon Models (with Built-in LED)

Note: 1. With chameleon models the whole screen lights red, green, or orange

(i.e., red and green simultaneously).

2. A cap, legend plate (transparent), white colored plate, and LED (with a

current-limiting resistor) are built into the Pushbutton.

Pushbutton

Appearance

Rectangular models Square models Round models

Selection precautions

Screen pattern Screen Model Screen Model Screen Model

Single screen

A3PJ-5011 A3PA-5011

A3PT-5011

• Parts included:

Colored plates (white, red, green, orange, and

blue), legend plates (transparent and milk white),

and a light baffle (split-screen models only) are

supplied.

* A3PT (round) models do not contain a legend plate.

• The number of colored plates included is shown in

the following table.

Horizontal 2-

split screen

A3PJ-5012 A3PA-5012

---

Vertical 2-split

screen

A3PJ-5013

--- ---

Horizontal 3-split

screen

A3PJ-5014

--- ---

Vertical 3-split

screen

A3PJ-5015

--- ---

4-split screen

A3PJ-5016

--- ---

Screen pattern

White

Red

Green

Orange

Blue

Single screen 11111

Horizontal 2-

split screens

Vertical 2-split

screens

11111

Horizontal 3-

split screens

Vertical 3-split

screens

22222

4-split screen 22222

Appearance Rated voltage Chameleon pushbutton

switch

Rectangular 12 VDC A3PJ-5800-12E

24 VDC A3PJ-5800-24E

Square 12 VDC A3PA-5800-12E

24 VDC A3PA-5800-24E

Ordering set combinations: Refer to page 3 to 7. ■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Ordering Individually..........................Pushbuttons, Lamps, and Switches can be ordered separately. Combinations that are not available

as sets can be created using individual Units. Also, store the parts as spares for maintenance and

repairs.

LED Lamp

Incandescent Lamp

Pushbutton (For information on mounting, refer to page 25.)

Voltage 5 VDC 12 VDC 24 VDC

Applicable cap (color)

(colored plate) Selection precautions

Color Model (DC only) Model (DC only) Model (DC only)

Red SLL-05ER SLL-12ER SLL-24ER Red

In the standard setup, 4 LED lamps are used

with A3PJ models and 2 LED lamps are

used with A3PA and A3PT models.

Yellow SLL-05EY SLL-12EY SLL-24EY Orange

Green SLL-05EG SLL-12EG SLL-24EG Green

White SLL-05EW SLL-12EW SLL-24EW White

Lamp type Standard lamp Low-power lamp Selection precautions

Voltage

5 VAC/VDC SLL-06 SLL-06H • In the standard setup for A3PJ models, 2 lamps are used with sin-

gle screen models, and 4 lamps are used with split-screen models.

If 3 or 4 lamps are lit continuously, use low-power lamps.

• In the standard setup for A3PA models, 1 lamp is used with single

screen models, and 2 lamps are used with split-screen models.

• In the standard setup for A3PT models, 2 lamps are used.

12 VAC/VDC SLL-14 SLL-14H

24 VAC/VDC SLL-28 SLL-28H

Switch (common to both incandescent lamp-lighted models and LED models)

Appearance

Rectangular models

Square models Round models

Selection precautions

Contact

type

Switch

Number of

outputs Operation

Model Model Model

Standard load

Silver alloy

contact

Momentary operation A3PJ-7010-1 A3PA-7010-1 A3PT-7010-2 • The end digit denotes the

color of the flange: -1

denotes a black flange,

and -2 denotes a light

gray flange. Round

switches are available

only in light gray, and not

in black.

• Use the Switch in combi-

nation with the same

shape Lamp (rectangu-

lar, square or round).

Example: For rectangular

Lamp A3PJ-5011, select

Switch A3PJ-7@@0-@.

On the Switch itself, how-

ever, only 3 digits are

shown, as follows:

A3PJ-7@@.

• Momentary operation is

self-resetting, and alter-

nate operation is self-

holding (i.e., push-on,

push-off).

Alternate operation A3PJ-7020-1 A3PA-7020-1 A3PT-7020-2

Momentary operation A3PJ-7030-1 A3PA-7030-1 A3PT-7030-2

Alternate operation A3PJ-7040-1 A3PA-7040-1 A3PT-7040-2

Momentary operation A3PJ-7150-1 --- ---

Alternate operation A3PJ-7160-1 --- ---

Microload

Gold alloy

contact

Momentary operation A3PJ-7050-1 A3PA-7050-1 A3PT-7050-2

Alternate operation A3PJ-7060-1 A3PA-7060-1 A3PT-7060-2

Momentary operation A3PJ-7070-1 A3PA-7070-1 A3PT-7070-2

Alternate operation A3PJ-7080-1 A3PA-7080-1 A3PT-7080-2

Momentary operation A3PJ-7170-1 --- ---

Alternate operation A3PJ-7180-1 --- ---

Ordering set combinations: Refer to page 3 to 7. ■ Specifications: Refer to page 15

■ Dimensions: Refer to page 18

■ Accessories: Refer to pages 13 to 15.

A3P

Ordering Information

Accessories, Replacements, and Tools

Accessories

Name Appearance Classification Rectangular Square Application precautions

Socket

Wire-wrap terminal A3PJ-4101 A3PA-4101 • The Socket cannot be used

with when mounting multi-

ple Switches or with 3C

models.

PCB terminal A3PJ-4102 A3PA-4102

Solder terminal A3PJ-4103 A3PA-4103

Barrier

Short edge

barrier (Hori-

zontal mount-

ing) (1 pair)

Black A3PJ-4001 A3PA-4001

• The purpose of the barrier

is to prevent malfunction-

ing and to improve design

image of the mounting

panel.

• Intermediate barrier × 1.

• Edge barriers × 1 pair (2

Units).

• Mount short barriers hori-

zontally.

• Mount long barriers verti-

cally.

• For details on mounting, re-

fer to page 25.

Light gray A3PJ-4002 A3PA-4002

Long edge

barrier (Verti-

cal mounting)

(1 pair)

Black A3PJ-4004

---

Light gray A3PJ-4005

Short inter-

mediate barri-

er (Horizontal

mounting)

Black A3PJ-4007 A3PA-4007

Light gray A3PJ-4008 A3PA-4008

Long interme-

diate barrier

(Vertical

mounting)

Black A3PJ-4010

---

Light gray A3PJ-4011

Switch guard

For horizontal mounting (with

OMRON logo facing down)

A3PJN-5050 A3PAN-5050

• Can be used by exchang-

ing with the cap.

• Cannot be used with seal

cover.

• Can be used with barrier.

• Use horizontal mounting

guard for consecutive hori-

zontal mounting, and use

vertical mounting guard for

consecutive vertical

mounting.

For vertical mounting (with

OMRON logo facing to the

right)

A3PJN-5055 A3PAN-5055

Seal cover --- A3PJ-5060 A3PA-5060

• Cannot be used with barrier

and/or switch guard.

• For details on mounting, re-

fer to page 25.

• Cap is manufactured from

vinyl chloride.

Long mounting

plate --- A3PJ-3002 ---

• Use when vertically mount-

ing individual (with barrier)

or multiple Switches (in

standard mounting style

and with barrier). Since a

short mounting plate is at-

tached to the Switch, re-

place it with the long one.

A3P

Ordering Information

Accessories

Name Appearances Classification A3PJ A3PA Application precautions

Colored plate

for incandes-

cent lamp

Single screen

White A3PJ-5101 A3PA-5101

• Keep mounted at all times.

• Contact your OMRON repre-

sentative for color changes

or other specifications.

• For details on mounting, refer

to page 25.

Red A3PJ-5102 A3PA-5102

Green A3PJ-5103 A3PA-5103

Blue A3PJ-5104 A3PA-5104

Yellow A3PJ-5105 A3PA-5105

Orange A3PJ-5106 A3PA-5106

Horizontal 2-

split screen

White A3PJ-5121 A3PA-5121

Red A3PJ-5122 A3PA-5122

Green A3PJ-5123 A3PA-5123

Blue A3PJ-5124 A3PA-5124

Yellow A3PJ-5125 A3PA-5125

Orange A3PJ-5126 A3PA-5126

Vertical 2-split

screen

White A3PJ-5131 ---

Red A3PJ-5132 ---

Green A3PJ-5133 ---

Blue A3PJ-5134 ---

Yellow --- ---

Orange A3PJ-5136 ---

4-split screen

White A3PJ-5161 ---

Red A3PJ-5162 ---

Green A3PJ-5163 ---

Blue --- ---

Yellow A3PJ-5165 ---

Orange A3PJ-5166 ---

Colored plate

for LED

Single screen White A3PJ-5301 A3PA-5301

• Keep mounted at all times.

If the colored plate is lost or

damaged, contact OMRON.

• Use in accordance with color-

ing of the built-in LED.

• For details on mounting, refer

to page 25.

Red A3PJ-5302 A3PA-5302

Green A3PJ-5303 A3PA-5303

Yellow A3PJ-5305 A3PA-5305

Orange A3PJ-5306 A3PA-5306

Horizontal 2-

split screen

White A3PJ-5321 A3PA-5321

Red A3PJ-5322 A3PA-5322

Green A3PJ-5323 A3PA-5323

Yellow A3PJ-5325 A3PA-5325

Orange A3PJ-5326 A3PA-5326

Vertical 2-split

screen

White A3PJ-5331 ---

Red A3PJ-5332 ---

Green A3PJ-5333 ---

Yellow A3PJ-5335 ---

Orange A3PJ-5336 ---

4-split screen White A3PJ-5361 ---

Red A3PJ-5362 ---

Green A3PJ-5363 ---

Yellow A3PJ-5365 ---

Orange A3PJ-5366 ---

Light baffle

Horizontal 2-split screen A3PJ-4302 A3PA-4302

• Keep mounted at all times.

If the light baffle is lost, con-

tact OMRON.

• Used in LED lamp-lighted

models. Cannot be used in

LED-lighted models.

Vertical 2-split screen A3PJ-4303 ---

Horizontal 3-

split screen

Long axis A3PJ-4304 ---

Short axis A3PJ-4305 ---

Vertical 3-split

screen

Long axis A3PJ-4306 ---

Short axis A3PJ-4307 ---

4-split screen Long axis A3PJ-4304 ---

Short axis A3PJ-4308 ---

Legend plate

Transparent legend plate A3PJ-5202 A3PA-5202 • A transparent legend plate is

mounted on the Pushbutton.

Milk-white legend plate A3PJ-5201 A3PA-5201

Cap

Transparent cap A3PJ-5600 A3PA-5600 ---

Crimp-processed transpar-

ent cap A3PJ-5600-A A3PA-5600-A

• The surface is crimp-pro-

cessed, so there is no reflec-

tion.

A3P

Ordering Information

Tools

Specifications

Approved Standard Ratings

UL (File No. E41515), CSA (File No. LR45258)

Standard Load: 5 A at 125 VAC

3 A at 250 VAC

Microload: 0.1 A at 125 VAC

0.1 A at 30 VDC

Note: Certification has been obtained for the Switch Unit.

For detailed information on individual products that have received

certification, consult your supplier.

CCC (GB14048.5)

Standard Load: 3 A at 250 VAC

4 A at 30 VDC

Microload: 0.1 A at 125 VAC

0.1 A at 30 VDC

Ratings

Contact Ratings

Silver Alloy Contacts (for Standard Loads)

Note: 1. The above values are for steady-state currents.

2. Inductive load: Power factor = 0.4; time constant = 7 ms.

3. The lamp load has an inrush current of 10 times the steady-state current.

4. The motor load has an inrush current of 6 times the steady-state current.

Standard testing condition

(1) Ambient temperature: 20 ± 2°C

(2) Ambient humidity: 65 ± 5%RH

(3) Operating frequency: 20 times/min.

Gold Alloy Contacts (for Microloads)

LED and Incandescent Lamp Ratings

LED for LED-lighted Models

LED for Chameleon Models

Incandescent Lamp

LED Lamp (for LED Lamp-lighted Models)

Characteristics

*1. With alternate operation models, 60 operations/minute max. One operation

cycle consists of set and reset operations.

*2. 600 VAC for microloads.

*3. With no incandescent lamp or LED lamp mounted.

Name Appearance Classification Model Application precautions

Extractor

--- A3PJ-5080 • Use to extract components when

replacing the Pushbutton.

Rated

voltage

(V)

Non-inductive load (A) Inductive load (A)

Resistive load Lamp load Inductive load Motor load

NC NO NC NO NC NO NC NO

125 VAC

250 VAC

0.7

0.5

1.3

0.8

8 VDC

14 VDC

30 VDC

125 VDC

250 VDC

0.4

0.2

0.05

0.03

0.4

0.2

0.05

0.03

Rated voltage (V) 0.1 A at 30 VDC (resistive load);

0.1 A at 125 VAC (resistive load)

Minimum applicable load 1 mA at 5 VDC

Model A3PJ/M2PJ

A3PA/M2PA

Rated current Rated current

Applied

voltage

Rated

voltage

Single

screen

2-split

screen

Single

screen

2-split

screen

5 VDC±5% 5 VDC 80 mA --- 80 mA ---

12 VDC±5% 12 VDC 40 mA --- 40 mA ---

24 VDC±5% 24 VDC 20 mA 15 mA × 2 20 mA 13 mA × 2

Applied voltage Rated voltage Rated current

Green Red

12 VDC±5% 12 VDC 26 mA 20 mA

24 VDC±5% 24 VDC 13 mA 10 mA

Item Standard lamp Low-power lamp

Applied voltage Rated voltage Rated current

Model

Rated current

Model

5 VDC

6 V 200 mA SLL-06 100 mA

SLL-06H

12 VDC

14 V 80 mA SLL-14 40 mA

SLL-14H

24 VDC

28 V 40 mA SLL-28 25 mA

SLL-28H

Type

Applied voltage

Rated voltage Rated current

Model

DC only

5 VDC±5% 5 VDC 30 mA SLL-05E@

12 VDC±5% 12 VDC 15 mA SLL-12E@

24 VDC±5% 24 VDC 12.5 mA SLL-24E@

Operating frequency Mechanical 120 operations/minute max. *1

Electrical 30 operations/minute max.

Insulation resistance 100 MΩ min. (at 500 VDC)

Dielectric

strength

Between terminals of same polarity

1,000 VAC, 50/60 Hz for 1 minute

Between terminals of different polarity

2,000 VAC, 50/60 Hz for 1 minute

Between current-carrying metal part and

ground

2,000 VAC, 50/60 Hz for 1 minute

Between each terminal and

non-current-carrying metal part

2,000 VAC, 50/60 Hz for 1 minute

Between lamp terminals

1,000 VAC, 50/60 Hz for 1 minute *3

Vibration resistance Malfunction

10 to 55 Hz, 1.5 mm double amplitude

Shock resistance Destruction 500 m/s2

Malfunction 200 m/s2

Life expectancy Mechanical

Momentary operation models:

1,000,000 operations min.

Alternate operation models:

200,000 operations min.

(One operation consists of set and

reset operations.)

Electrical 100,000 operations min.

Weight Approx. 30 g

Inrush current

Silver contact: 10 A max.

Ambient operating temperature

LED-lighted models:

−

C to 40

(with no icing or condensation)

Incandescent lamp-lighted models:

−

C to 50

(with no icing or condensation)

Ambient operating humidity 35% to 85%RH

Ambient storage temperature −25°C to 65°C

Degree of protection IP40

Electric shock protection class Class II

PTI (proof tracking index) 175

Pollution degree 3 (IEC947-5-1)

A3P

Specifications

Operating Characteristics

Nomenclature

Model Structure

Model A3PJ series A3PA series A3PT series

Operating

Characteristics

Momentary

operation models

Alternate

operation models

Momentary

operation models

Alternate

operation models

Momentary

operation models

Alternate

operation models

Operating force OF max. 5.88 N 6.86 N 5.88 N 6.86 N 3.92 N 4.90 N

Releasing force RF min. 0.39 N 0.29 N 0.39 N 0.29 N 0.39 N 0.29 N

Total travel TT Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm Approx. 3.5 mm

Pretravel PT max. 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm

Lock travel alternate LTA min. --- 0.5 mm --- 0.5 mm --- 0.5 mm

Lighting

method

LED-lighted models

(LED is built-in.)

LED lamp-lighted models

(LED lamp is not built-in.)

Incandescent lamp-lighted models

(Incandescent lamp is not built-in.)

Models A3PJ

A3PA

A3PJ

A3PA A3PT

A3PJ

A3PA A3PT

Screen

patterns

Single

screen

Horizontal 2-spli

screen

Chameleon

(3-color)

Single

screen

Chameleon

(3-color)

Horizontal 2-spli

screen

Single

screen

4-split screen

Horizontal 2-split

screen

Vertical 2-split

screen

Vertical 3-split

screen

Horizontal 3-split

screen

Single

screen

Horizontal 2-spli

screen

Single

screen

Single

screen

4-split screen

Horizontal 2-split

screen

Horizontal 3-split

screen

Vertical 3-split

screen

Vertical 2-split

screen

Single

screen

Horizontal 2-spli

screen

Single

screen

LED-lighted models

Cap

(transparent)

Legend plate

(transparent)

Colored

plate

LED Unit

Built-in LED

Chameleon models (full screen

illumination in one of three colors)

Cap

(transparent)

Legend plate

(transparent)

LED Unit

3-color emitter

Colored

plate

Cap

(transparent)

Legend plate *

(transparent)

Colored

plate

Lamp

holder

Pushbutton

Lamp

Switch

●Pushbutton colors

White, Red, Green, Orange

White, Red, Green, Blue,

Orange

* Incandescent lamp-lighted

A3PT models do not contain

a legend plate.

●

Switch Specifications

Standard load

· 250 VAC, 3 A

30 VDC, 4A

Microload

· 125 VAC, 0.1 A

30 VDC, 0.1 A

●Case Color

Select either black or light

gray to suit your panel design.

(The round A3PT

models are available in

light gray only.)

(Split-screen models

contain a light

baffle.)

· Incandescent lamp-lighted model

LED-lighted models and

LED lamp-lighted models

Minimum applicable load: 5 VDC, 1 mA

LED-lighted models LED lamp-lighted models Incandescent lamp-lighted models

A3P

Nomenclature

A3P Lighting Method Diagram

A3PJ

(rectangular)

LED

models

LED

lamp-lighted

models

Incandescent lamplighted

models

LED-lighted

models

LED

lamp-lighted

models

LED

lamp-lighted

models

Incandescent lamplighted

models

Incandescent lamplighted

models

Chameleon

models

LED

models

LED

models

LED-lighted

models

Chameleon

models

A3PA

(square)

A3PT

(round)

Horizontal 2-split

screen models

Horizontal 2-split

screen models

Vertical 2-split

screen models

Single screen

models

Single screen

models

Single screen

models

Single screen

models

Horizontal 2-split

screen models

Vertical 2-split

screen models*

Vertical 3-split

screen models*

Horizontal 3-split

screen models*

Single screen

models

Horizontal 2-split

screen models

Single screen

models

Single screen

models

Horizontal 2-split

screen models

Single screen

models

Single screen

models

Single screen

models

Horizontal 2-split

screen models

4-split screen

models*

Horizontal 3-split

screen models

4-split screenVertical 3-split

screen models

(Full screen illumination

in one of three colors)

The following diagram shows

the Switches with the mark facing down.

•

As a set: See pa

ge 3.

•Individually: See page 9.

(Not available as a set.)

•

As a set: See page 3.

•

Individually: See page 9.

•

As a set: See pa

ge 3.

•

Individually: See page 9.

*Models indicated with an asterisk are only

available individually.

•

As a set: See page 5.

•

Individually: See page 9.

•

Individually: See

page 9.

(Not available as a set.)

•

As a set: See page 5.

•

Individually: See page 9.

•

As a set: See page 5.

•

Individually: See page 9.

•

As a set: See page 7.

•

Individually: See page 9.

•

As a set: See page 7.

•

Individually: See page 9.

A3P

Dimensions The Dimension shows 2-switch outputs. (Unit: mm)

Note: The thickness of tab terminals #110 and solder terminals is 0.5 mm.

A3PJ (Rectangular) Models A3PA (Square) Models

A3PT (Round) Models

2.8

0.5

#110 quick connect terminal/

solder terminal

OMRON logo

26.1 29.9±

0.2

25±0.1

32±0.1

18.9

6.7 43.6

52 max.

52.6

Separator

22.9±

0.2

OMRON logo #110 quick connect terminal/

solder terminal

43.6

22.9±0.2

6.7

52 max.

52.6

19.1 × 19.1

Separator

25±0.1

22.4 28.5 dia.

OMRON logo

23.8

43.6

32 dia.

24.9 dia.

6.4

52 max.

52.6

#110 quick connect terminal/solder terminal

A3P

Dimensions (Unit: mm)

Terminal connections

LED-lighted Models

(The terminal arrangement diagram shows a 1-switch output. Connections to terminals from the lighting block are the same for 2 outputs.)

Rated voltage

5 VDC 12 VDC 24 VDC

Model

Screen

pattern

A3PJ

Single screen

Horizontal

2-split screen

A3PA

Single screen

2-split screen

NO1

NC1

C1 LC+

Bottom view

Terminal

arran

ement

Lighting block

Top view

NO1

NC1

C1 LC+

Bottom view

Terminal

arran

ement

Lighting block

Top view

NO1

NC1

C1 LC+

Bottom view Top view

Terminal

arrangement

Lighting block

NO1

NC1

LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

NC1

C1 LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

NC1

LC+

Bottom view Top view

Lighting bloc

Terminal

arrangement

NC1

LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

NC1

LC+

Bottom view Top view

Lighting bloc

Terminal

arrangement

NO1

NC1

LC+

Bottom view Top view

Lighting bloc

Terminal

arrangement

NO1

NC1

LC+

Bottom view Top view

Lighting bloc

Terminal

arrangement

A3P

Dimensions (Unit: mm)

Incandescent Lamp-lighted/LED Lamp-lighted Models

(All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.)

LED Chameleon Models

(The terminal arrangement diagram shows a 1-switch output. Connections to terminals from the lighting block are the same for 2 outputs.)

Terminal Arrangement and Coloring

Chameleon Models

Model Rectangular A3PJ models Square A3PA models Round A3PT models

Type

Silver/gold alloy

contacts

(1 output)

Silver/gold alloy

contacts

(2 outputs)

Silver/gold alloy

contacts

(3 outputs)

--- ---

Rated voltage 24 VDC

Model

Rectangular

A3PJ model

Square A3PA

model

Wiring

LC+ LC+ LC+

L1−L2−L1− and L2−

shorted

Coloring Green Red Orange

NO1

NC1

C1 LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

LC+

NC1

Bottom view

Terminal

arrangement

Lighting bloc

Top view

NO1

LC+

NC1

Bottom view Top view

Lighting bloc

Terminal

arrangement

NO1

NC1

NO2

NC2

C2 LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

LC+

NC1

NO2

NC2

Bottom view

Terminal

arrangement

Lighting bloc

Top view

NO1 NO2

LC+

NC1 NC2

C1 C2

Bottom view

Terminal

arrangement

Lighting bloc

Top view

NO1

NC1

NO2 NO3

NC2 NC3

C2 C3 LC+

Bottom view Top view

Lighting blockTerminal

arrangement

NO1

NC1

L4−

L2−

L1−

LC+

L3−

NO1

LC+

NC1

L2−

L1−

A3P

Dimensions (Unit: mm)

Panel Cutout (If using a Switch Guard or Seal Cover, refer to the panel cutout diagrams on page 23.)

A3PJ (Rectangular) Models

Note: 1. n: Number of Units

2. Recommended panel thickness: 1 to 5 mm

3. Mount the panel before mounting the Switch Guard.

4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.

A3PA (Square) Models

Note: 1. n: Number of Units

2. Recommended panel thickness: 1 to 5 mm

3. Mount the panel before mounting the Switch Guard.

4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.

A3PT (Round) Models

Classification Mounting design

Panel cutout

Remarks

Flange

mount

models

Individual

mounting

(Horizontal)

Panel cutout spacing between rows of Units:

Multiple

mounting

(Horizontal)

Individual

mounting

(Vertical)

Mount to long

mounting plate

(A3PJ-3002)

before use.

Multiple

mounting

(Vertical)

Mount to long

mounting plate

(A3PJ-3002)

before use.

Barrier

mount

models

Individual

mounting

(Horizontal)

For barrier mount models, refer to Accessories on

page 13.

Panel cutout spacing between rows of Units:

(Dotted line indicates the position of each mounting

barrier.)

Multiple

mounting

(Horizontal)

Individual

mounting

(Horizontal)

Mount to long

mounting plate

(A3PJ-3002)

before use.

Multiple

mounting

(Vertical)

Mount to long

mounting plate

(A3PJ-3002)

before use.

Classification Mounting design

Panel cutout

Remarks

Flange

mount

models

Individual

mounting

Panel cutout spacing between rows of Units:

Multiple

mounting

Barrier

mount

models

Individual

mounting

Panel cutout spacing between rows of Units:

(Dotted line indicates the position of each mounting barrier.)

Multiple

mounting

32±0.1

25±0.1 30.5±0.3

23.5±0.3

3 min.

6 min.

32n±0.5

12 n

25±0.1

23.5±0.3

32n−1.5±0.3

25±0.1

32±0.1 23.5±0.3

30.5±0.3

32±0.1 12 n

25n±0.5 30.5±0.3

25n−1.5±0.3

36.4±0.3

23.5±0.3

6 min.

1.3

27 2

33n+6±1

23.5±0.3

32.9n+3.5±0.3

32±0.1

34 29.4±0.3

30.5±0.3

34 2

26n+6±130.5±0.3

25.9n+3.5±0.3

25±0.1

25±0.1 22.5±0.3

23.5±0.3

3 min.

6 min.

25n

±0.1

25±0.1 23.5±0.3

25n−2.5±0.3

27 23.5±0.3

27.8±0.3

6 min.

1.3

6 min.

1n2

26n+6.5

±1

23.5±0.3

26n+2.5±0.3

4 min.

6.4 dia.

29±0.3 dia.

+0.2

−0

11.8R

Note: 1. Recommended panel thickness: 1 to 5 mm

2. If the panel is to be finished (e.g., coated), make sure that the panel

meets the specified dimensions after the coating.

A3P

Dimensions (Unit: mm)

Accessory Mounting Dimensions

Socket-mounting Dimensions

Note: PCB cutout dimensions show the switch mounted to the socket with the OMRON logo facing down.

Legend Plate

Rectangular Models

A3PJ-5201/-5202

Square Models

A3PA-5201/-5202

Extractor

A3PJ-5080

Rectangular Models A3PJ (M2PJ) Square Models A3PA (M2PA)

25.1

16.9

1.5

1.2

Plate surface

17.2

1.5

2.5 2.5

25±2

0.3

Note: Made from stainless steel.

25.6

31.8

1 × 1 Wire-wrap Terminal

22.8

61.6 18.5±0.8

25.6

31.8

22.8

61.6

1.2 3

0.3

3.6

0.5

25.6

31.8

22.8

61.6

711.65

6.15 Eleven, 1.5-dia. holes

2.05

5.2

17.4 10.4 8.4

8.65

8.7

1.25

0.3

8.2

3.2

0.9R 0.6R

0.8

Wire-wrap Terminal

A3PJ-4101

PCB Terminal

A3PJ-4102

Solder Terminal

A3PJ-4103

Terminal Hole

Dimensions

PCB Cutout

(bottom view)

1 × 1 Wire-wrap Terminal

25.6

22.8

61.6 18.5±0.8

25.6

22.8

61.6

1.2 3

0.3

3.6

0.5

25.6

22.8

61.6

0.3

8.2

3.2

0.9R 0.6R

0.8

Nine, 1.5-dia. holes

10.5

8.8

1.5

3.5

10.2

17.6

5.25

20.45

Wire-wrap Terminal

A3PA-4101

PCB Terminal

A3PA-4102

Solder Terminal

A3PA-4103

Terminal Hole

Dimensions

PCB Cutout

(bottom view)

A3P

Dimensions (Unit: mm)

Switch and Guard Mounting Dimensions

Seal Cover Mounting Dimensions

Note: 1. Recommended panel thickness: 1 to 5 mm

2. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions.

43.6

52 max.

52.6

9.6

Switch Guard

(A3PJN-5050) OMRON logo

26.2±0.2

30.5±0.3

23.5±0.3

25.2

Spring

25±0.1

32±0.1

23.5±0.3

Panel Cutouts

Individual Mounting

(Horizontal)

Note: Multiple vertical mounting is not possible.

Multiple Mounting

(Horizontal)

n = Number of mountings

32n-1.5±0.3

Rectangular Models

A3PJN-5050 (Horizontal Mounting)

A3PJN-5055 (Vertical Mounting)

43.6

52 max.

52.6

9.6

Switch Guard

(A3AN-5050)

23.5±0.3

n = Number of mountings

22.5±0.3

23.5±0.3

Guard

OMRON logo

19.1

25.4

25±0.1

Spring

Panel Cutouts

Individual Mounting

(Horizontal)

Multiple Mounting

(Horizontal)

Note: Multiple vertical mounting is not possible.

25n-2.5±0.3

Square Models

A3PAN-5050 (Horizontal Mounting)

A3PAN-5055 (Vertical Mounting)

OMRON logo

39.5

32.5

42.99.3

51.3 max.

51.9

30.5±0.3

23.5±0.3

9.5 min.

Multiple Mounting

(Horizontal)

Panel Cutouts

Individual Mounting

(Horizontal)

9.5 min.

Cover B (black)Cover A (transparent)

Seal Cover

(A3PJ-5060)

30.5±0.3

23.5±0.3

Rectangular Models

A3PJ-5060 Cover B (black)Cover A (transparent)

OMRON logo

Seal cover

(A3PA-5060)

42.9

8.7

51.3 max.

51.9

23.5±0.3

22.5±0.3

22.5±0.3 10.5 min.

Multiple Mounting

Panel Cutouts

Individual Mounting

9.5 min.

32.5

23.5±0.3

Square Models

A3PA-5060

A3P

Safety Precautions

Refer to Safety Precautions for all Pushbutton Switches.

Do not apply a voltage higher than the maximum

rated operating voltage between the lamp

terminals, as there is a risk that the incandescent

lamp or LED will be damaged, and the Pushbutton

will be ejected.

When replacing the incandescent lamp, first turn

OFF the power supply, and then wait 10 minutes

before performing replacement, as the lamp is still

hot immediately after the power is turned OFF, so

there is a risk of burns.

1. Always make sure that the power is turned OFF before mounting,

removing, or wiring the Switch, or performing maintenance.

Electric shock or fire may occur.

2. After wiring the Switch, make sure that there is a suitable isolation

distance.

Wiring

•Solder quickly and correctly at 350°C max and for 3 s or less.

Wait for one minute after soldering before exerting any external

force on the solder.

Operating Environment

•Do not use in locations that are subject to dust, oil, or metal filings

as these may penetrate the interior of the Switch and cause

malfunction.

LED (for VDC)

•Check the terminal polarity when wiring.

•The rated voltage is shown on the plate on the back of the lighting

unit, so be sure to use within the voltage shown.

•An LED current-limiting resistor is built in, so there is no need to

mount an external resistor.

Incandescent Lamp

•Apply 80% of the rated voltage (operating voltage) to the

incandescent lamp to improve life expectancy and incandescence.

Character Plate (Character Film)

•If preparing the character plate separately, use a heat-resistant film

with a thickness of 0.1 to 0.3 mm.

Using Microloads

•Using a standard load switch when a microload circuit is opened or

closed may cause contact failure on the contacts. Use the switch

within the operating range. (Refer to the diagram below.) Even

when using microload models within the operating range shown

below, if inrush current occurs when the contact is opened or

closed, it may cause the contact surface to become rough, and so

decrease life expectancy. Therefore, insert a contact protection

circuit where necessary. The minimum applicable load is the N-

level reference value. This value indicates the malfunction

reference level for the reliability level of 60% (λ 60) (conforming to

JIS C5003). The equation, λ 60 = 0.5 x 10−4/time indicates that the

estimated malfunction rate is less than 1/2,000,000 with a reliability

level of 60%.

Others

•If the panel is to be finished (e.g., coated), make sure that the panel

meets the specified dimensions after the coating.

Caution

Precautions for Correct Use

17.1+0

−0.3

5.2+0

−0.3

24.1+0

−0.1 17.1+0

−0.3

17.1+0

−0.3

23.±0.1 dia.

24.8 dia.

−0.3

0.1 1 10 100 1,000

Standard

load area

1 mA 100 mA 150 mA

100 mA

26 mA0.15 mA

Invalid

area

Microload

area

Voltage (V)

Current

(

)

A3P

Assembly/Disassembly

A3PJ/M2PJ (Rectangular Models), A3PA/M2PA (Square Models)

Locking/Unlocking Positive Cap Lock Mechanism

Mounting Pushbutton

•Be sure to mount the Pushbutton with the correct orientation. Align

the groove on the Pushbutton, the projections in the Switch, and the

LED contact piece before pushing the Pushbutton into the Switch.

•When dismounting the Pushbutton, use the Extractor (A3PJ-5080)

for easy dismounting.

Removing/Mounting Cap

Insert the A3PA from the open side into the theft-prevention stopper.

Mounting Colored Plate

Place the colored plate on the plunger case with the dull side of the

colored plate facing downward.

With A3PJ split-screen models, be sure that the projections on the

upper surface of the colored plate face outward. For the A3PA, make

sure that the flat plate is facing upwards.

Mounting Character Plate (Character Frame) and Legend

Plate

Mount the legend plate for the A3PJ under the layered surfaces and

mount the cap, as shown below.

Mounting and Replacing LED and Incandescent Lamps

If using an A3PA (square) model with one incandescent lamp, insert

the lamp in the center hole.

LED Rated Voltage Display (LED Models Only)

The LED rated voltage is shown between the built-in resistors on the

back of the lighting unit. Use within a range of ± 5%.

Mounting Switch onto Panel

Mounting Barriers

Mount each part by pushing it in the direction of the arrow shown in

the corresponding illustration below.

Unlock Lock

Positive cap stoppe

OMRON logo Groove

LED contact piece

Diagram shows A3PA model.

Flat plate

A3PA

Projection

A3PJ

Transparent cap

Legend plate

Colored plate (Character plate

)

(Light baffle)

Note: Built-in LEDs cannot be re

laced.

Rated

voltage display

A3PA

A3PJ

Note: Display is on the back.

OMRON

logo

OMRON

logo

•Individual Mounting

and Barrier Mounting

When mounting the Switch,

push it into the panel cutout

from the front of the

mounting panel by holding it

with the logo mark

“OMRON” facing downward.

•Multiple Barrier Mounting (A3PJ)

When mounting a number of Switches in

line on the panel, link the Switches with

spacing barriers in between, attach

mounting barriers at both sides of this block

of Switches and, pushing in on the

mounting barriers at the side, insert the

Switches into the panel cutout together.

Barrier mounting

A3P

Mounting Seal Cover

After mounting the seal cover onto the flange of the Switch, push the

Switch into the panel cutout.

Inscribing the Legend Plate

•Inscribe the legend plate to a depth of 0.5 mm max.

•The legend plate is made from polycarbonate resin. To coat the

legend plate, use an alcohol-based coating such as melamine,

phthalic acid, or acrylic.

Maintenance Lock

1. First, when you insert the transparent lens while pressing the

center, the maintenance lock mechanism will be activated, and the

Switch will not operate. Lamp replacement and other maintenance

can be performed without turning OFF the power supply to devices

and equipment. Use an insertion force of 4 kg.

2. Next, when you remove your finger from the Switch, the lock will be

released.

3. The Switch will start to operate when the lighting unit is pressed the

second time.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2011.5

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 Omron:   
  A3PJ-5080  A3PA-4001  A3PA-4101  A3PA-4102  A3PA-4103  A3PA-5011  A3PA-5012  A3PA-5050  A3PA-5060 
A3PA-5101  A3PA-5106  A3PA-5121  A3PA-5201  A3PA-5202  A3PA-5600  A3PA-5701-06E  A3PA-5701-12E  A3PA-
5701-24E  A3PA-5702-05E  A3PA-5702-12E  A3PA-5702-24E  A3PA-5703-05E  A3PA-5703-24E  A3PA-5706-05E 
A3PA-5706-12E  A3PA-5706-24E  A3PA-5711-24E  A3PA-5712-O5E  A3PA-5713-24E  A3PA-5716-24E  A3PA-5723-
24E  A3PA-5731-24E  A3PA-5732-24E  A3PA-5733-24E  A3PA-5736-05E  A3PA-5736-12E  A3PA-5742-24E  A3PA-
5746-24E  A3PA-5803-24E  A3PA-7010-1  A3PA-7020-1  A3PA-7030-1  A3PA-7040-1  A3PA-7050-1  A3PA-7070-1 
A3PA-90A11-24EG  A3PA-90A11-24EO  A3PA-90A11-24ER  A3PA-90A11-24EW  A3PA-90A11-28  A3PA-90C12-28 
A3PA-90D11-06  A3PJ-3002  A3PJ-4002  A3PJ-4010  A3PJ-4102  A3PJ-4302  A3PJ-4305  A3PJ-4308  A3PJ-4501 
A3PJ-5016  A3PJ-5021  A3PJ-5022  A3PJ-5023  A3PJ-5055  A3PJ-5060  A3PJ-5101  A3PJ-5103  A3PJ-5122  A3PJ-
5124  A3PJ-5161  A3PJ-5162  A3PJ-5166  A3PJ-5201  A3PJ-5202  A3PJ-5207  A3PJ-5502  A3PJ-5600  A3PJ-5701-
05E  A3PJ-5701-12E  A3PJ-5702-06E  A3PJ-5702-12E  A3PJ-5702-24E  A3PJ-5703-24E  A3PJ-5706-24E  A3PJ-
5711-24E  A3PJ-5712-12E  A3PJ-5712-24E  A3PJ-5713-12E  A3PJ-5721-24E  A3PJ-5722-12E  A3PJ-5722-24E 
A3PJ-5723-12E  A3PJ-5723-24E  A3PJ-5726-12E  A3PJ-5731-24E  A3PJ-5732-05E  A3PJ-5732-12E  A3PJ-5732-24E
  A3PJ-5733-24E