FEATURES /
BENEFITS
RoHS Compliant
Unique multi-LED design provide superior illumination
High brightness with low current draw - uses up to 90% less
energy than incandescent
Long Life - up to 100K hours
True non-polarized design
No heat generated
Mounts directly into industry standard socket
Resistant to shock and vibration
Incorporating AlInGaP and InGaN technology
Colors include red, green, yellow, blue, and white
Dialight's line of based LED lamps is designed to directly
replace many popular subminiature and miniature incandescent
lamps. The benefits of LED technology over incandescent are
significant: They offer long life, are shock resistant, withstand
vibration and provide energy conservation.
586 Series
BASED LED
T1 3/4 WEDGE (T5)
SPECIFICATIONS
Measurements are typical
Dimensions are inches [mm]
Operating Voltages: 6, 12, 14, 24, and 28 VDC
Non-polarized
Operating temperature: -30oCto +85oC
Storage temperature: -40oCto +100oC
Replaces incandescent lamp numbers*: 79, 16,
84, 86, 18, 37, 70, 73, 74, 17, 85
* See Dialight’s Incandescent lamp/based LED
cross reference guide for a complete listing
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
CONSIDERATIONS
Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED.
If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses
which will optimize the light output.
Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.
Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.
Dialight does not recommend that based LED lamps be used in neon sockets.
MDEL586L001_B
.579
[14.71]
.232
[5.89]
Dialight reserves the right to make changes at any time
in order to supply the best product possible.