Installation Guide S30 Sensors - ac-Voltage Series Self-contained, ac-operated sensors Additional information on this product is immediately available online at www.bannerengineering.com/116158 View or download additional information, including excess gain curves, beam patterns and accessories. For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767. Sensing Mode Range LED Output - Opposed Polarized Retroreflective P R 60 m (200') 6 m (20') Infrared 950 nm Visible Red 680 nm LISTED 200 mm (8") cutoff Cabled Emitters Fixed Field 400 mm (16") cutoff Infrared 880 nm bn 20-250V ac bu QD Emitters (4-pin Micro-Style) rd/bk rd/wh 20-250V ac 600 mm (24") cutoff Model* S303E LO S30AW3R DO S30RW3R LO S30AW3LP DO S30RW3LP LO S30AW3FF200 DO S30RW3FF200 LO S30AW3FF400 DO S30RW3FF400 LO S30AW3FF600 DO S30RW3FF600 * Standard 2 m (6.5') cable models are listed. * 9 m (30') cable: add suffix "W/30" (e.g., S303E W/30). * 4-pin Micro-style QD models: add suffix "Q1" (e.g., S303EQ1). A model with a QD connector requires a mating cable. rd No connection gn Dimensions All Other Cabled Models QD Models Cabled Models bn 20-250V ac bu bk Yellow LED Output Indicator Load 2 m (6.5') Cable All Other QD Models (4-pin Micro-Style) Jam Nuts (2 Provided) Green LED Power Indicator M30 x 1.5 Thread rd/bk rd/wh rd gn ! Printed in USA 89.4 mm (3.52") 20-250V ac 80.7 mm (3.18") Load 65.0 mm (2.56") 65.0 mm (2.56") No Connection WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. 10/04 P/N 116158 S30 Sensors - ac-Voltage Series Specifications Supply Voltage and Current 20 to 250V ac (50/60 Hz). Average current: 20 mA Peak current: 200 mA at 20V ac, 500 mA at 120V ac, 750 mA at 250V ac Supply Protection Circuitry Protected against transient voltages Output Configuration SPST solid-state ac switch; Three-wire hookup; Choose light operate or dark operate models Light Operate: Output conducts when sensor sees its own (or the emitter's) modulated light Dark Operate: Output conducts when the sensor sees dark Output Rating 300 mA maximum (continuous); Fixed-Field Models: derate 5 mA/C above +50C (+122F) Inrush Capability 1 amp for 20 milliseconds, non-repetitive OFF-state leakage current: < 100 microamps ON-state saturation voltage: 3V at 300 mA ac; 2V at 15 mA ac Output Protection Circuitry Protected against false pulse on power-up Output Response Time Opposed Mode: 16 milliseconds ON, 8 milliseconds OFF Other Models: 16 milliseconds ON and OFF NOTE: 100 millisecond delay on power-up Repeatability Opposed Mode: 2 milliseconds Other Models: 4 milliseconds Repeatability and response are independent of signal strength. Indicators Two LEDs (Green and Yellow) Green ON steady: power to sensor is ON Yellow ON steady: sensor sees light Yellow flashing: excess gain marginal (1 to 1.5x) in light condition Construction PBT polyester housing; polycarbonate (opposed mode) or acrylic lens Environmental Rating Leakproof design rated NEMA 6P, DIN 40050 (IP69K) Connections 2 m (6.5') attached cable, or 4-pin Micro-style quick-disconnect fitting Operating Conditions Temperature: -40 to +70C (-40 to +158F); Maximum relative humidity: 90% at 50C (non-condensing) Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06" acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation) Certifications R LISTED Quick-Disconnect (QD) Cables Style 4-pin Micro-style Straight Model MQAC-406 MQAC-415 MQAC-430 Length 2 m (6.5') 5 m (15') 9 m (30') Dimensions Pin-Out 38 mm max. (1.5") 4-pin Micro-style Right-angle MQAC-406RA MQAC-415RA MQAC-430RA 2 m (6.5') 5 m (15') 9 m (30') Green Wire Red Wire Red/White Wire Red/Black Wire 38 mm max. (1.5") 1/2-20UNF-2B o 15 mm (0.6") Additional information on this product is immediately available online at www.bannerengineering.com/116158 View or download additional information, including excess gain curves, beam patterns and accessories. For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767. WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/N 116158 Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 * Phone: 763.544.3164 * www.bannerengineering.com * Email: sensors@bannerengineering.com